80 gig and 60 gig!

can a 80 gig hold a lot of programs or a little bit???!!!
help me out i dont really know about that.haha
do me clean and help me

I'm not sure I'm getting this right, please clear this one out for me:
I want to install a third IDE HDD (60GB), since both IDE1 & IDE2 are occupied, can I use the third IDE3 connector for this purpose?
If yes, is there anything else who needs to be done? Like do I have to enable in the BIOS or any other setting(s)?

Similar Messages

Have family plan with 250 data which I almost use each month. Going on vacation and will be on the road for two weeks. Should I up my data for a month then change back. Is it worth it or should I just run over and pay the extra 15 per gig?

have family plan with 250 data which I almost use each month. Going on vacation and will be on the road for two weeks. Should I up my data for a month then change back. Is it worth it or should I just run over and pay the extra 15 per gig?

Hello mlazaretti. Vacation time is awesome. (Especially a road trip!) Since you will be going out for two weeks, you never know if having extra data may come in handy. I highly recommend switching to the next tier up so this way you have more data. This way it is only $10.00 more versus $15.00, and you dont have to worry about overages. Then change back at the start of the next billing cycle.
If you need help making this change let us know! Have a safe trip!
NicandroN_VZW
Follow us on twitter @VZWSupport

I have a Mac Book Pro with a 320 gig hdd and my drive is corrupted and I can't engage it. So I would like to switch to a 1 terabyte drive can this be done?

I have a Mac Book Pro with a 320hdd, 2.33 processor, 8 gigs of RAM and OS X 10.9.4 . My hdd crashed and I cannot access it so is it possible to install a 1 terabyte drive with the operating software already installed and also upgrade my RAM to 16 gigs?

If I were you I'd install a small SSD as the boot drive from OWC:
http://eshop.macsales.com/shop/SSD/OWC
Then put a second large conventional drive either in the optical bay (Data Doubler) or in an external.
You don't say which MBP you have: Size, CPU type.
Also when you upgrade you could see if you can salvage your data from your old HD. Can you hear it spin up? If so Data Rescue IV.

I have a iPhone 5. In usage, it says i have 2.1 gigs used because of photos and camera. I have deleted all my photos via iPhoto and now reset the phone back to factory settings in order to try to solve this problem, to no avail. Help!

I have a iPhone 5. In usage, it says i have 2.1 gigs used because of photos and camera. I have deleted all my photos via iPhoto and now reset the phone back to factory settings in order to try to solve this problem, to no avail. Both iTunes and the phone say that 2.1 gigs are being used, even though the phone now has nothing on it. What is going on?

Yeah it works fine over wifi the problem is when I try to use it over my 3G. It's really stressing me out now.

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help?

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help? FYI: I have been using boot camp with windows 7 and started getting a kernal_data_Page_error and it would reboot windows, i was trying to do a chkdsk on the next reboot, but thats when i started getting this issue. I have put in a new hard drive and went from 2 gigs to 4. I can not get the computer to do anything, even the monitor does not show anything now????

Prep your new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs,) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
After formatting has completed quit DU and return to the installer. Install OS X.

How do I get more memory on my IMAC .I have 1 GIG and to run LION you need 2 GIGS?

How do I get more memory on my IMAC .I have 1 GIG and to run LION you need 2 GIGS?

Depends on the Mac; what model and processor is it?
 > 'about this Mac' > 'more info'
In the first section (hardware overview) post this info;
Nothing below that is reqd, especially not the serial number.

Memory on my macbook air keeps disappearing. I have 120 gigs and I am down to 150mb without adding any files.

Memory on my macbook air keeps disappearing. I have 120 gigs and I am down to 150mb without adding any files.

Thanks...I have tried the various options and the only item of interest is that my only account on this computer says it has 102 gig of memory used up. However, when I open and look at the individual files, they add up to less than 15 gigs.

