800-ADSL over ISDN ISDN-features
Hello,
has anyone experiences with the BRI at the 800 ADSL over ISDN Routers (like 836).
I wonder what's the difference between the feature sets.
OOB-Management and Dial-Backup over ISDN is described in the Datasheet as feature of the 'IP/FW/IPSec-3DES-PLUS-Dial-Backup' IOS only, but in my tests it seems that the BRI is a fully functionaly routed Interface in all feature sets.
I think there is no more need to buy another ISDN-Router like 801 or 803 when I have full ISDN connectivity at the ADSLoISDN-Routers with standard feature set. And with the 'DMZ-Ethernet' feature I have even a secondary routed Ethernet-port and there is no more need to buy a 831.
I the 836 Datasheet (http://www.cisco.com/en/US/partner/products/hw/routers/ps380/products_data_sheet09186a008014ee18.html) you can see that the default featureset already has firewall and VPN features ('IP/FW/IPSec 3DES default feature set') even if it is called CISCO836-K9-64 (Cisco 836 ADSL over ISDN Router-64MB) in the Cisco-pricelist.
I hope that's the same with the 876 which is called CISCO876-K9 (ADSLoISDN Security Router) in the pricelist.
Similar Messages
-
Cisco 876 ADSL over ISDN Router
I am facing some problem in using ISDN bri S/T interface for connectivity to HO PRI router.I am not using the ATM interface of this router.The isdn status always shows that the isdn layer 1 and 2 is deactivated. IF i connect the same bri cable to other isdn router it works fine.
Is their any special configuration or command required in 876 router for the isdn dialing?
I found on cisco that the 876 router ISDN bri S/T interface is for the out-of-band mangement and dial backup.
Can i use this interface for the normal isdn dialing?
need some clarification.
regards,
khalid siddiqFind the attach detail.
SCIENTECH-AVEER#
SCIENTECH-AVEER#sh runn
SCIENTECH-AVEER#sh running-config
Building configuration...
Current configuration : 1505 bytes
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname SCIENTECH-AVEER
boot-start-marker
boot-end-marker
username INET-Rou-ESA password 0 cisco123
no aaa new-model
ip subnet-zero
ip cef
no ftp-server write-enable
isdn switch-type basic-net3
isdn tei-negotiation first-call
interface BRI0
description connected to HQ PRI
no ip address
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-net3
ppp authentication chap
interface ATM0
no ip address
no atm ilmi-keepalive
dsl operating-mode auto
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
shutdown
interface FastEthernet2
no ip address
shutdown
interface FastEthernet3
no ip address
shutdown
interface Vlan1
ip address 192.168.201.25 255.255.255.0
interface Dialer0
ip address negotiated
encapsulation ppp
dialer pool 2
dialer string 404444
dialer-group 1
router rip
network 192.168.201.0
network 192.168.251.0
ip classless
no ip http server
no ip http secure-server
dialer-list 1 protocol ip permit
dialer-list 2 protocol ip permit
control-plane
line con 0
password gbm4ibm
login
no modem enable
transport preferred all
transport output all
line aux 0
transport preferred all
transport output all
line vty 0 4
password gbm4ibm
login
transport preferred all
transport input all
transport output all
scheduler max-task-time 5000
end
SCIENTECH-AVEER# sh ver
Cisco IOS Software, C870 Software (C870-ADVSECURITYK9-M), Version 12.3(8)YI2, RE
LEASE SOFTWARE (fc1)
Synched to technology version 12.3(10.3)T2
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Tue 14-Jun-05 18:58 by ealyon
ROM: System Bootstrap, Version 12.3(8r)YI2, RELEASE SOFTWARE
ROM: Cisco IOS Software, C870 Software (C870-ADVSECURITYK9-M), Version 12.3(8)YI
2, RELEASE SOFTWARE (fc1)
SCIENTECH-AVEER uptime is 22 hours, 13 minutes
System returned to ROM by reload
System image file is "flash:c870-advsecurityk9-mz.123-8.YI2.bin"
Last reload reason: Reload command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco 876 (MPC8272) processor (revision 0x100) with 118784K/12288K bytes of memo
ry.
Processor board ID FCZ100223M7
MPC8272 CPU Rev: Part Number 0xC, Mask Number 0x10
4 FastEthernet interfaces
1 ISDN Basic Rate interface
1 ATM interface
128K bytes of non-volatile configuration memory.
