802.11n enabler not working

I have the 2.16 Intel Duo Mac Book Pro. I researched the forums and, happy, happy, joy, joy, my dream machine should be able to run at the higher standard. I paid my buck 99 to Steve Jobs and Co., downloaded the enabler and I get a message saysing, "Your computer does not meet the hardware requirements for this update."
Any help would be appreciated.

You must have a Core 2 Duo machine in order to activate 802.11n. According to your hardware info you have a Core Duo machine. You would have to replace the Airport card with one used in the Core 2 Duo models in order to use 802.11n. That is why you get the hardware error message.

Similar Messages

  • AirPort Extreme 802.11n* Enabler not working

    Hello, I just installed the Time Capsule software onto my 1st gen MacBook. I saw that it installed the AirPort Extreme 802.11n Enabler, but after looking at the network utility. All that show up is: Wireless Network Adapter (802.11 a/b/g), it does not give the little 'n.' I ran the installer twice, but no joy. Any help would be great!
    Thanks!

    ursina, Welcome to the discussion area!
    Go to the Apple menu and select about this Mac. Does it say "Intel Core Duo" or "Intel Core 2 Duo"?
    Only the Macs with "Intel Core 2 Duo" processors have the 802.11n hardware. If you Mac book has the "Intel Core Duo" processor the enabler is useless.

  • 802.11n enabler not installing on Leopard

    MACBOOK PRO getting error (after re-purchasing the 2 dollar 802.11n enabler) on Leopard
    Tried to install and it tells me cannot install on this hard drive
    Help!!!!!

    If you have Leopard installed, the enabler must be included in the install because I followed the directions listed on that page...
    +Before purchasing the 802.11n Enabler software, please check to make sure that your Mac does not already have the 802.11n enabler already installed.+
    +Open Network Utility (found in the Applications > Utilities folder)+
    +Under the Info Tab, choose Network Interface (en1)+
    +In the section "Model: Wireless Network Adapter," if it says (802.11a/b/g/n), you already have the 802.11n enabler installed. If it says (802.11a/b/g), you do not have the 802.11n enabler installed.+
    I looked and mine says a/b/g/n so its already installed and I didn't download that enabler. You may way want to try uninstalling it. Hope that helps, good luck
    edit: i have leopard installed as well, forgot to mention that.
    Message was edited by: vinyl313

  • Airport Express 802.11n does not support 5 ghz range

    I have a Airport Extreme and a Airport Express both are 802.11n. I have the Airport Extreme setup to 802.11n (5ghz only). The Airport Express 802.11n will not work in the 5ghz range no matter what I do.
    If I change the Extreme to 802.11n (2.4 ghz only), and set the Express to 802.11n 2.4ghz, it works fine.
    Both systems have been upgraded to the 5.3.1 firmware.
    Apple claims the Express works in the 5ghz range. The unit I have does not..so what is the deal?
    Steve

    I finally got this to work at 5ghz.
    BUT,
    The Airport Utility that supports the Express is less then great. There is no manual option to set the Express at 5ghz as a client. I assume that Apple will fix this soon.
    I also had the problem described in several places in this Discussion group, that the Express becomes un-available after changing the config. I finally just restored it to the default, unplugged it and let it sit overnight. Then I reprogrammed it, saved it, verified it works, then let it sit all day with out unplugging it. I then unplugged it and moved it to the location I wanted it at so I could stream music, and it worked fine at 802.11n/5ghz.

  • 802.11n Enabler does not work!

    I have a MacBookPro with Core Duo. I bought an AirportExtreme Basestation and installed the software... it showed me that it also installed the 802.11n Enabler. BUT: when I go to the network utility program and select "en1" it still only shows a/b/g compatibility. I re-installed a few time, but it wouldn't change.
    This, of course, has also the effect that when selecting the 5GHz 802.11n at the basestation, my computer wouldn't find the basestation at all (have to reset it afterwards).

    The 802.11n enabler works in Macs with the Core 2 Duo processors, not the Core Duo. I understand that you can upgrade the wireless card by buying a replacement from Apple.
    There are other threads here that describe doing this.

