8002A548 PS3 Error On BT Infinity 2.
I got BT Infinity 2 and everything works well except my PS3 - I keep getting this error. I know its common with wireless connections but I get it via a wired set up. My router is the BT Home Hub 4, I have disabled the firewall, set up a DMZ. I get NAT Type 2 on my PS3 and when this error occurred I went on the web browser (Which worked) everything else on my network runs flawless even when this error occurs. I have opened my network as open as possible.
What I have tried so far is -
Manual set up on PS3
Auto set up on PS3
DMZ with static ip (Manual network set up on PS3) (The home hub uses Mac address instead of ip for DMZ)
DMZ with DHCP (Auto network set up on PS3)
Wired
Wireless
Used safe mode and rebuilt database
I really have no idea what else I can do. I exclusively used a wired connection with a manual network set up on my PS3, static ip and DMZ until this started happening. The only thing I see is my Ethernet is slightly damaged on the outer part of the cable and some nicks and the like as its a long Ethernet as my bedroom is upstairs and my router is downstairs. Like I said it only happened recently and I set up my router config and my PS3 as open as possible. I am at a loss, like I said the only thing I can see is my Ethernet which is kinda damaged. Would this be my issue?
Kind regards.
*This is my signature...it's a bit boring*
Yes but I have had no reply, I have looked at some stuff and what seems to be common is its either a wireless issue which is not relevant to me as I use wired or being restricted by the router I do assume they are talking about the firewall which I have disabled. I have set up my DMZ again and enabled always use this ip address on the router to give my PS3 a static ip and left everything on my PS3 network settings all on auto. I hope it works.
What I have disabled on my Home Hub 4 is the firewall and upnp extended security in vain hope it opens my connection more, I have tried port forwarding but it does not seem to make a difference. I get moderate NAT on black ops 2 with port forwarding set and any other set up I do except with DMZ with either static or dhcp then I have open nat. So it could be the Home Hub 4. I am confused.
*This is my signature...it's a bit boring*
Similar Messages
-
Moved 8002A548-PS3-Error-On-BT-Infinity-2
Moved to other BB Queries http://community.bt.com/t5/Other-BB-Queries/8002A548-PS3-Error-On-BT-Infinity-2/td-p/885900
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’Yes but I have had no reply, I have looked at some stuff and what seems to be common is its either a wireless issue which is not relevant to me as I use wired or being restricted by the router I do assume they are talking about the firewall which I have disabled. I have set up my DMZ again and enabled always use this ip address on the router to give my PS3 a static ip and left everything on my PS3 network settings all on auto. I hope it works.
What I have disabled on my Home Hub 4 is the firewall and upnp extended security in vain hope it opens my connection more, I have tried port forwarding but it does not seem to make a difference. I get moderate NAT on black ops 2 with port forwarding set and any other set up I do except with DMZ with either static or dhcp then I have open nat. So it could be the Home Hub 4. I am confused.
*This is my signature...it's a bit boring* -
Thought this might help people out when they get an error message and want to know exactly what the issue was. If the mods are aware of any more codes could they please add them to the list.
80029945 - Can’t playback burn BDr movie (error in picture above)
80029946 - Attempting to play burnt Dual layer NTSC disc on a Pal ps3
(workarouns is to transfer files to ps3 via TVersity)
(added 24th Sept 2007)
80029301 - An error occurred during the delete operation (attempting to delete
some ps2 homebrew from virtual mem card) (added 15sept2007)
80029516 - Sign in to PLAYSTATION-Network (needed for some games or Ps3
processes - have to sign in to use them) (added 04-sept-2007)
80710A06 - An error occurred during the install operation (error when downloading
game from PSN - network error occured (added 30thAug2007)
8003041F - An error occurred during the copy operation (using media server) (added
27aug2007)
80010006 - An error occurred during the start operation (added 22aug07 - corrupted
folding install)
80010007 - An error occurred during the start operation (added 17aug07 - during
disc swap tests)
710102 - DNS Error; No DSN server available.