24576K bytes of processor board System flash (Intel Strataflash)
Configuration register is 0x2102 -
PPP Callback over ISDN failure - user not authorised
Hi,I'm still a rookie with Cisco and in need of help: Have a MS XP PC dialing into 803 over ISDN, successfully connecting if 803 config'd for Callback optional (no callback secure) but failing for callback secure with log message "Callback not authorized for this user Support". and despite reading up on PPP callback configs from the RemoteAccess Selfstudy guide, IOS DialTechnologiesConfig, and various examples I am unable to find what I'm doing wrong in the configs. Attached is file with router SW version, debugs used for logging, the active config, and the log. I have edited router name, usernames, and telnr for security reasons.
Regards
ZetHi,
thanks for your advice. I've tried it with the same failure results as before.
Also tried setting up 2 1720s with Image ver 2.3(9)Rel(fc2) according to cisco sample doc "Config PPP Callback over ISDN" (isdn-ppp-callback.pdf) even tried PAP instead of CHAP - same result: authenticates user ok but fails callback. If the client is router server reports "no callback config for user ..." and if client is PC " callback not authorized for this user ..."
Have got the 1720 logs for server & client routers if you require.
Where else would it look to, to identify the client as callback, the global username declaration makes sense, according to Command Guide it looks like "dialer callback-server username" references the interface command "dialer map ip .... We've now tried both, neither working. I am truly at a loss here, any ideas?
Regards
Zet -
Hi,
I have an issue with voice over isdn over ip Can anyone help me and explain me about the facts of the above issue and the working process and product details and implementation with a typical network diagramYou need help on a specific issue, or you have no clue on the task you have been assigned to do and you are looking for someone to do it for you ???????????????????????????
-
Configure Frame-Relay over ISDN
Hi can we configure frame-relay over ISDN can anyone provide me with the details
Hi
Check this link
http://www.cisco.com/warp/public/125/19.pdf
Hope this helps you,
Thanks
Raj -
Switch 886 VA router modem to Annex B (German T-Com VDSL over ISDN)
Hi,
I'm using a 886 VA router to connect to T-COM Germany VDSL. Unfortunately, german T-COM are using VDSL over ISDN, so I have to switch the modem to ANNEX B. Initial setup of the modem is ANNEX A. I can hardly find any documentation for it. Did anybody do that before?
Cheers,
WernerYou have the right model and should be able to use Annex B using IOS indicated in the following document:
http://www.cisco.com/en/US/prod/collateral/routers/ps380/qa_c67-612339.html -
Lenovo G550 and Sagem Fast 800 ADSL modem - limits DL speed to approx. 500kbit/s
Hi,
I bought Lenovo G550 on Tuesday and since then I've got a strange issue with my Internet connection. Until Tuesday I was using Sagem Fast 800 ADSL modem from my ISP on Toshiba Satellite A100-712 notebook since June 2008 with 1Mbit connection and everything was fine - DL speed was 128KB/s (1Mbit/s) as it should, but now on Lenovo the max DL speed I get is ~500kbit/s (60KB/s) and I can't overcome it..
I've done the following so far:
* I have tried on preinstalled Windows Vista - max DL speed I get is ~500kbit/s
* I have installed Windows XP Professional SP3, Sagem drivers installed properly, no unknown devices in device manager - max DL speed I get is ~500kbit/s
* I have installed Windows 7 Professional, Sagem drivers installed properly, no unknown devices in device manager - max DL speed I get is ~500kbit/s
* I've checked download speed on "real" downloads and DSL testing portals (dsl.cz, speedtest.pl, speedtest2.com) - max DL speed I get is ~500kbit/s
* I have turned off energy saving on USB and ADSL modems on all 3 Windows OS mentioned, restarted the PC - max DL speed I get is ~500kbit/s
* I have plugged and checked the download speed on all 3 USB ports - max DL speed I get is ~500kbit/s
* I have installed cFosSpeed - max DL speed I get is ~500kbit/s
* I've called the ISP, they checked the connection (1Mbit shown up in their tests), checked if there are any problems with their infrastructure (nothing was wrong), finally reset my port and asked to check my DL speed - max DL speed I get is ~500kbit/s
* the ISP has sent an onsite technician, guy brought his own HP notebook and Sagem Fast 800 modem (just like mine) to check my connection - on his HP laptop both mine and his modems got 1Mbit/s DL speed, and when I tried both modems with my Lenovo G550, guess what -max DL speed I got was ~500kbit/s on both of them (so it's obvious that it's not modem, line or ISP's fault)
It seems that this issue is notebook related. I'm running out of ideas, the last thing I'm going to try today is to run Ubuntu LiveCD and check my DL speed then, but to be honest I don't expect it to change anything.