Crackling, Left Rear Channel noise, IRQs, 4 Gigs of Memory, fixes and problems with XFi Fatal

Hello fellow troubleshooters. Well I've been working on my XFI issues since there are so many of them trying to make the one piece in my newly built system work as intended. I will put my hardware info below this post for comparison purposes if it helps you at all or for feedback/ideas. Well first off I had the crackling noise popping so on even when my machine was idle. If you have not done this yet do it
!!! Start, Control Panel, Sounds Speech and Audio Device, Change Speaker Settings, Advanced (in device volume), ok now there is a bunch of sliders go to "options" check everything, ok now that you see all the sliders mute Everything besides: Play Control, Wave, CD Player for testing purpose. You will probably hear a difference as you do it. Especially Mic 2. Ok well that issue resolved my popping crackling noises when idle. Ok so I still have a shared IRQ issue since I have an Asus A8N32-SLI Deluxe board and the slots go as such PCI-E, PCI, PCI, PCI-E, PCI. Well since the GeForce 7800 GTX cards I have take up not just the PCI-E slot, but also the PCI slot is covered from the Huge Fan. Then the Same thing for the Second graphics card. So I have only one slot that works for my PCI Fatalty sound card. Well this forces me to share PCI IRQ between one of the Video Cards and the Sound Card. Its not a "conflict" it is simply sharing the IRQ, after the above issue fixed my popping issue this no longer was a concern. Now my big issue is that I sent my Sub Woofer in for RMA, I have the Gigaworks S750 7. THX speakers, they are great but when I really crank up the volume on them I would get the sound like a speaker was blown in the left rear channel, so I swapped another speaker in its place and I have the same problem. So the RMA folks said to send in the Sub Woofer which cost me over $30 to ship the thing only to have them tell me there is no problem. Well I had recently done RMAs on my sound card, both Video Cards, and my mother board too in hopes of fixing the next problem. So everything is new though I got a refurb on the mobo. So I'm just waiting on my Sub woofer now so I'm using my headphones and guess what I'm finding there is this noise in the left speaker, an issue I sent the headphones back for a long time ago when I was using them waiting to buy my speakers. I have the Creative Pro Gamer headphones. So now I read a post about someone else with the same issue left channel, and I have to wonder I am not alone and that usually means in Creative Labs land there probably is others with this issue that have spouses that wont let them stretch their audiophile legs with extreme volume, if this is you try it out kick up the bass, and see if you have this problem too, if so please post it here. I have no clue on this one and I am open to any ideas. Ok and the last issue!! This is the real problem I'm facing now. I play EQ2 I love my MMO titles with the occassional single player title for those short stints at the computer between work, parenting, and stuff my wife demands be started before she finishes speaking of it (those of you married know what I'm talking about). I have 2 operating systems, XP Home, and XP Pro 64. Home I use for Office, graphic design, and general applications. XP Pro 64 I use purely for gaming. All my games are installed through this OS which is on my 2 74 Gig Raptors in Raid 0, I have another Partition for XP Home, and a 3rd for all the game installs. So I recently found that after selecting Extreme Graphics option in EQ2 then moving the rest of the sliders to Max that my G5 keyboard which has a performance monitor in it showing the amount of Ram usage showed me hitting about 90% and would spilke at the same time as I found I had frame rate slowdown. So I decided to get 2 more gigs of Corsair Twin XMS 3500Pro 024x2 memory bumping me up to 4 gigs. Well I had to go into the bios I found and change a memory setting to discrete and enable the memory hole in order for XP Pro 64 and the motherboard to see the memory. At this time I was working on other things with my computer, and suddenly the popping noise came back so I'm pissed now.... But oddly its not happening in XP home, only in XP 64. So I'm thinking I may have to go to XP home for my gaming OS, then just before I install home I remember that XP home wont register 4 gigs of memory.... So I go turn off the memory hole and discrete settings and this sets the memory to 2 gigs.... Crackling sound in ALL EAX GAMES goes away.... So now clearly my issue with my sound card and EAX crackling noise is Memory related somehow. Now I have isolated it to 4 gigs of memory, but it makes me think of those folks with this issue perhaps something is amiss with their memory and how it works with timing, or onboard memory on the sound card which is a first time memory is put on a sound card?.... Any input is appreciated as to how to repair this issue, thanks for reading, below is my system set up.
rocessor >
?Model:???? x AMD Athlon(tm) 64 X2 Dual Core Processor
??????4400+
?Speed:???? 2.2GHz
?Model Number:???? 4400 (estimated)
?Performance Rating:??? PR7072 (estimated)
?Cores per Processor:?? 2 Unit(s)
?Threads per Core:??? Unit(s)
?Type:????? Dual-Core
?Internal Data Cache:?? 2x 64kB Synchronous, Write-Back, 2-way set,
??????64 byte line size
?L2 On-board Cache:?? 2x MB ECC Synchronous, Write-Back, 6-way
??????set, 64 byte line size
?<Mainboard >
?Bus(es):???? ISA PCI PCIe USB FireWire/394 i2c/SMBus
?MP Support:???? 2 Processor(s)
?MP APIC:???? No
?System BIOS:??? American Megatrends Inc. 8.2
?System:????? System manufacturer System Product Name
?Mainboard:???? ASUSTeK Computer INC. A8N32-SLI-Deluxe
?Total Memory:???? 3.9GB DDR-SDRAM
?<Chipset >
?Model:???? Advanced Micro Devices (AMD) Athlon 64 /
??????Opteron HyperTransport Technology
??????Configuration
?Front Side Bus Speed:?? 2x 005MHz (200MHz data rate)
?Total Memory:???? 4GB DDR-SDRAM
?Memory Bus Speed:??? 2x 200MHz (400MHz data rate)
?<Video System >
?Monitor/Panel:??? Default Monitor
?Monitor/Panel:??? HP D895 HP P20 2-inch Monitor
?Adapter:???? NVIDIA GeForce 7800 GTX
?Adapter:???? NVIDIA GeForce 7800 GTX
?hysical Storage Devices >
?Removable Dri've:??? Floppy disk dri've
?Hard Disk:???? WDC WD2500KS-00MJB0 (233GB)
?Hard Disk:???? WDC WD3200JD-00KLB0 (298GB)
?Hard Disk:???? NVIDIA? STRIPE? 38.49G
?Hard Disk:???? Generic USB CF Reader USB Device
?Hard Disk:???? Generic USB MS Reader USB Device
?Hard Disk:???? Generic USB SD Reader USB Device
?Hard Disk:???? Generic USB SM Reader USB Device
?CD-ROM/DVD:???? HL-DT-ST DVD-ROM GDR860B (CD 48X Rd) (DVD 6X
??????Rd)
?CD-ROM/DVD:???? HL-DT-ST DVD-ROM GDR860B (CD 48X Rd) (DVD 6X
??????Rd)
?CD-ROM/DVD:???? HL-DT-ST DVD-ROM GDR860B (CD 48X Rd) (DVD 6X
??????Rd)
?CD-ROM/DVD:???? HL-DT-ST DVDRAM GSA-463B (CD 40X Rd, 40X Wr)
??????(DVD 5X Rd, 5X Wr)
?<Logical Storage Devices >
?.44MB 3.5" (A:??? N/A
?Applications - games - storage:233GB (5GB, 65% Free Space) (NTFS)
?Xp home (D:???? 24GB (5.6GB, 23% Free Space) (NTFS)
?CD-ROM/DVD (E:??? N/A
?Xp 64 (F:???? 24GB (5GB, 63% Free Space) (NTFS)
?Raptor games (G:?? 90GB (7GB, 8% Free Space) (NTFS)
?Ssdisk (H:???? 629MB (CDFS)
?Bf2xpack cd (I:??? 677MB (CDFS)
?Farstone (J:??? 00MB (CDFS)
?Removable Dri've (K:?? N/A
?Removable Dri've (L:?? N/A
?Removable Dri've (M:?? N/A
?Back up dri've (N:??? 298GB (3GB, 44% Free Space) (NTFS)
?Removable Dri've (O:?? N/A?EvolovE

