806 routers don't work

During my Cisco Academy days I bought the Cisco 806 Broadband Router - a fixed-configuration dual Ethernet platform.
I turned the unit off for the summer semester and when it was turned back on - it no longer worked. The TX/RX lights on both the Internet and LAN sides are steady-on.
I sent the unit to Cisco, in return I got a refurbished unit - 3 times I did this - 3 times I got a new serial-number box with the same problem. I contacted the TAC about this, and they deny ever having heard of this issue before. I can't be the ONLY person to have that happen - and with new refab boxes from Cisco too.
In order to get the box to run correctly, I usually opened the top and took out the RAM while the power was ON, then tunred off the power, reset the memory, and then turned it back on. Then it worked, if not I would repeat until it worked - about 2-3 times did the trick.
So, I sent unit 2 back to Cisco, and 2 weeks later I have unit 3 - another refab unit.
Same thing, only this time, I can't get it to work at all.
It appears to be happening when the IOS tries to load - decompressing the image I guess is where the error occurs.
It has the correct IOS in the correct location. Memory is OK, hardware is OK.
I can't get to the console at all - so I used the output I had from the last time it did stop working with at least rmon access.
Does anyone know how to fix this box? Ever heard of this before?

Can you send me the error message with which the router stops booting?. With that error message, I can trace out the root cause of the problem.
Looking at ur problem,. I need to get clarified regarding the following aspects;
1.Did u check the power source received?.I mean from the main.is that normal?
2.Which ethernet device u r conecting to 806 router, a hub or a switch or a modem?.Ensure that they are working properly.
Follow these guidelines while connecting the devices to the router:
1.Connect the color-coded cables supplied by Cisco Systems to the color-coded ports on the back panel.
2.If you must supply your own cable, see Appendix A of the below mentioned url for cabling specifications. If this appendix does not provide specifications for a particular cable, we strongly recommend ordering the cable from Cisco Systems.
This is the url that explains about hardware installation of 806 router.
Follow these guidelines when connecting devices to your router:
http://www.cisco.com/en/US/products/hw/routers/ps380/products_installation_guide_chapter09186a008007c81b.html

Similar Messages

It's 2AM! ASA5510 with routers and PIX as spokes sitll don't work

Hi,
It's already 2:00 AM here and I can't still make this to work.
We have an ASA5510 with static IP which will serve as the new VPN hub to 3 spoke sites that has PIX, 1841 and 2821 . ASA5510 L2L connection to PIX with static IP works well. But the ASA5510 L2L link to 1841 with dynamic IP (ADSL) and also, the ASA5510 L2L link to 2821 both don't work.
Links from PIX to ASA5510, 1841 and 2821 are all up.
I'm attaching the config of ASA5510 and the 1841 to start.
Grateful if someone can look at the configs and point me to the right configuration.
Thanks in advance.
Archie

Hi,
Thanks for your reply.
The L2L links with both static IPs are up now but I can't make the L2L (dynamic to static) work. I already put the crypto dynamic at high sequence and I also added the line:
tunnel-group-map default-group DefaultL2LGroup
See my crypto. I don't know what parameters I still need to add.
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto dynamic-map outside_dyn_map 6000 match address auh2dxb_acl
crypto dynamic-map outside_dyn_map 6000 set transform-set ESP-3DES-MD5
crypto dynamic-map outside_dyn_map 6000 set reverse-route
crypto map outside_map 10 match address auh2mct_acl
crypto map outside_map 10 set pfs
crypto map outside_map 10 set peer 212.72.26.91
crypto map outside_map 10 set transform-set ESP-3DES-MD5
crypto map outside_map 30 match address auh2kub_acl
crypto map outside_map 30 set pfs
crypto map outside_map 30 set peer 202.160.32.113
crypto map outside_map 30 set transform-set ESP-3DES-MD5
crypto map outside_map 6000 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp identity address
crypto isakmp enable outside
crypto isakmp policy 1
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
crypto isakmp policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp nat-traversal 20
Regards,
Archie

Dw cs4 -some links don't work, others do. whyyyyyyyyyy??????

