802.11a network not supported for this Country Code
Hi, I get the following error whne enabling 802.11a network on a AIR-WLC2106-K9. Country is set to ID (Indonesia)
>config 802.11a enable network
802.11a network not supported for this Country Code
Yet, on a AIR-CT2504-K9, set to same country code there is no problem.
Is this a WLC model or version issue? WLC2106 is on version 6.0.199.4 while the CT2504 is 7.0.220.0
Andrew
Well is it the only country code selected? Also you might as well upgrade the 2106 to 7.0.x and move off the 6.0.x. Since your 2604 is at that code you might as well upgrade the 2106 and see. I'm guessing that you have the same APs and the APs are for that country.
Sent from Cisco Technical Support iPhone App
Similar Messages
-
The App Store is not supported in this country
Hi, everyone I live in Hong Kong, and I bought my Ipad in US. When I click on the App Store. It said "The App Store is not supported in this country' How can I solve this problem? Thx for help =]
The Apps Store on your iPad will not work until the iPad is officially released in your country. However, you can buy most apps in your computers iTunes software/account. Type iPad in the apps tab search box, choose "show all" in the iPad tab and scroll through the list. You can also visit a site like appshopper.com and review the apps for iPad and choose the ones you would like. Return to iTunes and search for the names of the apps you want. Some of the "Apple" apps and third party apps(i.e. iBooks, ABC Player, etc.) will not be available until release in your country, however, you can download most.
-
Help - 'iTunes Store is not supported in this country'?
First, since I'm new to this, please forgive me it this doesn't belong here.
So, I just got an iTouch today and followed the directions that came with it for setup. But when I attempted to access the iTunes store, I saw the following message:
'Cannot Connect to the iTunes Store
The iTunes Store is not supported in this country.'
I'm very confused by this message, since I live in NYC.
Anyone come across this before? And if so, how did you correct this?
Thanks in advance.Log into your itunes account on your computer. Then sync you ipod. This should set up your itunes account properly on your ipod.
-
After sucessfulling installing the SharePoint Foundation 2013, when i try to access the Secure Stored Service Application i get the below error
11/16/2012 18:13:02.84 w3wp.exe (0x1774) 0x15E8 Secure Store Service
Secure Store g0n6 High The trial period for this product has expired or this feature is not supported in this SKU. b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84 w3wp.exe (0x1774) 0x15E8 SharePoint Foundation
General 8nca Medium Application error when access /_admin/sssvc/ManageSSSvcApplication.aspx, Error=The
trial period for this product has expired or Secure Store Shared Service is not supported for this SKU. at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName, Boolean validateCanary, ExecuteDelegate`1
operation) at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.IsMasterSecretKeyPopulated() at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.SSSAdminHelper.EnsurePrerequisite(SecureStoreServiceApplicationProxy
proxy, String& errorMessage) at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.InitializeGridView() at Microsoft.Office.SharePoi... b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84* w3wp.exe (0x1774) 0x15E8 SharePoint Foundation
General 8nca Medium ...nt.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.OnLoad(EventArgs
e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84 w3wp.exe (0x1774) 0x15E8 SharePoint Foundation
Runtime tkau Unexpected Microsoft.Office.Server.ProductExpiredException: The trial period for this product
has expired or Secure Store Shared Service is not supported for this SKU. at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName, Boolean validateCanary, ExecuteDelegate`1 operation)
at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.IsMasterSecretKeyPopulated() at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.SSSAdminHelper.EnsurePrerequisite(SecureStoreServiceApplicationProxy
proxy, String& errorMessage) at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.InitializeGridView() at Microsoft.Office.SharePoint.ClientExtensions.SecureSto... b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84* w3wp.exe (0x1774) 0x15E8 SharePoint Foundation
Runtime tkau Unexpected ...reAdministration.ManageSSSvcApplication.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84 w3wp.exe (0x1774) 0x15E8 SharePoint Foundation
General ajlz0 High Getting Error Message for Exception System.Web.HttpUnhandledException
(0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Office.Server.ProductExpiredException: The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.
at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName, Boolean validateCanary, ExecuteDelegate`1 operation) at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.IsMasterSecretKeyPopulated()
at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.SSSAdminHelper.EnsurePrerequisite(SecureStoreServiceApplicationProxy proxy, String& errorMessage) at Microsoft.Office.Sha... b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84* w3wp.exe (0x1774) 0x15E8 SharePoint Foundation
General ajlz0 High ...rePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.InitializeGridView()
at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.Htt... b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84* w3wp.exe (0x1774) 0x15E8 SharePoint Foundation
General ajlz0 High ...pApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.86 w3wp.exe (0x1774) 0x15E8 SharePoint Foundation
General aat87 Monitorable b3b6e19b-7de2-e016-ad32-0fc975829ef0
Is it a bug or any issue in configuration?