Evolve,
I have the a8n-sli Premium which as you stated is basically the same board with a couple extra items. I have the latest beta bios ver -06. Since the early fall release the option which we will be talking about was available in the premium board which it I remember was Bios rev 9. I would download the latest bios rev.
07.04 (latest beta?or go with 06)?and flash in. Here are the steps to get the proper memory options to work and I have also included my system specs to compare.
) Hit Del to get into Bios
2) Go to the second tab on the top of the screen "Advanced"
3) Select the first option in the menu "CPU Configuration"
4) Select the first option in the "CPU Configuration" menu called "DRAM Configuration"
5) Select Manual configuration from the first Menu item.
6) The last two options in the same menu for DRAM are s/w remapping over 4G and h/w remapping over 4G. Select the "s/w remapping option over 4G" and enable it. Disable the "h/w remapping over 4G."?
7) Hit f0 and save the config.
You should now at post have 4GBws total but only 3GBs of usable memory and your X-fi should crush it in XP64 and XP32.
My Specs
A8n-sli premium (Bios -06)
amd X2 4400 (~2.5 GHZ)
4GB LL patriot memory (~228 HZ)
X-Fi Extreme Music
LSI 320-2e PCI express SCSI RAID controller (256MB buffer)
2x Seagate Cheata 5K.3?dri'ves
All water cooled
Good Luck
PapaH
By the way this is defiantly a XP64 driver problem because even with h/w remapping enabled in XP32 the card sounds fine. It only happens in XP64.

