802.11n Enabler-States I do not meet the h/w req. but I do... Pls look

Good day.
My mac book 13" is a core duo, I purchased the 802.11n enabler and now getting an alert stating the computer does not meet the hardware requirements for this update.
Does anyone know what I'm getting this. based on the spec that apple give on the enabler page this should work.
Thank you for looking.
Tom

auriburu, Welcome to the discussion area!
Please don't post your email address in a public forum. You never know who is going to pick it up.
First use KB 301724, How to identify your iMac to identify what type of iMac you are having a problem with.
Then click on the appropriate icon below to visit the area for that iMac and post your question there.
iMac (CRT) G3 iMac (Flat Panel) G4 iMac G5 Intel-based iMac Aluminum Intel-based iMac

Similar Messages

802.11n Enabler for MacBook Pro not included

Apple's page about the Airport Extreme Base Station says, "Most new Mac computers ship with built-in 802.11n wireless support that can be easily enabled with the installation of enabler software included with new AirPort Extreme wireless base station (see sidebar)."
Yesterday I purchased the Airport Extreme 802.11n WiFi Wireless Base Station (Model MB053ZA/A A1143). I have installed it OK and it is running fine. But I now want to "enable" 802.11n on my MacBook Pro but can not figure out how to do it.
I have searched everywhere through the box and looked everywhere on the one install disk (disk version 2.1 2Z681-6107-A) but I can not find anything that looks like enabler software for the WiFi network card in my MacBook Pro 2.16 GHz Intel Core Duo. The en1 page in Network Utility shows Model: Wireless Network Adapter (802.11 a/b/g).
How is the enabler normally shipped in the AirPort Extreme wireless base station package? On a separate disk? On the install disk? As a free download?
Regards
Peter

I have searched everywhere through the box and looked everywhere on the one install disk (disk version 2.1 2Z681-6107-A) but I can not find anything that looks like enabler software for the WiFi network card in my MacBook Pro 2.16 GHz Intel Core Duo.
There were several MacBook Pro models with 2.16 GHz Intel Core Duo processors. Your computer must be have a Core 2 Duo processor to qualify for the enabler.
How is the enabler normally shipped in the AirPort Extreme wireless base station package? On a separate disk? On the install disk? As a free download?
There is only a single installation disk that is provided with the base station. The enabler software is located within the AirPort.mpkg package. There is a download, but it is not free. (ref: AirPort Extreme 802.11n Enabler for Mac)

HT2534 'you do not meet the min age req'

How do we get an apple id for my 11 year old when this error message comes up?

Other than clearing all the fields out and typing it all again?
SOunds like a bogus error message!

802.11n* Enabler will not install

hey guys.
I have purchased my copy of the 802.11n* Enabler for my 20" iMac Core 2 Duo 2GHz, but I keep getting a message saying "Your computer does not meet the hardware requirements for this update.".
My iMac meets all of the requirments as far as I know (Leopard 15.5)
I also tried installing it on my Macbook (Tiger 14.9) but I get the same message.
any thoughts as to why this is and how I can fix it??
thanks
GK

Airport Extreme refers to my wireless card build it right, and not my router (which is not an airport, but is an "n").
Apple uses the term "AirPort Extreme" for the built-in wireless on the newer Macs so it tends to get confusing when they use the same term for their base stations. In this case, the "n" enabler is a firmware update to the built-in AirPort Extreme in your iMac. Similarly the "AirPort Extreme Update 2007-002" is a software update for this same built-in device. All firmware updates to the base station itself are done through the AirPort Utility.
I'm not sure why you are having difficulty updating your iMac as it appears, according to your description, to be eligible. To double-check, that it may already be installed take a look at this Apple article: How to tell if 802.11n-enabling software is installed

802.11n enabler not working

I have the 2.16 Intel Duo Mac Book Pro. I researched the forums and, happy, happy, joy, joy, my dream machine should be able to run at the higher standard. I paid my buck 99 to Steve Jobs and Co., downloaded the enabler and I get a message saysing, "Your computer does not meet the hardware requirements for this update."
Any help would be appreciated.

You must have a Core 2 Duo machine in order to activate 802.11n. According to your hardware info you have a Core Duo machine. You would have to replace the Airport card with one used in the Core 2 Duo models in order to use 802.11n. That is why you get the hardware error message.

