8000 A809n Installation Fatal Error - "HP Network Devices Support (HPSLPSVC) could not be stopped"
Where can I locate advice how to stop HP Network Devices Support (HPSLPSVC)? I would like to obtain info on "MSI.netdevicemanager01".
The only process related to HP that is running is "hpwuSchd2.exe". Is there a problem killing it?
Hi,
what OS?
your printer is a single function printer you can simply install the printer by doing this
http://uis.georgetown.edu/software/documentation/winxp/winxp.network.printer.html
at step 14 if have the disc just insert the disc and browse it and hit ok it will load the correct driver....
but if wanna do it in a more complicated way try this..
first restart you computer...
go to Crogram files\hp\digital imaging\bin look for HPSLPSVC you can delete the file. if not make sure under services.msc the network device is stop... then try again deleting it...
go to regedit...
go to the key under HKEY_Local_machine
go to system
go to current control set (other control set will be present make sure u do the same)
go to services
look for a HPSLPSVC delete the the whole key....
restart computer
reinstall the software..
hope this help...
Similar Messages
-
HP Network Devices Support service will not start
Product: HP Photosmart Premium All-in-one (C309g)
OS: Vista Business 32 bit
Errors:
When running the "Add Device" portion of set up to add the printer to my PC so it can be accessed wirelessly this pops up in the back ground: "The specified service does not exist as an installed service."
The result of the above process is the following message in the HP installer screen: "The HP software that enables networking is not responding. Cancel the installation and restart the PC."
As you may guess, I've had this printer for a while couple/few years at least, and I've been running it wireleslly for quite some time.
The printer is active on my wireless network, printing Wireless Network Test Report from the printer proves this. I can also access the printer's webpage by entering its IP in a web browser.
We first perceived the issue when HP Solution Center reported that the Printer was no longer connected. And it suggested doing something with the install, which sent me down the road of unintalls and installs.
I've run the HP Print and Scan Doctor, which tells me the printer is installed for use via USB, but the networked instance is not installed.
I still have the orginal instal CD for this printer. Running setup off the root of the CD, i get the "Later Version already installed" or something to that extent. I've also downloaded the most recent Basic and Full Feature Instals from HP site.
I've used Revo Uninstaller to do my uninstalls and I've run CCleaner after all the apps are gone from the program list.
I've read somewhere that this is related to the "HP Network Devices Support" service.
In computer management I can see that its not running, and it is set to start "Automatically (Delayed Start)"
When I try to start this service I get this: "Windows could not start the HP Network Devices Support service on local computer Error 2: They system could not find the file specified"
Somethings that have been done on this machine recently, i'm not sure when the Printer problem started...
Installed Quicken 2013
Installed iTunes
Changed my home network from Public to private on this machine so I could set up some media servers.
I've check through all the quarantined files of my antivirus and there didn't seem to be any HP files in there.
I'm hoping my issue is in fact this service, and somehow replacing the missing file its refferencing will fix it all.
My next step is to uninstall everything again, and make sure that service drops out of the list too, then reinstall from HP download.
This question was solved.
View Solution.I would suggest using the software scrubber built into the install to clean everything out. The steps below will walk you through it. Before doing step 10 from a CD or step 15 from a download, check the both program files folder to make sure that the HP folders get deleted.
From original printer installation CD:
1. Insert CD into drive, and then cancel the installer
2. Open My Computer, and then right click on the CD drive and chose open
3. Open folder Util
4. Open folder CCC
5. Run the uninstall_ L4.bat for non-HP computers. For HP computers run the Uninstall_L3.bat
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Use this tool to clean the registry. Note: This utility is not HP sponsored or approved. HP and I are not responsible for damages or loss of data caused by the utility. This step is optional. You can skip it if you want.
http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
10. Download the full feature software and drivers
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-73652-3&cc=us&dlc=en&lc=en&...
11. Run the download to reinstall the printer
From a download:
1. Run disk cleanup on your computer
2. Download and run the software and drivers below.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-73652-3&cc=us&dlc=en&lc=en&...
