802.11 Radio Scanning tools

Hi anyome has a link to (possibly) free software for scanning 802.11 radio to check 'security bugs' of wlan ? Better if for Handles PC.
Thanks in advance

Try out Airsnort. It runs on Linux as a free project (GNU I think), and mite have bin ported to Windows.
Check it out here: http://sourceforge.net/projects/airsnort

Similar Messages

WLSE 2.5- Radio Manager Tools- usable in non-LEAP networks?

I'm working with the new WLSE 2.5, and was quite pumped to start playing with all the new tools under the Radio Manager section of the tool. The wind is starting to leave my sails, unfortunately. I'm just getting into this, but it looks like these tools (rogue detection, assisted site surveys, radio scans, interference detection, etc) all require that Wireless Domain Service (WDS) be used in 100% LEAP environment? Asked another way- we are not and will not be a LEAP environment and use no RADIUS servers, can we still benefit from these tools? All literature that I can find so far assumes LEAP is present when using these new tools...

ok, I'm back.
add a radius user account for the wifi equipment, say WifiEquip with a password
on each subnet you need at least one wds defined thus:
--cut and fill in appropriately--
aaa authentication login wlccp_infra group radius
wlccp ap username WifiEquip password 0 {password}
wlccp authentication-server infrastructure wlccp_infra
wlccp authentication-server client any wlccp_infra group radius
wlccp wds priority {priority} interface BVI1
wlccp wnm ip address ip_address_of_wlse2.5
---cut here---
client wds's only need this:
--cut/configure---
wlccp ap username WifiEquip password 0 {password}
wlccp wnm ip address ip_address_of_wlse2.5
--cut/configure---
now, I'll work on getting the radio-scan to work...
hope this makes some sense...
bernie

WLSE Radio Scan Problems

I have recently set up WDS at a remote campus. I scheduled a radio scan for 4:00am so as not to interfere with active users. The scan completed but not successfully. I got an error message regarding the WDS and I can not determine the reason. I have attached the Job Log from the WLSE.
All the AP's are registered with the WDS AP. The WDS AP is dedicated with the radio turned off. The WDS is in an authenticated state with the WNM. I'm not sure what the problem could be.

This has been successfully resolved with the help of TAC. The issue is actually a bug in the ACS v3.3.3. The bug ID is CSCsb47726. Once I applied the patch (replacement of a specific dll) the WDS and ACS and WLSE completely authenticated to one another.

WLSE AP Radio Scan Failure

I finally got the WLSE talking with all of my access points. The WLSE is able to discover all of the access points, so I believe that means that SNMP is working properly.
However, now I'm trying to perform an AP Radio Scan. When I do, I get this error message:
ERROR: AP not SNMP accessible - removing interface xx-xx-xx-xx-xx-xx from AP Radio Scan participation
ERROR: No APs are available to particpate - ending AP Scan.
I get this for all of the access points.
Why would this be happening?

Other possible causes:
- AP not SNMP Reachable from WLSE. To verify, use the SNMP Reachable Test in WLSE Administration screen. If the AP have multiple radio interfaces and if any one of them is down, then this will also cause problems while doing the scan.
- AP do not have the iso view tied to the RW community string.

Problem doing wlse radio scan

Hi,
Just did a radio scan of a building with 18 APs. It all went well but one AP was removed from the scan due to the following error.
ERROR: Measurement Request NAK received - removing interface 00-40-96-a1-0d-7c from AP Radio Scan participation
I've not had any luck finding and explanation for this error....where can I look it up?
....thx....J

Is your WDS properly linked to your WLSE. It should say : "Setting up registry keys" in the wireless services/wds in Wireless Network Manager Information.
I had the same problem also the WNM info then said authenticated. This is a confusing state. I then thought it was Ok....but it was not...
Good luck

Mf 8380cdw scan & tool box 4.9

mf 8380cdw scan & tool box 4.9 will not work with windows 8.1; I have done all I know with drivers, uninstalled and reinstalled, updated etc. With the Tool Box software I have tried troubleshooting and compatibility tests and fixes. It will work for a while and then it won't. Gives a message that an error occured and sending a report to Windows.

Hi Sandra_BCI.
I know that being unable to scan is frustrating and I will be glad to assist you. However, I would like to ask a few questions, if that is okay.
How is the printer connected to the computer? Is it connected directly with a USB cable, with an Ethernet cable to a router, or wirelessly over your network?
How were the drivers and software installed on your computer? Did you use the installation CD-ROM that came with the machine or did you download the drivers from the Canon website?
I look forward to your reply. Should you need immediate assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How do I replace the windows scan tool with the much better ScanGear tool?MX882 on Windows 10 Pro.?

