802.1x support Preboot Execution Environment (PXE)

Hi,
I'd like to know if 802.1x support Preboot Execution Environment (PXE) and how its configured?
Anyone have implemented that?
Thanks
BR

Some info in an FAQ will help:
<http://www.cisco.com/application/pdf/en/us/guest/netsol/ns75/c685/ccmigration_09186a0080259020.pdf>
The Guest-VLAN is an alternative for dealing with this if your machines are not capable of supporting the new EFI from Intel (hence lack of 802.1x for PXE).

Similar Messages

WinPE 5 802.1x Support with SCCM 2012 R2

Please see updated information a few posts down.
I am trying to get 802.1x support working to deploy windows 7-8 machines using MDT2012. I have checked IEEE 802.1x network authenication protocol under features of the deployment share properties. I am trying to follow the guide on the deploymentguys.
I have my files on the boot image and can do a net start dot3svc, we are not using certificates at the moment for our 802.1x so I am skipping that line. doing a netsh lan add profile filename="X:\8021x\ Local Area Connection.xml " interface="Ethernet2"
does work. I am having a problem with the third step when I run the following command netsh lan set eapuserdata filename=x:\8021x\Wired-WinPE-UserData-PEAP-MSChapv2.xml allusers=yes interface="Ethernet2" All i get is error setting
user data for interface ethernet2, the operation is not supported.
How does one get 802.1x working in WinPE 4.0?
Heres the latest updated in this first post so you dont have to scroll way to the bottom to get the latest relevant information:
So here's the current situation and hopefully someone has seen it before.
My boot image has the prestart command set to x:\8021x\configure8021x.cmd. If i make a USB boot media this command will run and work with an 8021x wire plugged in. If I PXE boot with a non8021x
wire plugged in this command will run. If I PXE Boot with an 8021x
wire plugged in it does not run the command. If the boot image gets staged from the windows software center it
also will not run my command.
Does anyone know why the staged boot image and booting from PXE are not running my prestart command? It seems that during PXE and staged boot that the network initializes BEFORE it runs any prestart commands?

Well progress on this issue has been made. So why I was getting the operation not supported is because I was exporting our corporate 8021x LAN profile which gets put in place by group policy, which i assumed would work. So i unjoined the windows
7 machine from the domain and was then able to modify the LAN profile to be what is exactly in the documentation with images.
Then the above command works and I no longer get the operation is not supported and I am able to move on to the next steps which is to create a script file which contains the net start and the netsh commands i was using above to test it. Great!
Now my next issue comes up when the instructions tell me to modify the winpeshl.ini file which it says is located at X:\windows\System32\Winpeshl.ini. So I mount the boot.wim file that I did earlier and I browse to the location in question however
the first thing I notice is that when I open the winpeshl.ini file to go to modify it I expect to see:
[LAUNCHAPPS]
“%SYSTEMDRIVE%\sms\bin\i386\TsBootShell.exe”
Instead what I find is it says:
[LAUNCHAPPS]
%Windir%\system32\netstart.exe, -prompt%SYSTEMDRIVE%\sources\recovery\recenv.exe
So I thought ok I will create a copy of this file and rename it to winpeshl.ini.bak and then modify it to say what It says it should be in the instructions which is:
[LAUNCHAPPS]
winpeinit.exe
%SYSTEMDRIVE%\Windows\System32\wscript.exe, %SYSTEMDRIVE%\8021x\Configure8021xUser.wsf
“%SYSTEMDRIVE%\sms\bin\i386\TsBootShell.exe”
Next I unmount the boot.wim file and overwrite the copy I had. Next I update the distribution points and PXE boot a test machine. What I see next is
what I dont understand. Upon booting and hiting F8 to get to a command line I cd into x:\windows\system32\ and notice that I do indeed still have my winpeshl.ini.bak file so I open the winpeshl.ini file I had thought I modified earlier and low and behold
it contains this which is different when I look at it when I mounted the wim file:
[LAUNCHAPPS]
“%SYSTEMDRIVE%\sms\bin\i386\TsBootShell.exe”
So something is modifying this file and setting it this way effectively overwriting what I put in so that my script can run and configure the 8021x user settings.
Is there some updated documentation somewhere, how do I proceed from here??
The next steps after this would be to modify the unattend.xml file at a certain location to run the Configure8021xUserWindows.wsf script which does the winpe script just instead
of running from X: it runs from C: as it says in the documentation. But I can't move on to test this yet without getting the winpe part working.