  • 802.11n Enabler-States I do not meet the h/w req. but I do... Pls look

    Good day.
    My mac book 13" is a core duo, I purchased the 802.11n enabler and now getting an alert stating the computer does not meet the hardware requirements for this update.
    Does anyone know what I'm getting this. based on the spec that apple give on the enabler page this should work.
    Thank you for looking.
    Tom

    auriburu, Welcome to the discussion area!
    Please don't post your email address in a public forum. You never know who is going to pick it up.
    First use KB 301724, How to identify your iMac to identify what type of iMac you are having a problem with.
    Then click on the appropriate icon below to visit the area for that iMac and post your question there.
    iMac (CRT) G3 iMac (Flat Panel) G4 iMac G5 Intel-based iMac Aluminum Intel-based iMac

  • 802.11n* Enabler will not install

    hey guys.
    I have purchased my copy of the 802.11n* Enabler for my 20" iMac Core 2 Duo 2GHz, but I keep getting a message saying "Your computer does not meet the hardware requirements for this update.".
    My iMac meets all of the requirments as far as I know (Leopard 15.5)
    I also tried installing it on my Macbook (Tiger 14.9) but I get the same message.
    any thoughts as to why this is and how I can fix it??
    thanks
    GK

    Airport Extreme refers to my wireless card build it right, and not my router (which is not an airport, but is an "n").
    Apple uses the term "AirPort Extreme" for the built-in wireless on the newer Macs so it tends to get confusing when they use the same term for their base stations. In this case, the "n" enabler is a firmware update to the built-in AirPort Extreme in your iMac. Similarly the "AirPort Extreme Update 2007-002" is a software update for this same built-in device. All firmware updates to the base station itself are done through the AirPort Utility.
    I'm not sure why you are having difficulty updating your iMac as it appears, according to your description, to be eligible. To double-check, that it may already be installed take a look at this Apple article: How to tell if 802.11n-enabling software is installed

  • 802.11n Enabler for MacBook Pro not included

    Apple's page about the Airport Extreme Base Station says, "Most new Mac computers ship with built-in 802.11n wireless support that can be easily enabled with the installation of enabler software included with new AirPort Extreme wireless base station (see sidebar)."
    Yesterday I purchased the Airport Extreme 802.11n WiFi Wireless Base Station (Model MB053ZA/A A1143). I have installed it OK and it is running fine. But I now want to "enable" 802.11n on my MacBook Pro but can not figure out how to do it.
    I have searched everywhere through the box and looked everywhere on the one install disk (disk version 2.1 2Z681-6107-A) but I can not find anything that looks like enabler software for the WiFi network card in my MacBook Pro 2.16 GHz Intel Core Duo. The en1 page in Network Utility shows Model: Wireless Network Adapter (802.11 a/b/g).
    How is the enabler normally shipped in the AirPort Extreme wireless base station package? On a separate disk? On the install disk? As a free download?
    Regards
    Peter

    I have searched everywhere through the box and looked everywhere on the one install disk (disk version 2.1 2Z681-6107-A) but I can not find anything that looks like enabler software for the WiFi network card in my MacBook Pro 2.16 GHz Intel Core Duo.
    There were several MacBook Pro models with 2.16 GHz Intel Core Duo processors. Your computer must be have a Core 2 Duo processor to qualify for the enabler.
    How is the enabler normally shipped in the AirPort Extreme wireless base station package? On a separate disk? On the install disk? As a free download?
    There is only a single installation disk that is provided with the base station. The enabler software is located within the AirPort.mpkg package. There is a download, but it is not free. (ref: AirPort Extreme 802.11n Enabler for Mac)

  • Aiport extrem 802.11n enabler doesn't work

    Hi everybody
    I purchased a belkin N1 Wireless router. This allows the n connection and therefore I also purchased the 802.11n enabler.
    The problem is, that this enabler says that I doesn't have the required hardware.
    I have a MacBook Pro (Intel CoreDuo). What did I wrong?
    Can anybody help me there?
    Thanks in advance
    PS: I also installed AirPort Extreme Update 2007-002

    MacBooks with Core 2 Duo processors are eligible for the 802.11n update, but not the earlier MacBooks with the Core Duo processors.

  • Can't perform 802.11n enabler upgrade on MacBook!

    I wonder if anybody could help?!
    I've just bought the 802.11n enabler software for my 2Ghz MacBook. I have installed all updates suggested by Software Update, and when I run the 802.11n enabler it says that my hardware is not compatible with the upgrade.
    I tried to manually install the 2007-002 and 2007-003 Airport Extreme updates, but when I run these I am not able to use them because it says the hard disc is not a valid volume.
    Is there something I am missing?
    Thanks in advance!

    I think you'll find that your MacBook is not compatible.
    The only hardware that works are Macs that shipped with the 802.11n hardware already installed.
    The compatible hardware were all MacPros and iMacs and laptops with Core 2 Duos. The Core Duo machines were earlier models.

  • 802.11n doesn't work

    Hey,
    I've bought an Time Capsule and I like it, but my 802.11n won't work. My 802.11n laptop always takes 802.11g, even if only n is enabled on the time capsule..
    Does anyone know what the problem is? I have restored the firmware, restored all settings, rebooted it and nothing works. What should I do?
    Denni(s)

    Hello iDenni. Welcome to the Apple Discussions!
    It may be possible that the 802.11n draft implemented on your Dell laptop is not 100% compatible with that of the Time Capsule (TC). Are you able to connect any other 802.11n devices to this TC?

