805a01f4 error with updating nokia drive

Hello, I have bought a new windows 8 phone from Nokia. Every feature which is default with the phone is great and I have no issues with any of them. But when am trying to open the Windows Store to update Nokia drive, am getting the error code with the message "Error Code : 805a01f4 The Store is not available at the moment please try again." I tried to open it many times but all the time I get the same message. I havn't had any problems with every other application update, only with Nokia drive.
If the microsoft has provided any fix in advance for this error, please let me know about it completely. Thank you.

That's nor the issue neither the point: It's just the Drive+-app which is causing trouble to update; the other Apps & the store in general are working just fine.
The point is that Nokia is making big fame on their website by stating that the Drive+-app is a major improvement over other smartphones as they off a complete SatNav-solution for free.
Customers like me who have fallen for this, are being cheated, because in the end the App doesn't deliver & can't be updated.
The errorcode doesn't seem to have anything to do with the store, just with the availability of the update. Strange however that we are been presented with the same 'general' error.
Patience? When I just bought a brandnew car, I guess it won't be considered normal to return to the dealer with complains about the functionality of the steering wheel, & just get the answer: "Yeah, we know, have some patience, we will fix it in the near future. Perhaps...".

Similar Messages

Error with update my windows phone 801883f error couldn't be installed

Dear Sir,
Plz Solve this Issue ASAP
error with update my windows phone 801883f error couldn't be installed
therefore, i can't update my windows phone
Salim

Hi,
This error code means that the specified path couldn't be found.
To fix this issue, I suggest we try following steps and try to reinstall again:
Step 1: Clean update temp files:
1. Press Windows key + R, type service.msc and press enter.
2. Stop Windows update service.
3. Run following command lines one by one to clear update temp files:
cd %windir%
ren SoftwareDistribution SDTemp
exit
4. Restart Windows update service.
Step 2: Clear windows store catch:
Press the Windows + R keys on your keyboard to open the Run dialog.
Type WSReset.exe, and click/tap on OK.
The Store will now open, and state the following: The cache for the store was cleared. You can now browse the store for apps
Then, please try to update Windows 8.1 again.
Regards,
Kate Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

ORA-24816 error with oracle 10 driver

Friends,
I am getting the following error with Oracle 10 driver while trying to insert data > 4k into a LONG column. The table also contains another column of type varchar2(4000). The code works perfectly fine with Oracle 9i driver.
ORA-24816: Expanded non LONG bind data supplied after actual LONG or LOB column
Kindly let me know if this is a programming error or a driver problem.
Thanks,
Vinay

this driver you mentioned, is it the jdbc driver?
ORA-24816:     Expanded non LONG bind data supplied after actual LONG or LOB column
Cause:     A Bind value of length potentially > 4000 bytes follows binding for LOB or LONG.
Action:     Re-order the binds so that the LONG bind or LOB binds are all at the end of the bind list.
using this forum may be more efficient -> http://forums.oracle.com/forums/forum.jspa?forumID=99&start=0

Y510p and problem with Update Nvidia Driver

Hi everyonei have problem with updating my y510p lenovo laptop nvidia driver ,my current nvidia driver version is 327.62 which i download from lenovo website,Now for better performance in new games like gta v and witcher3 ,i decide to updating nvidia driver,first remove my nvidia graphic driver from add or remove then download nvidia ver 350 from nvidia official web site , which nvidia website confirm it support my graphic card which is Gt755m , then i install new ver and during install i check clean install , after successful install , restart laptop , then there was problem . when i try to open nvidia control panel it wont running and an error showed up and said "You are not currently using a display attached to an NVIDIA GPU" .i try to open a game , game running in really low fps and i find out game run on hd graphic of my laptop and my nvidia graphic wont run .The only way to repair was i install my last nvidia driver 327.62 and run a system restore .guys what is your suggestion and how i can update my y510p nvidia driver ?Thanks

Hi Y510Man,
     The video graphics installation order is important. You need to install the Intel Graphics first, and then do the Nvidia. IIRC you should un-install the Nvidia driver, then re-install (or upgrade) the Intel HD Graphics driver. Reboot, and install the new Nvidia driver.
     I don't know why, but every time I upgraded my Y470 Nvidia driver, I had to use this procedure. First install, or re-install, the Intel driver, then install the Nvidia. You can't just upgrade the Nvidia driver without a re-install of the Intel. I think it has to do with the Optimus setting, and the automatic switching.
    Let us know how it goes.
Cheers
DragonRider

