8 Client on Celeron 1,7
Hi, I've the Problem that I can't install the Oracle 8 Client on a Celeron 1,7 Machine with W2K.
I click on the startscreen on Install and then the Installation ends with no error-Message.
Do anyone know the Problem, and have a solution for it ?
Thanks
OK, ive read the Solution in an earlier Post:
copy the contents of the cd to your hard drive
rename any symcjit.dll files to symcjit.old
and then run the installer from the copied version
this aparently works
Similar Messages
-
Can't access Windows 7 network nor homegroup via router or ad-hoc
I have a really annoying problem. I have 2 clean computers. They were formatted and Win 7 ultimate was installed on both computers. They have a PCI wireless card (D-Link DWA 525). Their hardware is identical, same motherboard, etc, beside the "server"
is pentium 4 and the "client" is celeron.
We have 2 routers and 1 modem. The first router, Airport Extreme, act as DHCP server, and provides the wireless network. The second router (TimeCapsule), connected thought ethernet to the first router, extends the wireless network (act as a bridge). I can connect
to the network and the internet works fine.
The problem is with the local network.
I can see both computers on the network tab. I can ping both by IP and by name. I made a Homgroup on the computer "Server". The computer "client" joined. I can see the libraries. Both computer's firewall are disabled. All firewalls from
the routers and the modem are disabled.
Double-clicking the library on the Homegroup does nothing. Trying to access the shared folder by \SERVER or by the network tab gives error "network path not found".
Basic settings, like file and sharing, etc, are on. Password sharing is off. Encryption is 40 - 50 (not the 128, I don't remember the specific number).This is both for Home and Work and Public networks.
Because I couldn't access the network, I decided to make an ad-hoc. Same problems. Even with static IP (192.168.0.1 [server] and 192.168.0.3 [client], 255.255.255.0 subnet) and NetBios forced at enabled.
I just can't make it work. I have tried a lot of info from here and other forums, but nothing has work. The worst is that another PC will join the network, but I haven't do it yet just because I can't make these PCs to work. As a test, I did put the other PC
in the network (Win 7 Home), and the same problem applied.
All the computers can see them in the Network tab, ping either ways with both IP and name, but when trying to access the pc over network, it gives network path not found error.
Yes I have shared files.
Troubleshooting both Homegroup and Network finds nothing wrong or just can't fix the problem.
Please help!Hi,
I tried and received only errors (i don't remember know which ones).
However, I plugged the PCs via ethernet, let automatic IP address, and now I can access the network from both computers. Homegroups doesn't work because the network is public, but that isn't a matter right now, because I can access the files.
This makes me thing if the problem is the network adapter. In the Advanced tab on Device Manager Properties, I have the follow options, which I don't have idea what are they for:
AC_BE support APSD [disabled]
AC_BK support APSD [disabled]
AC_VI support APSD [disabled]
AC_VO support APSD [disabled]
APSD capable [disabled]
Multimedia/Gaming Environment [Enabled]
Roaming Sensitivity [Medium]
WMM Capable [Enabled]
Do you think some of that options are interfering?
Thank you -
Oracle 9i Lite and CPU problems
Are there any known problems with 9i Lite clients on Celeron or other CPU models ?
I know there were JVM related problems with one of the Oracle Universal Installers (been there) but this problem occurs when running msql to access the polite db.
eg.
msql system/x@polite
msql system/x@polite:polite
msql system/x@jdbc:polite:polite
All return a [POL-3013] bad database or invalid password error. Suspect that MSync does not work for the same reason.I also get the POL-3013 error message when trying to connect to the polite database as well as my own db. I can setup the user-dsn and run CREATEDB with no errors. I can even validate the db and no errors are reported. But I cannot use msql to connect to it. It used to work on my previous Win2k-machine with P4 cpu, but will not work with XP and Celeron.
-
Hello,
We have a Cisco ASA 5520 with the VPN PLus License and 8.04 IOS installed, we want to set up vpn access to our users. We can use the cisco VPN client which works on WIndows Platform, but we also have MAC OS 10.7 which works only with Cisco Anyconnect.
I am a little bit lost with all the client and the license, actually we can't setup more than 2 vpn session with an Anyconnect client installed on MAC or Windows. The authentication is by Certificate, the first two connect fine, but the third one don't connect and prompt for a username / password.
I joined a SH VER of my ASA, if anyome can tell me what is wrong on the license or perhaps it's a configuration problem?
Thanks a lot for the answer.