8013030 - System Error due to failed update download
80010001 - Major Error , Game ability stopped
80010017 - Can’t start Blueray Game
80010510 - Will not play hard drive games - Cause unknown
80010516 - An error occured during the start operation; Ps1 game swapped using
the eject function and then play pressed quickly - ps1 game inserted
again
80029023 - Exchanging Key Information exchange has timed out
80029024 - “Cannot Obtain an IP address”.
80029564 - Downloaded Game will not install - Cause unknown
80030920 - An error occurred during the copy operation. The file may be corrupt or
there isnt enough memory. Try copying data from original source.
80031150 - System Settings Fail to Save - Possible Blue Screen “Setting information
is corrupted.Pre
80031601 - Error Creating Account
80130203 - PS3 connects to internet but not to network - Typically means that the
required ports are
80410418 - DNS Error
80710016 - Playstation Network is down.
80710092 - “An error has occured. you’ve been signed out from the ps network” -
(connection dropped?
80710101 - Conneciton error
80710102 - IP conflict , PS3 Cannot connect to the router with current IP information - Try rebooting your router
80710541 - The connection to the server timed out. ***** the x button to repair and
restore default”
80710723 - Possible Port Error - Try opening ports , TCP port: 80, 443, 5223 and UDP
port: 3478, 3479, 3658. or add Ps3 to DMZ
81019002 - Error copying saves from location A to location B not open to connect to
store but PS3 can connect to internet.
8001050B - Will not play demo hard drive games, when blue-ray disc is inserted -
Cause unknown
8001050D - An error occured during the start operation; Ps3 game swapped using
the eject function and then play pressed quickly - ps3 game inserted
again
80028EA5 - Unknown?? User cannot connect to PS3 network. Sony told the user to
send the machine in.
80028ea6 - Connection error , Possible Proxy error power cord. Then shut off your
modem/router, for about 5 mintues, then turn the modem back up first
and let it sync, then turn the router back on(if using one) and let it sycn.
Reconnect your power cable and flip the back swtich up again. Then
make a new network connnection.
80028F10 - Go to Display Settings then HDMI (or whatever your connection is) and
choose Automactic,
80028f17 - Ps2 disc Boot Error , An error occured during the start operation; Ps2
game swapped using the eject function and then play pressed quickly -
Backup ps2 game inserted again
80028F18 - Ps2 Disc Error, unsupported disc; eg. Utility discs, BB discs, IQ Remix
game etc. ode).
80028F19 - PS2 Disc Error , fsck; the internal PS2 disk got corrupted and I guess that
you can use HDD utility disc to fix it
80028F1A - Ps2 Disc Error , invalbnnetcfg; network config error
80029C68 - Corrupt data usually on external device
8002A10D - Unable to Add friend in XMB
8002A4A6 - Cannot load game to play online
8002A515 - Error Signing in
8002A548 - Unable to remain logged in - either to game or server
8002A705 - Unable to connect to server/host. Check router port configuration.
8002a71a - Possible NAT Error , Can log onto Game Server but can’t join game and
can’t host game
8002b241 - DVI has no audio
8002F994 - To many people downloading the update just sit back until the morning
around 5am - 11am and you should be able to get it.
8002F997 - Trying to Update the Firmware, copying to a file and installing from a USB
drive falied”.
8003051E - Game will not Save
8013013D - “A connection error has occurred” - May be to do with the SSID of the
Router or signal strength if the conneciton drops Putting the PS3 into
DMZ may help - otherwise check WPA key Ps3 can’t handle WPA2 only
WPA or none
8013013E - WEP Key error, change WEP key to all numbers (on router homepage)
and try agian, or which to WPA. - Otherwise disable security
8013030F - Check Router Page, SSID Broadcasting possibly off.
