802.11n Enabler won't install

I have a 2-week old MBP Core 2.
When I run the installer I get;
You cannot install...on this volume. This volume does not meet the requirements for this update.
The installer reports 90.5GB Free on my only HD; the software requires 112KB.
Anybody else had this problem, or know where I'm going wrong?
MBP Pro 2.33, 2GB, 160GB HD Mac OS X (10.4.8)

Thanks to all - the 7.4MB Airport Extreme Update did it;
So, why didn't Apple either fold the update into the enabler download, or hire someone that can build an installer that checks and advises on prerequisites? Every other software company, M$ included, seem to have lots of people that can do this
As a recent switcher I'm not impressed with Apple's approach to this update.
A bonus is that the update has fixed a problem I had connecting to my Linksys WRT300N. Before today I had to turn Airport off/on to recover the connection to the router, every 5mins or so.
I'd just add that I've had the WRT300N for about 6mths or so and it's been the single most frustrating piece of kit I've ever used at home or work.

Similar Messages

  • 802.11n enabler won't install on 10.5.3

    Greetings,
    I just did a system re-install (upgraded my HD) today. When I was still running Tiger, I bought and installed the 802.11n enabler. Today, the enabler won't install. I am now running OS 10.5.3. I made sure the appropriate Airport Extreme updates are applied.
    The error message I get is "You cannot install AirPort Extreme 802.11n Enabler on this volume. This volume does not meet the requirements for this update."
    Any ideas?

    Very simple, thanks very much.
    A nicer error message could have been "enabler not necessary, 802.1n is functional under Leopard."
    Thanks again!

  • 802.11n* Enabler will not install

    hey guys.
    I have purchased my copy of the 802.11n* Enabler for my 20" iMac Core 2 Duo 2GHz, but I keep getting a message saying "Your computer does not meet the hardware requirements for this update.".
    My iMac meets all of the requirments as far as I know (Leopard 15.5)
    I also tried installing it on my Macbook (Tiger 14.9) but I get the same message.
    any thoughts as to why this is and how I can fix it??
    thanks
    GK

    Airport Extreme refers to my wireless card build it right, and not my router (which is not an airport, but is an "n").
    Apple uses the term "AirPort Extreme" for the built-in wireless on the newer Macs so it tends to get confusing when they use the same term for their base stations. In this case, the "n" enabler is a firmware update to the built-in AirPort Extreme in your iMac. Similarly the "AirPort Extreme Update 2007-002" is a software update for this same built-in device. All firmware updates to the base station itself are done through the AirPort Utility.
    I'm not sure why you are having difficulty updating your iMac as it appears, according to your description, to be eligible. To double-check, that it may already be installed take a look at this Apple article: How to tell if 802.11n-enabling software is installed

  • New core duo 2.0ghz but 802.11n enabler won't work!!

    Just bought a brand spankin' new MacMini for the living room to use as a Media Center. Have got an Airport Extreme so wanted to upgrade the new mini to 802.11n wireless like my MacBook is.....but it doesn't seem to stick! The install of the Enabler 'seems' like it works but when you check the settings for wireless it just shows a/b/g but no 'n'! Shouldn't this now work with the new mini!??

    I'm upset about this as well, I just got my mini the other day with expectations that I could enable the "n" portion of the airport "extreme" card inside it as well so I could finally make use of the full 5GHz band with my new Airport Extreme router that I got a few weeks ago when my son got his iMac.
    Surely it has to be that it's not installing because it's reporting that this is a "mini" and not the MacBook's or iMac or larger, and not because it had anything to do with the C2D processors which only had a Airport "Express" card in them, which is the difference between them. When I seen that it said Airport Extreme on the box, even though it only said "(802.11 a, b, g)" I, like many are expecting it just needed to be updated with the patch to activate the "n" on it, like the previous generation MacBooks, iMac, etc. The newer generation Mac's all have it already activated and the software patch installed is why they say it on the box.
    Or at least, that was my thinking behind it. Did they rip us all off and only put an Airport "Express" card inside the new "Mini's" and falsely advertise it has an "Extreme" card in it? I haven't payed any attention, as of yet, to know if anyone has dissected one or not and posted pics of it.
    Where is the patch fix to update the new "Mini" to make use of the "n" portion of it? They have been feverishly releasing all sorts of other updates for everything else they released of late, why not the updated driver patch for the "Mini"? Surely all it would need is a check to see which "Mini" it's being installed on to make it activate it, to make sure it's not trying to install on a previous "Mini" but still allow it on the newest ones, especially once you've spent the $179 for the new router that has the patch inside it and it already recognizes 802.11a, it's not like it's a b/g only card.