My links to "directions" and "gallery" from the home page don't work. But, if you click on "request a quote" at the bottom of the home page, you can link to them from there. I can't figure out why. Also, as you can see my contact page shows up on a google search for "Codiac Printing" but not my index page. How can that be???
Can someone please tell me where I'm going wrong????
http://www.codiacprinting.com/contact.html

andyBall - Thank you so much for the dialog on this issue. I think we have narrowed this down to my router and the openDNS parental control service.
NetGear partners with openDNS. You get a paid OpenDNS account, then the NetGear router downloads a custom generated blacklist/whitelist into the router. You manage the list on the OpenDNS website, then your router pulls down the list and runs the known blacklist/whitelist locally, and then DNS queries go through OpenDNS.
I whitelisted metrics.apple.com and apple.com and everything works in Safari. Remove the whitelist, and it does not work again. OpenDNS also has a bypass application that you can run on the local machine to register your Mac/IP address, and get direct access to the ISP’s DNS bypassing the Netgear routers’s OpenDNS.
It’s funny that all the iOS device in the house work fine on apple.com, all the Firefox installs on PC work fine on apple.com. I even tried changing my Safari user agent settings and still the website version I get from apple.com has these long obscure urls in the default click, but if you right click or turn off JavaScript everything is fine.
I can only assume Apple is serving up some form of website JavaScript to help with website tracking for guest to their website that is specialized for safari. It is most likely that this url link is soooo long it is breaking on my router when it is checking it’s black list, causing the router url check buffer to fail on the router???

My wifi Don,t work on iOS 6 iPad 3 Please help me, My wifi Don,t work on iOS 6 iPad 3 Please help me

My wifi Don,t work on iOS 6 iPad 3 Please help me, My wifi Don,t work on iOS 6 iPad 3 Please help me

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
Try This - Renew IP Address:
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Internet Don't work after the last IOS Upgrade. What can I do?

Internet Don't work after the last IOS Upgrade. What can I do?

Can you give us more details?
Is Wi-Fi working, i.e. not greyed out in Settings/Wi-Fi?
Can you go online by using the Mobile Network?
Any error messages given?
Problem with your router?
See these articles for help with Wi-Fi issues:
Issues with Wi-Fi networks and connection
Wi-Fi or Bluetooth settings grayed our or dim
If you see No Service in the status bar of your iPhone or iPad - Apple Support
iOS and OS X: Recommended settings for Wi-Fi routers and access points

WRT54GS v7 failes to maintain connections (tried 2 different new routers; old WRT54G works fine)

Okay, I'm going crazy on this. My old WRT54G stopped broadcasting its SSID so I decided to invest in a new WRT54GS. I bought it, installed it, and it works for around 45 seconds then dumps all my connections (both wired and wireless).
I'm connecting the router through my cable model from Comcast (model SBV5220). If I reset both the cable modem and router - I get another 45 seconds of connectivity before losing connections to the router - no connectivity at all, not even 'limited'. The PCs (desktops, laptops) can't see the router until I reset it.
All the new router settings are the same as those on my old WRT54G (which again - will work just fine for any wired connections if I reconnect it; the wireless connections obviously don't work since the router isn't broadcasting any SSID.)
Thinking I might have a bad router, I took it back and exchanged it for another - same exact problem.
I'm using DHCP, normal subnet, and on the new routers - to simplify my testing - I've tried installing just with wired and didn't configure the wireless. I've also installed with the Linksys EasyLink on a system with Vista; as well on a system with Windows 2000 to avoid the utility (saw another post were someone was suspecting the utility was causing intermittent loss of connections) - no difference.
Can anyone think of something I can try - I've been working on this for over a year as the problem started last Friday in 2007
Thanks!

So, I said I would post back my results, and then I was quiet for a long time. I returned my WRT54GS for the same model (different instance) and installed that... that was about 3 weeks ago. While I can say that the connection is dropped less (only 3-4 times in the last three weeks, where the older router was dropping the connection on the wireds devices 3-4 times a day), it is still getting dropped. I only have to reset the router (not the attached PC) to get back up and running, so right now the question is whether I can put up with one reset a week, since it only take a few moments... versus the hassle of getting yet another different router. I'm debating. But anyway, I thought I'd post back, since getting a new router didn't completely help my situation (though for some reason seemed to make it better)
Message Edited by Enstrim on 01-24-2008 03:48 PM

"Enable Swipe" don't work and Tablet Layout on a Smartphone

Hi there,
I have two big problems with my own site www.mhgrafikdesign.de:
1. I have different slideshows in my tablet version of my site. I created the slideshow before one of the updates with the feature "Enable swipe" came out. However, it worked well on my Samsung Galaxy Tab 10.1n. Now I have a Microsoft Surface and it's not working anymore although "Enable Swipe" is enabled. I don't know if the Microsoft Surface has problems with the slideshow or one of the updates has "damaged" my slideshow. Please help me! Any ideas?
2. I have a HTC 8S smartphone and if I type www.mhgrafikdesign.de my smartphone always show me the tablet version. Any idea why? P.S. Swiping there is also not possible.
Many thanks for quick help. My website is my flagship in the web and it's a little bit embarrassing if my slideshow on the tab don't work... = /

