806 & iAS listeners showing down after target discovery

we have EM 10.2.0.1.0 installed and agent installed on server which has 11i EBS.
It discovers database, 9i listeners, apache, forms etc.
But 806 listeners and iAS listeners are showing down even if it is running.
Opened a tar,oracle support says 806 listeners are not supported.
Did any one come across this type of issue.
Priya

Opened a tar,oracle support says 806 listeners are
not supported.
Did any one come across this type of issue.
No. But the information is clear that 806 listeners are not supported

Similar Messages

EMGC_OMS1 shows down after discovery of Weblogic GCDomain

Hi all,
I was following the steps in the following blog to reset my weblogic server password.
http://surachartopun.com/2010/06/reset-password-weblogic-console.html
After resetting, the GCDomain components (EMGC_ADMINSERVER & EMGC_OMS1) are showing DOWN status.
The log says that the password was invalid, so i guess the Grid Control is not using the new password to monitor weblogic servers.
I removed the target and managed to rediscovered it using the new password, but EMGC_ADMINSERVER is showing as UP but the EMGC_OMS1 is showing as DOWN.
I am confused here, hoping anyone could help me.
Thanks
Joel

What if you change the password back to what it was? Will EMGC_OMS1 be showing UP again?
Also check MOS note: How to Change the WebLogic Server Administrator Password [ID 1082299.1]
Eric

G5 mac dual 2ghz ppc shuts down after target disc boot

Please help. I'm trying to startup my ppc in TD mode and it shuts off after a brief showing of the firewire logo on the monitor... has anyone else seen this problem?
thx
a
g5 dual 2ghz ppc Mac OS X (10.4.8)

It is connected to a new intel mac pro. I'm trying to use the migration manager to transfer data. I have disconnected all other devices, and running just 1 monitor. I have taken RAM out (in a pair) in an attempt to reset the PRAM (but my keyboard commands do not work either) The only keyboard command that does work is "c"... ay ideas?

Bridge: when I want to export from .psd to .jpeg the export window opens but the target (Ziel) window is empty, thus no target can be selected. This happens since a brigde shut down after "out of memory"

Bridge: when I want to export from .psd to .jpeg the export window opens but the target (Ziel) window is empty, thus no target can be selected. This happens since a brigde shut down after "out of memory"
Felix

Not quite following your terminology.
Möchten Sie es vielleicht mal auf Deutsch versuchen?

My phone is always charged and always on but when i make or recieve a call it shuts down after 2 mins and just shows the apple icon and after another 2 mins will restart, any ideas what is wrong?

My phone is always charged and always on but when i make or recieve a call it shuts down after 2 mins and just shows the apple icon and after another 2 mins will restart, any ideas what is wrong?

You may have to restore your phone to correct the problem.

My iphone 4 drop down after that it start showing apple logo i have restored it after that it shows searching on carrier signal and shows that Connect to itune... when i connect it to itune, message came that there is some problem with your iphone.

My iphone 4 drop down after that it start showing apple logo i have restored it after that it shows searching on carrier signal and shows that Connect to itune... when i connect it to itune, message came that there is some problem with your iphone.Please help me out.

Hi ahsanikram!
I have an article here for you that can help you troubleshoot this issue with your iPhone:
iOS: Troubleshooting update and restore issues
http://support.apple.com/kb/ts1275
If you are still having issues after attempting the troubleshooting steps in the previous article, see the following article:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

Just updated my 4S to iOS 6 - it shut down after the instait showed a "connect to iTunes" icon.

Just updated my 3GS to iOS 6 - it shut down after the install - then it showed a "connect to iTunes" icon.
iTunes said the phone was in recovery mode & needed to be restored. Clicked "restore" in iTunes & get "iTunes is restoring the software on this iPhone" - didnt work - came back to showing the "connect to iTunes" icon.
Have repeated the process twice now - same result - "connect to iTunes" icon displayed on the phone & iTunes says the phone is still in recovery mode

See Here > http://support.apple.com/kb/HT1808
Be sure to Follow ALL the Steps.
Some Users have reported that as many as 8 or 9 attempts were necessary Before success.