  • 802.11n enabler doesn't install on C2D

    I've just purchased the 802.11 enabler and doesn't install in a MacBook core 2 duo 15'4"
    well, it's a core 2 duo, it's intel chipset, and it's one of the suitable machines typ for this update, as read in Apple store specs so, What's the matter?
    The full error message is: "This volume does not meet the requirements for this update" when I try to install it in the main HD.
    Need help. Thx a lot.

    ok, I guessed so, but my laptop it's up to date 'cause I usually search for new updates once a week.
    Despite of that, I'll look for new updates on airport hardware and so. If you know the lastest version or patch for it it would be useful to me to know it, so I'll have no doubt about wich one to install.
    Thx again

  • 802.11n enabler not installing on Leopard

    MACBOOK PRO getting error (after re-purchasing the 2 dollar 802.11n enabler) on Leopard
    Tried to install and it tells me cannot install on this hard drive
    Help!!!!!

    If you have Leopard installed, the enabler must be included in the install because I followed the directions listed on that page...
    +Before purchasing the 802.11n Enabler software, please check to make sure that your Mac does not already have the 802.11n enabler already installed.+
    +Open Network Utility (found in the Applications > Utilities folder)+
    +Under the Info Tab, choose Network Interface (en1)+
    +In the section "Model: Wireless Network Adapter," if it says (802.11a/b/g/n), you already have the 802.11n enabler installed. If it says (802.11a/b/g), you do not have the 802.11n enabler installed.+
    I looked and mine says a/b/g/n so its already installed and I didn't download that enabler. You may way want to try uninstalling it. Hope that helps, good luck
    edit: i have leopard installed as well, forgot to mention that.
    Message was edited by: vinyl313

  • 802.11n Enabler Doesn't Want To Install

    I have a new MacBook 2.0 GHz Intel Core 2 Duo and when I downloaded the new Airport Extreme 802.11n Enabler it tells me that my computer doesn't have the correct hardware. I am missing something here? Everything I have read tells me that this should work and this hardware should be built in. Let me know if you have any insights...thanks

    Grahamstine, Welcome to the discussion area!
    Are you certain that your MacBook has the 'Core 2 Duo'? There are 2 different 2 GHz MacBooks. One has a 'Core Duo' processor and the other has a 'Core 2 Duo' processor.
    Go to the Apple menu and select "About this Mac". It will tell you what type of processor your MacBook has.
    If your MacBook does have a 'Core 2 Duo' processor, ensure that you have installed the AirPort Extreme Update 2007-001.

  • Installing 802.11n enabler?

    I have just purchased a new Airport Extreme (802.11n) and installed the Airport Utility included on the accompanying CD. The installation process said it was also installing the 802.11n enabler software. However when I run Network Utility, my network interface is still listed as "Wireless Network Adapter (802.11 a/b/g)".
    I noticed that the installer DID install a file called "AirPort Extreme 802.11n Enabler.pkg" on my hard drive. But when I launch this manually I get the error: "Your computer does not meet the hardware requirements for this update".
    My machine is a 15" MacBook Pro with a Core Duo 1.83GHz processor. My understanding is that this should be compatible with the "n" enabler (I believe apple's specs say all MacBook Pros are compatible). Why isn't it being enabled correctly? Is it not compatible for some reason?
    Any help is appreciated. Thanks!