8013030F - Access Point not detected
80410A0B - Internal PSP error, hardware fault. Send back to be replaced/fixed.
807101FF - An error occurred during communication with the server. This is a DNS
error This is a DNS error
8071053D - Hard boot the PS3, turn off the PS3 to stand-by, flip off the back swtich
and remove the
80710B23 - PS3 Network is Down or PS3 Network is too busy to respond
80710D23 - Turn the PS3 off for a bit (30 minutes give or take) with the power toggle
(not standby mode)
80029513 - Copyright Violation when attempting to install gameValiX wrote:
There is only one error code for the Xbox 360. ............ This topic should be pined.I know I pined it -
PS3 error: "An Ethernet cable is not connected" with E2000
Problem: My PS3 displays An Ethernet cable is not connected almost immediately after logging in. I am connected through a Linksys E2000 router. If I reset the cable modem, it will work for 10-15 minutes until it errors out again. If I plug the PS3 directly into the cable modem, it works fine. I'm really confused.
1. I do not believe it is the router, as my computer is also connected to the router, and works fine. My Touchpad is connected wirelessly and also works fine.
2. I do not believe it is the PS3, because it works fine if I plug it directly into the cable modem. I tried switching to wireless and it finds a lot of other signals (including mine), but I have the same problem if I choose wireless.
I first had this problem with a launch PS3 and a Netgear router after almost three years of no problems. This was back in November 2010. I replaced it with a Linksys E2000 router in January 2011, and a slim PS3 in late September 2011.
I had no problems from January until last weekend. I have tried to do the DMZ trick, but no luck. I have also tried to set the primary and secondary DNS to 4.2.2.1.
Does anyone have any insight? If I need to buy a new router, I will, but I don't understand because it works for my computer and Touchpad. Is it something crazy like when November comes, my internet settings get corrupted?Try using the DHCP reservation feature to give your PS3 a "static " ip outside of the DHCP server range. So something above the range called "IP Address Range". 192.168.1.150 should be good, but you can check to confirm that this address isn't in that range.
Make sure your PS3 is set to obtain the network information automatically, NOT through a custom setting. Also, make sure your PS3 is turned off completely before doing this.
Could you also give us a screenshot of the "signals" tab when you go to 192.168.100.1?
I don't work for Cisco. I'm just here to help. -
Playstation 3 (PS3) error 80029564
Hello, I've been having a problem downloading games and game updates on my new Playstation 3. I've been researching the problem from the Sony side, but as far as I know it could be a problem from the Verizon side.
The error number 80029564 comes up while installing, and tells me that the data is corrupt. In each case, the error comes up at 14% installed.
My Gear:
I have a brand new PS3 that I just purchased a few days ago.
I use Verizon FiOS for internet. I have a combo modem/router model no. MI424WR-GEN2, hardware version E, firmware version 20.19.8.
What triggers the error:
I usually get the 80029564 error when I try to download a game or install an update.
For example:
Little Big Planet 2 - finally did work on about the 4th try.
Rachet & Clank: All 4 One - I've tried several times, and it always gives me the 80029564 error.
Also, we bought Gran Turismo 5. It has 21 updates. It never makes it past update 10.
Attempted Solutions (that failed):
Some things I've tried in my effort to fix the problem:
- switched from wi-fi to ethernet connection
- safe mode - rebuild database
- set firewall to Low
- switched DNS to Google IPs
- verified that uPnP is enabled on the PS3 and the router
- set up DMZ for PS3 IP
Still, problem not fixed. This is very frustrating, we've spent more time trying to get games to work than actually playing anything.
I'm hoping there may be other FiOS customers who have tackled this problem and can help me out with a solution!brianh71 wrote:
Thanks for the information. I don't have a solution yet. I thought about trying the premium tech support, but the links I've found to it are broken.
The link about the NAT table issue is interesting. It at least gives me the idea that I should check out the router log for errors that might give me a clue.