Mathieu.
fw-eps-02# sh ver
Cisco Adaptive Security Appliance Software Version 8.0(4)
Device Manager Version 6.4(1)
Compiled on Thu 07-Aug-08 20:53 by builders
System image file is "disk0:/asa804-k8.bin"
Config file at boot was "startup-config"
fw-eps-02 up 1 hour 36 mins
Hardware: ASA5520, 2048 MB RAM, CPU Pentium 4 Celeron 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash Firmware Hub @ 0xffe00000, 1024KB
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.05
0: Ext: GigabitEthernet0/0 : address is c84c.75da.9a58, irq 9
1: Ext: GigabitEthernet0/1 : address is c84c.75da.9a59, irq 9
2: Ext: GigabitEthernet0/2 : address is c84c.75da.9a5a, irq 9
3: Ext: GigabitEthernet0/3 : address is c84c.75da.9a5b, irq 9
4: Ext: Management0/0 : address is c84c.75da.9a5c, irq 11
5: Int: Not used : irq 11
6: Int: Not used : irq 5
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited
Maximum VLANs : 150
Inside Hosts : Unlimited
Failover : Active/Active
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Security Contexts : 2
GTP/GPRS : Disabled
VPN Peers : 750
WebVPN Peers : 2
AnyConnect for Mobile : Disabled
AnyConnect for Linksys phone : Disabled
Advanced Endpoint Assessment : Disabled
UC Proxy Sessions : 2
This platform has an ASA 5520 VPN Plus license.
Serial Number: JMX1433L0Y3
Running Activation Key: 0x3a17c153 0x8c141630 0xe0f3b5d4 0x86044ccc 0x47193392
Configuration register is 0x40 (will be 0x1 at next reload)
Configuration last modified by mgeffroy at 15:33:11.409 CEST Mon Jan 23 2012
fw-eps-02#why don't you use built-in client in mac osx? it supports certificate authentication also.
another solution would be to buy additional ssl vpn licences: there is a limit of two ssl vpn sessions by default.
Sent from Cisco Technical Support iPad App -
Hardware requirements to run Hyper-v clients
Can a thin client with a Celeron or atom processor be used as a thin client? I want to set up virtual machines for VDI that can do most basic home computer uses - but this would include streaming video's with good quality.
Hi,
As mentioned in the link posted by Steve, you can check the setting of Data Execution Prevention.
And according to the following blog, some hardware features that Hyper-V does not utilize and enabling them will prevent Hyper-V from loading. (If your BIOS doesn't have this hardware feature, then igonre this part)
(Hyper-V : What to
Disable in the BIOS)
Enable Hardware settings in BIOS to run Hyper V
http://blogs.technet.com/b/iftekhar/archive/2010/08/09/enable-hardware-settings-in-bios-to-run-hyper-v.aspx
Yolanda Zhu
TechNet Community Support -
AnyConnect Client profile: group-url in server-list with OGS doesn't work propertly
Cisco Adaptive Security Appliance Software Version 8.4(4)1
Device Manager Version 7.0(2)
Hardware: ASA5510, 1024 MB RAM, CPU Pentium 4 Celeron 1600 MHz
#show webvpn anyconnect
1.disk0:/anyconnect-win-3.1.00495-k9.pkg 1 dyn-regex=/Windows NT/
CISCO STC win2k+
3,1,00495
Hostscan Version 3.1.00495
Profile in atthach-file. After this profile is uploaded to client Optimal Gateway Selection doesn't work propertly:
When 'vpn1.mydomain.com/mygroup' (it best TTL server) is unreachable, then OGS try to be connected to other servers, but without group-url, for example 'vpn2.mydomain.com' (instead of 'vpn2.mydomain.com/mygroup')Anton,
It MIGHT be cosmetic:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtz92140
If not please open up a TAC case and provide DART for such a connection.
M. -
Error while opening a report in FRstudio client machine.
Hi,I'm getting below error while opening a report in FRstudio client machine. please help me if any of you resolved this issue earlier.
client laptop: 64bit windows7
hyperion version: 11.1.2.2
error msg:
"HARSnapin Initialize() Error -2147467259 - ; nested exception is:
java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
java.io.InvalidClassException: com.hyperion.reporting.graphics.GridObject; local class incompatible: stream classdesc serialVersionUID = 5432192847655595077, local class serialVersionUID = -5245705824007679661"
thanksI've seen umarshalling error when there is a difference between the client and server version. Is there a patch applied? I would recommend to uninstall the existing one and install if from Workspace. (this will ensure that you've the correct client version)
Regards
Celvin
http://www.orahyplabs.com -
View data in client B from client A in the same SID without a valid logon?