My ipod wont update any apps, it says something about storage managment but i have 4 gigs left and all of my iclous storage left. Is their ayway to fix this

my app store wont let me update any apps when i click the update all button it doesnt do anything and eventually says i need to manage my storage, i have 4.4 gigs left and all of my icloud storage left and i just deleted 5 app hoping it would make room but it didnt work. is there something that happened to itouch 3rd gen during th ios5 update or something? please let me know if there is anything i can do

it says something about storage management
Try these support articles...
iCloud: Managing your iCloud storage
iCloud: Purchasing iCloud Storage and Billing

Airport Extreme and 500 Gig drive

I have 27 MacBook's in a mobile lab connected to a brand new Airport Extreme. The Airport Extreme serves up a 500 Gig drive that (during my tests) I can connect to flawlessly.
My laptops all have the user, "Student." In the dock on the Student account, I have a folder that is located on the AP Extreme hard drive that I want my students to access.
During my instruction to the students, I had them all click the folder in their docks so they could see the contents of said folder. There's only 6 sub folders, so it's not like a heavy load showing previews or anything.
20 computers connected to the disk successfully (there's no password to see the contents) and 7 didn't. The 7 that didn't asked for a password to the disk when there isn't one.
So I took one of the non-working computers from a student and tried to open a file in MS Word. I clicked on the base station in the list of available servers (on the left side of the open sheet). A message popped up on the screen that said I'd reached the maximum number of clients that can access that resource. ...so I opened up the Airport Utility and counted the computers connected to the base station. 27.
I've looked high and low for documentation from Apple that states that only 20 computers can use the "Air Disk" simultaneously. All of their documents say that 50 devices can connect to the base station wirelessly. Nothing about a lesser number connecting to the hard drive.
I really want to have made a mistake somewhere in my setup. Though it seems to be idiot proof.
Can anyone confirm or deny my findings? Or can someone point out some documentation that specifically says otherwise? And if so, how do I make this work?!
My intention was to keep the storage mobile with the lab and not have to put it on my server as the wired network is already substantially loaded down with other stuff. If I have to move it to my server, then that means quite a bit of work re-setting up all the laptops. It'd also chap my hide as the Airport Extreme advertises that it can handle 50.
Help!
-Graham
Message was edited by: gracoat

I did install the disk utility. How do I go about using the disk utility to set up the Hard Drive?
AirPort: How to mount an AirPort Extreme USB hard disk volume in Mac OS X and Windows
Should I install Bonjour for Windows? If so, where can I get it?
Only if you want to access a shared USB printer connected to the AirPort. You can get it here: Bonjour for Windows 1.0.4
Not sure what the drive is formatted in.
The AirPort Extreme (802.11n) supports USB storage devices that have a block size of 512 bytes, and are formatted as Mac OS Extended (HFS-plus), FAT16, or FAT32. It will NOT work with NTFS-formatted volumes.
(ref: AirPort Extreme (802.11n): USB storage device supported formats and protocols

Apple iTunes Home Sharing, and using an external AP with new GigE Wireless "N" Router

I just upgraded to the Verizon FiOS (Actiontec) GigE Wireless "N" Router (from the old megabit wireless A/B/G router) last week. So far, almost everything has been working okay. Before I get to the issue, let me make another statement...
My house is kind of a funny shape, so I have had to add on an additional access point to the router to help more fully cover the house. So, I have an additonal AP (Amped Wireless part # AP20000G) plugged into one of the ports on the Verizon Fios GigE Router.
However, I ran into a bit of a stumbling block when trying to do Home Sharing to the devices on my network. Initially, I found that Home Sharing wouldn't work at all. I found that disabling the IGMP Proxy seemed to fix this, so long as I was connecting only to the wireless AP that's in the Verizon FiOS router. However--when I connect to my additional AP, home sharing will not work.
Long story short, it seems like the Verizon router is blocking traffic between my iTunes server and any device that's connected to the external access point. What could be causing this, and how can it be fixed?

