802.1x sharing not working with xbox

i live in a dorm and we have to use the 802.1x protocol to log on the network.
so to play xbox live, i have a usb-ethernet adapter and i am sharing my network connection with the adapter which i then plug into my xbox.
my ip address is lets say 123.456.78.9
so my usb-ethernet is set to
ip: 192.168.1.1
subnet: 255.255.255.0
router: 123.456.78.9
dns: 128.227.47.6, 128.227.47.7
then my xbox is set to
ip: 192.168.1.2
subnet: 255.255.255.0
router: 192.168.1.1
dns: 128.227.47.6, 128.227.47.7
i pass the network test, but fail the internet test. i know there are some issues with sharing 802.1x connections, but can anyone please help??

How did you get yours to connect to the internet? I can get mine to connect to the USB adapter but then I'm having trouble getting the USB connected to the internet. It always says that the "Authentication Server is not responding" I gave the USB these settings:
IP 192.168.1.1
Subnet Mask: 255.255.255.0
Router (left blank)
DNS Server: 128.227.47.6, 128.227.47.7
If I tell it to configure IPv4 using DHCP then it can't find the IP address. But if I give it the IP addess above and then hit connect, it just says "Authenticating" and then it says that the server isn't responding. Any help?

Similar Messages

  • Post Moved Not working with Xbox

    Post moved  http://community.bt.com/t5/Other-BB-Queries/Not-working-with-xbox/td-p/479565
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

    Yea, in my honest opinion the wireless on the HH3 is not the greatest at all, the channel switching for me causes problems which causes my external devices to lose connection for a few seconds at times.
    Is there no way you could just try it? even for long a game or so just to rule out any possibilites? Also, since your at the other end of your house, that is also a problem even when your powerline adaptors.
    If you want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side If the the reply answers your question then please mark as ’Mark as Accepted Solution

  • E3000: uPnP not working with Xbox 360

    Hello all,
    So I just setup my new E3000, upgrading from a WRT54G.  The uPnP worked great on that router and my last three routers before that.  Xbox never required I setup anything -- I can prove this simply by swapping routers and putting one of the old ones in place of the E3000.
    However, the E3000 (Firmware Version: 1.0.02) is not working with uPnP.  Xbox connectivity test comes back and says that my NAT type is "Moderate".  Most stuff works fine, but I'd like to get it all working.  I worked with a Linksys tech who was very helpful and got NAT to "Open" by configuring triggered port forwarding. 
    I am happy to have my issue resolved, but confused why uPnP didn't work?  I mean it was easy for me to configure port forwarding, but for my less technical friends, should I simply not recommend this router because it can't do basic uPnP?
    Is there some other configuration change I made that may have upset the uPnP?
    Thanks!
    -Scott
    Solved!
    Go to Solution.

    In case this helps anyone else:
    For the past few months, I have been using static mapping for XBOX live.  I recently updated the firmware on my router to 1.04 and still was having similar problems with uPnP.  So I continued to use static mappings.  One day my IP for the Xbox changed and I got frustrated.
    I tried one thing before giving up on this router:
    1) Held down the reset button for 30 seconds
    2) While still holding it down, unplugged the router for 30 seconds
    3) While still holding it down, plugged back in and continued holding for 30 seconds
    This does a complete reset of the router.  I then re-ran the Cisco connect software (which was also updated recently).  I reconfigured my router the way I wanted.
    Now, Xbox Live uPnP is working!

  • Screen sharing not working with eMac lab after 3.2 update

    Screen sharing no longer functions after applying the 3.2 update in our eMac labs running 10.4.10 and PPC processors. However, it still functions in our iMac labs running 10.4.10 Intel processors. Before update, I was able to screen share with all the computers in the lab. After the update, I am only able to share with one single computer at a time. Not very useful anymore for teachers to use for demonstrating purposes at our school. It definately had something to do with the update since it was working moments before the update. Please help before I have to call Apple regarding this issue. Again, it only seems to affect screen sharing across PPC eMac computers, not Intel based computers.