Petstore throws populateServlet error with Oracle thin driver

When i point connection pool to Oracle database, i get the following error. The
data is populated in the database, looks like when petstore is enumerating db
tables and make sure all tables exist, this error is happening. Some how, database
metadata coming as NULL. Has anybody tried petstore with Oracle JDBC driver?
thanks,
PopulateServlet Error:
java.lang.NullPointerException java.lang.NullPointerException at com.sun.j2ee.blueprints.tools.populate.web.PopulateServlet.checkTables(PopulateServlet.java:276)
at com.sun.j2ee.blueprints.tools.populate.web.PopulateServlet.doGet(PopulateServlet.java:127)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2456)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2039)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

I believe that you do not have weblogicaux.jar in your classpath.
-Selvan
Laurie Cohen wrote:
Im using Solaris 2.7 with WLS 5.1.0 and Commerce Server 2.0.1 with
current service packs on both. JDK 1.2.1_04 and the Oracle thin driver
(classes111.zip which I am told is the only one supported in this
configuration). Has anyone seen this problem? Is it that the driver is
using 1.1 and I only have 1.2 installed?
devapp01% java -classpath
/usr/local/weblogic/classes:/usr/local/weblogic/license utils.t3dbping
t3://localhost:7601 username password "" oracle.jdbc.driver.OracleDriver
jdbc:oracle:thin:@10.200.201.110:1521:q01c
Connecting to WebLogic with the WebLogic JDBC Driver
Exception in thread "main" java.lang.NoClassDefFoundError:
com/sun/java/util/collections/ArrayList
at weblogic.kernel.Kernel.declareProperties(Kernel.java:253)
at weblogic.kernel.Kernel.ensureInitialized(Kernel.java:107)
at weblogic.common.T3Client.<init>(T3Client.java:218)
at weblogic.common.T3Client.<init>(T3Client.java:269)
at weblogic.common.T3Client.<init>(T3Client.java:323)
at weblogic.jdbcbase.t3.Driver.connect(Driver.java:121)
at java.sql.DriverManager.getConnection(Compiled Code)
at java.sql.DriverManager.getConnection(DriverManager.java:106)
at utils.t3dbping.main(t3dbping.java:115)
Thanks,
Laurie

TM errors with WD Passport drive.

Hi,
I've been using a Western Digital 320Gb Passport drive as my Time Machine drive. Lately I have been getting either a 'device removed' type error after starting TM, or TM seems to get 'stuck' at the 'preparing backup' stage of a back up. There is ~228Gb available on the drive and I am using a macbook with OS 10.5.8. Is there a general issue with WD Passport drives and TM? If not, what troubleshooting steps are recommended?
Thanks.

I purchased a 500GB USB/Firewire passport drive and couldn't get it to copy a full folder of documents. It kept hanging. I went to their site and found out they have drivers that have to be installed for the drives to work properly. While it did get rid of the problem and made the drive really fast, that means you can't use the drive on a computer that doesn't have the drivers installed. Bummer!
http://support.wdc.com/product/download.asp?groupid=205&sid=61&lang=en

3F0 Error with Good Hard Drive

OK I just got a No Boot Device Found(3F0) With a hard drive I know works. I was working on a friends computers and switched the hard drives to see if that was their issue which it was. My hard drive booted up fine in their computer. When I put it back in my computer i got a the error from above, and when I put it back in the other computer it still works fine. I did a system restore to yesterday incase there were drivers that were messing things up but the error still exists, any ideas?

Ok, it is an HDX16t with Windows 7 64-bit OS. I bought it in June 2009, but got it refurbished due to it being dropped in November of 2009. It hasn't been dropped or anything since then. other specs 2.13 GHz processor, 4GB of RAM, 130M GeForce Graphics.
Thanks in advance for any help!

Laptop kernel error while updating Nokia Asha200 t...

My phone is Asha 200.
The Nokia suite version is 3.8.30.
Laptop is Windows8.
I start the Nokia suite on laptop and then connect the phone via USB. The phone gets recognized and there is the software update also available. I start the update process. The software starts the backup process and then the phone restarts. This process is 15% complete, after which the laptop windows crashes giving me an error of KERNEL Update failure.
Don't know where the problem is... phone or OS????

Presumably logged in as "administrator" I seem to remember some users had similar issues whilst Nokia Suite was in Beta with Windows 8 but thought resolved. Is this 32 or 64 bit version by the way?
Happy to have helped forum in a small way with a Support Ratio = 37.0

Re: Error with Bluetooth Stack driver on Protege Z830

Error during installation of Bluetooth Stack for Windows 7 (15/05/12 version) : first driver "Bluetooth USB controller-10" installed correctly but second one "Bluetooth RFBUS" fails.
Consequently Bluetooth does not work. PC says it is not activated (with Fn+F8 or running Bluetooth paramater)
Nota : the Atheros driver is up to date. I have tried with and without the Bluetooth Driver Filter Package 1.0.9.
What should I do ?
Thanks !
PS : Protege Z830 PT224E with windows 7 64 bits

