800 vs 400 and 9 pin to 4 pin - please help!!
I have a Sony DCR-HC48 with "base station" and just bought a 9 pin to 4 pin cable from Radio Shack. The Gigaware cable says speed supported up to 400Mbps. I plug the 4 pin end into the base station, and the 9 pin into the Firewire 800 port on the back of the computer. iMovie does not recognize the camera, nor is it recognized in System Profiler.
When I plug my Lacie external hard drive into the same port with a Firewire 800 cable, the drive is listed in the System Profiler under Firewire.
My thought is that the cable I have is the wrong one, even though it seems to fit. I'm assuming I need the same cable except one that supports 800Mbps?
Please help!!!!!
If your camera is FW400 and the only port on your computer available is FW800, then you have the correct type of cable, my only suspicion would be that you have a bad cable.
You might also try connecting the camera on it's own (with no other FW devices connected.
Similar Messages
-
dear ...
please help meeee.... my my secret question and apple id was blocked, please help me repair my apple id , i want to keep using this my apple id.
please helppppp meeeeeee......
<E-mail Edited by Host>Dendyhebatz wrote:
dear ...
please help meeee.... my my secret question and apple id was blocked, please help me repair my apple id , i want to keep using this my apple id.
please helppppp meeeeeee......my email & apple id XXXXXXX
Try changing your Apple ID password at iforgot.apple.com first.
Also:
How to reset your Apple ID security questions.
Go to appleid.apple.com, click on the blue button that says 'Manage Your Apple ID'.
Log in with your Apple ID and password. (If you have forgotten your Apple ID password, go to iforgot.apple.com first to reset your password with a password recovery email)
Go to the Password & Security section on the left side, and click on the link underneath the security questions that says 'Forgot your answers? Send reset security info email to [email]'. This will generate an automated e-mail that will allow you to reset your security questions.
If that doesn't work, or there is no rescue email link available, then click on 'Temporary Support PIN' that is in the bottom left side, and generate a 4-digit PIN for the Apple Account Security Advisor you will be contacting later.
Next, go to https://getsupport.apple.com
(If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
Choose 'More Products & Services', then 'Apple ID'.
A new page will open.
Choose 'Other Apple ID Topics', then 'Forgotten Apple ID Security Questions'.
Click the blue 'Continue' button.
Select the contact option that suits your needs best. -
My iPhone 4 wont turn on, It wont go passed the charging icon and then when I take the charger out it says it needs charge. Its not the charger as iv tried several and holding lock and home button doesnt work please help!!!!!
Hello there, Conorjl7.
The following Knowledge Base article provides some good, practical steps for troubleshooting issues with charging:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Particularly:
If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
Inspect the connector at the bottom of the phone:
Make sure that there are no bent pins in the connector.
Make sure that the connector is free from debris.
If there are bent pins or debris, please contact Apple Support.
Otherwise, continue troubleshooting.
Make sure that the outlet you're using works.
Make sure that the Apple USB cable and Apple USB power adapter work.
Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
If the device still exhibits an issue, try turning your device off and then on again while connected to power.
If the issue is persists, please contact Apple Support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Macbook Pro Mid 2009 Processor 2.26 GHz Intel Core 2 Duo, Memory 2 GB 1067 MHz DDR3. iOS 10.10.1 (14B25). My mac is running slow and have ran EtreCheck. Please help me fix my mac. Thanks!
Problem description:
My mac has been very slow lately. Any suggestions?