Raghavendra Shanbhag | Blog: http://moss-solutions.blogspot.com
Please click "Propose As Answer " if a post solves your problem or "Vote As Helpful" if a post has been useful to you.
Disclaimer: This posting is provided "AS IS" with no warranties.Hello
something should be related wuith this service, take a llok at my visual studio output whne I try to deplay and autohosted sharepoint app: (anyone can help)
1>------ Build started: Project: MySharePointAppWeb, Configuration: Debug Any CPU ------
1> MySharePointAppWeb -> C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\bin\MySharePointAppWeb.dll
2>------ Build started: Project: MySharePointApp, Configuration: Debug Any CPU ------
2>C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\Web.Debug.config(34,4): warning : No element in the source document matches '/configuration/connectionStrings'
2> Transformed Web.config using C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\Web.Debug.config into obj\Debug\TransformWebConfig\transformed\Web.config.
2> Auto ConnectionString Transformed obj\Debug\TransformWebConfig\transformed\Web.config into obj\Debug\CSAutoParameterize\transformed\Web.config.
2> Copying all files to temporary location below for package/publish:
2> obj\Debug\Package\PackageTmp.
2> Packaging into C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\obj\WebDeploy\MySharePointApp.Web.zip.
2> Adding sitemanifest (sitemanifest).
2> Adding IIS Application (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
2> Creating application (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
2> Adding virtual path (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
2> Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp).
2> Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin).
2> Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\en).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\en\Microsoft.IdentityModel.resources.dll).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.IdentityModel.dll).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.IdentityModel.Extensions.dll).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.SharePoint.Client.dll).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.SharePoint.Client.Runtime.dll).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\MySharePointAppWeb.dll).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\MySharePointAppWeb.pdb).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\packages.config).
2> Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Pages).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Pages\Default.aspx).
2> Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts\jquery-1.7.1.js).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts\jquery-1.7.1.min.js).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts\_references.js).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Web.config).
2> Adding ACL's for path (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
2> Adding ACL's for path (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
2> Adding declared parameter 'IIS Web Application Name'.
2> Package "MySharePointApp.Web.zip" is successfully created as single file at the following location:
2> file:///C:/_works/visual%20studio%202012/Projects/MySharePointApp/MySharePointApp/obj/WebDeploy
2> To get the instructions on how to deploy the web package please visit the following link:
2> http://go.microsoft.com/fwlink/?LinkId=124618
2> Sample script for deploying this package is generated at the following location:
2> C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\obj\WebDeploy\MySharePointApp.Web.deploy.cmd
2> For this sample script, you can change the deploy parameters by changing the following file:
2> C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\obj\WebDeploy\MySharePointApp.Web.SetParameters.xml
2> Successfully created package at: C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\bin\Debug\app.publish\1.0.0.0\MySharePointApp.app
3>------ Deploy started: Project: MySharePointApp, Configuration: Debug Any CPU ------
3>Active Deployment Configuration: Deploy App for SharePoint
3>Uninstall app for SharePoint:
3> Skipping the uninstall step because the app for SharePoint is not installed on the server.
3>Install app for SharePoint:
3> Uploading the app for SharePoint...
3> Creating a trusted root authority in SharePoint for IIS Express.
3> Installation is in progress (00:00:00)
3> Installation is in progress (00:00:01)
3> Installation is in progress (00:00:02)
3> Installation is in progress (00:00:03)
3> Installation is in progress (00:00:05)
3> Installation is in progress (00:00:06)
3> App failed to install, cleaning up...
3> App installation cleanup failed due to errors. Please see the app on the SharePoint site’s “Site Contents” page for details.