I've thought about just calling Verizon and asking them to send someone out, but I'm more than a bit concerned about what kind of bill I might get from Verizon for that. Plus, I thought about trying the premium tech support, but the links I've found to it are broken.
I don't know how to resole your issue, since I have no PS3 myself, but the link, at least, I can help with: http://www22.verizon.com/home/expertcare/
Also, I can almost guarantee that a truckroll to fix a gaming system issue would be expensive, and potentially futile. It is unlikely that a field tech would be familiar enough with the PS3 to be of real help. (Though you might get lucky. It's just outside of their normal scope of support.)
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having." -
PS3 ERROR - Could not print because the disk is not available...
This error message is appearing when printing to Colorburst RIP from PS3.
It started all of a sudden.
I can print to the Epson standard driver with no problem.
I can drag a file into the Colorburst RIP and it prints fine.
It's an issue from PS3 it seems.
Any idea what is up here?
S.O.S.
Apple OS 10.5.2, Mac Pro Dual Quad 3.0 (new), 10gb ramYou're welcome. Glad you're up and running.
Anytime something starts acting weird "all of a sudden", trashing preferences is the first thing to try. -
RoboHelp 9 HTML Memory Error while processing keywords during layout generation
While I am attempting to generate a project that has never been generated, I am getting the following error when it states processing keywords.
I have no other programs open during the generation and am not really sure why I am getting this error. I currently have Robohelp 9.0.1.232 installed and there are no other updates available.
I have plenty of memory and RAM available to do this, so why is this happening with this one project?Tell us more about your work environment.
Project on the local drive? Generating to the local drive.
The error message shows Infinity 4x before RoboHTML.exe. What is Infinity 4x in this context?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge -
I get this error alot when trying to sign into playstation network on my wireless system at home. I use to get it alot also when I had a linksys wrt54g router and I recently replaced that with a netgear Wrn2000 router. Apparently lots of people have this issue (based on google search) Any ideas on what I can do to straighten it out? Most of the time unplugging the router then plugging back in fixes it but there's gotta be a fix for it I would imagine.
Thanks!#1 Did you see the info that is at
http://www.ps3errorcodesfix.com/ps3-error-80710102
#2 What is the brand and model of your modem?
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button. -
Calculating Percentages of expressions in a matrix
I am having difficulty calculating the percent change in an SSRS 2008 report using a matrix and groupings
I am getting errors NaN or infinity or the incorrect %.
Goup 1
Group 2
Actual
Budget
Variance
Percent Change
Actual
Budget
Variance
Percent Change
Type 1
1.55
1.64
-0.09
(5.24%)
1.42
1.53
(0.1043)
(6.84%)
Type 2
8.11
7.36
0.76
10.29%
0.00
0.00
0.0000
0.00%
Type 3
0.95
0.98
-0.02
(2.33%)
0.58
0.71
(0.1353)
(19.00%)
Type 4
2.15
2.01
0.14
7.13%
1.22
1.20
0.0238
1.99%
Type 5
2.15
2.12
0.03
1.47%
0.96
0.92
0.0328
3.55%
Type 6
2.27
2.12
0.15
7.32%
0.90
0.73
0.1763
24.21%
Type 7
1.69
1.41
0.28
19.98%
0.83
0.78
0.0532
6.85%
Type 8
2.70
2.65
0.05
1.90%
0.97
1.01
(0.0401)
(3.98%)
Grouped by Type
The fields are expressions as follows:
Actual: =IIF(Sum(Fields!ActualDRGWeight.Value)>0,Sum(Fields!ActualDRGWeight.Value) /sum(Fields!Current_Actual.Value),0)
Budget: =IIF(Sum(Fields!BudetDRGWeight.Value)>0,Sum(Fields!BudetDRGWeight.Value) / Sum(Fields!Current_Budget.Value),0)
Variance: =(sum(Fields!ActualDRGWeight.Value)/sum(Fields!Current_Actual.Value))-(sum(Fields!BudetDRGWeight.Value)/sum(Fields!Current_Budget.Value))Hi ,
It might be because of two reasons :
i)make sure all the Fields involved in calculation are of compatible data type
ii)IIF - Divide by zero error -
http://www.allaboutmssql.com/2013/09/ssrs-divide-by-zero-error-myth-of-iif.html
Suppressing Null or Zero Values at Run Time
http://stackoverflow.com/questions/5471817/ssrs-2008-dealing-with-division-by-zero-scenarios
sathya - www.allaboutmssql.com ** Mark as answered if my post solved your problem and Vote as helpful if my post was useful **. -
Get ORA-32157 when dml on multiple rows using iterations
I've used setMaxIterations() of oracle::occi::Statement to insert 50 rows successfully but sometimes throws exception: "ORA-32157: Infinity not supported". I don't know clauses. Please help me to fix it.