3. Once the download is done extracting, cancel the download.
4. Click the start menu.
5. Click Run.
6. Type %temp% in the run field
7. Look for, and open the folder starting with 7z (Example: 7zS2356)
8. Open folder Util
9. Open folder CCC
10. Run the uninstall_ L4.bat for non-HP computers. For HP computers run the Uninstall_L3.bat
11. When the uninstall has completed restart the computer
12. Run Disk cleanup from Accessories\ System Tools
13. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
14. Use this tool to clean the system and registry. Note: This utility is not HP sponsored or approved. HP and I are not responsible for damages or loss of data caused by the utility. This step is optional. You can skip it if you want.
http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
15. Download the full feature software and drivers
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-73652-3&cc=us&dlc=en&lc=en&...
16. Run the download to reinstall the printer
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
I am getting this error message when trying to download Mountain Lion. Previous version of my OS X is 10.7.4 and I already checked and double checked my username and password (which I can use fine on iTunes).
I am extremely dissapointed, #fail.
Please help!
ThanksOn your other computer sign into the App Store, then go to the Purchases tab and download Yosemite, Then download the program below. It will make a bootable install USB stick which you can use to reboot the computer/install.
Bootable USB Flash Drive – Diskmaker X -
Flash installation - fatal error. solaris installation program exited
Not very helpful to say the least. Seems to read the flar file and go through the upgrade and then come up with this error.
Any ideas?paulfoel wrote:
Any ideas?http://www.unix.com/solaris/217675-solaris-10-flash-installation-fatal-error-solaris-installation-program-exited.html
You could have mentioned you were cross-posting this to other sites. -
Network Device Support Service logging errors
The following error is logged for to six times per hour.
The HP Network Devices Support service terminated with the following error:
The specified module could not be found.
XML Detail is:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7023</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2014-08-02T03:21:54.757140700Z" />
<EventRecordID>1447175</EventRecordID>
<Correlation />
<Execution ProcessID="756" ThreadID="8396" />
<Channel>System</Channel>
<Computer>MarvOfc</Computer>
<Security />
</System>
- <EventData>
<Data Name="param1">HP Network Devices Support</Data>
<Data Name="param2">%%126</Data>
<Binary>4800500053004C0050005300560043000000</Binary>
</EventData>
</Event
Already having problem upgrading to Win 8.1 from 8.0 and this isn't helping. Anyone know what I can do to stop the errors? (This post also generated an error stating that invalid HTML was detected and removed and it was a direct copy from the Microsoft error log.)So what you're telling me is that it's a WINDOWS FILE that the HP Service is looking for? When it's an HP Service that will not start, and not a windows service that won't start? So why are the printers functioning properly, and listed in the proper places (meaning my system sees the P2015dn on the network and uses it with no problems), but the HP service is logging errors? FYI, the only HP network device I have is the printer.
You'll have to explain that one before I go to the trouble of doing a full backup and a clean install of Windows 8, then a full restore. You're talking HOURS AND HOURS here with no gaurantee of success, and I suspect having nothing to do with the real problem of a missing file that is probably authored by HP, not Microsoft.
It's beginning to look like you guys don't know what file it's looking for either. If it's actually a real windows .dll file and you know which one, I should be able to extract it from the windows disk to the proper folder and register it if needed. -
Error: Device 768 (vbd) could not be connected. /etc/xen/scripts/block fail
Hello OTN,
After converting/exporting machines from VMware and importing them into OVM i am receiving errors on some of the machines when powering on.
Here is the complete error message:
Start - /OVS/running_pool/dirkwin
PowerOn Failed : Result - failed:<Exception: return=>failed:<Exception: ['xm', 'create', '/var/ovs/mount/483E943AE684484EAD7255356E8F24CC/running_pool/machinename/vm.cfg'] => Error: Device 768 (vbd) could not be connected. /etc/xen/scripts/block failed; error detected.
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSXXenVM.py", line 57, in xen_start_vm
run_cmd(args=cmd)
File "/opt/ovs-agent-2.3/OVSCommons.py", line 85, in run_cmd
raise Exception('%s => %s' % (cmdlist, p.childerr.read()))
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSSiteVM.py", line 131, in start_vm
raise e
Searching for this error turned up different solutions but none of them worked.
One mentioned OVM not being able to handle spaces in vm names but this is not a working solution as most of the machines are just regular names without spaces or special characters.
Also interesting, sometimes this error does not turn up when powering on BUT the machine just powers off again and returns to its turned off state. Next power on the error returns.