System Slow-Down After Printing

I recently installed Mountain Lion. Over the last couple of weeks I have noticed a significant operating system (10.8.2) slow down after printing with my Epson R3000 printer. This happens after every printing session. When I say slow-down I mean significant delays and dreading "beachballs" when opening applications, selecting menu items or anything else I should choose to do. I'm left with re-starting the computer to get going normally again.After re-atarting I have gone to "verify permissions" and I get approx "5" pages of permission errors, all associated with the printer library in some fashion or another. I then repair all those permissions and re-start my MacPro. The operating system then works as normal and I can use the computer with no problems (until I start printing again). I mainly use the computer for photo editing with Adobe Photoshop CS6, Adobe Lightroom 4 and Aperture 3.2.
I did not have this problem before upgrading to Mountain Lion (and then to 10.8.2). I did not get "significant" permission errors before upgrading. Since all printer drivers for this printer are handled now by Apple via the "new" Software Update process I can't even re-download the Epson printer driver and start over. I'm completely at a loss as to what, associated with the printer function, is causing these "significant" permission errors and subsequent operating system slow down. My printer is almost brand new and was working flawlessly before Mountain Lion. Let me be clear though, I can print fine. My problem is the system slow down after using the print function which I am only guessing has something to do with the "5" pages of permission errors after printting photos (with CS6/Lightroom/Aperture).
Incidently, I am not in any way a computer expert. Verifying and repairing permissions is about all I know how to do that's why I need help. I also just thought I would try the forums first before going to technical support to see what people thought about this.
Again, I repair the permission errors, re-start my system and all is fine. Any further suggestions would be deeply appreciated.

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Is there a way to prevent ibooks author from shutting down after just one or two uses of the alpha tool?

Is there a way to prevent ibooks author from shutting down after just one or two uses of the alpha tool?

Hello One Job at a time,
Deleting the application will not delete your projects.
Normally I keep all my work files on a separate drive.
If you command click on the title name of your project you will get a drop down path to show you the location of your book project.
or you can click on the drop down triangle beside its name to duplicate.
Just remember where you saved the file too.
In your applications folder on your computer select the iBA icon and press delete and also erase / empty the trash can.
You can then go back to the APP STORE and install iBA from new again.
I hope this helps.
Regards,
Nigel

Bluetooth shuttted down after I updated to Mavericks, please help me ! I am 70 Years old and worked very happy with my iMac (21,5" mid 2010, 3,2 GHz Intel Core 3) until I updated him from SnowLeopard 10.6.8 to Mavericks 10.9.2. 2 Days all was OK. Next M

Bluetooth shuttted down after I updated to Mavericks, please help me !
I am 70 Years old and worked very happy with my iMac (21,5“ mid 2010, 3,2 GHz Intel Core 3)
until I updated him from SnowLeopard 10.6.8 to Mavericks 10.9.2.
2 Days all was OK. Next Morning-Start he needs (until now) 3 minutes to show me a SCREEN only milky white. After that he starts like ever with all ICONS in about 1 minute. (together 4 min.)
..But I must notice, that I cannot make anything, because the „BLUETOOTH APPLE WIRELESS KEYBOARD and the APPLE MAGIC MOUSE“ doesn't work anything like before.
I could nothing do, I must drop my APPLE only out.
That I maked ever 10x and all was the same... (Maveriks also 4x new updated)
I taked my Logitech-Bluetooth-Mouse from the WIN-Laptop, dropped it in USB from iMAC...and in one second I could work only with this MOUSE...I buyd the Logitech COMBO K520 and all was OK now with my lovely APPLE iMAC to work with him...But without APPLE KEYBOARD and MAGIC MOUSE...and with a 4 min. -START until now.
I asked the EXPERTS from APPLE-SUPPORT under Tel. 0800-6645451 in Germany, became a Number, maked many Things by starting new, but the mistake after all is the same like before.
When I look into ...Apple/ Info/System/ Hardware/ Bluetooth ..my APPLE says: NO INFOs FOUND (Es wurden keine Informationen gefunden.)
Under Hardware/ Diagnose : Selbsttest beim Einschalten: zuletzt ausgeführt: 15.05. 14, Ergebnis: Bestanden (that means OK) !!
I asked many Peaple, who sold APPLE-Computers in the STORS, but they all had no IDEA, how they can help.
I think, it could be a DRIVER when Starting the BIOS, JAVA RUNTIME a.s.o...
Is an Expert under YOU to help me by my Problem with this iMAC ?