Could anyone possibly help me? It really sucks to pay for 1Mbit and have real download speed less than half of it.
Regards,
PW -
"Over 100 New Features List" ??
Ever since the release of IOS4, I have heard the term "over 100 new features" thrown around, yet I can not find an official list of these features. Does anybody know where an official list can be found with each feature number listed out? I feel like it is just a hype term they have used, but it isn't documented anywhere. Any help would be greatly appreciated!
^ that one is very good.
http://webtrickz.com/new-features-in-ios-4-iphone-os-4-software/
Multitasking support for third-party apps*
– Multitasking user interface to quickly move between
apps
– Support for audio apps to play in the background
– VoIP apps can receive and maintain calls in the
background or when device is asleep
– Apps can monitor location and take action while
running in the background
– Alerts and messages can be pushed to apps using
push and local notifications
– Apps can complete tasks in the background
Folders to better organize and access apps
Home screen Wallpaper*
Mail improvements
– Unified inbox to view emails from all accounts in one
place
– Fast inbox switching to quickly switch between
different email accounts
– Threaded messages to view multiple emails from the
same conversation
– Attachments can be opened with compatible third-
party apps
– Search results can now be filed or deleted
– Option to select size of photo attachments
– Messages in the Outbox can be edited or deleted
Support for iBooks and iBookstore (available from the App Store)
Photo and Camera improvements
– 5x digital zoom when taking a photo**
– Tap to focus during video recording**
– Ability to sync Faces from iPhoto
– Geo-tagged photos appear on a map in Photos
Ability to create and edit playlists on device
Calendar invitations can be sent and accepted wirelessly with supported CalDAV servers
Support for MobileMe calendar sharing
Suggestions and recent searches appear during a web search
Searchable SMS/MMS messages**
Spotlight search can be continued on web and Wikipedia
Enhanced location privacy
– New Location Services icon in the status bar
– Indication of which apps have requested your location
in the last 24 hours
– Location Services can be toggled on or off for
individual apps
Automatic spellcheck
Support for Bluetooth keyboards*
iPod out to navigate music, podcasts and audiobooks through an iPod interface with compatible cars
Support for iTunes gifting of apps
Wireless notes syncing with IMAP-based mail accounts
Persistent WiFi connection to receive push notifications*
New setting for turning on/off cellular data only**
Option to display the character count while composing new SMS/MMS**
Visual Voicemail messages can be kept locally even if they have been deleted from the server**
Control to lock portrait orientation*
Audio playback controls for iPod and third-party audio apps*
New languages, dictionaries and keyboards
Accessibility enhancements*
Bluetooth improvements
Better data protection using the device passcode as an encryption key* (Requires full restore.)
Support for third-party Mobile Device Management solutions
Enables wireless distribution of enterprise applications
Exchange Server 2010 compatibility
Support for multiple Exchange ActiveSync accounts
Support for Juniper Junos Pulse and Cisco AnyConnect SSL VPN apps (available from the App Store)
More than 1,500 new developer APIs
Bug fixes -
Help with CISCO-887VA adsl over pots and PPPoE with dynamic IP
Hi
I've got problem trying to connect the CISCO-887VDSL/ADSL OVER POTS ROUTER to internet. Only got the LAN part working.
I'm trying to setup PPPoE with dynamic IP
Followed CISCO's documentations but the commands used were not recognized by the router. Any simple working config for me to follow will be enough.
I'll appreciate any help. Thanks a lot!
here's my config.