EtreCheck version: 2.1.2 (105)
Report generated December 14, 2014 at 8:15:29 PM PST
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2009) (Verified)
MacBook Pro - model: MacBookPro5,5
1 2.26 GHz Intel Core 2 Duo CPU: 2-core
2 GB RAM Upgradeable
BANK 0/DIMM0
1 GB DDR3 1067 MHz ok
BANK 1/DIMM0
1 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:54:52
Disk Information: ℹ️
Hitachi HTS545016B9SA02 disk0 : (160.04 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
MacHD (disk0s2) / : 159.05 GB (49.15 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS23N
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Startup Items: ℹ️
DVD3EnablerService: Path: /Library/StartupItems/DVD3EnablerService
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[failed] com.apple.AirPlayUIAgent.plist [Details]
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.coreservices.appleid.authentication.plist [Details]
[failed] com.apple.icloud.fmfd.plist [Details]
[failed] com.apple.secd.plist [Details]
[failed] com.apple.security.cloudkeychainproxy.plist [Details]
[failed] com.apple.telephonyutilities.callservicesd.plist [Details]
Problem System Launch Daemons: ℹ️
[failed] com.apple.ctkd.plist [Details]
[failed] com.apple.icloud.findmydeviced.plist [Details]
[failed] com.apple.ifdreader.plist
[failed] com.apple.nehelper.plist [Details]
[failed] com.apple.softwareupdate_download_service.plist [Details]
[failed] com.apple.wdhelper.plist [Details]
[failed] com.apple.xpc.smd.plist [Details]
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Support]
[invalid?] com.oracle.java.Java-Updater.plist [Support]
[not loaded] com.teamviewer.teamviewer.plist [Support]
[not loaded] com.teamviewer.teamviewer_desktop.plist [Support]
Launch Daemons: ℹ️
[running] com.adobe.ARM.[...].plist [Support]
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[invalid?] com.oracle.java.Helper-Tool.plist [Support]
[not loaded] com.teamviewer.teamviewer_service.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[invalid?] com.nds.pcshow.plist [Support]
[invalid?] com.nds.pcshow.uninstall.plist [Support]
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
WidevineMediaOptimizer: Version: 6.0.0.12757 - SDK 10.7 [Support]
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
iPhotoPhotocast: Version: 7.0
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Time Machine: ℹ️
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
MacHD: Disk size: 159.05 GB Disk used: 109.90 GB
Destinations:
KINGSTON [Local]
Total size: 30.88 GB
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Too small
Backup size 30.88 GB < (Disk used 109.90 GB X 3)
Top Processes by CPU: ℹ️
6% WindowServer
0% AppleSpell
0% SystemUIServer
0% powerd
0% Google Chrome
Top Processes by Memory: ℹ️
131 MB softwareupdated
112 MB Google Chrome
41 MB Finder
34 MB Google Chrome Helper
32 MB WindowServer
Virtual Memory Information: ℹ️
51 MB Free RAM
587 MB Active RAM
551 MB Inactive RAM
350 MB Wired RAM
10.96 GB Page-ins
865 MB Page-outs
Diagnostics Information: ℹ️
Dec 14, 2014, 07:37:58 PM Install Adobe Flash Player_2014-12-14-193758_[redacted].crash
Dec 14, 2014, 07:21:27 PM Self test - passedPlease describe the problem in as much relevant detail as possible. The "etrecheck" fad hasn't made that step any less necessary. The usual results of posting etrecheck output on this site without a full description of the problem are very poor.
The many "failed" warnings that etrecheck sometimes spews mean nothing. Those warnings are not a reason to reinstall the OS, or to do anything else at all. They should be ignored.
The better your description of the problem, the better the chance of a solution.
For example, if the computer is slow, which specific actions are slow? Is it slow all the time, or only sometimes? What changes did you make, if any, just before it became slow? Have you seen any alerts or error messages? Have you done anything to try to fix it? Most importantly, do you have a current backup of all data? If the answer to the last question is "no," back up now. Ask if you need guidance. Do nothing else until you have a backup. -
My macbook shut off and wont turn back on. Im pretty sure it is charging. The LED light is on but only when the laptop is closed. Im in grad school and have lots saved. Please Help!
ronicr76,
First it would be helpful if you post the exact model, year and OS version you have.
> The LED light is on but only when the laptop is closed<
So that light is the sleep indicator and tells us that the laptop is going to sleep when you close the lid. That would be normal behavior so the machine is still working. Possibly you're experiencing a backlight failure. With the machine supposedly "on" use a flashlight to carefully examine the screen. Do you see the desktop? Yes? machine is still running and something is wrong with the backlight.
You should immediately backup your computer or at the very least pull vital files off. With the computer hooked to another Mac (The way this is done depends on the exact MacBook, E.g.FireWire 800 to FireWire 800.) Then you restart the computer and hold the "t" key down. This puts your MacBook into "target mode":
How to use and troubleshoot FireWire target disk mode
Once your files are off try an SMC reset:
Intel-based Macs: Resetting the System Management Controller (SMC)
Are you able to get the backlight back on by opening and closing the display? Yes? Broken backlight cable refer to qualified service place. Even if it doesn't come on and you can still see the desktop with a flashlight it is still probably the backlight. Could be the a backlight problem also. -
Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support -
Just downloaded aperture 3.4 update for the app store and now it wont open please help!!
just downloaded aperture 3.4 update for the app store and now it wont open please help!!
Just want to echo this complaint.