    Through much testing at our schools, we determined that the problem lies with the update and the admin machine running ARD. If the admin machine is less than a G5 (doesn't matter if it is intel or PPC), ARD will not screen share with multiple computers (more than 3 machines) at a time. If you have a G5 admin machine, you probably will not experience this problem. Apple has yet to contact our district regarding any options for fixing the problem. We are currently in the process of shuffling computers to make sure there is a G5 admin machine in every lab to run ARD. However, I still think Apple needs to recognize this as a problem with their update. Screen sharing is a great tool for teaching class and it is too bad that with the current 3.2 update, it breaks the ability to use it with "older" G4 macs. Hence, that is why your eMac screen sharing is not working anymore. I can only hope for a prompt update to ARD to remedy this situation.

  • Lumia 920 Internet Sharing not working with Window...

    I am unable to get Internet Sharing to work from a nokia Lumia 920 to Dell XPS running Windows 8 with Intel Centrino Wireless-N 1030. Help !!
    Things I have tried:
    + Checked the phone was actually working with Internet sharing:  Different laptop running Winows XP connected fine, everything worked
    + Checked the Dell XPS could connect to inernet sharing using an HTC One as the hot spot: everything worked fine.
    + Tried turning on FIPS: made no difference:
    + Tried updating/different drivers: made no difference
    + Tried turning of N, and only using g: made no difference
    + Tried different access point settigns on the phone: made no difference
    This is one of those things I expect to just work, like it does when the phoen is used with a different laptop, or when a different phone is used with this laptop.
    I've run out of ideas. Any help appreciated.

    Finally fixed it. First I tried using the latest Intel drivers, but to no avail. So I did a driver rollback, and that seems to be working. Driver version now at 14.2.1.3, Microsoft release.
    So problem is a compaitibility issue with the drivers on the windows laptop.  All I can advise others having similar problems is keep trying different drivers (newest not necessarily the best)

  • Screen Sharing not working with "New" MacBooks

    I have a problem. My friends just got the "New" MacBooks, and I have a white MacBook. I tried Screen Sharing with them, but it just does not work. We get audio for the first few seconds, but we never see the other persons screen. Anyone else have this issue, and if you have a "New" macbook, I would like to see if it would work with yours. My AIM Name for iChat is ckeboss

    Hi,
    This Motorola is a branded Netopia device (Motorola Own them now)
    Default access info is near the top of this page
    Turn the Firewall Off or to Low as Medium an High have things that interfere with iChat. (Make sure the Stateful Packet Inspection is OFF)
    Check all the tabs across the top and the menus down the side of each page to see if it has UPnP (most likely in Local Network but could be anywhere)
    The pics will show you if it is doing DHCP
    The Airport settings are in Airport Utility and on the Internet iCon screen where it says "Share a Public IP" in the bottom drop down.
    7:29 PM Tuesday; July 14, 2009
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • ITunes app file sharing not working with iOS 7.1.1

    After upgrading my iPad 2 to iOS 7.1.1, I can't use the app file sharing in the latest version of iTunes on Windows 7. I first noticed it with the Kindle Reader app but confirmed that it also isn't working with GoodReader, HDExplorer, and Notability. Any ideas?

    It continues to be UNREAL how Apple will release iOS software without testing it.  Yep.  They BROKE WIFI SYNC.  It no longer works on my iPhones or iPads either.  UNREAL!!!!!!

  • Home sharing not working with appleTV after I moved itunes to new computer

    I Bought a new Mac computer and followed the directions to move my iTunes library from my windows PC to my new Mac. Now my home sharing doesn't work with my AppleTV. I get an error that says it cannot connect to iTunes librarY.
    I Have tried reboot both the computer and AppleTV. I have turn on and off home sharing multiple times on both the computer and appletv.

    Hey rjcarter,
    Good job on troubleshooting the issue so far. The next steps would be to check the network and firewall settings as well as resetting the wireless router. Take a look at the article below for more information about troubleshooting Home Sharing.  
    Troubleshooting Home Sharing
    http://support.apple.com/en-us/HT203311
    Regards,
    -Norm G.  