No 802.11n support in macbook pro leopard install

I upgraded my MacBook Pro to Leopard last week (and then updated to 1.5.1 yesterday)
Other users here have claimed that they see 802.11n support in the Network utility (choosing en1 as the Network Interface). However, I do not. I only see a/b/g.
I also went ahead and purchased the 802.11n enabler (for $2.16). I got an error message that the software is incompatible with my hardware. My guess is that the enabler is probably incompatible with Leopard - although the Apple Store says nothing about this.
Why did others get 802.11n installed automatically via their Leopard upgrade but in my case it did not?
How do I upgrade my MacBook Pro (10.5.1) to 802.11n?
Thanks,
Bill

I just realized that I don't have the right mbpro for 802.11n as I don't have core 2 duo.
***** to be me I guess.
I'll look for an after market solution to upgrade to 802.11n.
Thanks.

Help Enabling 802.11b Support

Can anyone help? All I want to do is enable 802.11b support on my Cisco 877W. My 802.11g clients can see and attach to it no problems. My 802.11b clients cannot see it at all. I have tried all sorts but nothing has helped. My config looks like this:
interface Dot11Radio0
no ip address
encryption key 1 size 128bit 7 BC48CE99C4E9B683819990D3C1A5 transmit-key
encryption mode wep mandatory
ssid *****
authentication open
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0
48.0 54.0
station-role root
no dot11 extension aironet
bridge-group 1
bridge-group 1 spanning-disabled
What do I need to add to make it visible and available to 802.11b clients?
Many Thanks,
Matt

I'd start by defaulting the AP back to factory default, no WEP, no authentication.
Check to see if the 802.11b clients can connect.
If all the 802.11b clients are running the same software, check to see that they are up-to-date drivers & client software. If you're using the MS client software (Zero Wireless Config) try a client using the vendor's client software instead.
If the clients are not eve associating, look at the basic parameters: things like preamble length (legacy default is "long" which is a one meg data rate)
If you can get the 802.11b client to connect whith all open parameters, then add WEP. Be advised that some clients need the WEP entered as HEX, not ASCII.
For example ASCII "ABCD" would be "41 42 43 44" in hex ... make sure you're using the same system. IF youre using something like "12345abcde" that can be a valid (but incorrect) hex string when ou really intend for it to be ASCII.
Also note that leading or training spaces (ASCII 20) are valid characters. Make sure you do not have leading or training spaces in your WEP (unless you really want them there, in whch case, make sure they're there)
Make sure the Ethernet format is correct: use the Web GUI to set up. Check the parameters on the "Interfaces" page and do not (at least initially) use the "Best throughput" or "Best Range" settings, leave it at "Default Settings"
If your 802.11b clients are PDAs, bar-code scanners, or other hand-held devices, check that they are at default settings for the standard 802.11b protocols; some use proprietary protocols for better performance or security.
That's about it for me ... let us know if any of that changes (works / doesn't work, but acting differently / doesn't work, looks the same).
Good Luck
Scott

Clarification on 802.1x support for 3560

Hi all: have a question on support of 802.1x support in 3560.
This (http://www.cisco.com/en/US/products/hw/switches/ps5528/products_configuration_guide_chapter09186a00801e85c4.html) one talks about 802.1x configuration on a 3560 with 12.1(19)EA1
But this tool http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp tells me that IEEE 802.1x-VLAN Assignment is supported only on ED Releases 12.2(25)SEE1, 12.2(25)SED1, 12.2(25)SEC2, 12.2(25)SEB4, 12.2(25)SEA, 12.2(25)SE for 3560.
Does this mean Cisco is recommending using 12.2.(25) for 802.1x for these switches eventhough 12.1(19) supports it?
Thanks
Ravi