3> App installation encountered the following errors:
3>
3> @"Error 1
3> CorrelationId: ceeeafab-3834-40ea-b360-c29d103e2248
3> ErrorDetail: The remote hosting service is not configured.
3> ErrorType: Configuration
3> ErrorTypeName: Configuration
3> ExceptionMessage: The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.
3> Source: RemoteWebSite
3> SourceName: Remote Web Site Deployment
3>
3> @"Error 2
3> CorrelationId: ceeeafab-3834-40ea-b360-c29d103e2248
3> ErrorDetail: The remote hosting service is not configured.
3> ErrorType: Configuration
3> ErrorTypeName: Configuration
3> ExceptionMessage: The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.
3> Source: RemoteWebSite
3> SourceName: Remote Web Site Deployment
3>Error occurred in deployment step 'Install app for SharePoint': Failed to install app for SharePoint. Please see the output window for details.
========== Build: 2 succeeded, 0 failed, 0 up-to-date, 0 skipped ==========
========== Deploy: 0 succeeded, 1 failed, 0 skipped ========== -
"error: thread-local storage not supported for this target"
I have a program that uses the __thread specifier, to be run on a Solaris 9/UltraSprac.
I am not able to compile it using gcc 3.4.4 or 4.0.4, it emits the msg "error: thread-local storage not supported for this target".
xz@gamera% gcc -v -Wall -D_REENTRANT -c -o func_stack.o func_stack.c
Reading specs from /opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/specs
Configured with: ../srcdir/configure --prefix=/opt/gcc/3.4.4 --disable-nls
Thread model: posix
gcc version 3.4.4
/opt/gcc/3.4.4/libexec/gcc/sparc-sun-solaris2.8/3.4.4/cc1 -quiet -v -D_REENTRANT -DMESS func_stack.c -quiet -dumpbase func_stack.c -mcpu=v7 -auxbase-strip func_stack.o -Wall -version -o /var/tmp//cc0poHSN.s
ignoring nonexistent directory "/usr/local/include"
ignoring nonexistent directory "/opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/../../../../sparc-sun-solaris2.8/include"
#include "..." search starts here:
#include <...> search starts here:
/opt/gcc/3.4.4/include
/opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/include
/usr/include
End of search list.
GNU C version 3.4.4 (sparc-sun-solaris2.8)
compiled by GNU C version 3.4.4.
GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
func_stack.c:16: error: thread-local storage not supported for this target
func_stack.c:17: error: thread-local storage not supported for this target
func_stack.c:19: error: thread-local storage not supported for this target
xs@gamera% gcc -v -D_REENTRANT -c -o func_stack.o func_stack.c
Using built-in specs.
Target: sparc-sun-solaris2.9
Configured with: /net/clpt-v490-0/export/data/bldmstr/20070711_mars_gcc/src/configure --prefix=/usr/sfw --enable-shared --with-system-zlib --enable-checking=release --disable-libmudflap --enable-languages=c,c++ --enable-version-specific-runtime-libs --with-cpu=v9 --with-ld=/usr/ccs/bin/ld --without-gnu-ld
Thread model: posix
gcc version 4.0.4 (gccfss)
/pkg/gcc/4.0.4/bin/../libexec/gcc/sparc-sun-solaris2.9/4.0.4/cc1 -quiet -v -I. -iprefix /pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/ -D__sparcv8 -D_REENTRANT -DMESS func_stack.c -quiet -dumpbase func_stack.c -mcpu=v9 -auxbase-strip func_stack.o -version -m32 -o /tmp/ccjsdswh.s -r /tmp/cc2w4ZRo.ir
ignoring nonexistent directory "/pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/../../../../sparc-sun-solaris2.9/include"
ignoring nonexistent directory "/usr/local/include"
ignoring nonexistent directory "/usr/sfw/lib/gcc/sparc-sun-solaris2.9/4.0.4/include"
ignoring nonexistent directory "/usr/sfw/lib/../sparc-sun-solaris2.9/include"
#include "..." search starts here:
#include <...> search starts here:
/pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/include
/usr/sfw/include
/usr/include
End of search list.
GNU C version 4.0.4 (gccfss) (sparc-sun-solaris2.9)
compiled by GNU C version 4.0.4 (gccfss).
GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
func_stack.c:16: error: thread-local storage not supported for this target
func_stack.c:17: error: thread-local storage not supported for this target
func_stack.c:19: error: thread-local storage not supported for this targetJust as comparison, the corresponding output of compiling another file which does not have __thread declaration is as follows:
xz@gamera% gcc -v -Wall -D_REENTRANT -c -o common.o common.c
Reading specs from /opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/specs
Configured with: ../srcdir/configure --prefix=/opt/gcc/3.4.4 --disable-nls
Thread model: posix
gcc version 3.4.4
/opt/gcc/3.4.4/libexec/gcc/sparc-sun-solaris2.8/3.4.4/cc1 -quiet -v -D_REENTRANT -DMESS common.c -quiet -dumpbase common.c -mcpu=v7 -auxbase-strip common.o -Wall -version -o /var/tmp//cc4VxrLz.s
ignoring nonexistent directory "/usr/local/include"
ignoring nonexistent directory "/opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/../../../../sparc-sun-solaris2.8/include"
#include "..." search starts here:
#include <...> search starts here:
/opt/gcc/3.4.4/include
/opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/include
/usr/include
End of search list.
GNU C version 3.4.4 (sparc-sun-solaris2.8)
compiled by GNU C version 3.4.4.
GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
/usr/ccs/bin/as -V -Qy -s -xarch=v8 -o common.o /var/tmp//cc4VxrLz.s
/usr/ccs/bin/as: Sun WorkShop 6 update 2 Compiler Common 6.2 Solaris_9_CBE 2001/04/02Note that the last 2 lines seem to suggest that a Sun assembler is used as the back-end of gcc. I am not sure whether the failure to compile the first file (with __thread) was due to the incompatibility of this Sun assembler. In the first case, the error msg was emitted before these 2 lines are printed.
I further read a post about gcc 3.3.3's inability to compile code that has __thread in it, on a HP-UX 11.11: http://forums12.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1216595175060+28353475&threadId=1148976 The conclusion seems to suggest that "the 2.17 GNU assembler did not support thread local storage" and gcc sees that and thus disallows TLS.
If the assembler is the culprit, then does anyone know whether this "Sun WorkShop 6 update 2" assembler in my installation can work with TLS? And how come a Sun assembler becomes the back-end of gcc? I read that gas (the GNU assembler) is the default backend of gcc. (How) can one specify the assembler to be used for gcc?
As an aside, I am able to compile my file on this same Solaris 9/UltraSparc platform using the Sun Studio 12 C Compiler:
xz@gamera% cc -V -# -D_REENTRANT -c -o func_stack.o func_stack.c
cc: Sun C 5.9 SunOS_sparc Patch 124867-01 2007/07/12
### Note: NLSPATH = /pkg/SUNWspro/12/prod/bin/../lib/locale/%L/LC_MESSAGES/%N.cat:/pkg/SUNWspro/12/prod/bin/../../lib/locale/%L/LC_MESSAGES/%N.cat
### command line files and options (expanded):
### -c -D_REENTRANT -V func_stack.c -o func_stack.o
/pkg/SUNWspro/12/prod/bin/acomp -xldscope=global -i func_stack.c -y-fbe -y/pkg/SUNWspro/12/prod/bin/fbe -y-xarch=generic -y-xmemalign=8i -y-o -yfunc_stack.o -y-verbose -y-xthreadvar=no%dynamic -y-comdat -xdbggen=no%stabs+dwarf2+usedonly -V -D_REENTRANT -m32 -fparam_ir -Qy -D__SunOS_5_9 -D__SUNPRO_C=0x590 -D__SVR4 -D__sun -D__SunOS -D__unix -D__sparc -D__BUILTIN_VA_ARG_INCR -D__C99FEATURES__ -Xa -D__PRAGMA_REDEFINE_EXTNAME -Dunix -Dsun -Dsparc -D__RESTRICT -xc99=%all,no%lib -D__FLT_EVAL_METHOD__=0 -I/pkg/SUNWspro/12/prod/include/cc "-g/pkg/SUNWspro/12/prod/bin/cc -V -D_REENTRANT -c -o func_stack.o " -fsimple=0 -D__SUN_PREFETCH -destination_ir=yabe
acomp: Sun C 5.9 SunOS_sparc Patch 124867-01 2007/07/12Interestingly, the output no longer mentions the "/usr/ccs/bin/as: Sun WorkShop 6 update 2" assembler.Just as another comparison, I compiled a file without __thread on the Solaris 9/UltraSparc platform using gcc 4.0.4. Not surprisingly it worked. But I no longer see the mention of the Sun assembler as in the case of gcc 3.4.4. Nor did I see the mention of "GNU assembler" as in the case of gcc 4.0.4/Solaris 10/x86. Instead, I saw something called "iropt" and "cg". Does anyone know what they are?