'But can I both create the wireless network and remain connected to the city-wide wireless?'
Yes I think so. To answer in more detail, can I draw parallels with my set-up?
I've an Extreme wired to a router (a house-wide, not city-wide network).
From this there are three computers that can all connect to the internet (one wired, two wireless)
As well as this I have four Expresses connected to various sound systems around the house.
The comparison I'm trying to make lies with my daughters PC laptop which, whilst always connected to the internet (via the Extreme) can be taken around the house and via Airtunes, play her iTunes library through any of the expresses.
Steve
iMac (ALS) G5 (2GB ram) Mac OS X (10.4.7) BondiG3 (10.3.9) extreme/express and an ipod

Verizon's new FiOS GigE Wireless N Router and High Speed Internet

So I got a deal in the mail to get an upgrade to [50/25] Mbps Internet (I currently have [15/5]...when I was reviewing it on line this message came up...
Verizon will provide up to [50/25] Mbps Internet with a wired connection. If you use your Internet primarily for wireless or WiFi connections, you have the option to upgrade to Verizon's new FiOS GigE Wireless N Router which will maximize your speed delivered through your wireless connection.
Upon completion of your order, you'll be provided with information for purchasing a router at Verizon's online equipment and accessories store.
I am VERY interested in getting super fast internet...my current internet is really good but it wouldnt hurt to bump it up. I have several devices using internet in the home...most of them wireless (including my PS3). I currently use a Verizon Actiontec router.
So here is my question...do I really need to get the above router to take advantage of that [50/25]? Also one other thing...My house is fairly large and I would really like to have two routers...is it possible to use two routers or a setup to have one upstairs and another downstairs?
Thanks in advance for the answers!
-Jest

There are a lot of variables that affect wireless range.
Walls, interference, other networks in the area, etc.
You don't indicate which older Actiontec you have.
Wireless capabilities also vary by Actiontec hardware revision (A,C,D,E,F,G,I).
In general, wireless range for 802.11n is somewhat less than 802.11g, even though the bandwidth is higher.
This is especially true on the 5Ghz band (which the latest Actiontec doesn;t support).
If you only need another 10 feet, you could try moving the router, or replacing the antenna with a high gain antenna.
http://www.meritline.com/high-gain-802n-2-4ghz-swivel-antenna-routers-network-card-adapters---p-4440...

Problem with IMAQdx and Pleora GigE Devices

We have an iPort Analog Pro Pleora device to convert analog camera output to GigE. Our old camera works properly using the manufacturer's application "GEV". Images are displayed without problem and any packet size works fine.
Using NI-MAX the device is found and configured properly, but trying to get images the following message appear:
"the system did not receive a test packet from the camera. The packet size may be too large for the network config or a firewall may be enabled".
Firewall has been disabled and several packet sizes tested, but no images received. Manufacturer said that: "I know that NI IMAQ-dx does not have multi channel support, you can stream from the first channel but what happens is when NI caches the XML file upon connection, it reads the SourceSelector register and defaults it to Source2. You have to manually change the XML file to read Source1 for the SourceSelector or you can change this in the IMAQ software itself." This is true, but modifiyng the icd file for the first channel, nothing happens.
Also, some old messages about a similar problem with the Pleora's devices recommended to set the package' size to 1400. Again, nothing happens.
Any piece of advice about this problem (I know many people is working with pleora's device under NI-labview)?
Thanks in advance
Enrique Joven (Spain)

For interested people:
1.- Select 1400 bytes packages
2.- Always select "Source 1"
and the most important thing:
3.- Select "Firewall Traversal - enabled"
And works.

I am having consistant problems w/ my mb pro freezing for 20-60 seconds while working in different programs and apps. i've upgraded my RAM to 8gigs and deleted over 60 gig of pics and videos to try to help, but nothing seems to work.

I've now been having this problem for months. It just freezes up and either shows me the dumb color wheel or doesn't show me anything sometimes and i just cant do anything for about 20-60 seconds. i can't exposae or anything. Also while working on a power point presentation it froze 4 different times for good and i had to do a hard restart just to get it working again. i lost my work and had to keep starting over. it was so annoying. it seems most of the time it does it, it is while i'm in Excel, Outlook, or Powerpoint. so perhaps it has something to do with my microsoft office. but i have the newest version and all the updates and everything. and i believe its happened when doing other tasks too. So i just can't figure it out.
A few Mac friends suggested i free up some space on my hard drive and upgrade my RAM. So i did. i put all my videos and photos on an external harddrive and deleted them all on my computer. i also upgraded to 8 gigs of RAM.
And honestly i can't even tell a difference after doing both of these.
HELP! PLEASE HELP! I'M ABOUT TO GO CRAZY. And having all the non Mac believers telling me it cause i have a Mac even drives me more nuts..
Jason