  • Video and Screen Sharing not working with new modem

    I give up. Just replaced my old dead Motorola DSL modem with a new Motorola 2210-02 DSL Modem and now iChat video and screen sharing aren't working. I am running 10.5.7, have an Airport Extreme, and 2 computers with cameras (a G5 with an iSight, a Macbook Pro with built in camera) and both worked fine before the modem switch. iChat works, just not video or screen sharing. I have 3 or so friends that I used to be able to video chat with regularly before the modem swap. Spent 3 hours and $50.00 on Apple support with no results. Also talked with my provider (AT&T/Yahoo) and they were no help. Anyone?

    Hi,
    This Motorola is a branded Netopia device (Motorola Own them now)
    Default access info is near the top of this page
    Turn the Firewall Off or to Low as Medium an High have things that interfere with iChat. (Make sure the Stateful Packet Inspection is OFF)
    Check all the tabs across the top and the menus down the side of each page to see if it has UPnP (most likely in Local Network but could be anywhere)
    The pics will show you if it is doing DHCP
    The Airport settings are in Airport Utility and on the Internet iCon screen where it says "Share a Public IP" in the bottom drop down.
    7:29 PM Tuesday; July 14, 2009
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • Why does home-sharing not work with Windows-PC and iMac?

    Aber mit gleichem Windows-PC und MacBookPro doch? Alles im selben Neztwerk. Der PC erscheint beim iMac einfach nicht unter Freigaben. Der iMac erscheint zwar beim PC unter Freigaben, aber wenn man auf die Mediathek des iMac in der PC-Anzeige klickt, erscheint der bunte Drehball und nach einer Weile ist die Anzeige des iMac in der Rubrik Freigabe beim PC nicht mehr da. Erst nach Neustart des PC erscheint der iMac dort wieder. So nutzt mir das gar nichts. Die Einkäufe werden automatisch auf allen drei Geräten aktualisiert.
    Sämtliche "Hilfen" habe ich durchsucht, aber ohne Erfolg. Es klappt einfach nicht mit der Freigabe.
    Vielleicht ist es ja möglich, eine deutsche Antwort zu bekommen.
    Ich kann mir auch gut vorstellen, dass ein solches Forum in Deutschland gut genutzt würde. Es ist sehr schade, dass es das nicht gibt. Aber vielleicht kommt soetwas ja irgenwann einmal. Jetzt wo auch in Deutschland an jeder Ecke Apple-Produkte zu kaufen sind und keine Exoten mehr darstellen.
    Vielen Dank im voraus.

    First, each Library should have a unique name, not the same name.
    Now, I wrote an extensive how-to in another thread that explains Home Sharing, Library Sharing, how to turn them on and identify them and so on. See if it helps you with your problem.
    https://discussions.apple.com/thread/3461734

  • Home Sharing Not Working With iPhone Over Network

    Hey,
    I'm new to this whole support thing so I'll do my best to explain the issue!
    On both iTunes and my iPhone 4s, I have turned on Home Sharing using the same Apple ID. Both are also connected to the same network which is my home wi-fi. I can't seem to connect no matter how hard I try. music won't stream from my pc to my phone and I can't use the app called Remote, an app that lets me control iTunes. I have even gone as far as to mess with my firewall where I allowed two new rules that had the ports Remote uses.
    If anyone can spread some light on this shinanigan, I will be sooooo happy!
    Thanks in advance!

    ...And that didn't work either.

  • Skype screen sharing not working with skype premiu...

    Hi, I just signed up for the skype premium trial. I got the group video working fine however the screen share option was not available? Any ideas?

    jensenteam wrote:
    Hi, I just signed up for the skype premium trial. I got the group video working fine however the screen share option was not available? Any ideas?
    A new version has just been released September 29th, 2011:
    Please download/install this version from here, when prompted click the open or run button: http://www.skype.com/go/getskype-full-56
    This new version is 5.6.0.105 to check what version you have, using the main Skype client window please do:
    Help -> About Skype
    Release Notes: http://blogs.skype.com/garage/2011/09/skype_56_for_windows_with_improved_screen_sharing_release_note...
    Note: There is also an update release for 5.5 if you want to use it instead 5.5.0.119 released as well, same date.
    More here: http://blogs.skype.com/garage/2011/09/skype_55_for_windows_update_release_notes.html
    About Me You can also use a IP Camera as your camera for Skype video Example Instructions