Only the following 3560 are supported in 12.1.19EA1:
Catalyst 3560-24PS
Catalyst 3560-48PS
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3560/12119ea1/ol510401.htm#84866
The rest of 3560 have different minimum IOS requirements:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750/125see1/ol9586.htm#wp84866
So, wht I am trying to say is, the feature, 802.1x-Vlan Assignment is supported in 12.1(19)EA1 but depending on what kind of 3560, it will require a minimum IOS. If your 3560 is either Catalyst 3560-24PS or Catalyst 3560-48PS, you can run 802.1x-Vlan Assignment on it.
Please rate all posts.

Does OWF Support a Cluster environment?????

I have a Cluster environment. I have an IP for Node 1 (xxx.xxx.xxx.001), another IP for Node2 (xxx.xxx.xxx.002), another IP for the Cluster (xxx.xxx.xxx.003) and another IP for the Database (xxx.xxx.xxx.004)
I have installed OWF in both nodes and I created the OWF repository in Oracle (user OWF_MGR). Its right?
Does OWF Support a Cluster environment?????
What do I have to configure if I want High availability for Oracle Workflow????
Thanks in advance!

Hi,
Every servernode runs in its own java process.
Every java process has its own heap where it works in, with normal use its not possible to share memory between servernodes so also not caches that are stored in memory.
The only components that are shared in a Java "cluster" are the SCS instance that contains the Message and Enqueue Server, the DB, and the shared file system /sapmnt.
Try investigating JNI... search for "Java JNI Shared Memory"... this will need custom development and seems to be very low level and complex... If it was easy I guess SAP might had implemented in there WAS Java I gues.
Also take a look at:
http://www.google.nl/url?sa=t&source=web&ct=res&cd=1&url=http%3A%2F%2Figuanaworks.net%2F~shucker%2Fppt%2FJaDiSM.ppt&ei=3OqmSY6pF8Ov-QakpJnGAg&usg=AFQjCNFZCeSE-PIRpVIN39TDtGaeXMAKHA&sig2=mSGrGSf-5hT7roefFDj0lw
and
http://www.google.nl/url?sa=t&source=web&ct=res&cd=2&url=http%3A%2F%2Figuanaworks.net%2F~shucker%2Fpapers%2FJaDiSMPaper.doc&ei=3OqmSY6pF8Ov-QakpJnGAg&usg=AFQjCNF0cozxeRsKdOoHlynHWCdCv1zDmA&sig2=upwiB0HKiyxYJHaCZWiIeg
Good luck!
Benjamin Houttuin

How fast can Broadcom 802.11n support for maximum?

hey everybody,i got U160 yesterday that the WLAN adapter is Broadcom 802.11n but i just got a connection speed of 65Mbps but i can get 150 Mbps with my G230 with intel 5100 bgn ,connecting to the same N-Router,so i am wondering how fast can Broadcom 802.11n support for maximum.......

if readycomm installed, remove it.
check your firewall is active and using high performance.
by the way, which model of broadcom are you using?

Is vmware supported for production environment ?