dietmarfromdeu,
if you start up your iMac in Safe mode, do you still have Bluetooth problems with your Apple wireless keyboard and Magic Mouse?

System slow down after upgrade to 10.10.2

Still have a slow down after updating to 10.10.2
Tried everything I can think of.
Get spinning color wheel for a long time when opening even small files. Scrolling through folders, cursor hangs for a moment. opening and saving takes much longer.
Used HD repair and repaired permissions and diagnosed HD. No problems.
Looking at Activity Monitor, I don't see anything that stand out-
-C

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

12c - Listener shows down

I added a host to 12c and it discovered database. Listener shows down. The listener on the host is actually up. 12c is looking for listener.ora file in a specific directory (TSN_ADMIN) but the file is in $TNS_ADMIN/SID_host directory. How do I manually correct the configuration so that the agent knows where the listener.ora file is? I looked everywhere but I can't find a location in 12c where I can put in the location of listener.ora file.
I want to update this target's "LISTENER.ORA Location" parameter with the location of the currently running Listener. How do I do this? Thanks.

>
I want to update this target's "LISTENER.ORA Location" parameter with the location of the currently running Listener. How do I do this?
>
Go to the homepage of the listener target, and select Oracle Listener > Target Setup > Monitoring Configuration. You can then specify an appropriate value in the Listener.ora Directory field.
Regards,
- Loc

Mail shut down after launch

Even after Recovery installation of OS X, Mail on ly worked one day before Mail again shut down after launch and receiving incoming mails. Any who have a functionally solution to fix this subject.

Do a backup.
Quit Mail.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Go to Library/Containers/com.apple.mail. Move the folder com.apple.mail to your desktop. You must move the entire folder, not just the contents.
Restart, re-launch Mail and test. If the problem is solved, recreate any required Mail settings and import any emails you want to save from the folder on the desktop. You can then put the folder in the Trash. If the problem remains, return the folder to where you got it replacing the one that is there.
Information learned from Linc Davis. Thanks to leonie for some information contained in this.
Crashes/quits unexpectedly

Status shows "Down" in EM in 10g Home page

My current Oracle 10g Status on EM Home page shows "DOWN"
What must I do to change the status to show "UP"? Is this normal? Any suggestions?
Please can someone help?
How do I fix this?
Thanks

Hi,
Thank you. Its works...
Below are the steps...
Set the ORACLE_HOME and ORACLE_SID environment variables to the ORACLE_HOME and
SID of the 10G database.
- Stop the dbconsole using :
$ cd $ORACLE_HOME/bin
$ emctl stop dbconsole
- Re-configure the port used by the dbconsole by running this command :
$ emca -r
- In the above command, enter the listener port details as 1522. Enter the database SID and service name.
Specify the passwords for the sysman, dbsnmp and sys as sysdba users.
The dbconsole will be started automatically after the configuration has been completed. Access t
he URL and verify the status of the database.

My iphone 4 broke down after trying to upgrade to ios7, help please;)

My iphone 4 broke down after trying to update to ios7, the screen turned black, then went on and showed me the conncet to itunes symbol, but it was already connected, now it's stuck and nothing is responding, itunes isn't even recognizing the iphone, help, thx in advance

Kevin ..
Try this support article > iOS: Device not recognized in iTunes for Mac OS X

806 & iAS listeners showing down after target discovery

Similar Messages

Maybe you are looking for