Hi Folks
We are planning on upgrading our 4.6C system to ERP 6.0, and are initialy considering having two clients in the same sandbox SID. One would be for the developers to perform code remediation checks (client A), and one would contain a copy of production data for performing testing of functionality over live data (client B).
Would it be possible to view data in client B from client A in the same system without a valid logon to client B or RFC connection to client B from client A? For example via the use on an ABAP program to SQL the database?
I know one can use transactions like SM30/SM31 to view, compare, and adjust data between clients, but this requires an RFC connection and valid logon to the target client.
Regards
Kevin.Hi Kevin.
>
Kevin McLatchie wrote:
> Would it be possible to view data in client B from client A in the same system without a valid logon to client B or RFC connection to client B from client A? For example via the use on an ABAP program to
Short answer: yes.
If someone has the right to write and execute ABAP reports on the system he is able to access the data of all clients. So I don't think that this setup is advisable. Don't mix development and production data in one system.
Best regards,
Jan -
View not displaying the data in some of the clients
Hi,
Apps - 12.1.3
DB 11gr1
OS- RHEL 5.6, 64 bit
We have an application which is built using .net , but the database is 11gR1 we are connecting vis ODAC ... it was working good.
But when we treid to move to other server, we created a user B , created a VIEW.
But we are facing one strange problem that - when i query its showing data in client PC , but when i ran it from Windows Server 2008 R2 edtion no data is displaying?
Any hints y?
ThanksHi;
Is there any error message in alert and also tns,listener log? If no than I suggest rise SR
Regard
Helios -
Podcast client downloads to wrong memory
The podcast client on my N95 8GB have begun the annoying habit of saving downloaded podcasts the the phone memory, and not to the 8GB mass storage unit, where it used to put them.
Any ideas on how to rectify this problem?The podcast client on my N95 8GB have begun the annoying habit of saving downloaded podcasts the the phone memory, and not to the 8GB mass storage unit, where it used to put them.
Any ideas on how to rectify this problem? -
Installation Problem on Pentium4 with ORACLE 8.1.7 Client
I tried to Install the ORACLE Client 8.1.7/8.1.6 on Pentium4 with NT platform. On inserting the CD it gave the first prompt and after Clicking the "INSTALL/DE-INSTALL PRODUCTS", system stops. Checking in the TaskManager helps us to know that 'setup.exe' and 'java.exe' were started for a fraction of the second and then stopped.
Tried to explore the issue and it seems that the JAVA version which ORACLE is using for the INSTALLATION of 8.1.7 is NonCompatible with the P4[NT Platform].
However, 8.0.5/8.0.6 Client version were successfully Installed on the same configuration.
Can Anyone help me out in Installing 8.1.6 on P4[NT base].
Thanks in advanceIs the machine you're trying to install on the
machine your display is running on?
If not, doing a
'xhost + name_of_machine_you_are_installing_on'
on the machine your display is running on should do the
trick.
Hope that helps.
M. Geselle -
Softphone feature for Cisco Jabber Client
Hello everyone,
I have a CUCM cluster v.8.6.2 and a CUPS v.8.6.4. I've installed my full CUWL licenses as well as my CUP Licenses AND the Jabber for Everyone COP file. I've managed to install Jabber on Mac and on Windows and have all the features such as Chat, Desktop phone integration and Visual Voicemail with Cisco Unity Connection working as well. The only feature I'm having a huge hassle getting to work is the Softphone feature. I've tried adding a CUPC device with the user (btw everything is integrated and uses LDAP for authentication) as the digest account for it as well as the Owner ID. I've tried adding a CSF device as well (I remember reading it somewhere) but the Jabber client never discovers a Softphone device and all of the options on the client are grayed out for me to put in the device settings. I thought I saw it once looking for a device name CSFACILLI (ACILLI being my username) in the System Diagnostics for the Jabber for Mac client but now it just shows:
Soft Phone Server
Server Address: cucm02.mycompany.net
Server Port: 2748
Server Protocol: --
Device: --
Line ID: --
Status: Disconnected
Any help or thoughts on this would be greatly appreciated! Thanks!