I have a PC on which I instaled the Canon drivers direct from Canon and I like the ScanGear interface a lot. It surved the upgrade from Windows 7 to 10 Professional. On the other hand, for my other PC in the home group, I just let windows install drivers for the MX882. The windows scan interface is so limited! How can I get the ScanGear interface to replace the windows tool?Thanks!B

Scangear is just the scanner driver. Are you talking about the Canon scanning software, MP Navigator EX? That's available to download from the website.

Scanning tool

Someone knows a tool for scanning a report in order to obtain a list of database objects accessed (tables, views, functions, packages)?
If yes, can you give me a link or a reference about it (them)?
Thank you!

As far as I know there is no tool. But here is one idea.
Using rwconverter convert the report to xml (in batch mode, there is no need for GUI. So this can be automated.)
The dtd is available in $OH\reports\dtd\reports.dtd. Using this, you should be able to parse the xml (maybe using standard Java xml parsers) and get the info you need.

Radio buttons + tool tip

is it possible to have a tool tip for a radio button.
when i move over a particular radio button in a group a corresponding tool tip has to be displayed for that particular item.

See
http://htmldb.oracle.com/pls/otn/f?p=24317:91
See a detailed discussion at bubble help
Re: Using toolTip_enable in our applications
In this case, I put the following in Form Element Option Attributes as shown in http://i1.tinypic.com/oa81hz.jpg
Hope this helps.

Network file scanning tool

Hi Team,
we have a requirement to scan whole computers in our network for malicious software. is there any tool which i can use to scan computers remotely for particular software or files?
im willing to purchase if its required.
Thank you,
Chandima.

Hi Chandima,
I'm not quite familiar with System Center but SCCM should provide the function to scan for file. See:
Search for Video, Pics, Music Files on SCCM via Reporting
http://social.technet.microsoft.com/Forums/systemcenter/en-US/a63befd9-4df5-4cf5-9576-68fa3796cc6c/search-for-video-pics-music-files-on-sccm-via-reporting?forum=configmgrinventory
Also if you have antivirus program deployment and the malicious software is considered as a virus/harmful file to antivirus program, you can schedule a scanning to do this job as well.
If you have any feedback on our support, please send to [email protected]

Are there any free WiFi scanning tools for iPad?

such as inSSIDer available.
Thanks

The short answer is, No. iTunes had some Wi-Fi sniffers, but banned them and pulled them from the store before the iPad was released about four years ago. It's a shame really.
I use something simular to inSSIDer on a HP touch pad running Ice Cream Sandwich, very handy. The network tool I use most on iOS is Scanny, which is just a port scanner, great for checking my server for leaks.

Problem with tools staying over scan screen

I am finding that the tools box and tools panels stay on top of the scanning screen when I go to Import from device. This obliterates the scanning tools on the left hand side. It is really annoying and slows down the work so much. I cannot find how to keep them anchored down. Help please. This in only happening on 2 of my 3 computers and I cant see what is different about them.
Many thanks
Val

Hi there.. Thanks very much. I appreciate your help and advice. I have
tried everything and it only works if I redock everything and revert to
tabs etc before scanning. If I have any "floating" docs or palettes they
stay over the scanning interface screen which refuses to come to the top. I
had thought if I clicked on it it would come to the top, but no. This is
such a pain on the Mac as I have got it (and spent a small fortune on new
software) just to be able to work better in Photoshop. I am an illustrator
and only use my own scanned work which I will combine etc so always work
with several screens open and I like to move the palettes around to where I
need them.
Making the scanning interface screen smaller has helped a bit with the
tools but floating working docs still stay on top. I feel I am missing
something because I dont think this can be right? It slows down everything
so much having to re dock everything.
Anyway I much appreciate your time. Am I the only one who is having this
problem?
Val

Stuck interrupt when scanning for wireless networks (Athero chipset)