Hi,
I try test with Non Oracle Spatial no problem. But i inserted multiple rows include geometry value, this occurs errors "ORA-32157: Infinity not supported"
According code:
// I has table in Oracle Spatial 10g: PARCEL(ID, NAME, AREA, VARCANT, CREATEDDATE, SHAPE)
//conn is instance of oracle::occi::Connection
// ID: NUMBER(10,0):
// NAME: VARCHAR(255)
//AREA: NUMBER(20,8) // double
//VACANT: VARCHAR(255);
//CREATEDDATE: DATE
// SHAPE: MDSYS.SDO_GEOMETRY
conn ->OCCI_CreateStatement("INSERT INTO PARCEL(ID, NAME, AREA, VACANT, CREATEDDATE, SHAPE) VALUES (:1, :2, :3,:4, :5,:6)");
oracle::occi::Statement* occi_stm=NULL;
occi_stm->setMaxIterations(200);
occi_stm->setMaxParamSize(2,255);
occi_stm->setMaxParamSize(4,255);
int count = 200;
for(int i=0; i< count; i++)
occi_stm->setInt(1, i+1);
occi_stm->setString(2,"PARCEL");
occi_stm->setDouble(3,100);
occi_stm->setString(4,"FALSE");
oracle::occi::Date val(conn ->GetOcciEnvironment(),2008,4,1,12,0,0);
//set date = 01/04/2008 12:00:00
occi_stm->setDate(5,val);
//sdogeom is oracle::occi::PObject*. it stores shape data
cci_stm->setObject(6,sdogeom);
if (i<count-1)
occi_stm->addIteration();
int update_num = occi_stm->executeUpdate();
conn ->OCCI_TerminateStatement(occi_stm);
conn ->OCCI_Commit();
//End code.
Please help me. Thanks. -
BT Infinity Hub and PS3 connection problem.
Hi
I have had my BT Infinity installed today, my laptop, desktop and Iphone have all connected no problem, but my PS3 will not let me connect for some reason? It sees the hub, I enter the key but then it will not find the IP address?
I have done a bit of research and it seems the PS3 doesnt support 802.11N? But others say this shouldnt make a difference as it is backward compatible? Any help or suggestions appreciated.
Thanks
Nick
Solved!
Go to Solution.Hello BT
Me and my family recently got BT infinity on the 9th of january 2012, since we have got this broadband we have been having severe problems like disconnection mostly on my ps3, today i was trying to do an update on Battlefield 3 and the download took almost 7 hours, when we had a talk talk broadband we have not had any download problems it was very fast, today the download took 7 hours like i told you.After it hit 100% it had an error so i had to start the download again when i tried again it said error please check your network settings.
Thank you BT, Please reply to me a suggestion that might help. -
Hello,
For about the past 6 months I keep getting signed out of PSN displaying the error code '8002A548.' This occurs within 20 minutes of signing in. I don't think I have ever been signed into the PSN network for longer than 20 minutes. I have done the following:
1) Restarting router and modem
2) Configured the port forwarding on a dedicated IP address for the PS3
3) Setup a DMZ on my router
All of the above comes without success.