xz@gamera% gcc -v -Wall -D_REENTRANT -c -o common.o common.c
Using built-in specs.
Target: sparc-sun-solaris2.9
Configured with: /net/clpt-v490-0/export/data/bldmstr/20070711_mars_gcc/src/configure --prefix=/usr/sfw --enable-shared --with-system-zlib --enable-checking=release --disable-libmudflap --enable-languages=c,c++ --enable-version-specific-runtime-libs --with-cpu=v9 --with-ld=/usr/ccs/bin/ld --without-gnu-ld
Thread model: posix
gcc version 4.0.4 (gccfss)
/pkg/gcc/4.0.4/bin/../libexec/gcc/sparc-sun-solaris2.9/4.0.4/cc1 -quiet -v -iprefix /pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/ -D__sparcv8 -D_REENTRANT -DMESS common.c -quiet -dumpbase common.c -mcpu=v9 -auxbase-strip common.o -Wall -version -m32 -o /tmp/ccSGJIDD.s -r /tmp/ccKuJz76.ir
ignoring nonexistent directory "/pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/../../../../sparc-sun-solaris2.9/include"
ignoring nonexistent directory "/usr/local/include"
ignoring nonexistent directory "/usr/sfw/lib/gcc/sparc-sun-solaris2.9/4.0.4/include"
ignoring nonexistent directory "/usr/sfw/lib/../sparc-sun-solaris2.9/include"
#include "..." search starts here:
#include <...> search starts here:
/pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/include
/usr/sfw/include
/usr/include
End of search list.
GNU C version 4.0.4 (gccfss) (sparc-sun-solaris2.9)
compiled by GNU C version 4.0.4 (gccfss).
GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
/pkg/gcc/4.0.4/SUNW0scgfss/4.0.4/prod/bin/iropt -F -xarch=v8plus -xchip=generic -O1 -xvector=no -xbuiltin=%none -xcache=generic -Qy -h_gcc -o /tmp/ccUl4mVM.ircg /tmp/ccKuJz76.ir -N/dev/null -is /tmp/ccSGJIDD.s
/pkg/gcc/4.0.4/SUNW0scgfss/4.0.4/prod/bin/cg -Qy -xarch=v8plus -xchip=generic -OO0 -T3 -Qiselect-C0 -Qrm:newregman:coalescing=0 -xcode=abs32 -xcache=generic -xmemalign=8i -il /pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4//gccbuiltins.il -xvector=no -xthreadvar=no%dynamic -xbuiltin=%none -Qassembler-ounrefsym=0 -Qiselect-T0 -Qassembler-I -Qassembler-U -comdat -h_gcc -is /tmp/ccSGJIDD.s -ir /tmp/ccUl4mVM.ircg -oo common.o -
I get the error message in QuickTime "operation stopped the operation is not supported for this media" most times when I try and export an .AVI file as something else (e.g. .m4v). I have not touched the file in any way (no trimming, clipping or other editing), all I want QuickTime to do is export the file in a compressed format. Bizzarely, if I shutdown and open QuickTime many times I can occasionally export a clip as another format (maybe one in 10 times). I have seen that other users have had a similar problem after clipping files in QuickTime but this seems to be a slightly different bug in that all I do is open the file and then try and export the file as is - either way, this is a very annoying bug
@Z_B-B, thank you for taking the time to respond to my cry for help. However, the link you supplied does not address the problem: I am not trying to export from Final Cut Pro to QuickTime, I am trying to export from QuickTime to the rest of the world (like people's iPhones and Ipads) in .m4v format (so I am not emailing my freinds such huge files).