802.11n Enabler does not work!

I have a MacBookPro with Core Duo. I bought an AirportExtreme Basestation and installed the software... it showed me that it also installed the 802.11n Enabler. BUT: when I go to the network utility program and select "en1" it still only shows a/b/g compatibility. I re-installed a few time, but it wouldn't change.
This, of course, has also the effect that when selecting the 5GHz 802.11n at the basestation, my computer wouldn't find the basestation at all (have to reset it afterwards).

The 802.11n enabler works in Macs with the Core 2 Duo processors, not the Core Duo. I understand that you can upgrade the wireless card by buying a replacement from Apple.
There are other threads here that describe doing this.

802.11n enabler not installing on Leopard

MACBOOK PRO getting error (after re-purchasing the 2 dollar 802.11n enabler) on Leopard
Tried to install and it tells me cannot install on this hard drive
Help!!!!!

If you have Leopard installed, the enabler must be included in the install because I followed the directions listed on that page...
+Before purchasing the 802.11n Enabler software, please check to make sure that your Mac does not already have the 802.11n enabler already installed.+
+Open Network Utility (found in the Applications > Utilities folder)+
+Under the Info Tab, choose Network Interface (en1)+
+In the section "Model: Wireless Network Adapter," if it says (802.11a/b/g/n), you already have the 802.11n enabler installed. If it says (802.11a/b/g), you do not have the 802.11n enabler installed.+
I looked and mine says a/b/g/n so its already installed and I didn't download that enabler. You may way want to try uninstalling it. Hope that helps, good luck
edit: i have leopard installed as well, forgot to mention that.
Message was edited by: vinyl313

AirPort Extreme 802.11n* Enabler not working

Hello, I just installed the Time Capsule software onto my 1st gen MacBook. I saw that it installed the AirPort Extreme 802.11n Enabler, but after looking at the network utility. All that show up is: Wireless Network Adapter (802.11 a/b/g), it does not give the little 'n.' I ran the installer twice, but no joy. Any help would be great!
Thanks!

ursina, Welcome to the discussion area!
Go to the Apple menu and select about this Mac. Does it say "Intel Core Duo" or "Intel Core 2 Duo"?
Only the Macs with "Intel Core 2 Duo" processors have the 802.11n hardware. If you Mac book has the "Intel Core Duo" processor the enabler is useless.

802.11n enabler (AirPort Extreme Update 2007-001/2007-001 update)

Hi,
I'm thinking of getting time capsule and then getting the 802.11n enabler.
On the UK apple store(http://store.apple.com/Apple/WebObjects/ukstore.woa/wa/RSLID?mco=17BDE0AD&fnode= home/shopmac/mac_accessories/airportwireless&nplm=D4141) it states i need the AirPort Extreme Update 2007-001, but I can't find it.
On the US store (http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?find=en abler) it states i need the AirPort Extreme Update 2007-002 update. I found that one and downloaded it but when trying to install it says "This volume does not meet the requirements for this update".
What do I need to to get this update??
Do I already have it??
Am I even able to get 802.11n??
Any help will be welcomed
For clarification these are my specs taken from system profiler.
Model Name: iMac
Model Identifier: iMac5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 4 MB
Memory: 2 GB

So it looks like I can't get 802.11n on my mac then. Oh well, good excuse for a new mac.
The apple store is quite misleading then it says you need either:
MacBook Pro with Intel Core 2 Duo
MacBook with Intel Core 2 Duo
Mac Pro with AirPort Extreme option
iMac with Intel Core 2 Duo (except the 17-inch, 1.83GHz iMac)
I have the latter iMac with Intel Core 2 Duo (2.16Ghz), will probably get time capsule anyway though.

AirPort Extreme 802.11n* Enabler for Mac

I just downloaded the enabler for my 20" iMac and when I try to install it, it states "Your computer does not meet the hardware requirements for this update." It's my understanding that only the 17" iMac and the Mac mini aren't supported. Anyone else experience this?