I have contacted FIOS support but they are not much help, they assume restarting the router fixes the issue. I have the Actiontec M1424WR router. Before I used fios I was with Comcast and this never occurred, I really think it's Verizon's router that is the issue itself. Anytime I have contacted tech support they just try to send me another router which ends up being the same result.
Anything advice helps.
Thanks.I have tried the factory reset and it still does not work. Sometimes I am able to log into the router and change the password but the "session expires" and logs me out. Forcing me to log back in again and I am back to square one. These routers Fios gives you are pieces of garbage. I just received a new one and it's the same issue. I would contact their tech support but they are useless. I hate to admit but Comcast is actually looking better than fios.
-
WRT54G2 DNS errors when connecting online to PS3... at a loss for ideas...
Im having dns problems ever since PSN went back online and i cannot connect to the internet with my PS3 or log onto PSN. At first i would get dropped as soon i joined an online game, and it was running very slowly, but now it wont connect at all.
Wired works perfectly. Wireless wont work.
If i use automatic setup then the ip address fails.
If i manually set everything then the ip address passes but the internet connection fails and i get a dns error.
Signal strength is 100% and i have a Linksys WRT54G2 router. (worked perfect 2+ years until this week)
I have Roadrunner cable modem.
I did ipconfig/all and enetered all numbers from there and didnt work.
I used standard dns like google and such and those didnt work.
Im seriously at a loss for ideas. Is my router broken? Please can anyone help?I don't think it's necessarily your router. I've encountered the same problem on my WRT54GC and I used OpenDNS. But it gave me all sorts of problems with different websites so I had to take it out and use manual DNS. I used all sorts of combinations through until I got 4.2.2.2 to work.
EDIT: also, try going in to your router's setup page and click Status. Take note of the DNS values and use those in setting up your PS3. -
I have downloaded infinity blade 3 and then deleted it because i wanted to install some other apps. but now i am trying to install the game again but its saying error 0xE8000004. I have about 6.5 GB space on my iPad. what should i do..
These might help
http://support.apple.com/kb/TS3221
http://support.apple.com/kb/TS3694 -
Can I connect a PS3 wirelessly via the built-in AirPort card using internet sharing from my ethernet-wired iMac? It works for my Nook e-reader, but the PS3 give a DNS error code 8070102, I've tried alternate DNS settings, but no luck.
Can I connect a PS3 wirelessly via the built-in AirPort card using internet sharing from my ethernet-wired iMac? It works for my Nook e-reader, but the PS3 give a DNS error code 8070102, I've tried alternate DNS settings, but no luck.
Maybe you are looking for
-
Red Circle with Red Square ***!?
Someone please give me a short and simple answer to this one...why oh why is it happening and how do i fix it? It seems to be getting worse. I have done a full restore etc.
-
Hi Experts, I have created my own chart of accounts ( not copied from standard INT ). While trying to post MIGO, the following error is getting displayed. 1) Account determination for entry XXXX BSX not possible. when i try to lead through the diagno
-
Actually I want to restore my iphone from my mac but I can't because it says "go to icloud settings on your iphone and turn off find my iphone before restore your iphone". Then, I go to icloud.com and erase find my iphone. But I still can't restore m
-
Mac book aspect ration on Plasma TV
Hi, I've just connected my mac book to my 42" plasma TV. It looks really good and I'm looking forward to watching films on it. However the entire desktop is ever so slightly squashed. I'm running in 1024x768. The TV can display 1280x1024 at the corre
-
Cannot Export JPEG still picture from MPEG
I am trying to use Quicktime Pro 7.1.3 to export a still picture (in JPEG format) from an MPEG video, but this is not working. I followed the directions in the QTPro User Guide: I play and then pause the video once it reaches the desired frame. Then