! Last configuration change at 08:31:51 UTC Sat Feb 11 2012
version 15.1
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname router
boot-start-marker
boot-end-marker
no aaa new-model
memory-size iomem 10
crypto pki token default removal timeout 0
ip source-route
ip dhcp excluded-address 10.0.0.1 10.0.0.149
ip dhcp excluded-address 10.0.0.199 10.0.0.254
ip dhcp pool sdm-pool
import all
network 10.0.0.0 255.255.255.0
default-router 10.0.0.1
dns-server x.x.x.x x.x.x.x.x
lease 0 2
ip cef
no ipv6 cef
license udi pid CISCO887VA-K9 sn FGLxxxxxxx
controller VDSL 0
ip ftp username cisco
ip ftp password cisco
interface Ethernet0
pppoe enable group global
pppoe-client dial-pool-number 1
no ip address
shutdown
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 0/35
pppoe-client dial-pool-number 1
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface Vlan1
ip address 10.0.0.1 255.255.255.0
ip nat inside
ip directed-broadcast
ip virtual-reassembly in
ip tcp adjust-mss 1452
interface Dialer1
mtu 1492
ip address negotiated
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname xxxx
ppp chap password 0 xxxx
ppp pap sent-username xxxx password 0 xxxx
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list 1 interface Dialer1 overload
ip route 0.0.0.0 0.0.0.0 Dialer1
ip access-list standard 1
permit 10.0.0.0 0.0.0.255
no cdp run
line con 0
line aux 0
line vty 0 4
login
transport input all
endTry to check with your ISP the modem string to use for VDSL
and some ISP support direct dhcp on Ethernet0 without PPPoE.
An equivalent config is working for me in Switzerland with Swisscom.
N.B. "modem" under VDSL controller is enable using service internal !
service internal
controller VDSL 0
operating mode vdsl2
modem co5
ip source-route
ip cef
ip dhcp excluded-address 10.0.0.1 10.0.0.149
ip dhcp excluded-address 10.0.0.199 10.0.0.254
ip dhcp pool sdm-pool
import all
network 10.0.0.0 255.255.255.0
default-router 10.0.0.1
dns-server 8.8.8.8
lease 0 2
interface Ethernet0
ip address dhcp
ip nat outside
interface Vlan1
ip address 10.0.0.1 255.255.255.0
ip nat inside
ip tcp adjust-mss 1452
ip nat inside source list 23 interface Ethernet0 overload
access-list 23 permit 10.0.0.0 0.0.0.255
end -
Hi all,
I have a Ascend DSLTNT in my Lab and they only support ADSL over frame relay and I dont have compatible modems. Is there any cisco ADSL WIC card which I can use in 2600 router for adsl or sdsl over frame relay. I will be grateful for your help.
Thanks in advance.
Regards
MeerThere is an ADSL WIC, please check below for details.
http://www.cisco.com/en/US/tech/tk175/tk15/technologies_q_and_a_item09186a0080093bff.shtml#a
Hope this helps. -
When I got the prompt to update my iPod Touch 4th generation, the update claimed to have over 200 new features including Siri. Is there going to be another update that would make this a true statement?
No Siri on 4G Footnote 2 of
Apple - iOS 6 - iPhone, iPad, and iPod touch get 200+ new features.
says:
Siri is available on iPhone 4S, iPhone 5, iPad (3rd generation), and iPod touch (5th generation) and requires Internet access. -
BT Infinity over ISDN lines?
Hi
I'm considering BT Infinity, but have a query regarding it's positioning.
The existing cable comes up from the ground by the front door, through the wall, then under the concrete hallway floor, and reappears on an internal wall - unfortunately in a wireless 'dead spot'.
I would prefer to be able to connect my desktop PC via Ethernet upstairs where I work, which obviously means moving the master socket.
However, at the point where the line enters (by the front door), there is a separate cable running around the outside of the house, which, many years ago, used to host an ISDN line. This is where I'd like the new master socket to be located.
My first question - would the ISDN cable be capable of hosting Infinity, or is the ISDN a different type of cable?
Secondly - if the cable is OK, would it be a trivial (free) job to switch the wiring over to the ex-ISDN cable, and use the old upstairs socket as the new master?
Many thanks
MarkHi mark,
AFAIK there's no difference between the wires that ISDN lines use and those that normal telephony/xDSL services use. The only thing with ISDN is that there is equipment installed on either end to ensure the signal remains digital (instead of digital/analogue/digital for xDSL). As long as this equipment has been removed (and there is no ISDN "Tag" on the line) you should be fine. If not, or if there is no active telephone service on the line (i.e. if you can't get a dial tone if you plug in a normal telephone) you'll need to address this first.
For your second query, it completely depends on what way you have your internal wiring configured. Some engineers who install Infinity are happy to move around pre-existing internal wiring however they are not obliged to do so, so if your internal wiring setup is quite complex they may refuse. You may be better to have this addressed before getting Infinity installed to make 100% sure everything is to your liking.