Oh, c'mon, folks, don't be so skeptical when someone reports a problem. What does it matter the reasons we can have reinstalling the bluetooth stack?
The fact is that THERE IS an issue with it. I'm also experiencing this problem the last OFFICIAL update. And I'm using only software provided by the Toshiba drivers download webpage, therefore it SHOULD work, as approved by Toshiba. (Model z830-10F, shipping the Atheros hardware)
When installing the new stack, the Bluetooth RFBUS (driver 8.0.2005.0) shows the typical yellow icon, and the device status reports "this device cannot start (code 10)". You all know how very useful are codes in Windows, don't you? :D
If I try to install any other driver for the RFBUS (from Atheros website for example) it fails saying I have already the latest driver. I've tried installing the Toshiba provided bluetooth stack with and without bluetooth activated in the BIOS, and it makes no difference: the install process gets stuck at some point, and it goes no further, no matter how much I wait.
Then of course I have to kill the process, after which, obviously the install doesn't work properly. Some suggestions about this?
A piece of information which might be interesting: when installing the stack, if I watch closely the device manager, there is a moment when the RFBUS appears and shows up with no problem, but then a moment later in the install process it shows the yellow icon.
Please, no replies like: "reinstall Windows from recovery partition", or "use previous bluetooth stack version". We're too grown up for that, aren't we? ;) Unless, of course, someone can tell me how or where to get the previous stack.
Thanks.

Regarding Errors in updating Nokia C1-01

Dear Sir / Madam,
I have been purchased a Nokia C1-01 handset from your company's authorised dealer with software version v4.4 one year ago. Then i install nokia ovi suite on my computer, this suite found new software version 6.5 from your website. i reinstall the software using nokia software update tool, the software is successfully updated, but when i see the nokia software update log file, i found following error in this log file :-
1. Failed to set new EEPROM version.
2. Failed to update new Dynamic Camera Configuration.
3. Failed to install new drivers.
Please give me best solution for this above said error.
Thanks!

Install the latest version of Nokia suite from HERE .. Then re-install the Firmware ..
Attachments:
Nokia Suite - Firmware Re-install.png ‏88 KB

MSI Z77A G43 A2 Error with Bluray SATA Drive

Hey guys!
My old Asus P67 motherboard died last week so I bought this board as a replacement. I plugged everything correctly and it seemed to work at first. PC booted fine into windows and I was able to play all my usual games and do my usual stuff.
After an hour or so I restarted the PC after installing the new chipset driver and LAN + Audio driver. I then got the A2 problem. I get this error code before the BIOS Picture. I googled around and it seems to be a problem with the SSD/HDD connectors or something. I then went about trying to find out which drive was causing it and it was my Bluray SATA Drive. The PC will start fine if I do not connect it, but once I do I cannot get passed the A2 error. I tried running the MSI Live Update 5 software to update my BIOS but it says I have the "latest" version.
Any thing you guys recommend? The Bluray SATA Drive worked fine on my old motherboard.
Thanks.
MPC

Quote from: flobelix on 05-May-14, 01:13:30
The SSDs and three other drives? So you are trying to populate all ports? If so try removing one of the other drives and retry.
Yes. I got too many drives laying around xD. Edit: 1 x SSD Crucial C300 64 GB for OS. 1 X SSD Kingston 240 GB for games. 2 x WD 1 TB Drives for storage. 1 x WD Raptor Drive for other programs.
About your request, I did this earlier on today when I was trying to find out what was causing the problem. It did not help the issue when I unplugged one of the other SATA Drives. Still would not start while the bluray player was connected.

Time Machine errors with external hard drive

This is my first post,
I've had my MBP for a little over 8 months and came up with an error when i went to go use bootcamp, saying that it could not partition my windows partition cause there is not enough space ( I have like at least 40+ gigs left after i partition it) and it tells me to backup and re-install. So what I wanted to do is do a time machine restore.
I take my 750GB Western Digital External Drive via Firewire and plug it in, time machine recognizes it and wants to format it as "Mac OS X Extended (Case-Sensitive, Journaled). So I do that and it all goes well.
After that's all done is basically when all my problems come. My external likes to lock up now and doesn't want to transfer all my files. I will load up the time machine restore and it sometimes will recognize my external and sometimes wont show up. My external will occasionally lock up during the time machine restore process. And all the time when it does actually complete and I restart the computer, it will have most of my things but all my pictures and stuff are missing off it and i go to look in my external and its still all in there but I'm left wondering why it didn't work.
As another resort i did a fresh re-install of mac os x and tried the migration assistant. It went going to restore it but then comes up with an error saying that it cant transfer the data and tells me to plug in my external when i have it already plugged in.
Since that didn't work I did another re-install of mac and decided to just start fresh, I still had all my music and other things that I had on my back up and tried putting them on my mac's hard drive and towards the middle and stuff it will come up with an error saying that it could not transfer files anymore and what not.
So I'm left scratching my head in wonder, because my external will show up on my desktop and I'm able to search files through there ok.
Could the possible problem be is that time machine partitioned it as journaled and case-sensative while my mac is partitioned as just journaled? Would that cause a conflict of having it locking up and giving me errors?
This is really the first time I've ever really been able to seriously play around with a mac and am totally lost and don't know what I can be doing wrong.
The external I have I just got last year not too long ago and it was working great before this.
I've been trying for the past 3 days straight trying to figure out this problem and have had no luck.
Please any help would really be appreciated greatly.
Thanks in advance!!!