Any of this help?
it froze a few times over the last hour and half while browsing the internet.
and also while working in excel it all of the sudden shut down excel and said. "Excel has encountered and problem and needs to shut down, you may lose the work you were on." or something like that. THIS HAPPENS ALL THE TIME TOO. Excel, outlook and powerpoint frequently just shut down on me out of now where. I've bolded and underlined when this happened.
1/8/12 11:50:56 AM
Software Update[4573]
PackageKit: *** Missing bundle identifier: /Library/Receipts/PPD_Installer_RI3292E3L.pkg
1/8/12 11:51:22 AM
com.apple.launchd[1]
(com.apple.suhelperd[4575]) Exited with exit code: 2
1/8/12 12:13:51 PM
com.apple.launchd[1]
(com.apple.netauth.sysagent[4608]) Exited with exit code: 255
1/8/12 12:17:37 PM
com.apple.launchd[1]
(com.apple.netauth.sysagent[4616]) Exited with exit code: 255
1/8/12 12:20:47 PM
com.apple.backupd[4644]
QUICKCHECK ONLY; FILESYSTEM CLEAN
1/8/12 12:21:39 PM
com.apple.launchd[1]
(com.apple.netauth.sysagent[4645]) Exited with exit code: 255
1/8/12 12:26:25 PM
[0x0-0x26026].org.mozilla.firefox[263]
colorbits: 24 alpha: 8 depth: 24 stencil: 0
1/8/12 12:26:25 PM
[0x0-0x26026].org.mozilla.firefox[263]
*** depth: 24 (req: 24)
1/8/12 12:27:54 PM
[0x0-0x26026].org.mozilla.firefox[263]
colorbits: 24 alpha: 8 depth: 24 stencil: 0
1/8/12 12:27:54 PM
[0x0-0x26026].org.mozilla.firefox[263]
*** depth: 24 (req: 24)
1/8/12 1:00:43 PM
com.apple.launchd.peruser.501[112]
([0x0-0x1b01b].com.microsoft.Excel[210]) Exited: Killed
1/8/12 1:03:51 PM
[0x0-0x199199].com.microsoft.Excel[4763]
Sun Jan 8 13:03:51 Jason-Streiffs-MacBook-Pro.local Microsoft Excel[4763] <Error>: CGBitmapContextCreate: invalid data bytes/row: should be at least 5760 for 8 integer bits/component, 3 components, kCGImageAlphaNoneSkipFirst.
1/8/12 1:03:52 PM
[0x0-0x199199].com.microsoft.Excel[4763]
Sun Jan 8 13:03:52 Jason-Streiffs-MacBook-Pro.local Microsoft Excel[4763] <Error>: CGBitmapContextCreate: invalid data bytes/row: should be at least 5760 for 8 integer bits/component, 3 components, kCGImageAlphaNoneSkipFirst.

HT1338 I just installed OSX snow leapord and just want to be able to use icloud. I up--graded my old macbook to 2 gigs and still can't get it to download icloud . would go to osx mountain lion but can't do that either. What do I have to do???

I want to use icloud to sync w/my new apple tv. bought osx snow leopard and installed it plus upgraded to 2 gigs memory for my
old (2007) macbook. still won't work. I need to get to at least osx 10.7.4 or to osx mountain lion. Tried everything and can't get there.
I'm not a computer whiz...quite a novice. so, if you can help; please speak in layman language....ha   Thanks

iCloud requires 10.7.2 or later.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

Need help. I am running a 27 in imac with 16 gigs of ram. Photoshop runs really fast, except when opening files. It takes 5-10 minutes to open even a small file of 1 meg. I cleaned and validated all the fonts and removed all questionable fonts. Reset pref

Need help. I am running a 27 in imac with 16 gigs of ram. Photoshop runs really fast, except when opening files. It takes 5-10 minutes to open even a small file of 1 meg. I cleaned and validated all the fonts and removed all questionable fonts. Reset preferences and still have problem. Slow to open and in force quit "Photoshop not responding" At this point should I uninstall and start over.

What are the performance Preferences?

80 gig and 60 gig!

Similar Messages

Maybe you are looking for