If I were to spend hundreds of Dollars on a copy of Final Pro I could export directly from there and not have to bother with QuickTime, but I do not take enough video clips to justify the cost. I must say that I never had any of these problems before I decided to switch from Snow Leopard to Mountai Lion. -
The requested action is not supported for this object. [message 131-171]
Hi,
One user is having the below error message appear when she attempts to print remittances. This has only started happening since yesterday and all other documents are still printing.
"The requested action is not supported for this object. [message 131-171]"
Any ideas what could be the problem?
Regards,
MohanHi Johnson,
I have not tried your suggestion till now as I am waiting for the database copy from my client.
Just a quick question, As I already mentioned earlier and I also keep getting the issues from the users reporting that the user's get this error only if they print 'remittance advise reports' has multiple invoices.
The report prints fine if it has single invoice even if it is a check payment.
Will your suggestions address this as well?
Regards,
Mohan -
EXP-00105: parameter CONSISTENT is not supported for this user
Hi,
I have use Oracle 10g on unix platform
i have export is taken from following command
exp \'/ as sysdba\' file=t.dmp full=y buffer=10485760 log=0101.log CONSISTENT=y statistics=none
export is sucessfull but one warning
EXP-00105: parameter CONSISTENT is not supported for this user
if i have use without CONSISTENT parameter then export is successfull ,
why EXP-00105 error occured ?As per Oracle Error Notes:
EXP-00105: parameter string is not supported for this user
Cause: The user attempted to specify either CONSISTENT or OBJECT_CONSISTENT when connected as sysdba.
Action: If a consistent export is needed, then connect as another user.
Looks likE the SYS user cannot do a transaction level consistent read (read-only transaction). You could have performed this by SYSTEM user or any DBA priviliged user to to take the complete export of your DB.
Anyway, for more information the error "EXP-00105", please take a look into the same question on another Oracle related forums.
http://www.freelists.org/archives/oracle-l/05-2006/msg00236.html
Regards,
Sabdar Syed. -
Query Problem - Exclude operation is not supported for this characteristic
Hello all
I have a little issue with a report problem i have been given and wondered if anyone had any knowledge of this.
We have a report witn two heriarchy variables for profit centre. One is a authorisation variable and the other a custmer exit.
When we are in the report and try and drag out some profit centres or exclude some) it will not allow it and we get the following message: -
'Exclude operation is not supported for this characteristic'
Does anyone know why this is happening. I
Any ideas?Hi Andrew,
if you have a chance confirm this with SAP Support, but I think excluding hierarchy nodes is not supported. The reason for this is the fact that it is not quite clear what should happen to the hierarchy structure when nodes are excluded. For example, what should happen to the value of the parent? Should it still contain the value of the excluded node under it?! or not?! One might want it one way, others might find the other more convenient.
Hope this helps.
Regards,
Maxim -
Hello,
I am new to NI and to data acuasition cards in general. I am trying to put an application togather that would play large audio file using NI9263.
And i am getting the following error.
DAQmx Error: Non-buffered hardware-timed operations are not supported for this device and Channel Type.
Status Code: -201025
Does my hardware support buffering ?
can i use the EveryNSamplesCallbackAO function ?
Any sample code, will be helpful at this time. Thanks.Hi yma200,
Are you using a USB 9263? If so, this might be of help:
http://digital.ni.com/public.nsf/allkb/EC1968728E660B288625780700570D06?OpenDocument
If it doesn't help, can you please post the code that you have that is causing your error?
Regards,
Bogdan Buricea
Applications Engineer
National Instruments -
CUCM 9.1 in VirtualBox - The hardware you are using is not supported for this product
I'm trying to load CUCM licensed through my work onto an oracle VirtualBox running linux redhat, and its unpacking linux fine onto the vbox, and passes the hardware test on boot but when it goes to load I'm getting the error "The hardware you are using is not supported for this product."
I have dedicated to the VM:
4GB ram
4 CPU's (tried 2 and 4)
80GB Hard Drive
What in the world could be jamming this up? Anyone else ever run this or know what the deal is?
Any input is appreciated, thanks!We only support ESXi
Sent from Cisco Technical Support iPad App -
DMA from host to FPGA target is not supported for this remote system.
