800 MHz G4 imac- what is the most RAM

I can install? I am at 512. And I would buy a new intel imac, but too many software issues right now. So I want to stall. How much and how do I do it?
Thanks.

Virgil,The most is 1Gb of PC133 SDRAM in an iMac 800 (There are rumours of 2Gb but I've yet toi hear any confirmation of that).
You need:
PC133 SDRAM 168pin DIMM in the 'factory' slot
PC133 SDRAM 144pin SODIMM in the 'user' slot.
To check you current configuration go (Apple Menu > About this Mac > More Info (This opens Apple System Profiler). You will see a memory section look for:
J20/DIMM/256Mb PC133 322
J22/SODIMM/256Mb PC133 222
or something similar (I'm going from memory here - excuse the pun).
Go to a reputable dealer like Crucial who will guarantee the RAM you buy will work in your iMac. Ramseeker shows the range of prices you should expect.
Here are the instructions for getting to the 'factory' slot (the 'user' slot installation should be self explainatory if you're undertaking this task!!! ).
You may also wish to consider a HD and Optical drive update at the same time to save doing it later.
The key point is to replace the Thermal Paste when you close the machine up to prevent it overheating.
You do realise that most software will work okay on Intel Macs using 'Rosetta' emulation (installed as standard on ICD Macs). However, I would agree and let others beta test these machines. I like to run the nearly final version of a product line - tried and tested!!!
regards
mrtotes

Similar Messages

What is the most RAM I can put in mac book pro 15 inch 2.16(2006)?

What is the most RAM I can put in mac book pro 15 inch 2.16(2006)?

Depends. There were two version of the MBP that shipped in 2006 with different max RAM. The quickest way to see which is yours is to use System Profiler to get your Mac's "Model Identifier."
Do "About this Mac" from the Apple menu and, in the resulting window, click "More Info..." That launches System Profler for you.
The answer is in the first screen of Profiler that comes up--"Hardware Overview." Note the second line in this example:
If the Model Identifier says "MacBookPro1,X" you are limited to 2G RAM. Period.
If the Model Identifier says "MacBookPro2,X" you can install two, 2G modules for an installed total of 4G RAM, but the logic board can only access 3.2G of it. That becomes your "max RAM.
Hope this helps,
AJ

What is the most effective way to get my imac 2 ghz intel core duo 2 10.4.11 to be able to run 10.5 and sync with my iphone 4s?

What is the most effective way to get my imac 2 ghz intel core duo 2 10.4.11 to be able to run 10.5 and sync with my iphone 4s?

As your Mac should run Snow Leopard provided it has at least 1GB memory, that would be a good deal easier and very much cheaper than trying to find a 10.5 install disc.
Snow Leopard costs $30 approx from the online Apple store (£26 if you're in UK)
You'll need to update Tiger to 10.4.11 with the combo installer first (unless you're just erasing the disc and starting fresh) You can then update SL from 10.6.3 to 10.6.8 with its combo installer.
For comparison, 10.5 Leopard is currently running about $130 from Apple (if still available) and more on Amazon etc.
This info for Leopard courtesy of TexasMacMan;
Mac OS X 10.5 Leopard installation system requirements
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
MB427Z/A Leopard 10.5.1 install DVD
MB576Z/A Leopard 10.5.4 install DVD
MB021Z/A Leopard 10.5.6 install DVD (single user)
MB022Z/A Leopard 10.5.6 install DVD (5-user family pack)
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update

What is the most efficient (in terms of cost) way to transfer 35 mm slides to my iMac hard drive?

What is the most cost efficient way to transfer 35mm slide images to my iMac hard drive?

This gives you the basics
http://www.tech-faq.com/how-to-copy-slides-to-disk.htm
The first option, the professional one, isn't the cheapest - but the results should be good.
The second option is very appealing. Some printers come with brackets that can be used to scan film or slides.
The third option is a slide scanner. I haven't used this option, but there's a significant startup cost of under $100.
In short, a scanner is the cheapest and most efficient option.

What's the most up-to-date OS my iMac can run?

What's the most up-to-date OS my iMac can run?
I have an early 2008 iMac 8.1 Intel Core Duo 2.8GHZ 320GB Hard Drive.
I'm currently running 10.5.8 — could you advise the most advanced OS it can handle?
Thanks

http://www.everymac.com/systems/apple/imac/specs/imac-core-2-duo-2.8-24-inch-alu minum-early-2008-penryn-specs.html
You should be able to run the latest Mountain Lion - make sure to up your RAM (ML is a bit of a memory hog).