Hope this helps
Dean
BTCare Community Mod
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
VWIC-MFT-E1in 2811: Support for data calls over ISDN
Hi,
is it possible to use the MFT-E1 cards for ISDN data calls by help of Dialer Profiles in Cisco2811 ?
thank you
MathiasHi. There is a new feature callled "Integrating Data and Voice Services for ISDN PRI Interfaces on Multiservice Access Routers" in IOS verze 12.4(4)XC. For more info see http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124newft/124limit/124x/124xc4/intserv.htm . One our customer tasted ISDN data calls and IT WORKS :o). Regards Miroslav
Please rate if it will be helpfull. -
Install a Router with IP Masquerading over ISDN
hi aLL
I want to use my Solaris 8 mashine as a router, to connect all my other computer to the internet and share one isdn line. for that i have to install my isdn card. it�s a very popular AVM Fritz! Card PCI. but i could not find a driver for it. i went to sun HCL. i only found 2 compatible isdn card in the list, a Digi International Digi Datafire-Ua and Digi Datafire S/T[a]. I tryed to get more infomation of this two cards but i found nothing. only a card with another name : DataFire PRIme. This one has Solaris Drivers but is not in the HCL list of Solaris 8
Does anyone knows about an isdn Card wich works unter Solaris, or know how to make a Router under Solaris ?
I know there are ISDN Modem connected with a serial cable to com 1 or 2. may they work ?
in half a year i want to use DSL. Does anyone has experience with DSL on Solaris ??? I know i need PPPoE.
Thanx SiegfriedThe other threads seem to be showing ICMP deprioritzation, not packet loss
pinging only one host makes it pretty tough to see if there is actual loss or just deprioritization which more common
can you provide a traceroute that shows the packet loss as well to confirm? -
Dlsw over ISDN, flapping
my topology like this
E0---R1----ISDN-----R2----E0
R1
E0, 10.1.1.1/24
BRI0 192.168.0.1/24
R2
E0 10.2.2.2/24
BRI0 192.168.0.2/24
use static route on R1 and R2
for dlsw configuration
R1
dlsw local peer-id 10.1.1.1
dlsw remote 0 tcp 10.2.2.2 keepalive 0 timeout 90 dynamic
dlsw bri 1
bridge 1 pro ieee
bridge-group 1(E0)
R2
dlsw remote 0 tcp 10.1.1.1 keepalive 0 timeout 90 dynamic
and the Dlsw peer status is CONNECT now. and ISDN is flapping.
Any advice?
Thanksbecause the topology is so simply, I use static route, no dynamic routing, so no other traffice, only dlsw.
I guess,
for the ISDN, the default idle-timeout is 120s and the dlsw keepalive is 30s, and in 90s by default if no dlsw keepalive, the peer will disconnect.
so, after everything is done, dlsw peer status is "connect"(assume it takes 40s). 120s later, the ISDN is down, (40s+30s+some seconds) later, R1 send the dlsw keepalive to R2, and ISDN is up, in this 120s, isdn is up and dlsw is connected. after ISDN down again, dlsw bring it up again. again and again.
so if we set keepalive=0, it seems a good idea, because dlsw doesn't connect/disconnect by the keepalive. but in fact, it is still flapping.
I don't know how "dialer-watch" works, maybe I can get something from "dialer-watch". (no watch needed in this topology)
for the "show dialer", the dialer reason is
(source 10.1.1.1, dst 10.2.2.2), so that is dlsw
Thanks anyway
Maybe you are looking for
-
Can't access some sites over WIFI (app store and more)
HI, Not sure really where I can post this, but hoping someone will have a lead as it's very frustrating. I have a belkin N router, and for some reason over wifi some sites do not work. I cannot access the Appstore on 2 iphones, I get error message th
-
ITunes library on Time Capsule accessed by multiple accounts - Not working!
I moved my iTunes library from an external hard drive to my new Time Capsule (it is in the Data folder). I can access it fine from my user account, but my husband who has an account on the same MacBook Pro cannot. When he tries to access the Data fol
-
I am just recently having problems with my EOS T3 camera. The pictures will start to wash out. The three pictures below display the problem with them middle one changing half way through. If you know what I am doing wrong let me know. I generally
-
Can Postal Soft Business Edition remove special characters from a data file? I have run a few tests and in some instances special characters were not removed.
-
ODBC ORACLE connection issue when trying to create a datastore. SAP Ds 3.2
I am at a client and I am trying to create an Oracle data store. I have an Oracle client installed on my laptop and an ORACLE driver. I can connect and query Oralce tables using Oralce tools on my laptop. When I go to SAP DS to create a datastore I