OS types vary from S10, Win XP and RedHat so a possible connection to the error being the host OS is not there.
Harddrive types are set to auto. The vm.cfg's of functioning machines do not differ from non functioning machines besides the actual vm name in the vm.cfg
Any idea to this error or how to solve it ?
Thanks
-StephanHello Sebastian,
This is one of the vm.cfg which will abort due to the above mentioned error:
acpi = 1
apic = 1
builder = 'hvm'
device_model = '/usr/lib/xen/bin/qemu-dm'
disk = ['file:/var/ovs/mount/483E943AE684484EAD7255356E8F24CC/running_pool/vmname/vmname.img,hda,w',
',hdc:cdrom,r',
kernel = '/usr/lib/xen/boot/hvmloader'
memory = '2048'
name = 'vmname'
on_crash = 'restart'
on_reboot = 'restart'
pae = 1
serial = 'pty'
timer_mode = '0'
usbdevice = 'tablet'
uuid = 'a2a62bcb-f9ab-4ec3-8574-7415985cdf0a'
vcpus = 1
vif = ['bridge=xenbr0,mac=xx:xx:xx:xx:xx:xx,type=ioemu']
vif_other_config = []
vnc = 1
vncconsole = 1
vnclisten = '0.0.0.0'
vncpasswd = 'xx'
vncunused = 1
The xend.log also turned up nothing concerning this error. no messages were written into it. No other log has been created by xen in the /var/log/xen directory concerning an issue with the current machine.
Thanks for your help !
-Stephan
ps:mac address + pw is commented out
Edited by: Stephan Becker on Aug 5, 2010 7:11 AM -
After Loading Lion I now get 5 windows w/ a graphic of a Red Stop sign with an ! mark and the following text message:
"DAVE Networking
Dave kernel extensions could not be loaded! Error
71 - Too many levels of remote in path."
I have uninstalled DAVE and used Clean App to remove trace elements of program, however I still get the message and am unable to eliminate the error messages. When I click OK the message goes away briefly and then comes back up.
Any solutions would be great.Dave,
Thanks....What I did was load the free eval version of Dave 9.0 and then used the uninstaller which must have deleted the kernel giving me the problem.
Thanks for the response.
Razor -
ERROR The Audio Device supported by this application is not detected. the application will ex
Sound is fine but I get error message every time I try to start any of the creative applications that come in mediasource like the graphic eq, speaker settings, surround mixer, EAX and THX consoles; the error: The Audio Device supported by this application is not detected. The application will exit.
I have read the forum notes on this error message and seems other have had this same issue, but I don't see any solutions...if anyone knows anything about solving this little mystery, please reply - need to get into that console to fully utilize this sound card.AFTER AUTOUPDATE this problem began. I removed the audigy package and reinstalled everything from the factory CD and still get this message. This happens every time I update the audigy drivers and thx. I am tired of doing recoveries to get audigy to work. Too bad I keep forgetting that the updates cause this problem. Audigy Platinum 2 works fine wothout the update. I will never update again!
How can I resolve this problem short of a full recovery? -
Error msg. states: the iPad "iPad" could not be updated. An unknow error occurrred (-1).
error msg. states: the iPad "iPad" could not be updated. An unknown error occurred (-1). My iPad is 16gb series 2 i believe wifi enabled
Hey there charlottefromwilliamsburg,
I see that you are experiencing and issue when attempting to update your iPad. Here is an article for you that may help you address this error:
Resolve iOS update and restore errors - Apple Support
http://support.apple.com/en-kw/TS3694
I would suggest that you particularly pay attention to the information in the following section, which addresses error codes such as the one you have been given:
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
Script error line 2053 the specified module could not be found URL res://ieframe.dll/preview.js
Script error line 2053 the specified module could not be found URL res://ieframe.dll/preview.js
The issue is caused when Windows creates the printer profile in the control panel that it doesn't correctly create it with the drivers.
We're not going to completely uninstall all the HP software, instead we're going to remove the corrupt Windows printer profile and reinstall it. Total time for this on an average computer is about 5-10 minutes to completely repair (including reboot).
1) Navigate to Start Menu > Devices and Printers or Start Menu > Control Panel > Printers
2) Select each printer profile for the printer with an issue, then select remove device/printer.