TonyAaron,
Here's the bit I found interesting from the reporting function:
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CCUCMClient::downloadConfig -- begin:
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CCUCMClient::getCnfFile -- begin: , strDeviceName.c_str()=CSFacill, bHttp=FALSE
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CTFTPClient::Get -- begin: , remotefile=CTLFile.tlv, host=cucm02.mycompany.net, bIsAsyMode=TRUE, port=69
-- 2012-07-25 08:31:01.000 DEBUG [0xb038d000] - TFTP_Error Select error
-- 2012-07-25 08:31:01.000 DEBUG [0xb038d000] - TFTP_Error Can't get packet, retrycount=3
-- 2012-07-25 08:31:01.000 DEBUG [0xb038d000] - CTFTPClient::ContinueGet -- end!
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CTFTPClient::Get -- end!
-- 2012-07-25 08:31:01.000 DEBUG [0xb038d000] - CTFTPClient::ReceiveData -- end!
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CCUCMClient::getCnfFile -- end!
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CCUCMClient::downloadConfig -- end!
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CPhone::setPhoneMode -- end!
-- 2012-07-25 08:31:01.000 DEBUG [0xb030b000] - CTFTPClient::ReceiveData -- begin: , nCookie=5, bIsAsyMode=TRUE
It looks like it's trying to get CTLFile.tlv from my TFTP servers (which are my subscribers). I went under TFTP File Management under OS Administration on the Subscribers and no such file exists. Is this something I have to download from Cisco? It does look like it's trying for the correct device, just can't get the Configuration File it needs... Your thoughts?
Thanks,
Tony -
Jabber Client softphone is "No Connected"
Hi,
I am trying to setup a lab for cisco partner testing. I created Collab 10.5 topology with cucm & cups 10.5. I am running out of ideas of what could be wrong. My jabber client for windows works with deskphone but it does not work with it's softphone (CSFXXXXX). Yes, i have CCMCIP profile created, user & device associated but still does not work both within lab network or external network
I am seeing the error below when I do a show connection status for the softphone - see attachment
Connection error. Ensure the server information in the Phone Services tab on the Options window is correct.
I do not have the "Phone Accounts" under options. I even uploaded jabber-config.xml file to tftp server and still no phone accounts tab. I can ping the cti hostname & ip from the pc i am working.
SOS
TIA
JeyaActually, I read it on a thread in this community. I just went thru’ the deployment guide and I saw that section too. I have uploaded it to the tftp server and no change for the phone tabs. Only the Directory service becomes online after uploading that file but no change on the phone account tabs. Below is the contents of the jabber-config.xml file that I generated using the file generator tool:
<?xml version="1.0" encoding="utf-8"?>
<config version="1.0">
<Options>
<StartCallWithVideo>false</StartCallWithVideo>
<Start_Client_On_Start_OS>true</Start_Client_On_Start_OS>
</Options>
<Phone>
<TftpServer1>hq-cucm-pub.abc.inc</TftpServer1>
<CtiServer1>hq-cucm-pub.abc.inc</CtiServer1>
<CcmcipServer1>hq-cucm-pub.abc.inc</CcmcipServer1>
</Phone>
<Policies>
<EnableSIPURIDialling>true</EnableSIPURIDialling>
<DirectoryURI>mail</DirectoryURI>
<ServicesDomainSsoEmailPrompt>OFF</ServicesDomainSsoEmailPrompt>
</Policies>
<Presence>
<PresenceServerAddress>hq-cups.abc.inc</PresenceServerAddress>
</Presence>
<Directory>
<ConnectionType>1</ConnectionType>
<PrimaryServerName>directory.abc.inc</PrimaryServerName>
<BDIPrimaryServerName>directory.abc.inc</BDIPrimaryServerName>
<ServerPort1>389</ServerPort1>
<BDIServerPort1>389</BDIServerPort1>
<UseWindowsCredentials>0</UseWindowsCredentials>
<ConnectionUsername>Administrator</ConnectionUsername>
<BDIConnectionUsername>Administrator</BDIConnectionUsername>
<ConnectionPassword>1vtG@lw@y</ConnectionPassword>
<BDIConnectionPassword>1vtG@lw@y</BDIConnectionPassword>
</Directory>
</config>
Thks!
Jeya -
How to delete file from client machine
Hi all,
we are using the DataBase: oracle:10g,
and forms/reports 10g(developer suite 10g-10.1.2.2).
can anybody help me how to delete the file from client machine in specified location using webutil or any
(i tried with webutil_host & client_host but it is working for application server only)
thank you.hi
check this not tested.