I am trying tocommunicate with my FPGA (on the cRIO 9002) from the RTOS. I setup up anOpen the correct VI reference with no error but as soon I try to access thefifo I receive error -63001 and the attached message says:
Error -63001 occurredat Open FPGA VI Reference in target - multi rate - variables - fileIO_old.vi
Possible reason(s):
NI-RIO FPGACommunications Framework: (Hex 0xFFFF09E7) DMA from host to FPGA targetis not supported for this remote system. Use another method for I/O or changethe controller associated with the FPGA target.
What other I/O optionsdo I have to move data asynchronously from the RTOS to the FPGA. I triedcreating memory but it appears that I can not write to the memory from the RTOSside.
We also have a 9012sitting around will using this cRIO instead solve this problem.
I am very very greenwhen it comes to LabView so I apologize if this is an easy question.
Solved!
Go to Solution.As stated in the NI-RIO driver readme,
DMA is not supported from the host to the FPGA on the cRIO-900x series.
The cRIO-901x controller supports DMA transfers from host to FPGA and
FPGA to host while the cRIO-900x series controllers only support FPGA
to host DMA transfers. Therefore, LabVIEW returns an error if you try
to transfer using DMA from the cRIO-900x controller.
The 9012 looks like the ideal solution, you are very lucky to be having extra hardware laying around
Rob K
Measurements Mechanical Engineer (C-Series, USB X-Series)
National Instruments
CompactRIO Developers Guide
CompactRIO Out of the Box Video -
Itunes store not supported in this country
Hi
itunes on my iphone was working fine.
However, today when I try to connect I get the message "the itunes store is not supported in this country".
The problem appears to be intermittent as it works ok again after several attempts (then stops again).
My wifi, mail, safari etc are all ok.
Does anyone else have this problem?
ThanksI have seen that message here in Slovakia, too. The Slovak iTunes store has apps only, no music or video, and it is the only iTunes store I can reach on my iPhone. My computer is a different matter - I can switch back and forth between the US store, where I can get podcasts as well as free apps (I can't buy anything with my Slovak credit card). When I get that message on my phone, I download what I wanted on my computer and then synch it to the phone.
I have only gotten that message since the update to 2.2, so I suspect Apple is up to its regional tricks again. -
My iPhone says "iTunes not supported in this country. I live in the USA. How do I fix this???
Ever since I downloaded the iOS 7, I have not been able to get into the iTunes Store on my phone. I have not tried to on my iPad 2 yet. Every time I go I the iTunes app it says "ITunes not supported in this country." I live in the USA and have never been outside of it with this phone. Please help. I am VERY frustrated.
Are you visiting a different country? Is your credit card or adobe ID registered to a different country?
-
ITunes not supported in this country?
While purchasing music, pop up that ITunes not supported in this country therefore unable to download?
Cbushatz wrote:
While purchasing music, pop up that ITunes not supported in this country therefore unable to download?
The iTunes Stores in some countries do not sell music. You can check your country in this document:
iTunes Store: Which types of items can I buy in my country?
Maybe you are looking for
-
Hello. I'm having a problem signing onto my iPad mini. When I went to sign on yesterday the number pad to sign on moved upward and now it is out of site. Now I can't sign on the only thing that shows is the Apple logo.
-
Smart folder in iphoto to burn folder on desktop
Hi. I set up a smart folder in IPHOTO (collecting all photo's taken on a vacation) and have set up a burn folder on the desktop. I can't figure out how to get the smart folder to the burn folder. It won't move from within Iphoto or via the finder. Is
-
VM Server trying to talk to old manager IP after manager virtualization.
Hi All, I have been trying to virtualize the VM manager and have got myself stuck. Steps I have performed 1. Installed VM Manager in VirtualBox on Windows 7 2. Create iSCSI targets 3. Installed VM Server on physical machine 4. Configured storage 5. C
-
JS CS3 image rotation value not the same in Photoshop
I might be missing something but when I test the following line: app.activeDocument.links[1].parent.rotationAngle; The console returns -20. So if I try and apply this value to a Photoshop script. app.activeDocument.rotateCanvas (-20); The result is t
-
just curious, i know this has probably been asked a million times, but is it possible to use my ipod nano as a flash drive without having to load up itunes on every computer that i connect it to? for instnce rather than carrying around a seperate usb