802.11x tab greyed out/inaccessible

So I'm trying to configure access to a network using TTLS, however when I click on the 802.11x tab, it's inaccessible! Nothing happens when I click it, and it becomes greyed out after I click it. I'm worried that I might have to reinstall Leopard, maybe the wireless stack is messed up or something. I've tried Googl'ing this, haven't found a solution yet. I remember at one point it had been working, but it's suddenly become completely unreachable.

Reinstalling the 10.5.6 combo update doesn't take too long to do, is way way faster than an entire reinstall, and might fix this problem.

Similar Messages

Desktop Manager Greyed Out & Inaccessible

This is a new problem with Desktop manager as I previously had access to it. When I plug my Blacbkberry in and start up Desktop Manager, the full BB Desktop Manager window greys out (inaccessible). The title bar is showing as connected, the server staus (at bottom of BB Desktop Manager window) is online, the actuve device is detected and my Blackberry PIN is shown is the connected device. However, since the entire Desktop Manager box is greyed out, I do not have access to any of the buttons, such as synchronize. When the Blackberry is disconnected from my computer, then I can access the buttons (i.e., the greyed out area is normal again). I followed the Blackberry Trouble Shooting guide online for when the synchronize now button is not available, including uninstalling and reinstalling the software and turning off the antivirus software. I also did all updates for Windows. I'm running Windows 98. Any suggestions? What causes this?

I am also experiencing a very similar situation. I have a Rogers 8310 Curve that syncs to my Win XP Pro laptop using CompanionLink to sync to my Goldmine CRM. I have the original Blackberry Desktop Manager Ver 4.2.0.15 installed. Up until this afternoon, the synchronization has worked perfectly ... never a problem.
During a Sync today, I inadvertandantly unplugged my Curve from the USB cable (forgetting that it was in the middle of a sync). When I plugged the Blacbkberry back in and start the Desktop Manager, the full BB Desktop Manager window greys out (inaccessible). This is the exact same thing as described below:
The title bar is showing as connected, the server staus (at bottom of BB Desktop Manager window) is online, the actuve device is detected and my Blackberry PIN is shown is the connected device. However, since the entire Desktop Manager box is greyed out, I do not have access to any of the buttons, such as synchronize. When the Blackberry is disconnected from my computer, then I can access the buttons (i.e., the greyed out area is normal again).
So, before I go on a fishing expeditition, I'd like to confirm the best course of action. I have a couple of questions:
1) Should I uninstall the Desktop Manager as per the recommendation below?
2) Should any other BB components be removed?
3) When reinstalling, should I use Blackberry DM 4.3 again or would this be the time to update the Desktop Manager Software?
4) If I should update the softward, which upgrade version of Desktop Manager can I safely use with this device?
Thanks for your help.
Herb...

Can only open 4 tabs in window. Then + button doesn't work, and New Tab greyed-out in menu.

Running Firefox 7.0.1 on Mac OS X 10.7.1.
Number of tabs that can be opened in a single window is limited. Can't currently open more than four. Clicking the "+" button to the right of open tabs does nothing, and the "New Tab" option in the file menu is greyed out.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Firewall tab greyed out in System Preferences - have I been hacked?

Hi,
I am running 10.4.11. In System Preferences, under Sharing, the Firewall tab is greyed out, suggesting my firewall is not running or has been tampered with.
So I did some poking:
brendan% sudo ipfw show
02000 844220 100107534 allow ip from any to any via lo*
02010 0 0 deny ip from 127.0.0.0/8 to any in
02020 0 0 deny ip from any to 127.0.0.0/8 in
02030 0 0 deny ip from 224.0.0.0/3 to any in
02040 0 0 deny tcp from any to 224.0.0.0/3 in
02050 388115 29754604 allow tcp from any to any out
02060 690200 900600320 allow tcp from any to any established
02065 0 0 allow tcp from any to any frag
02070 0 0 allow tcp from any to any dst-port 123 in
02080 0 0 allow tcp from any to any dst-port 135 in
02090 0 0 allow tcp from any to any dst-port 8135-8137 in
02100 0 0 allow tcp from any to any dst-port 21 in
02110 0 0 allow tcp from any to any dst-port 500 in
12190 0 0 deny log tcp from any to any
20000 0 0 deny log icmp from any to me in icmptypes 8
65535 92033 23684897 allow ip from any to any
Does this look suspicious? I also tried:
brendan% /usr/libexec/FirewallTool
Firewall Tool: Error, sysctlbyname(net.inet.tcp.blackhole): 1
Firewall Tool: Error, sysctlbyname(net.inet.tcp.loginvain): 1
Firewall Tool: Error, sysctlbyname(net.inet.udp.blackhole): 1
Firewall Tool: Error, sysctlbyname(net.inet.udp.loginvain): 1
Firewall Tool: Error, sysctlbyname returned: -1
Firewall Tool: Error opening socket
Firewall Tool: Error 1, Error setting up V4 Firewall!
Firewall Tool: Error opening socket for V6!
Firewall Tool: Error 1, Error setting up V6 Firewall!
Should I be concerned? Am I being paranoid?
If I want to reset and restart my Firewall, how do I do that, if the tab is greyed out in System Preferences?
If I want to load a backup copy of my firewall configuration, what file do I need to copy from my backup disk? There is no /etc/firewall.conf on my system.
Thanks.

