8000 Wireless Printer no IP address

The printer's on line light is on .
The Network Configuration page shows the address as 0.0.0.0
I reset it. The wireless status still shows disconnected/offline.

The software is upto date (Windows 7).
The 8000 wireless printer on-line light is showing that it is on-line.
The printer was printing wirelessly with that computer.
I can not log into the printer with it's IP Address anymore.
I did the rejet I found on the HP web site for wireless reset..
Does anyone kno how to reset to factory settings?
Thanks

Similar Messages

HP Officejet Pro 8000 Wireless Printer - A809n.says it's out of ink but has new cartridge

about 6 monhs ago the printer stopped printing stating it was a out of ink (black) after i replaced the cartridge it stopped again after about 10 days. i contacted HP and they basically told me to get a new printer. i decided to try a new cartridge again and reboot etc, etc. it still would work i use my other HP printer before looking to buy another. i read on the internet that this was a frequent problem with the HP Officejet Pro 8000 Wireless Printer - A809n. and it might be an printhead problem. i replaced the printhead and any low or outdated ink cartridge. the printer worked perfectly for 4 weeks. now i am having the same problem. this sticks. it is leaving a bad taste . i have been a loyal HP user i feel HP has made a questionable product and is not standing behind it.

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

My Officejet Pro 8000 wireless printer prints to only 4x5" on 8x11 sheet when printing mult pages

My Officejet Pro 8000 wireless prints to only 4x5 inches on the 8x11 sheet when I try to print multiple pages per sheet from an Adobe file. The print preview shows the paper dimensions to be 8x11, and the four Adobe pages are properly scaled to fill the 8x11 printed sheet, yet when printing, all the printing is condensed to the upper left quarter of the sheet.

What did it? I was still trying to figure it out

HP Officejet Pro 8000 Wireless Printer: Still getting vertical white streak on copies

HP Officejet Pro 8000 Wireless Printer: Still getting a vertical white streak down pictures. I have changed the yellow/black printhead. One helps note says I should try cleaning the scanner glass. Where is the scanner glass, and how do I get to it?
Any other possible solutions for getting rid of the vertical line? Thank you.
This question was solved.
View Solution.

HI,
THis looks like a issue with the printer itself as it indeed is a vertical mis. A cartridge issue would cause a horizontal issue. What you can tru is cleaning the carriage rod, the metal bar that you see in the printer, and carefully clean the transparant strip. Do this very carefully as its pretty delicate and if it breaks the unit is ready for trash.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

Can't Upgrade Firmware in Officejet 8000 Wireless Printer

I've been using this HP 8000 Officejet wirelss with a single usb connection without any issues at all. I set up a two computer wireless network with this printer also being wireless several days ago. No issues at all with the setup. The printer worked fine with test prints, etc. After several hours though I found the printer would loose connection as far as being able to print. It shows up as an avaialble printer, but will not print. A complete powerdown of the printer is necessary to get it working again. This would happen about every 2 to 3 hours. So I tried connecting the printer to the router with an ethernet cable. The problem is not as frequent now, but still happens. The firmware of this printer is 0842BR. There is a firmware upgrade for this particular printer which is supposed to fix issues with network connectivity plus a few other things. I cannot get this firmware upgrade to work with either Windows XP or Windows 7. In XP I get the error message: Firmware Download Utility has encountered a problem and needs to close. In Windows 7 if I just run the file, it extracts to about 47% and then just disappears. If I try to run it in compatibility mode, it says there is a problem with the file.
Can anyone please help me with getting the firmware upgraded, or does anyone have any suggesting on getting this printer to work reliabily on a network. I havee another Officejet Pro 8000 wireless at home on my home wireless network and it works perfectly. It has different firmware though. Thank you for your help!

I had similar problems trying to install the firmware from two different PC's running Windows 7-32-bit and Windows 7-64 bit.
I had an older system with a clean install of Windows XP SP3 that this Printer had never been connected to.
I downloaded and installed the latest "Basic" Printer Driver as well as the Firmware Upgrade to that PC.
I powered off the printer and disconnected and reconnected the AC power supply to assure a clean power up state.
I left the USB cable disconnected until the driver installation directed me to connect it.
I installed the "Basic" Driver for USB connectivity. I initially had connectvity problems trying to "talk to" the printer but switching to a different USB Cable solved that problem.
After all the above, the Firmware install went as described in the HP description.
The printer now reports the upgraded Firmware Version of "1006BR"
I hope my experience helps you with your firmware install.