PROCEDURE OPEN_FILE (V_ID_DOC IN VARCHAR2)
IS
-- Open a stored document --
LC$Cmd Varchar2(1280) ;
LC$Nom Varchar2(1000) ;
LC$Fic Varchar2(1280);
LC$Path Varchar2(1280);
LC$Sep Varchar2(1) ;
LN$But Pls_Integer ;
LB$Ok Boolean ;
-- Current Process ID --
ret WEBUTIL_HOST.PROCESS_ID ;
V_FICHERO VARCHAR2(500);
COMILLA VARCHAR2(4) := '''';
BOTON NUMBER;
MODO VARCHAR2(50);
URL VARCHAR2(500);
Begin
V_FICHERO := V_ID_DOC;
LC$Sep := '\';--WEBUTIL_FILE.Get_File_Separator ; -- 10g
LC$Nom := V_FICHERO;--Substr( V_FICHERO, instr( V_FICHERO, LC$Sep, -1 ) + 1, 100 ) ;
--LC$Path := CLIENT_WIN_API_ENVIRONMENT.Get_Temp_Directory ;
LC$Path := 'C:';
LC$Fic := LC$Path || LC$Sep || LC$Nom ;
If Not webutil_file_transfer.DB_To_Client
LC$Fic,
'TABLE_NAME',
'ITEM_NAME',
'WHERE'
) Then
Raise Form_trigger_Failure ;
End if ;
LC$Cmd := 'cmd /c start "" /MAX /WAIT "' || LC$Fic || '"' ;
Ret := WEBUTIL_HOST.blocking( LC$Cmd ) ;
LN$But := WEBUTIL_HOST.Get_return_Code( Ret ) ;
If LN$But 0 Then
Set_Alert_Property( 'ALER_STOP_1', TITLE, 'Host() command' ) ;
Set_Alert_Property( 'ALER_STOP_1', ALERT_MESSAGE_TEXT, 'Host() command error : ' || To_Char( LN$But ) ) ;
LN$But := Show_Alert( 'ALER_STOP_1' ) ;
LB$Ok := WEBUTIL_FILE.DELETE_FILE( LC$Fic ) ;
Raise Form_Trigger_Failure ;
End if ;
If Not webutil_file_transfer.Client_To_DB
LC$Fic,
'TABLE_NAME',
'ITEM_NAME',
'WHERE'
) Then
NULL;
Else
Commit ;
End if ;
LB$Ok := WEBUTIL_FILE.DELETE_FILE( LC$Fic ) ;
Exception
When Form_Trigger_Failure Then
Raise ;
End ;sarah -
Remote Access VPN Clients Cannot Access inside LAN
I have been asked to set up remote access VPN on an ASA 5505 that I previously had no invlovement with. I have set it up the VPN using the wizard, they way I normally do, but the clients have no access to anything in the inside subnet, not even the inside interface IP address of the ASA. Thay can ping each other. The remote access policy below that I am working on is labeled VPNPHONE, address pool 172.16.20.1-10. I do not need split tunneling to be enabled. The active WAN interface is the one labeled outside_cable.
: Saved
ASA Version 8.2(1)
hostname ASA5505
domain-name default.domain.invalid
enable password eelnBRz68aYSzHyz encrypted
passwd eelnBRz68aYSzHyz encrypted
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.100.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group dataDSL
ip address 76.244.75.57 255.255.255.255 pppoe
interface Vlan3
nameif dmz
security-level 50
ip address 192.168.9.1 255.255.255.0
interface Vlan10
nameif outside_cable
security-level 0
ip address 50.84.96.178 255.255.255.240
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
switchport access vlan 10
interface Ethernet0/2
switchport access vlan 3
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
clock timezone CST -6
clock summer-time CDT recurring
dns server-group DefaultDNS
domain-name default.domain.invalid
same-security-traffic permit intra-interface
object-group service Netbios udp
port-object eq 139
port-object eq 445
port-object eq netbios-ns
object-group service Netbios_TCP tcp
port-object eq 445
port-object eq netbios-ssn
object-group network DM_INLINE_NETWORK_1
network-object host 192.168.100.177
network-object host 192.168.100.249
object-group service Web_Services tcp
port-object eq ftp
port-object eq ftp-data
port-object eq www
port-object eq https
object-group network DM_INLINE_NETWORK_10
network-object host 192.168.9.10
network-object host 192.168.9.4
object-group network DM_INLINE_NETWORK_11
network-object host 192.168.9.10
network-object host 192.168.9.4
object-group network DM_INLINE_NETWORK_2
network-object host 192.168.9.10
network-object host 192.168.9.4
object-group network DM_INLINE_NETWORK_3
network-object host 192.168.9.10
network-object host 192.168.9.4
object-group network DM_INLINE_NETWORK_4
network-object host 192.168.9.10
network-object host 192.168.9.4
object-group network DM_INLINE_NETWORK_5
network-object host 192.168.9.10
network-object host 192.168.9.4
object-group network DM_INLINE_NETWORK_6
network-object host 192.168.9.10
network-object host 192.168.9.4
object-group network DM_INLINE_NETWORK_7
network-object host 192.168.9.10
network-object host 192.168.9.4