  • Question about 802.11n enabler

    Hey folks. I just purchased the 802.11n enabler, however, i don't see any improvement in terms of speed or connection stablity. I checked network ulity, and it says it's installed, so.. what's the deal?

    You are right. 802.11n works only when there is a network of the devices that support 802.11n, whether they are Macs, PCs, or AppleTV. For the Internet connection in the US, not in South Korea, the speed of 802.11g is more than enough, except that 802.11n has a longer range than 802.11g.
    MBP 15.4" (CD, Week 17, 2GHz, 2GB Samsung RAM, 80GB Seagate HDD)   Mac OS X (10.4.9)  

  • AirPort Extreme 802.11n* Enabler Problems

    I just bought the AirPort Extreme 802.11n* Enabler for my 2 GHz MacBook with and Intel Core 2 Duo processor recently and when I try to install it, it tells me, "Your computer does not meet the hardware requirements for this update." I have installed all of the software updates that are available and it is still not working. Anyone have any ideas?!

    There isn't much you can do... There are ways of taking apart your macbook and replacing the Airport extreme card inside but it probably isn't worth it. I guess thats about it.
    Just next time, make sure you check what hardware you have before buying.

  • 802.11n Enabler Doesn't Want To Install

    I have a new MacBook 2.0 GHz Intel Core 2 Duo and when I downloaded the new Airport Extreme 802.11n Enabler it tells me that my computer doesn't have the correct hardware. I am missing something here? Everything I have read tells me that this should work and this hardware should be built in. Let me know if you have any insights...thanks

    Grahamstine, Welcome to the discussion area!
    Are you certain that your MacBook has the 'Core 2 Duo'? There are 2 different 2 GHz MacBooks. One has a 'Core Duo' processor and the other has a 'Core 2 Duo' processor.
    Go to the Apple menu and select "About this Mac". It will tell you what type of processor your MacBook has.
    If your MacBook does have a 'Core 2 Duo' processor, ensure that you have installed the AirPort Extreme Update 2007-001.

  • 802.11n enabler (AirPort Extreme Update 2007-001/2007-001 update)

    Hi,
    I'm thinking of getting time capsule and then getting the 802.11n enabler.
    On the UK apple store(http://store.apple.com/Apple/WebObjects/ukstore.woa/wa/RSLID?mco=17BDE0AD&fnode= home/shopmac/mac_accessories/airportwireless&nplm=D4141) it states i need the AirPort Extreme Update 2007-001, but I can't find it.
    On the US store (http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?find=en abler) it states i need the AirPort Extreme Update 2007-002 update. I found that one and downloaded it but when trying to install it says "This volume does not meet the requirements for this update".
    What do I need to to get this update??
    Do I already have it??
    Am I even able to get 802.11n??
    Any help will be welcomed
    For clarification these are my specs taken from system profiler.
    Model Name: iMac
    Model Identifier: iMac5,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.16 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache (per processor): 4 MB
    Memory: 2 GB

    So it looks like I can't get 802.11n on my mac then. Oh well, good excuse for a new mac.
    The apple store is quite misleading then it says you need either:
    MacBook Pro with Intel Core 2 Duo
    MacBook with Intel Core 2 Duo
    Mac Pro with AirPort Extreme option
    iMac with Intel Core 2 Duo (except the 17-inch, 1.83GHz iMac)
    I have the latter iMac with Intel Core 2 Duo (2.16Ghz), will probably get time capsule anyway though.

Maybe you are looking for

  • How to change my name on my iCloud email address

    Hi! I need some help I am trying to figure out why whenever I send an email, it has someone else's name on it. So other people think that it is someone else emailing them, I can't find the option to change your name in mail prefrences, it was greyed

  • Logical or physical standby

    Hi, on 10g R2 any way to know if we are in logical or physical standby for DATAGUARD ? Thank you.

  • Having problems with Spot Colour gradients

    Hello All, I have little experience in dealing with spot colours.  I'm trying to blend two spot colours for a print job.  Unfortunately the spot colour gradient (left image) does not blend like the process colour gradient (right image).  Instead they

  • Duplicated tunes with iMatch icon

    On one complete CD and a single, all downloaded from the iTunes store recently, duplicate tunes appeared on my iPhone showing the iTunes Match icon. Obviously, my iPhone is displaying both the cloud instance and the 'resident' instance of the tunes.

  • Crypting url key/value pairs

    on the web i have seen urls like this: http://www.domain.com/shop?xyz=FHS767KJDF789SFhsf679Iizgboo67hoOOUGg688 I think, that's an url where the key/value pairs are cryted, so clear text the url above might look like this: http://www.domain.com/shop?i