Laptop editing with Premiere Pro CS4: what are the most important specs

Laptop Editing: What are the MOST important specs?
Hello everybody, I have been a long time lurker, but I decided to join in and share my voice.
I've been editing, for a while now, various projects of various lenghts shot on my HV20, on an IMac using Adobe Premiere Pro. Actually, I bought the CS4 Extended Production Suite last year thinking that it made sense to be able to edit, do the coloring and effects+ sound all within the same suite.
AND, it came with OnLocation, wich is, I think, a fantastic tool. I really want to be able to record and monitor my future shoots using OnLocation. I've seen how useful monitors and scopes are on set, and the idea of being able to shoot in HD and actually checking the focus on something larger than a few inches is very appealling!
So a laptop is in my future. Now, what are the most important specs?
I could buy 1) a barely used Macbook pro early 08- 17" HD led display ,4g Ram ddr2 ,nvidia 8600M GT 512 VRAM ,800Mhz BUS, 200G 7200HD
and have enough money left to buy an Apple Display 30" refurb
OR 2) a new Macbook pro 17, 4 g Ram ddr3, 512 VRAm, 4g Ram ddr3, double procsessors 9400M+9600M GT 512 VRAM, 1066 BUS, 500G 7200HD
and wait for a second display!
Plus, of course, a portable External Scratch Drive on the Express Card. Now, if that fast drive is handling the footage, could'nt I settle for a 5400HD in the laptop,, they seem much less prone to problems-clicking noise, heat-than the 7200, especially in the new unibody model. Is 800 versus 1066 BUS a terrible trade-off? In terms of secondary displays , I've heard less than lukewarm things about the new Apple 24 LED (glossy is no-no for me).
My intentions are to make documentaries and short fictions as well. I make a living as an actor so I don't need to be performing as a director/editor business wise!
I do want to explore that side of the craft, in a professional and enjoyable way though. I know that, in addition to the laptop, I will get a MacPro in a few years.
Thanks a lot for the inputs!

Successful video editing (as compared to tear your hair out video editing) requires at least two hard drives... one for all software and one for all data... some people use 3 drives, with data on one and scratch files on the 3rd drive
I'm not sure about software, but everything I've ever read in this forum says 5400 is NOT fast enough for the data drive
If you want to edit video... you have to buy the hardware that works

Laptop Video Editing: What are the MOST important specs

I've been editing, for a while now, various projects of various lenghts shot on my HV20, on an IMac using Adobe Premiere Pro. Actually, I bought the CS4 Extended Production Suite. It came with OnLocation, which is, I think, a fantastic tool. I really want to be able to record and monitor my future shoots using OnLocation. I've seen how useful monitors and scopes are on set, and the idea of being able to shoot in HD and actually checking the focus on something larger than a few inches is very appealling!
So a laptop is in my future. Now, what are the most important specs?
I could buy 1) a barely used Macbook pro early 08- 17" HD led display ,4g Ram ddr2 ,nvidia 8600M GT 512 VRAM ,800Mhz BUS, 200G 7200HD
and have enough money left to buy an Apple Display 30" refurb
OR 2) a new Macbook pro 17, 4 g Ram ddr3, 512 VRAm, 4g Ram ddr3, double procsessors 9400M+9600M GT 512 VRAM, 1066 BUS, 500G 7200HD
and wait for a second display!
Plus, of course, a portable External Scratch Drive on the Express Card. Now, if that fast drive is handling the footage, could'nt I settle for a 5400HD in the laptop,, they seem much less prone to problems-clicking noise, heat-than the 7200, especially in the new unibody model. Is 800 versus 1066 BUS a terrible trade-off? In terms of secondary displays , I've heard less than lukewarm things about the new Apple 24 LED (glossy is no-no for me).
My intentions are to make documentaries and short fictions as well. I make a living as an actor so I don't need to be performing as a director/editor business wise!
I do want to explore that side of the craft, in a professional and enjoyable way though. I know that, in addition to the laptop, I will get a MacPro in a few years.
Thanks a lot for the inputs!

CPU, RAM, bus speed, system HD, external HD, graphics - basically in that order
You should think in terms of purchasing for maximum future use. In that regard the new 17" MacBookPro is the way to go. The specs are significantly better than the early '08 MacBook and you will be much happier in the long run with performance, software support and longevity.
If you really need a large display, consider a 24" Dell, HP, NEC, etc. in the $200-$300 price range to stay within your total budget. You will be pleasantly surprised how good they are.
You could start out with the 5400rpm system HD - you can replace it anytime with a 7200rpm drive if necessary for hardly any more $ than it would cost in the first place; and replacing it does NOT void your warranty. But you WILL want/need a good external FW800 or eSATA drive (for eSATA you will need an eSATA expressCard/34 however) no matter what.
One other thought, if your primary use will be with an external display, and you don't actually need eSATA capability (FW800 will do you just fine at this point), then the 15" 2.66GHz or 2.8GHz MacBookPro models will be just fine at a significantly lower cost than the 17" model.

Moving content from iMovie to iMovie - what's the most efficient way?

If I edit and create movies in iMovie08 on one iMac and I want to transfer the content to iMovie08 another iMac 200 miles away , what's the most efficient way? I prefer not to burn DVDs, because I want to do further work on the movies on the second iMac's iMovie (so I can share them with iTunes and sync them with Apple TV).