object-group network DM_INLINE_NETWORK_8
network-object host 192.168.9.10
network-object host 192.168.9.4
object-group network DM_INLINE_NETWORK_9
network-object host 192.168.9.10
network-object host 192.168.9.4
object-group network VPN
network-object 192.168.255.0 255.255.255.0
access-list outside_access_in extended permit icmp any host 76.244.75.61
access-list outside_access_in extended permit tcp any host 76.244.75.61 eq ftp
access-list outside_access_in extended permit tcp any host 76.244.75.61 eq ftp-data
access-list outside_access_in extended permit tcp any host 76.244.75.62 eq www
access-list outside_access_in extended permit tcp any host 76.244.75.62 eq https
access-list outside_access_in extended permit tcp any host 76.244.75.59 eq www
access-list outside_access_in extended permit tcp any host 76.244.75.59 eq https
access-list outside_access_in extended permit tcp any host 76.244.75.60 eq www
access-list outside_access_in extended permit tcp any host 76.244.75.60 eq https
access-list outside_access_in extended permit tcp any host 76.244.75.58 eq www
access-list outside_access_in extended permit tcp any host 76.244.75.58 eq https
access-list dmz_access_in remark Quickbooks
access-list dmz_access_in extended permit tcp object-group DM_INLINE_NETWORK_6 host 192.168.100.5 eq 56719
access-list dmz_access_in remark Quickbooks range
access-list dmz_access_in extended permit tcp object-group DM_INLINE_NETWORK_7 host 192.168.100.5 range 55333 55337
access-list dmz_access_in extended permit udp object-group DM_INLINE_NETWORK_8 host 192.168.100.5 eq 1434
access-list dmz_access_in extended permit tcp object-group DM_INLINE_NETWORK_9 host 192.168.100.5 eq 49398
access-list dmz_access_in remark QB
access-list dmz_access_in extended permit tcp object-group DM_INLINE_NETWORK_10 host 192.168.100.5 eq 8019
access-list dmz_access_in extended permit udp object-group DM_INLINE_NETWORK_2 host 192.168.100.5 eq 2638
access-list dmz_access_in extended permit udp object-group DM_INLINE_NETWORK_11 host 192.168.100.5 object-group Netbios
access-list dmz_access_in extended permit tcp object-group DM_INLINE_NETWORK_3 host 192.168.100.5 object-group Netbios_TCP
access-list dmz_access_in extended deny ip host 192.168.9.4 host 192.168.100.5 inactive
access-list dmz_access_in extended permit udp object-group DM_INLINE_NETWORK_4 any
access-list dmz_access_in extended permit tcp object-group DM_INLINE_NETWORK_5 any
access-list dmz_access_in remark Printer
access-list dmz_access_in extended permit ip 192.168.9.0 255.255.255.0 object-group DM_INLINE_NETWORK_1
access-list dmz_access_in extended permit tcp 192.168.9.0 255.255.255.0 any object-group Web_Services
access-list dmz_access_in extended permit udp 192.168.9.0 255.255.255.0 any eq domain
access-list dmz_access_in extended permit icmp 192.168.9.0 255.255.255.0 192.168.255.0 255.255.255.0 echo-reply
access-list dmz_access_in extended permit icmp 192.168.9.0 255.255.255.0 192.168.100.0 255.255.255.0 echo-reply log disable
access-list dmz_access_in remark QB probably does not need any udp
access-list dmz_access_in extended permit udp host 192.168.9.4 host 192.168.100.5 eq 55333 inactive
access-list dmz_access_in remark QB included in other rule range
access-list dmz_access_in extended permit tcp host 192.168.9.4 host 192.168.100.5 eq 55333 inactive
access-list dmz_access_in remark May be required for Quickbooks
access-list dmz_access_in extended permit icmp host 192.168.9.4 host 192.168.100.5
access-list CAD_capture extended permit ip host 192.168.9.4 host 192.168.100.5
access-list CAD_capture extended permit ip host 192.168.100.5 host 192.168.9.4
access-list inside_nat0_outbound extended permit ip any 192.168.255.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip any 192.168.255.0 255.255.255.240
access-list inside_nat0_outbound extended permit ip any 172.16.10.0 255.255.255.240
access-list inside_nat0_outbound extended permit ip any 172.16.20.0 255.255.255.240
access-list cad_supplies_RAVPN_splitTunnelAcl standard permit 192.168.100.0 255.255.255.0
access-list cad_supplies_RAVPN_splitTunnelAcl standard permit 192.168.9.0 255.255.255.0