I have tried re installing Aperture 3 and I've looked for preferences or something to clear, but nothing helps. It continues to crash each time I open it no matter what. -
Updated my I tunes yesterday and now it wont open, please help
updated my I tunes yesterday and now it wont open, please help
I thought is was too much of a coincidence that the adapter went out the same day, but sure enough it did. Just replaced it and it works fine. Thanks
-
I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
Thank you,
ChrisMichael,
Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
Best regards,
David -
please helpme i block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this should unlock with key and I should do for Please help!. thanks
Place the iPOd in recovery mode and then restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore -
how do I verify my apple id? I can't sign in to it in mail and I can't make a new one because it just will not process I'm trying to set up iCloud between iPad and iPhone and having ALOT of difficulty pleAse help need it done by later on today!!!!!
In order to use your Apple ID to create an iCloud account, the primary email address associated with the ID must first be verified. To do this, Apple will send a verification email to your account and you must respond to the email by clicking the Verify Now link. Make sure you are check the spam/junk folder as well as the inbox. If it isn't there, go to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right click Resend under your Primary Email Address to resend the verification email.
-
When i plug my ipod in, it shows up on desktop as a hard drive, but wont show up on itunes. All my music/videos everything has been wiped off somehow, restored it and still wont work! Please help!
- Have you tried the troubleshooting here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
- You can try disabling the camer notification
http://support.apple.com/kb/TS1500
- Do you have any camera, scanner or similar software installed? That may prevent iTunes from seeing the iPod. -
when i did all that shows up in disk utility now is something called expansion and all my opitions are greyed out in the partation tab, it doesnt mount and idk what to do please help.
Running macbook pro 2.53ghz late 2010
mountain lion
8gbs memI would try it on a PC and see if you can format it, then put it back on the Mac and try again. If it's not seen on a PC, then there's the strong likelihood that there's a hardware issue; either the bridge/chip set or the HD itself is dying/dead. There's also the small possibility that the cable is faulty, so I'd try a different cable too.
-
I just got the iPhone 5 and noticed that the message alerts will only alert once . I have it set up as 3 times and its not working . Please help. I'm running 6.0.2 and I really starting to get ****** off with apple products
Instead of getting annoyed, read the User's Guide and try basic troubleshooting.
-
InDesign CS5 is not opening after deactivation/activation. How can I fix this? Illustrator and Photoshop open and are working fine. Please help!
First of all, thank you for replying so promptly to my posts this morning!
I can't remember how I got the software on his computer, but I'm pretty sure it wasn't through migration assistant.
I was looking into doing an uninstall of InDesign and a fresh install. However, I initially downloaded the CS5 suite digitally and I can't find out how I am able to perform a fresh install of InDesign. Do you know where I find this info or gain access to download just InDesign again? I can't seem to find anything in my Adobe account that shows where I might do another download. -
i drop my phone so i got a new one and back up everything... well now i have pics on my phone that i dont want and i cant delete them please help i tired hooking up to iTunes but still cant delete certain ones.... i can send them or post but nothing to delete them
The pictures that are on your phone, that you don't want, did they appear there after syncing with iTunes? Or were they taken with the iphone's camera?
Pictures synced from iTunes have to be removed by syncing again, but not having those pictures checked under the Photos tab in iTunes.
Maybe you are looking for
-
My MacBook Pro is suddenly running very slow
I am running Lion and updated to the Safari 5.2.1 last month. About two weeks ago, when I woke up my MBP it started taking about two minutes to locate the WiFi signal (which used to be up and running in a few seconds.) Whatever I try to click on take
-
Post Author: MrJames CA Forum: Semantic Layer and Data Connectivity I'm sure the issue is my lack of understanding on how this should work. I've created a report using an XML data source. The fields on my report come from the XML file schema, and a
-
I have a lot of problems with ads in chat software, but this one's new. You have recently started serving a new ad for the Hungarian Vodafone, made in Flash. Sadly after a few loops it will use up a lot of CPU and render Skype itself (in particular!
-
GOT A MANY TROUBLES AND CRASH ON MY MBP 2011, MANY KERNEL ON MY MAC, WHAT'S ABOUT ? THE COMPUTER RESTART, AND STOP WHEN I WORK SINCERLY YOURS
-
Best way to have an image span two columns in a CSS layout?
My homepage is a typical fixed width three column layout. For the inside, content pages, I basically need the same layout except I need to have an image that spans the left and center columns at the top. Below the image, the left and center columns s