If you recently got you imac and it's a core 2 duo, check if you already have it installed using this quote form appleinsider.com
The company recommends that customers check to make sure that their Mac does not already have the 802.11n enabler installed before purchasing the software patch. To do so, Intel Mac owners should open the "Network Utility" application (found in the Applications > Utilities folder), choose "Network Interface (en1)" under the "Info" tab, and then inspect the information provided under "Model: Wireless Network Adapter." If it says "(802.11a/b/g/n)," the Mac already has the 802.11n enabler installed. If it says (802.11a/b/g), the Mac does not have the 802.11n enabler installed.

802.11n enabler won't install on 10.5.3

Greetings,
I just did a system re-install (upgraded my HD) today. When I was still running Tiger, I bought and installed the 802.11n enabler. Today, the enabler won't install. I am now running OS 10.5.3. I made sure the appropriate Airport Extreme updates are applied.
The error message I get is "You cannot install AirPort Extreme 802.11n Enabler on this volume. This volume does not meet the requirements for this update."
Any ideas?

Very simple, thanks very much.
A nicer error message could have been "enabler not necessary, 802.1n is functional under Leopard."
Thanks again!

Installing 802.11n enabler?

I have just purchased a new Airport Extreme (802.11n) and installed the Airport Utility included on the accompanying CD. The installation process said it was also installing the 802.11n enabler software. However when I run Network Utility, my network interface is still listed as "Wireless Network Adapter (802.11 a/b/g)".
I noticed that the installer DID install a file called "AirPort Extreme 802.11n Enabler.pkg" on my hard drive. But when I launch this manually I get the error: "Your computer does not meet the hardware requirements for this update".
My machine is a 15" MacBook Pro with a Core Duo 1.83GHz processor. My understanding is that this should be compatible with the "n" enabler (I believe apple's specs say all MacBook Pros are compatible). Why isn't it being enabled correctly? Is it not compatible for some reason?
Any help is appreciated. Thanks!

Hello tizzdogg. Welcome to the Apple Discussions!
Sorry, but your MacBook Pro must have the Intel Core 2 Duo chip to be eligible for the "n" enabler.

AirPort Extreme 802.11n* Enabler

The Apple Store page for this 'Enabler' says it comes included with the latest AEBS. If this is so, how do you access the update to install it on your machines? There seems to be a complete lack of information on this.
Any help greatly appreciated...

I've purchased the update and i am not able to install it. I get as far as to the point where you have to choose the HD where you want to install it in. I get a red exclamation mark saying "You cannot install Airport Extreme 802.11n Enabler on this volume. This volume does not meet the requirements for this update."
I have installed all the software updates and still getting this message....Can anybody help me/tell me what i'm doing wrong?
Thanks for any help!!

AirPort Extreme 802.11n* Enabler Problems

I just bought the AirPort Extreme 802.11n* Enabler for my 2 GHz MacBook with and Intel Core 2 Duo processor recently and when I try to install it, it tells me, "Your computer does not meet the hardware requirements for this update." I have installed all of the software updates that are available and it is still not working. Anyone have any ideas?!

There isn't much you can do... There are ways of taking apart your macbook and replacing the Airport extreme card inside but it probably isn't worth it. I guess thats about it.
Just next time, make sure you check what hardware you have before buying.

Airport Extreme 802.11n Enabler wont install

hi,
i just bought the Airport Extreme 802.11n Enabler for my MacBook Intel Core Duo. when i opened the disk image and tried to install, i got an alert saying my computer does not meet the hardware requirements - even though it is a MacBook Intel Core Duo.
i followed all instructions on the Apple Store page before purchasing, including checking my Network Utility to verify whether i needed the software. currently i only have the 802.11 a/b/g adapter. see:
http://store.apple.com/1-800-MY-APPLE/WebObjects/canadastore.woa/wa/RSLID?mco=B4 8E8262&nplm=D4141ZM%2FA
any suggestions? my MacBook is a week 25 model.
thanks,
gimiwan

Your computer needs to be a Core 2 Duo-based Mac for the enabler to install, as the necessary hardware isn't present on an older processor or a 1.83GHz 17-inch iMac. If your computer supports the enabler, install this software and try installing the enabler again.
(19825)

802.11n Enabler-States I do not meet the h/w req. but I do... Pls look

Similar Messages

Maybe you are looking for