As I recall, if you do any sort ipfw stuff in command line under Tiger, that that made Sharing > Firewall gray out. Try doing a sudo ipfw flush then see if that lets you reconfigure from Sys Prefs.
This article discusses Tiger's default firewall settings with web sharing turned on. That will give you a start in seeing what you should have on. This article may help a little, too, if you are running services or have certain softwares doing different things (gaming, etc.)
Hope this helps some; sorry I can't help you more.

For XD01, Sales area data tab greyed out

Hi,
User has XD01,XD02,XD05,XD06,XD07,XD99.when user tries to use XD01 with parameters customer,sales org, dist channel and division when go to customer : sales area data screen,sales area data tab is greyed out.It shouldnot be greyed out.what is the cause of it.user has proper authorization for SD.

Hi,
Try with OBD2 tcode...
Also, make sure that while creating customer, you enter sales org., dis channel, & division....
Regards
Edited by: SAP2020 on Jan 27, 2010 11:08 AM

Artwork tab greyed out for video

I created a movie in iMovie, then clicked File > Share > iTunes to load the movie into iTunes. Within iTunes, the movie appears as a H.264 M4V file. So far, so good.
When I click Option - Get Info within iTunes to edit the tag data, the Artwork tab is greyed out. I can edit all the other tag data, but I cannot add an image in the Artwork tab. Any ideas how to un-grey the Artwork tab?
FYI that I can access the Artwork tab for other movies that I created in iMovie. So it generally works ok, but for some reason it's not working for the movie that I created this week.
I am using OS X Yosemite with the most recent versions of iMovie and iTunes.

I ran the iMovie output file thru Handbrake to produce a new H.264 M4v file, then loaded it into iTunes. I now can edit all the tag data, including artwork, on the new file. Still don't know why the first file did not work, but at least I have a work-around ...

Extensions tab greyed out, yet extension manager indicates the extensions are enabled

Recently downloaded trial version of photoshop cc (wanted my extensions to work before I purchased subscription), I also downloaded extension manager cc.
I installed a particular extension called Kubota Action Dashboard, it is enabled in the extension manager.
For some reason though when I open photoshop cc the extensions tab is greyed out and cannot be clicked on.
Any idea why this is the case? Why is the extension recognised in extension manager but not photoshop itself?
Thank you for any assistance

To answer my own question, it appears to be an issue with the maker of the extension and not with the adobe products.
Just found this. It's probably the same with other extensions too, the developers just have to catch up.
System Requirements
MAC:
Mac OS X 10.5 or higher
Photoshop® CS5, 5.5, 6, and CC (not compatible with CC 2014 at this time)

RSS "Open all in tabs" greyed out.

On RSS feeds "Open all in tabs" seems to ALWAYS be greyed out.
It works fine on other bookmarks, so it is NOT this bug:
https://support.mozilla.org/en-US/questions/950762
I have lived with this bug for a loooong time since an update, I think it was around FF13.
It is greyed out on ALL machines I know of... I have seen the bug on several machines with completely independent bookmarks, seen on multiple windows versions
Tried all tricks and NONE worked. Just tried to start in safe mode (did not help) tried to start in safe mode and reset EVERYTHING - but the bug persists.
Googling the bug gives thousands and thousands of hits, so this is still an existing bug NOT related to add-ons.
The reset saves the bookmarks, so I guess the bug MIGHT be found inside the bookmark-database corrupted at some upgrade.
If this is not a bug, but an intentional removal of a function, then it should be hidden not greyed.