>PDPageAddCosContents(destPage, PDPageGetCosContents(srcPage));
Does this method (PDPageGetCosContent) exist? It would be easy enough
to create, but I don't see it in the document.
More seriously, I have a vague memory that it is a Really Bad Thing to
share the same Contents objects between multiple pages. Maybe
something to do with page deletion, can't remember.
>PDPageAddCosResource(destPage, PDPageGetCosResources(srcPage));
These two methods are not symmetric, and PDPageAddCosResource doesn't
work that way, sadly...
Aandi Inston

I have a mid year 2007 24 inch iMac and will be purchasing a new 27 inch Retina iMac, what is the easiest way to transfer the data and files from my old machine to the new one?

I have a mid year 2007 24 inch iMac and will be purchasing a new 27 inch Retina iMac, what is the easiest way to transfer the data and files from my old machine to the new one?

Following up on this thread,
I have a new iMac on the way and my current is from 2008, never had a problem but I am sure there are internal issues that I would prefer not to transfer.
I have no issues other then the slowness in certain programs and that is the main reason to buy a new one.
Programs like numbers and pages seem to take a longer time to open after I update to Yosemite.
I only use 272GB of 500 GB, my memory is 4GB and I am upgrading to 8Gb and bought the 4.0 processor.
Question:
Is there a way to manually transfer items or would that be a waste of time in that if there are issues they could be anywhere and would transfer anyway?

The future of java and what is the most necessary skill to learn

hi, friends,
This is a serious question, so please answer seriously.
1. The future of java
Are there any future for java? What I mean are: are there any jobs for java developer in the future? are there any chances for new java company to survive?
2. What is the most needed skill in so many java technology?
There are so many sections in java technology. so what is the most needed one for one to find a job? what is the most promising section for one to build a company.
Thank your very much!

It's a lousy question really.
1) There are very few companies you'd call a 'java company'. There are companies that use java, but they also by and large use C++, DBMS systems, and a whole host of other technologies. If java died, they'd switch to whatever technology killed it. Any decent programmer is flexible enough to learn a new language in a matter of weeks. It's the ability to work with the theory behind the code rather than the knowledge of syntax that's important.
2) It depends entirely on what you're doing. Working with a company where databases are key? Then you need Oracle, or SQL. Working with web technology? Perl, JSP, PHP, stuff like that is what you want. Working in high performance application design? You need C++. Graphics? Take a look at OpenGL or Java3d.
The most promising section to build a company? If there was a straight answer to that 1000 companies would have sprung up already and filled the niche.
Basically, if you want a successful career in programming, don't become a java programmer, become a programmer full stop. If you think you'll be working with java when you retire in 40-odd years you're mistaken. You need to grasp the basic concepts of application and algorithm design, and be quick to learn new technologies and evaluate them against what exists already.
It can take 3 years to go from complete newbie to fluent in a single programming language. It can then take less than 3 days to become fluent in another.

I have a Power Mac G5 running OS 10.5.8. What is the most recent version of iMovie HD thant I can run on this system?

I have a Power Mac G5 running OS 10.5.8. What is the most recent version of iMovie HD that can run on this Mac?

iMovie 05 and 06 are sometimes referred to as iMovie HD. iMovie 08 and newer aren't.
(70198)

What is the maximum RAM for 2.16 GHz 24 in DDR2 iMac Early 2006

What is the maximum RAM that I can install on iMac 24 in 2.16 GHz DDR2 Early 2006 model?

Is this your Mac:
http://www.everymac.com/systems/apple/imac/stats/imac-core-2-duo-2.16-24-inch-sp ecs.html
I had the same model: officially it'll support 3 GB RAM; some people added 4 GB and it ran fine, but it will only address about 3.2 GB. I decided that wasn't worth it and made do with 3 GB.

What is the most current iweb version I can use to maximize my capabilities?

I have G5 a power pc running 10.4.8 because of final cut issues - what is the most current version of iweb I can use to maximize my capabilities? i have it right now and can only host one site in it, etc. (though I build multuiples)
brent

The latest version of iWeb you can run with 10.4.9 is iWeb 2. iWeb 3 requires Leopard, 10.5.8 or later.
OT

I have an ipod classic with 4gb, it is full. What is the most economical way to upgrade to at least 16gb

I have an ipod classic with 4gb, it is full. What is the most economical way to upgrade to at least 16gb?
(I don't want to delete anything)

To recover the photos from an iPod Classic you'll need to use third-party software and the photos gained will be quite low resolution.
See https://discussions.apple.com/docs/DOC-3991 for possibilities.

What is the most cost effective way to have a broken screen repaired?

What is the most cost effective way to have a broken screen repaired?

One thing to bear in mind, if your iPad is still under any sort of warranty, using any unauthorized repair place may void that.
So you may find less expensive places that are non-authorized, but once you use them, Apple disowns your device and if you have any warranty left, it'll be void.

800 MHz G4 imac- what is the most RAM

Similar Messages

Maybe you are looking for