Ok I tried what you said and I failed every time.
But here is an interesting thing that I just figured out. What I tried was making a folder on the desktop and I went into the time machine backup that I had I went and manually copied the applications, library, system, users, and developer folder thinking that it may work. Well it did for me with all the folders but not the Library folder. I think that it may be the culprit behind it cause it may be corrupt and thats why my stuff will keep locking up.
I will start copying all the other folders and they work just fine but then i would start to copy the Library folder and it would come up saying preparing to copy to "so and so" folder. well a bit into that it will stop and my external will spin down and stop working, all the other things being copied will stop in their tracks. But when I cancel it and wait a few for it to finally cancel, all my other folders will continue to copy to my desktop to the specified folder. I tried copying the Library folder over and over but same thing happened. It locked my system and my external up.
I thought all along that I had a bad external drive when i knew it worked well when I first got it.
So could that be a possibility that there's something in that folder that would completely halt everything when I'm copying? Because I've really never done a fresh reinstall of mac os x when I bought the machine. This backup is the factory install.
I'm just sitting here right now making sure that these other folders that are copying get done so I know that I can single out the Library folder. And so far so good with all the copying via firewire.

Have a problem with updated Nokia maps

i installed the lasted update of Nokia maps on my N86 8mp and now the gps icon doesn't disappear from the screen after i turn off the navigation and the direction voice doesn't work with the FM transmitter, i have tryed reset my phone and put everything back both with safety backup and from scratch (toke a couple of hours to get all stuff back) but i still have the problems
//Morifade

This feature is not currently supported by Nokia Maps. (despite it being included in the previous versions of Ovi Maps)
Many Betalabs Users have been requesting this feature for a long time.
To add your support, please join nokia beta labs (if not already) and support the following post:
http://betalabs.nokia.com/apps/nokia-maps-suite-2-0/suggestion/48288/voice-navigation-over-fm-transm...
It is interesting to note that somewhere in the Nokia chain this request has been denied. I have suggested a petition from us (users) may give the Nokia development team the support they need to gain approval for this.
Mobi Developer | Wap-2-Go Mobile CMS - www.wap-2-go.com

Error with updating via ipod updater 2005-10-12

I have just got a new ipod 4th generation 20gig. The first thing i did was charge it up it went fine. It was working okay and i could get into the main ipod settings such as the language settings the music playlist etc.
I instaled itunes first, then i installed the ipod update FROM http://www.apple.com/ipod/download and opened it up. WHen i did open it up i got this message.
http://img39.imageshack.us/my.php?image=untitled13bu.jpg
There is no way that i can update because the button isn't highlighted, and therefore i tried restoring it. I did then i got an error saying something about the firmwire or something is corrupt. I can't remember the exactl phrase. So when i tried to turn on the ipod i got a little folder icon with a yellow exclamation mark sign.
Since then i can't get into the music playlist and i can't restart the ipod.
And ideas, cos i am really annoyed.

I have fixed the problem.
I must have done this about a hundred times but on the 100th time it worked.
I did a windows quick format, then instantly did a ipod restore using the ipod updater. And it worked. Useually it would just mess up at the ipod restore part. Anyway, i had to plug it into a mains to flash it, not its back to normal.
Weird how i tried so many times and it didn't work the first time.

Error with Update Rule Formula

I have the following formula in an update rule
CALMONTH_FISCPER( Calendar Year/Month, 'SO', 1 )
and get the error (below) when loading data to the cube (loads ok to PSA). I have checked ROUTINE_0001 via the Generated Program and it is referring to a problem with the formula could someone assist? Thanks
error in a formula function (ROUTINE_0001 routine)

Hi:
Yes. You will have to maintain Fiscal Variant and Period breakdowns for that year.
If data is coming from R/3, its a good idea to speak with R/3 Finanace and tell them to amintains variant and periods in R.3 and then you can do a Global Transfer.
If not, you can maintain them directly in BW. I think you know how to do this part.
Ram Chamarthy

805a01f4 error with updating nokia drive

Similar Messages

Maybe you are looking for