Thanks for the quick response. :)
I added the not too fantastic
OPEN ALL IN TABS 1.0.rev698
that adds the function back in a slightly awkward way.
....But why not keep it as an About:config option?
But even better would be to replace it with "Open all UNREAD in tabs"
:-)

Manage Spaces Tab Greyed Out

I can't access the Manage Spaces tab, it's greyed out. We have opened all the permissions and still can't access the tab. Any suggestions?
Thanks

You must create a user profile with rights in explorer, access the Level Access and create a new profile to explorer, later setting the new profile to user or group.

"inspection lot stock" tab grey out

Dear Gurus,
I am facing subject problem while completing UD. In QA32, i have recorded results, then accepted the lot under "partially rejected" option. I want to post some of the stock qty to UR and rest to Blocked. But as all the fields are grey out, i am not able to do so. I can only clist on "propose" button, by which all the stock can move to UR.Is this an authorsation issue?
Request to guide me.

But as all the fields are grey out, i am not able to do so. I can only clist on "propose" button, by which all the stock can move to UR.Is this an authorsation issue?
I am sure by this action the status of the inspection lot would have become UD SPCO.
The system in not allowing to enter the stock because of the "stock posting praposal "
In QS51--->agsint the UD code partially rejected -->check whether you have made/entered "stock posting praposal "
as "Post to unrestricted.
If yes then remove it.System will allow to post the stock in different pockets................

ITunes Application Tab Greyed Out

i got a new computer with windows 7 64 (my original computer was vista 32) and reinstalled itunes and reconnected my ipod touch. now when i connect my ipod the applications on my ipod are all greyed out and i can't access them. do i need to go on my old computer and move the files over that i had downloaded before before i can sync it? I have the latest ipod touch with updated software.

figured it out

New App store interface tabs greyed out sometimes..

Since the new app store look came out, often I see the tabs but they are unresponsive and I have to close app store and reopen it to be able to click on Updates for instance. Anyone else see this?

I think that it might be related to DNS and having multiple network connections...
I encountered the problem for the first time yesterday on a new 2013 iMac whilst I was having problems with Xcode not being able to connect to a version control server (which has worked fine until yesterday).
The only things that have changed recently are that I have switched off a local DNS server (using OSX server) and that I enabled wifi to perform an air drop.
Yesterday the suggestion to disable/re-enable wifi didn't solve the problem, and today now that the icons are back working again and switching wifi on/off has no effect.

Cmd Tab greying out creative suite User Interface

Sometimes when I switch to a CS4 application using 'cmd Tab' the User Interface, Menu bar, tool palettes etc are a dark gray colour - grayed out and inactive. If I click on them they return to their usual appearance but its really annoying - is this a known issue? is there a fix?
Thanks

>'cmd Tab'
Are you sure you want the Windows forum? 'CMD' is a Mac key.

App Store Tabs greyed out

Since I've updated the MacBook pro 13' late 2011 to Mavericks i can't fully access the Mac App store.
It wil load up but only allow me to use the featured tab, including links to Top Free, Top Paid and Top grossing.
I can alos access the Updates tab but only when going through the Software Update.
This is at work so on a proxyed network, both ports 80 and 443 are open so that shouldn't be a problem.
anyone else having this problem or know how to resolve it?
Thanks,
Paul

I think that it might be related to DNS and having multiple network connections...
I encountered the problem for the first time yesterday on a new 2013 iMac whilst I was having problems with Xcode not being able to connect to a version control server (which has worked fine until yesterday).
The only things that have changed recently are that I have switched off a local DNS server (using OSX server) and that I enabled wifi to perform an air drop.
Yesterday the suggestion to disable/re-enable wifi didn't solve the problem, and today now that the icons are back working again and switching wifi on/off has no effect.

Why can i not open downloads on my galaxy 10.1 (open is greyed out)

I have downloaded several program extensions, like seo quake on my galaxy tab 10.1 and while they appear under my firefox downloads i cannot open them. Firefox has the open tab greyed out only showing the uninstall and go to site option.
Any suggestions would ne appreciated.

-> [[How do I manage downloads?]]
If the Open button is greyed, then maybe its because after the download finished, you changed the file's location (moved the file to some other location) from where it was originally saved at the time you were downloading that file.

802.11x tab greyed out/inaccessible

Similar Messages

Maybe you are looking for