3) Reboot
4) Navigate to Start Menu > All Programs > HP > insert model # here > Add Printer (or Setup Wizard)
5) Follow the setup prompts to reinstall the printer profile and it recreates the Windows printer.
6) Run the HP Update Tool from Start Menu > All Programs > HP if your printer installs it, rebooting afterwards if necessary.
7) Test by printing google.com (uses very little ink when the test page comes out).
Let me know if you have any questions or issues.
Thanks,
Dan
I work for an internation tech company and personally perform thousands of computer repairs a year. I'm based out of the US working for a US company, and have been working on computers for over 13 years.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem**** -
having a problem updating to itunes 10.5. it installs but when i try to run, it gives an error that old apple software update could not be removed
From the article that the question was posted from:
Error 1611
This error typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
Try reading the solutions you find in the future and follow them. -
I have the current version of itunes, but when I go to update my ipod, I am getting an error message that says that it could not back up because the backup was corrupt or not compatible with the iPod. This is the first time trying to backup the iPod. I have authorized my computer. Still no luck.
Go to iTunes>Preferences>Devices and select the iPod backjp and click on delete and try again.
Also
- Reboot the computer
- Try another cable
- Try another USB port -
I try to download the OS X Mountain Lion, and I keep getting an error saying, "The product distribution file could not be verified. It may be damaged or was not signed." Please Help!
If you have Intego VirusBarrier X6 installed
1. Open /Applications/VirusBarrier X6.
2. Click on the "Surf" button.
3. Click on the "Ad Banner Filter" tab.
4. Click "OFF" next to "Banner advertisement filter".
5. Start the computer in Safe Boot, then restart the computer into normal mode.
If don't not have Intego Virus Barrier installed
1. Verify that the date and time is correct on the computer.
2. Safe Boot once, then restart normally, then try downloading again.
3. Try with a different user account if the issue persists
If the issue persists
Install Lion onto an empty partition (internal or external).
Note: You can Use Disk Utility to live partition the internal drive and create a second partition large enough to install Lion.
Start from the clean installation of Lion.
Download Mountain Lion from the Mac App Store. Note that the original startup disk can be set as the destination for Mountain Lion during the installation process. -
keep getting error message saying ipod detected but could not be identified properly - I have tried all the steps on the support page twice and it still will not work! I am running windows 8 (which it has worked with ok before) - struggling
I recently bought some new albums and can't play them on my ipodI just encountered the same problem on my 2 month old MBPro. I found a work around by changing USB ports. As for the actual cause or the reason why that worked, I dont know. The USB port I was using works fine with my phone or other USB devices.
-
I am trying to build an executible program that will be portable to machines which do not have CVI installed. It works fine on my CVI v9.1 system. However, whether or not I include "Full run-time support" in the build options, I get the error "The procedure entry point _UP_GetActiveTreeCell could not be located in the dynamic link library cvirte.dll" when I try to run it on a machine without CVI. Please help.
To run a CVI application on a system were the CVI IDE is not installed you need to have the CVI RunTime Engine installed. According to the error message at the bottom of this page you may have an older RTE installed in the target system.
To obtain it you can either download the RTE and install in the target system or better let the IDE build a distribution disk that installs all necessary software in it: this guide drives you in creating the appropriate installer for your application: you can find it also in CVI help function.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?
Maybe you are looking for
-
Bootcamp slowing down performance
Hi all, I installed Windows 7 ultimate using bootcamp the other night, and I've been finding that on the mac side of things, things have gotten a bit slow. Loading applications, including native ones such as system preferences take up to 10-20 second
-
<PRE> Dear All, In our project, we are using EJBs as Model. I have created EJB and placed them in EAR file. When i am trying to deploy the EAR file i am getting the following exception. Jun 11, 2010 9:58:00 AM /userOut/deploy (com.sap.ide.eclipse.sdm
-
How to find a filed SORTL in Vendor Master
Hi Experts, In venoder master, where to find SORTL file? HOw to update this field? I am able to see SORT1 AND SORT2 fields but not SORTL Thanks and regards Ram
-
Why have all my PDF icons suddenly appear as shredded icons?
-
My iphone 3GS was updating to iOS 6. It stopped updating halfway through the process. Now my phone won't turn on. Endless bootloop.