Hi All,
Is vmware supported for production environment ?
Thanks
Sunny

All,
I'm glad someone has outlined the clear support statement that has existed for sometime between VMware - SAP. For those of you still running on Oracle, here is some good news:
Wording towards SAP Customers requesting support:
"Oracle, VMware and SAP are working collaboratively to ensure support for SAP customers that use VMware virtualization for SAP solutions running Oracle DB. Functional tests are currently being performed to verify supportability of the SAP&Oracle stack. Details will be made available in SAP note 1173954 u201CSupport of Oracle for VMwareu201D after tests have been completed. It is expected that in Q1 2010, ESX 3.5 and later releases including vSphere 4 will be supported by Oracle and SAP according to Oracleu2019s metalink note 249212."
There is no reason why x86 platform today cannot run the most demanding workloads on VMware vSphere in a production environment. But has noted earlier, don't get hung up on "production" - you have heaps of TestDev, SolMan TestDev, sandboxes, gateways, application servers etc that should immediately by put into a VM - once you are comfortable with your solution in-house, I'm sure you will move production instances into a VM as well.
Below are some great resources for you to use in your quest to virtualize SAP on VMware:
Additional Resources
SAP Notes (for Windows platform)
674851: Virtualization on Windows
1104578: Virtualization on Windows: Enhanced Monitoring
1056052: Windows: VMware ESX Server 3.x or vSphere configuration guidelines
1260719: Detailed virtualization data using saposcol
SAP Notes (for Linux platform)
1122388 u2013 Linux: VMware ESX Server 3.x or vSphere configuration guidelines
1122387 u2013 Linux: Supported Virtualization technologies with SAP
171356 u2013 Virtualization on Linux: Essential information
SAP, VMware (and other) benchmarks
http://www.sap.com/solutions/benchmark/sd2tier.epx
Introductory document u201CVirtualizing SAP applications on Windowsu201D by SAP
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70f63258-bff1-2a10-9db6-
cda6ef202bfc
VMware and SAP
White Papers, Success Stories, Webinars, Links, etc.
http://www.vmware.com/sap
SAP VMware Blog
http://communities.vmware.com/blogs/SAPsolutions
Regards,
Andre Kemp
VMware Sr. Product Marketing Manager - Asia Pacific
Certified mySAP 2K and Migration Consultant
Edited by: Andre Kemp on Dec 10, 2009 9:00 AM

Oracle support of mixed environment

Does anyone know (or where to find out) if Oracle officially supports a mixed environment? We are running Oracle database on Linux and the EBS Apps tier on Microsoft Windows.
Oracle Applications 11i (11.5.10.2) / Database 10g (10.2.0.3 64-bit Linux)
Sun JRE (Native Plug-in 1.6.0_15)

Does anyone know (or where to find out) if Oracle officially supports a mixed environment? We are running Oracle database on Linux and the EBS Apps tier on Microsoft Windows.
Oracle Applications 11i (11.5.10.2) / Database 10g (10.2.0.3 64-bit Linux)
Sun JRE (Native Plug-in 1.6.0_15)It is supported by Oracle -- It is called "Split Configuration Database Tier".
You can find all the docs in (Frequently Asked Questions: Oracle E-Business Suite Support on x86-64 [ID 343917.1]), under "Oracle E-Business Suite 11i" section.
Thanks,
Hussein

Can't connect to Time Capsule + no 802.11n support

I just got my new 13" MacBook (late 2008). Originally, I thought I couldn't connect to my wireless N router which happens to be Apple Time Machine. According to network utility program, my MacBook only supports a/b/g - this is not right! Now, I discover that in addition to the N problem I can't even connect to my Time Capsule wirelessly! Good thing I have 2 separate wireless routers (linksys).
My other Macs (white MacBook and 20" iMac) have no problem connecting to Time Capsule over 802.11n. Both machine indicates 802.11n support under network utility program.
Compound this problem with stuck 'a' key on my keyboard.
I really, don't get this problem. I spent an hour with Apple tech with no avail. I am thinking about returning this new MacBook.