    Hello tizzdogg. Welcome to the Apple Discussions!
    Sorry, but your MacBook Pro must have the Intel Core 2 Duo chip to be eligible for the "n" enabler.

  • Airport Extreme 802.11n Enabler wont install

    hi,
    i just bought the Airport Extreme 802.11n Enabler for my MacBook Intel Core Duo. when i opened the disk image and tried to install, i got an alert saying my computer does not meet the hardware requirements - even though it is a MacBook Intel Core Duo.
    i followed all instructions on the Apple Store page before purchasing, including checking my Network Utility to verify whether i needed the software. currently i only have the 802.11 a/b/g adapter. see:
    http://store.apple.com/1-800-MY-APPLE/WebObjects/canadastore.woa/wa/RSLID?mco=B4 8E8262&nplm=D4141ZM%2FA
    any suggestions? my MacBook is a week 25 model.
    thanks,
    gimiwan

    Your computer needs to be a Core 2 Duo-based Mac for the enabler to install, as the necessary hardware isn't present on an older processor or a 1.83GHz 17-inch iMac. If your computer supports the enabler, install this software and try installing the enabler again.
    (19825)

  • How to install AirPort Extreme 802.11n Enabler?

    I just bought the Airport Extreme and I have the CD that came with it loaded. I'm installing the package that is on the CD and it reads that the following items are available for installation and one of them is the Airport Extreme 802.11n Enabler. I "continue" and it only allows me to do a basic upgrade. How do I know that the Enabler was correctly installed and I can now access using 802.11n?
    I have a MacBook Pro Core 2 Duo 2.33Ghz

    Steve, fire up your Network Utility. You can find it in your Utilities folder. From the row of tabs across the top of the window select "Info" - the first option on the left. Nxt select the "network interface for information". You'll be wanting "(en1)". At the bottom of the info you'll see an entry for "Model Wireless Network Adapter". In parenthesis under this title will be "802.11" and some letters. If you see a letter "n" then it means the enabler did its thang!
    To actually select how your computer will communicate with that little white box with the green light on the front (um...it is green, isn't it?) then fire up your Airport Utility. Select "Manual" setup. Make sure you have the Airport icon highlighted at the top of the window then select the "Wireless" tab. The "Radio Mode" entry is where you do your bit to select "g", "n" or whatever in 2.4GHz or 5GHz.
    I find it best to do one thing at a time. Slower but at least I can undo the mess easily.
    See also http://discussions.apple.com/thread.jspa?threadID=1126076

  • Airport Icon gone after a failed download of 802.11n, plus it wont install?

    Double post.... Sorry
    Model Name: MacBook
    Model Identifier: MacBook1,1
    Processor Name: Intel Core Duo
    Processor Speed: 2 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache (per processor): 2 MB
    Memory: 2 GB
    Bus Speed: 667 MHz
    Boot ROM Version: MB11.0061.B03
    SMC Version: 1.4f12
    Message was edited by: mattnsonya

    The "n" upgrade only works on the Core 2 Duo models - those had the 802.11n spec cards in them. It won't install on cards that don't support the '.11n spec.
    Right in the description from the Apple Store:
    "These Macs have the 802.11n hardware built-in:
    MacBook Pro with Intel Core 2 Duo
    MacBook with Intel Core 2 Duo
    Mac Pro with AirPort Extreme option
    iMac with Intel Core 2 Duo (except the 17-inch, 1.83GHz iMac)
    Please make sure you have one of these Mac computers before purchasing the 802.11n Enabler software. It is not compatible with other Mac models."
    You can get your Airport icon back through System Preferences/Network/Airport - the checkbox for "Show Airport status in menu bar"
    -Douggo

  • 802.11n Enabler does not work!

    I have a MacBookPro with Core Duo. I bought an AirportExtreme Basestation and installed the software... it showed me that it also installed the 802.11n Enabler. BUT: when I go to the network utility program and select "en1" it still only shows a/b/g compatibility. I re-installed a few time, but it wouldn't change.
    This, of course, has also the effect that when selecting the 5GHz 802.11n at the basestation, my computer wouldn't find the basestation at all (have to reset it afterwards).