Planning on installing HP Officejet Pro 8000 Wireless Printer

    I have Cisco Network Magic Version 5.5.9195.0-pure0 (base installed on Windows XP (SP2) - ethernet cable connected to a new Linksys router E2000.
     Cable connection (via Comcast) to the internet
    Will this HP printer be a good choice (has wireless and Ethernet connectivity) to use on my new home network
    Just installed the Linksys E2000 and the Cisco Network magic software.
    Do I need to install the HP Officejet Pro 800 pronter drivers on all PC / Laptops in my network (currently 3)
             Thank you,
                       Len ........

HI,
THis looks like a issue with the printer itself as it indeed is a vertical mis. A cartridge issue would cause a horizontal issue. What you can tru is cleaning the carriage rod, the metal bar that you see in the printer, and carefully clean the transparant strip. Do this very carefully as its pretty delicate and if it breaks the unit is ready for trash.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

Unable to Delete Older Printing Presets -- Officejet Pro 8000 Wireless Printer with OSX v10.6.4

I find that, after upgrading to the latest Officejet Pro 8000 A809 (989005) printer driver, I am not able to delete Presets that were created with earlier versions of the Apple/HP supplied printer driver. I am using OSX v10.6.4 and v2.0.3 of the HP Printer Driver.
When I try to print from an application the Presets that had been previously created appear on the menu, but 'Delete" is not available as an option for any of those older Presets.
If I create a new Preset, it appears in a section of the menu listing below the Presets created by earlier versions, and the Delete option is available to remove any Presets made with v2.0.3 of the driver.
I would like to delete the earlier Presets, since are no longer necessary given the changes that have been introduced in the latest versions of the HP printer driver.

If you have HP software for pre-10.6 Snow Leopard, you must uninstall the software using the 'scrubber' option. Also, you do not need the hp software at all - both print and scan drivers are built into the OS. I'd recommend uninstalling, but make sure to do it this way:
Go to Applications/Hewlett Packard/ click on HP Uninstaller
Click on Continue
Highlight your device on the left pane
Hold the Ctrl, Opt and Cmd keys and click on Uninstall
There will be a pop up that asks if you are sure you want to uninstall ALL hp software. (At this point, if you continue, any HP printers you have installed will need to be reinstalled)
Click Continue and let it finish
Restart your Mac
Now, run a Software Update.
Next, remove and re-install the printer in System Preferences, Print & Fax.
You do not need the software now since Snow Leopard has both print & scan drivers built-in. Scan from Preview or Image Capture apps. Scanning from the front panel of the printer does not yet work.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Officejet Pro 8000 wireless printer is "not connected."

My Office Jet worked like a dream until I had to change my network settings, specifically my wireless network password. I reconfigured the printer with the new password, but now whenever I try to print, I get an error message saying the printer is 'not connected.' If I connect via USB cable, it works fine.
The network configuration printout shows that the printer is connected to the wireless network and the diagnostics (wireless on, wireless working, etc) all read PASS.
I am using a MacBook.
Help?

try this on the touchscreen of your printer ...
- go to "Setup"
- select "Network"
- make sure the "Wireless Direct" feature is enabled
I was having the same problem(s) and this solved my issue

Any experiences with the HP OfficeJet Pro 8000 Wireless printer?

I'm thinking about buying it after reading the XL black ink cartridges yield 2200 pages. It's not an all in one. I don't need it, already have 2 of them. My Epson CX4800 constantly needs to have the print nozzles cleaned and has banding problems. I can clean them, get them clean, then in the middle of a several page job, it starts banding again or loses a color. How are the HP printers with this problem? All the friends homes that I go to that have HPs seem to print much faster than the Epson I have also.Thanks in advance.

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Brand new HP Officejet Pro 8000 Wireless Printer

When turned on the light in the on/off switch continues to flash & the printer continuously cycles through its set-up mode. If we try to print while this is going on we end up with illegible final material.