access-list dmz_nat0_outbound extended permit ip any 192.168.255.0 255.255.255.0
access-list outside_cable_access_in extended permit icmp any host 50.84.96.182
access-list outside_cable_access_in extended permit tcp any host 50.84.96.182 eq ftp
access-list outside_cable_access_in extended permit tcp any host 50.84.96.182 eq ftp-data
access-list outside_cable_access_in extended permit tcp any host 50.84.96.183 eq www
access-list outside_cable_access_in extended permit tcp any host 50.84.96.183 eq https
access-list outside_cable_access_in extended permit tcp any host 50.84.96.180 eq www
access-list outside_cable_access_in extended permit tcp any host 50.84.96.180 eq https
access-list outside_cable_access_in extended permit tcp any host 50.84.96.181 eq www
access-list outside_cable_access_in extended permit tcp any host 50.84.96.181 eq https
access-list outside_cable_access_in extended permit tcp any host 50.84.96.179 eq www
access-list outside_cable_access_in extended permit tcp any host 50.84.96.179 eq https
access-list Local_LAN_Access standard permit host 0.0.0.0
access-list vpnusers_spitTunnelACL extended permit ip 192.168.100.0 255.255.255.0 any
access-list nonat-in extended permit ip 192.168.100.0 255.255.255.0 172.16.20.0 255.255.255.0
pager lines 24
logging enable
logging buffered informational
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu dmz 1500
mtu outside_cable 1500
ip local pool VPN_IP_range 192.168.255.1-192.168.255.10 mask 255.255.255.0
ip local pool VPN_Phone 172.16.20.1-172.16.20.10 mask 255.255.255.0
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat-control
global (outside) 10 interface
global (outside_cable) 10 interface
nat (inside) 0 access-list nonat-in
nat (inside) 10 0.0.0.0 0.0.0.0
nat (dmz) 0 access-list dmz_nat0_outbound
nat (dmz) 10 0.0.0.0 0.0.0.0
static (inside,outside) 76.244.75.62 192.168.100.25 netmask 255.255.255.255 dns
static (dmz,outside) 76.244.75.61 192.168.9.123 netmask 255.255.255.255 dns
static (dmz,outside) 76.244.75.59 192.168.9.124 netmask 255.255.255.255 dns
static (dmz,outside) 76.244.75.58 192.168.9.4 netmask 255.255.255.255 dns
static (inside,dmz) 192.168.100.0 192.168.100.0 netmask 255.255.255.0
static (dmz,outside) 76.244.75.60 192.168.9.10 netmask 255.255.255.255 dns
static (inside,outside_cable) 50.84.96.183 192.168.100.25 netmask 255.255.255.255 dns
static (dmz,outside_cable) 50.84.96.182 192.168.9.123 netmask 255.255.255.255 dns
static (dmz,outside_cable) 50.84.96.180 192.168.9.124 netmask 255.255.255.255 dns
static (dmz,outside_cable) 50.84.96.179 192.168.9.4 netmask 255.255.255.255 dns
static (dmz,outside_cable) 50.84.96.181 192.168.9.10 netmask 255.255.255.255 dns
access-group outside_access_in in interface outside
access-group dmz_access_in in interface dmz
access-group outside_cable_access_in in interface outside_cable
route outside_cable 0.0.0.0 0.0.0.0 50.84.96.177 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.1.0 255.255.255.0 inside
http 192.168.100.0 255.255.255.0 inside
http 204.107.173.0 255.255.255.0 outside
http 204.107.173.0 255.255.255.0 outside_cable
http 0.0.0.0 0.0.0.0 outside_cable
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac
crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_cable_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_cable_map interface outside_cable
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map inside_map interface inside
crypto isakmp enable inside
crypto isakmp enable outside
crypto isakmp enable outside_cable
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
telnet 192.168.100.0 255.255.255.0 inside
telnet timeout 5
ssh 192.168.100.0 255.255.255.0 inside
ssh 204.107.173.0 255.255.255.0 outside
ssh 204.107.173.0 255.255.255.0 outside_cable
ssh 0.0.0.0 0.0.0.0 outside_cable
ssh timeout 15
console timeout 0
vpdn group dataDSL request dialout pppoe
vpdn group dataDSL localname [email protected]
vpdn group dataDSL ppp authentication pap
vpdn username [email protected] password *********
dhcpd address 192.168.100.30-192.168.100.99 inside
dhcpd dns 192.168.100.5 68.94.156.1 interface inside
threat-detection basic-threat
threat-detection statistics port
threat-detection statistics protocol