I have the exact same problem you have described. Unable to find a solution. Odd because I have a 2007 MacBook Pro and it works fine wirelessly. Wireless-N on the MacBook works fine and it can connect to other wireless networks, just not it's home one.
If anybody is interested, here's a dump from the console log when airport attempts to connect. Our wireless station doesn't broadcast.
Macintosh-6 airportd[6001]: Could not find any preferred networks; trying broadcast requests..
Macintosh-6 airportd[6001]: Broadcast requests also failed..
Macintosh-6 airportd[6001]: Probing highest ranked networks via directed scan..
Macintosh-6 kernel[0]: AirPort: Link Up on en1
Macintosh-6 kernel[0]: AirPort: Link Down on en1
Macintosh-6 airportd[6001]: Error: Apple80211Associate() failed -25
Macintosh-6 mDNSResponder[20]: setsockopt - IPMULTICASTIF error 169.254.141.134 -1 errno 49 (Can't assign requested address)
Macintosh-6 configd[14]: rtmsg: error writing to routing socket

Create a simple Execution Environment

Hi,
Here a new guide to create your own a simple Execution Environment.
https://wiki.eclipse.org/LDT/User_Area/Tutorial/Create_a_simple_Execution_Environment
Feel free to ask you question or discuss the topic here
Marc

Hi Samuel,
Please check that your EE is a valid ZIP archive, containing a the root level a ".rockspec" file.
Otherwise, is there a way for me to have look to your EE ? Maybe you uploaded it on github ?
Marc

Extreme 802.11n support for POE 802.3af?

Can anyone confirm if the new (current) generation Airport Extreme 802.11n supports PoE installation? There was a special -- also called education -- version of the previous generation Extreme based station for POE installation.
thanks.
* Nevermind, found previous posts!

jheiliger, Welcome to the discussion area!
The new square 802.11b/g/n AirPort Extreme base station (AEBS) apparently does NOT support POE (Power over Ethernet).

Cad ver 8 NIC test for 802.1q support

Hi Pros,
UCCX SRND ver 8 mentions that "appendix C on Cisco CAD Installation Guide" describes a way to test whether a computer NIC supports 802.1q for monitoring and recording services.
Couldnt find appendix C on the guide
Anyone knows about where I can find this info or way to test the 802.1q support?
Regards,
Pratik

Hi Pratik,
IP Communicator (in SCCP) is indeed supported as one of the monitoring devices, this is listed in the Hardware/Software compatiblity matrix for UCCX. (http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crscomtx.pdf)
As your CIPC will be installed on the same PC as the CAD, the RTP packets will be received on this PC and CAD will be able to access them.
Regards,
Angelique

Support Packages Execution consuming too long time to get complete

Hi,
I installed the SAP Solution Manager 4.0 SR1, I have downloaded the support package stack till june 2007, and applied it. while importing I faced one error XPRA_EXECUTION, Resolved it (by refering sap note:979594) and again click on import. Now it is post 2 and the half day, the execution is still under process. Displaying status as "tp buffer prepared OK". Can anyone tell me how much time it will take to complete.

I have found these errors in tp log can any tell me the solution
WARNING: /usr/sap/trans/tmp/N110531.PRO : cant open
WARNING: : cant open
WARNING: /usr/sap/trans/tmp/N110531.PRO : cant open
WARNING: : cant open
STOP tp_getprots PRO Y 20110531061009
WARNING: /usr/sap/trans/tmp/N110531.PRO : cant open
WARNING: /usr/sap/trans/tmp/N110530.PRO : cant open
WARNING: : cant open
WARNING: : cant open
unable to open the open the files...???

Why doesn't the AEBS 802.11n support NTFS?

I am wondering why users need to go through hoops to make the $200 AEBS 802.11n recognize NTFS formatted disks. Is it really that complicated for Apple engineers to add this support? Is there any way to reach Apple tech and request this? Or is asking for NTFS support utterly ludicrous and fundamentally not feasible. If it is futile to hope for Apple to add support for NTFS to the AEBS 802.11n, then how does one go about returning - who to contact to return and get the money refunded.

Hello durlov. Welcome to the Apple Discussions!
... how does one go about returning - who to contact to return and get the money refunded.
Here is Apple's Return and Refund Policy.

802.1x support Preboot Execution Environment (PXE)

Similar Messages

Maybe you are looking for