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Air print with hp officejet pro 8000 wireless printer - a809n

The question is the same as the subject: how to air print?

Hi,
Hope these instructions and tips help:
http://reviews.cnet.com/8301-19512_7-20023976-233.html
http://www.aramistech.com/tips-tricks/enable-airprint-in-windows-and-use-any-printer/
Pease post back the result.
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Officejet Pro 8000 Wireless printer

I have black ink seeping out below where the printheads are located, on the right of the machine. The ink cartidges are on the far left of the machine. The printer works, and I have done all the various print diagnostic/calibrating tests.
Anyone have any idea why, and from where exactly, it is leaking, and is there anything I can do about it myself? The printer is 4 years old and has worked very well, and is still working.

Changed printheads since black ink spots on printed material. Worked for a week and now happening again. Any suggestions?

OJP 8000 Wireless won't print landscape with Quicken 2008 Deluxe R9

Hi All,
I've been using Quicken for years with a HP LaserJet 4L in the "Landscape" mode.
My new OJP 8000 will print landscape from other programs, but not from Quicken.
Computer is:
HP Pavilion dv9500 Notebook
Vista Home Premium Service Pack 2
32-bit OS
Printer is:
Officejet Pro 8000 Wireless Printer - A809n (C9297A)
Install disk is: Officejet Pro 8000 A809, Vista Version 12.0.0
Quicken is:
2008 Deluxe R9
Thanks for any help,
Scott

I don't have a solution for you, but I feel that I should mention that Quicken has all kinds of printing problems since last years release. I've basically given up on Quicken as a result. I have found that with online banking I don't need to use Quicken as much as I used to. It's really a shame that a software company should screw up a really good product over the years, but that's exactly what they did. They have known about these printing problems for the last 2 years and have done little to solve them. Soon I will be uninstalling it from my computer.

Ojpro 8000 wireless light keeps timing out

Hello, I have a new ojpro 8000 wireless printer (to replace my previous printer of the same model which died after warranty).
Working on an iMac using Airport Express as router. Printer is connected only wirelessly. Printer's IP address is 10.0.1.4. No MAC filtering or hidden SSID.
I can reach the 10.0.1.4 web page with no problem. The page does not indicate any problem. Printer works fine. But the wireless connection, or at least the blue light, seems to go to sleep when there has been no activity. I can turn it on by pressing the wireless button. I can still access 10.0.1.4 even when the light is out!
This did not happen with my old printer, and the wireless configuration has not been changed.
**New observation... While typing this note the light was out. Then, on an impulse, I tried to print a document. It started printing and the blue light had come on by itself.**
So, given this last observation, I'm not sure if I even have a problem here, but the light used to not go off by itself in the past, so I am a little concerned.
Any advice?
Thanks, Bob
This question was solved.
View Solution.

As long as it prints and scans as you want it to, I say just ignore the blue light. If you can't stand it, put a piece of black electrical tape over it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Firmware update for HP OfficeJet Pro 8000 wireless to fix load paper issue - as for the 8500?

Is there any hope that that soon will be a firmware update to fix the issues loading paper and the printheads for the HP OfficeJet Pro 8000 wireless printer?
A month or two ago there came a firmware update to the HP OfficeJet Pro 8500 wireless, which has some of the same issues,
and allegedly should have the much of the same load-mechanism as the 8000 printer.
It would be great, as we are on the fourth (4) replacement of this HP 8000 printer. For example, it would be great if we could use normal (80g) paper and not has to use (HP) 90g paper, as this prevents us from using the duplexer and only print on one side.

Thanks for the advice to contact HP tech support!
I have tried in multiple ways since November 2009 to contact HP, when I got the first (of 4) printers. The first 3 printers was subsequently replaced.
Finally in late June 2010 I got the message that there was coming an firmware update for Windows, but not for Mac's. The firmware should improve among other things the paper pick up (load paper issue) and the print-heads life.
I have applied the Windows firmware on the printer from a pc, but still seems to have load-paper issues, even using HP Bright White paper, when printing from Mac's. I have not tested the printing from a pc, but assumes that a firmware upgrade the printer, and are not specific to a certain OS.

8000 Wireless Printer no IP address

Similar Messages

Maybe you are looking for