    The 802.11n enabler works in Macs with the Core 2 Duo processors, not the Core Duo. I understand that you can upgrade the wireless card by buying a replacement from Apple.
    There are other threads here that describe doing this.

  • 802.11n Enabler for MacBook Pro not included

    Apple's page about the Airport Extreme Base Station says, "Most new Mac computers ship with built-in 802.11n wireless support that can be easily enabled with the installation of enabler software included with new AirPort Extreme wireless base station (see sidebar)."
    Yesterday I purchased the Airport Extreme 802.11n WiFi Wireless Base Station (Model MB053ZA/A A1143). I have installed it OK and it is running fine. But I now want to "enable" 802.11n on my MacBook Pro but can not figure out how to do it.
    I have searched everywhere through the box and looked everywhere on the one install disk (disk version 2.1 2Z681-6107-A) but I can not find anything that looks like enabler software for the WiFi network card in my MacBook Pro 2.16 GHz Intel Core Duo. The en1 page in Network Utility shows Model: Wireless Network Adapter (802.11 a/b/g).
    How is the enabler normally shipped in the AirPort Extreme wireless base station package? On a separate disk? On the install disk? As a free download?
    Regards
    Peter

    I have searched everywhere through the box and looked everywhere on the one install disk (disk version 2.1 2Z681-6107-A) but I can not find anything that looks like enabler software for the WiFi network card in my MacBook Pro 2.16 GHz Intel Core Duo.
    There were several MacBook Pro models with 2.16 GHz Intel Core Duo processors. Your computer must be have a Core 2 Duo processor to qualify for the enabler.
    How is the enabler normally shipped in the AirPort Extreme wireless base station package? On a separate disk? On the install disk? As a free download?
    There is only a single installation disk that is provided with the base station. The enabler software is located within the AirPort.mpkg package. There is a download, but it is not free. (ref: AirPort Extreme 802.11n Enabler for Mac)

  • Aiport extrem 802.11n enabler doesn't work

    Hi everybody
    I purchased a belkin N1 Wireless router. This allows the n connection and therefore I also purchased the 802.11n enabler.
    The problem is, that this enabler says that I doesn't have the required hardware.
    I have a MacBook Pro (Intel CoreDuo). What did I wrong?
    Can anybody help me there?
    Thanks in advance
    PS: I also installed AirPort Extreme Update 2007-002

    MacBooks with Core 2 Duo processors are eligible for the 802.11n update, but not the earlier MacBooks with the Core Duo processors.

  • 802.11n enabler (AirPort Extreme Update 2007-001/2007-001 update)

    Hi,
    I'm thinking of getting time capsule and then getting the 802.11n enabler.
    On the UK apple store(http://store.apple.com/Apple/WebObjects/ukstore.woa/wa/RSLID?mco=17BDE0AD&fnode= home/shopmac/mac_accessories/airportwireless&nplm=D4141) it states i need the AirPort Extreme Update 2007-001, but I can't find it.
    On the US store (http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?find=en abler) it states i need the AirPort Extreme Update 2007-002 update. I found that one and downloaded it but when trying to install it says "This volume does not meet the requirements for this update".
    What do I need to to get this update??
    Do I already have it??
    Am I even able to get 802.11n??
    Any help will be welcomed
    For clarification these are my specs taken from system profiler.
    Model Name: iMac
    Model Identifier: iMac5,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.16 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache (per processor): 4 MB
    Memory: 2 GB

    So it looks like I can't get 802.11n on my mac then. Oh well, good excuse for a new mac.
    The apple store is quite misleading then it says you need either:
    MacBook Pro with Intel Core 2 Duo
    MacBook with Intel Core 2 Duo
    Mac Pro with AirPort Extreme option
    iMac with Intel Core 2 Duo (except the 17-inch, 1.83GHz iMac)
    I have the latter iMac with Intel Core 2 Duo (2.16Ghz), will probably get time capsule anyway though.

Maybe you are looking for