threat-detection statistics access-list
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
webvpn
group-policy DefaultRAGroup internal
group-policy DefaultRAGroup attributes
dns-server value 192.168.100.5
vpn-tunnel-protocol IPSec l2tp-ipsec
group-policy cad_supplies_RAVPN internal
group-policy cad_supplies_RAVPN attributes
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value cad_supplies_RAVPN_splitTunnelAcl
group-policy VPNPHONE internal
group-policy VPNPHONE attributes
dns-server value 192.168.100.5
vpn-tunnel-protocol IPSec
split-tunnel-policy excludespecified
split-tunnel-network-list value Local_LAN_Access
client-firewall none
client-access-rule none
username swinc password BlhBNWfh7XoeHcQC encrypted
username swinc attributes
vpn-group-policy cad_supplies_RAVPN
username meredithp password L3lRjzwb7TnwOyZ1 encrypted
username meredithp attributes
vpn-group-policy cad_supplies_RAVPN
service-type remote-access
username ipphone1 password LOjpmeIOshVdCSOU encrypted privilege 0
username ipphone1 attributes
vpn-group-policy VPNPHONE
username ipphone2 password LOjpmeIOshVdCSOU encrypted privilege 0
username ipphone2 attributes
vpn-group-policy VPNPHONE
username ipphone3 password LOjpmeIOshVdCSOU encrypted privilege 0
username ipphone3 attributes
vpn-group-policy VPNPHONE
username oethera password WKJxJq7L6wmktFNt encrypted
username oethera attributes
vpn-group-policy cad_supplies_RAVPN
service-type remote-access
username markh password nqH+bk6vj0fR83ai0SAxkg== nt-encrypted
username markh attributes
vpn-group-policy cad_supplies_RAVPN
tunnel-group DefaultRAGroup general-attributes
default-group-policy DefaultRAGroup
tunnel-group DefaultRAGroup ipsec-attributes
pre-shared-key *
tunnel-group DefaultRAGroup ppp-attributes
authentication ms-chap-v2
tunnel-group cad_supplies_RAVPN type remote-access
tunnel-group cad_supplies_RAVPN general-attributes
address-pool VPN_IP_range
default-group-policy cad_supplies_RAVPN
tunnel-group cad_supplies_RAVPN ipsec-attributes
pre-shared-key *
tunnel-group VPNPHONE type remote-access
tunnel-group VPNPHONE general-attributes
address-pool VPN_Phone
default-group-policy VPNPHONE
tunnel-group VPNPHONE ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 1500
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:8b25ecc61861a2baa6d2556a3679cc7c
: endHi,
You have your "group-policy" set so that you have excluding some networks from being tunneled.
In this access-list named Local_LAN_Access you specify "0.0.0.0"
Doesnt this mean you are excluding all networks from being tunneled? In other words no traffic goes to your tunnel.
This access-list should only contain your local LAN network from where you are connecting with the VPN Client. If you dont need to access anything on your local LAN while having the VPN on, you don't even need this setting on. You could just tunnel all traffic instead of excluding some networks.
- Jouni
Maybe you are looking for
-
Change pointer perfomance issue(bd22)
Hi, we are using message type HRMD_A to transfer the employee change data using the program RBDMIDOC. we are checking two table BDCP n BDCPS, but because of large number of data we r facing a perfomance issue here. I read in one forum about transacti
-
IDOC error - same client same system
Hi guru, i have a requiremnt to generate the IDOC for the same and same client. actually i have to get the data from application server and i have to generate the IDOC. for this i have created a Zreport and passed the data from application server to
-
Aperture Workflow - need help creating workflow for photo management
Hi - I currently shoot with a Canon SD890 (point & shoot) and a Nikon D300 (SLR). My photography is either personal photography or street photography. I may use some of my photography for a web project but that should not be considered right now. I s
-
What shall I do with my ipod touch?
-
[Solved] Syslinux: changing menu position on screen?
Hi there! I'm trying to adjust the menu-position in syslinux to get the menu out of the upper left corner. I'm using a 1920x1080 resolution with a fitting backgroundimage. But I cannot find any information about how to use parameters like "VSHIFT" in