  • Home sharing not working with iMac

    I have been using my iMac to do home sharing for my media on to my Apple TV, lately it shows but won't allow the apple TV to connect to it.  I have the latest updates on my iMac and Apple TV.  If I turn on homesharing on iTunes on my Windows machine I can access it fine (it is also at the latest version of iTunes).  my windows machine does not have my full iTunes library (nor does it have the space).
    I have tried resetting my Apple TV to factory defaults, and reconfiguring.  I have tried rebuilding my library on my iMac, I have tried logging in and out of Homesharing.  I am completely stuck.
    Has anyone else had this problem?  And if so, how did you recover.  Thanks

    Setting up Home Sharing for Apple TV (2nd generation and 3rd generation) - Apple Support
    Troubleshooting Home Sharing - Apple Support
    TCP and UDP ports and protocols used by Apple TV - Apple Support
    TCP and UDP ports used by Apple software products - Apple Support

  • Apple TV home sharing not working with iTunes 11.2.2

    Home sharing has been turned on on both the apple tv as well as iTunes. I'm trying to access my computer library. I've tried all the methods on the support page. Both iTunes and ATV are up to date.
    All help would be great. Thanks!

    to add, when trying to access computer on ATV, I  get a message saying to turn on home sharing on my itunes

  • Does Home Sharing not work through a network extender?

    Home sharing seems to cut out whenever I get into range of my network extender (Airport Express).
    Here's my setup, it's pretty standard: Cable modem wired to Airport Extreme router, which is connected wirelessly to the MBP with my iTunes hard drive. All of this is in my living room.
    I use the Airport Express to extend my network into the bedrooms.
    Whenever I'm home sharing from my iTunes library on my iPhone, if I walk to my bedroom, it cuts out. It usually crashes the iPod app. If it doesn't completely crash it, I can get it to restart buffering if I walk back to the living room.
    Does Home Sharing not work with wireless extenders? Do I have to change something in the set up?

    However, when a device goes from being attached to one wireless device to another, there is often an interruption as the device must change the radio connection to the network. There is a brief period of no connectivity (a second or two)
    Try starting the share while in your bedroom instead of the living room. I'll bet it works.
    Makes sense - so it's a bug in the iPhone OS, that it's unable to recover from temporary interruptions to wifi connection?
    However, I'm not so sure. Starting the share in the bedroom works as you suggest (since 4.3.2 - didn't under 4.3.1) - but as soon as you go back to the living room and the iPhone connects to a different base station the music stops playing. Note also that the shared library itself ceases to work. So for example you can't be in one room (on the extender) and add the shared library (without actually playing anything yet) then move to another room (on the base station) and play a track from the shared library. It just plays dead and you have to explicitly reload the shared library to get anything to play.
    So is it maybe a bug also with iTunes that it can't keep up with a shared library client moving from one wifi station to another?
    How do you report these things to the people that matter by the way?

Maybe you are looking for

  • How to deploy a single PBL (Build Runtime Library) in 64Bit

    Hello There, I am testing PB15 and create two Project Files within the application. One Projectfile to compile a 32Bit Version and the other one to deploy a 64Bit version in P-Code. We are delivering today Patches in a Patch Library at the top of the

  • ITunes doesn't communicate with Nano

    I have tried forfive days to get my Nano to work... I always get the same error message saying that iTunes cannot comunicate with the iPod and that I have to install it again. I also get an error in the iPod updater. I already tried everything in the

  • Converting to MS Word

    I have a report written up in Pages '08 and am looking to convert it to a file extension compatible with MS Work. I have tried the simple copy+paste method but I have a table which will not copy correctly. Cheers.

  • SAP SRM Contracts Vs SAP CLM Contract

    Hi SAP Gurus, Can you guys please tell me the difference between SAP SRM Contracts and SAP CLM Contracts. In which factors SAP CLM serves better than SAP SRM?? Why SAP CLM came into existence when we have SRM Contracts? What are the draw back and wha

  • Best Browser for older iBook.

    I have an iBook G4(1.2 GHz Pwer PC) with OS X 10.3.9. Currently using Safari 1.3.2 but it crashes quite often for what seems a variety of reasons. What browser would be optimal for this older iBook given my specifications? How would I obtain/download