I'm working on getting wireless running on my Thinkpad T40 with an Atheros AR5211 a/b adapter. The ath5k module loads automatically, and the dmesg output seems to indicate that it is properly detecting the card:
% dmesg|grep ath
[ 4.767272] ath5k 0000:02:02.0: registered as 'phy0'
[ 5.042780] ath: EEPROM regdomain: 0x61
[ 5.042787] ath: EEPROM indicates we should expect a direct regpair map
[ 5.042793] ath: Country alpha2 being used: 00
[ 5.042796] ath: Regpair used: 0x61
[ 5.478542] ath5k: phy0: Atheros AR5211 chip found (MAC: 0x42, PHY: 0x30)
[ 5.478549] ath5k: phy0: RF5111 5GHz radio found (0x17)
[ 5.478553] ath5k: phy0: RF2111 2GHz radio found (0x23)
I brought the interface up using ip:
% ip link show wlan0
4: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
link/ether [redacted] brd ff:ff:ff:ff:ff:ff
The trouble comes when I try to scan for wireless networks. I run "sudo iw dev wlan0 scan". At this point, the system becomes very sluggish, and the load average began to monotonically increase. The scan never completes; I left it for 15-20 minutes and cut it off when the load passed 3.5. The load average did not go down after iw was killed. Checking in top, the CPU was pretty evenly split between a kworker process and ksoftirqd, even with the scan terminated.
I've searched around, and while there are all manner of problems reported with getting various wireless configurations to work, no one seems to get tripped up at the scanning phase like this. Does anyone know of diagnostics I could try (or perhaps other scan tools?) to narrow down what is actually causing the CPU to get hammered?
Last edited by Gavster (2014-01-15 02:57:56)

I got a chance to play around with this a bit more, trying wireless_tools this time:
% sudo iwlist wlan0 scan
wlan0 Failed to read scan data : Resource temporarily unavailable
As before, the load average then continues to increase until the system becomes unusable. This would lead me to believe that I have a driver or kernel issue, since that would be the commonality between the two tools.
The other interesting output is this:
% dmesg|tail
[ 280.973316] ath5k: phy0: too many interrupts, giving up for now
[ 280.989985] ath5k: phy0: too many interrupts, giving up for now
[ 281.004548] ath5k: phy0: too many interrupts, giving up for now
[ 281.019983] ath5k: phy0: too many interrupts, giving up for now
[ 281.034543] ath5k: phy0: too many interrupts, giving up for now
[ 281.049984] ath5k: phy0: too many interrupts, giving up for now
[ 281.064543] ath5k: phy0: too many interrupts, giving up for now
[ 281.079983] ath5k: phy0: too many interrupts, giving up for now
[ 281.094544] ath5k: phy0: too many interrupts, giving up for now
[ 281.109122] ath5k: phy0: too many interrupts, giving up for now
Looking at longer tails, this message repeats many many times, interspersed with:
net_ratelimit: 321 callbacks suppressed
With various values for 321. Some interrupt getting stuck would make sense for why the load average blows up, but I really don't know how to fix that ...
I verified on the ath5k site (http://wireless.kernel.org/en/users/Dri … rted_Chips) that my chip is supported:
% lspci
02:02.0 Ethernet controller: Qualcomm Atheros AR5211 Wireless Network Adapter [AR5001X 802.11ab] (rev 01)
Any tips for what might cause a stuck interrupt like that?

Airport express for isolated network diagnostic tool.

I have many isolated IP networks that I maintain. I am amazed by the network scanning capabilities of my iPhone. I use the various scanning tools when setting up wireless networks. My question is: can I use an Airport Express connected to an isolated network (no internet connection) via an Ethernet cable and connect my iPhone wirelessly to scan the wired network. I have been reading that the Ethernet port is only active when extending an existing wireless network. I would need to be able to set up a static IP address to get it into my network. I'm hoping this would work, much quicker and portable than a bulky laptop and computer bag.

I have been reading that the Ethernet port is only active when extending an existing wireless network.
It would also be active (802.11n AirPort Express only) if the Express is configured as a wireless Ethernet bridge. Apple calls this mode ProxySTA. However, in this mode the Express would not provide a wireless signal.
To get around this, you would need to use a second Express connected to the ProxySTA by Ethernet. This second Express can then broadcast a wireless network for your iPhone to connect to.

Can't scan A4 documents

Hello,
Im using LaserJet Pro 400 MFP M425DN. When im using windows 8.1 scanning and faxing tool to scan a document, there is no A4 format option (297mm x 210mm). B5 is a default option (most of the time its too small). Using HP scanning tool, A4 page is half blank (verticaly).
How can i fix this?
edit: i scan using ADF.

Hello there,
To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums.
Enjoy your day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

802.11 Radio Scanning tools

Similar Messages

Maybe you are looking for