This is now a slideshow created with Muse: Homepage
The slideshow uses fullscreen mode and was build with the latest version of Muse. On my Win8-Tablet, it is not working. I tested this with the IE11 in desktop- and in modern-ui-mode.
Next to this problem, I also run into these things:
1. Using the buttons to go forward and backward in the slideshow will select the text-arrow inside the button when touched.
2. Clicking the forward- and backward-button behaves different. Windows Desktop -> slideshow does not roll back, so you can click forever in one direction, no feedback that you reached the end. On iOS -> slideshow will be rolled back and you get the visual feedback to start over again.
3. Zoom into the fullscreen-slideshow will result in strange and not really controllabel behaviour. Zooming in does not allow to pan.
But I am not talking only about the phones. It is more about windows tablets in general. So, content can be viewed in the InternetExplorer11 in desktop-mode and also in modern-UI-mode (touch does work in both modes). But it is also possible, that people use other browsers like Firefox and Chrome. I think, it would be a quite a good idea to translate the movement of the mousepointer into gestures. This javascript library shows what I think is a good aproach: Hammer.JS - Hammer.js

Adobe Flash & Javascript don't work even though Enabled

Ever since what I think was either a Firefox upgrade (I don't know which one) or installation of Quicktime, my Adobe Flash Plugin is perpetually crashed and I cannot play any Flash content on any website. All that displays in place of the video is a gray screen with the sad-face Lego icon and the message: “The Adobe Flash Plugin has crashed. Please reload the page to try again.” (See attached image.) But it will not resolve when reloaded.
No Flash videos on any sites work. HTML5 videos work on YouTube when tested, but non-HTML5 videos won't work.
Also, my Javascript does not seem to be working since at least some displays requiring javascript don't work. Sometimes the display just doesn't work, and sometimes I get a message that javascript is disabled and must be enabled, but it is already enabled (set to “true” in about:config).
I have spent days scouring every help forum entry I can find on troubleshooting Flash Player and Javascript. Everything on my end seems to be in order and I cannot find or fix either problem. I think it is possible the issue could have its roots in the fact that Javascript seems to not be working which may be preventing Flash Player content from working...??
Also, Flash content does work in I.E. but not in Firefox (I do not have Chrome installed so did not test in Chrome). I have too many window tabs open in Firefox and can't switch to I.E. (nor do I like to use I.E.).
PLEASE HELP as this is crippling for very important work deadlines I have.
This is what else I know and have tried:
I have a Toshiba Satellite C75D-A Laptop;
Processor: AMD A6-5200 APU with Radeon HD Graphics; x64; 2.00 Ghz;
RAM: 8 MB;
OS: 64-bit system; Windows 8.1 (but some auto-check utilities detect it as 8.0 because it was upgraded.);
Graphics Card: “Desktop Graphics” System – AMD Radeon HD 8400 (0x9830);
Installed Graphics Driver Version: AMD 13.352.1004.1007 (Driver Date: 4/22/2014)
My Device Manager graphics driver updater states: “driver software is up to date.”
From the AMD website: the graphics driver auto-detect utility recommended the AMD Catalyst Driver (amd-catalyst-omega-14.12-without-dotnet45-win8.1-64bit.exe) I tried installing this driver, but it won't install. After trying to install, I got a message stating: “We are unable to find a driver for your system.” But Device Manager states I have a current driver, and my graphics card & driver seem to be working fine, so I do not believe this is part of the issue.
I am using Latest Firefox version 35.0.1; and
Using Latest Flash Player: 32-bit NPAPI Plug-in Version: 16.0.0.296; designated: “always activate” (Downloaded new update several times, including fresh install after uninstall; system & web address icons indicate Flash is enabled).
I turned off hardware acceleration in FF Tools>Options>Advanced>General
I disabled WebGL as explained here: https://support.mozilla.org/en-US/kb/upgrade-graphics-drivers-use-hardware-acceleration
I am using Ad-Block Plus which has never affected things in the past. I have not tried starting FF in Safe Mode because I believe I will lose all open tabs and not be able to recover them (I may have over 200 open). But disabling add-ons has no effect (I disabled all except for Sessions Manager in case of a crash). (My No-Script has been disabled for at least six months.)
I have Windows Media Player and Quicktime installed.
Quicktime is most recent upgrade (7.7.6) so should not be a problem according to:
“QuickTime plugin takes over Flash” at:
http://kb.mozillazine.org/Flash#Disabling_Protected_Mode_in_Flash_11.3
(note underscores in place of spaces in string; underscores not insertable here)
Disabling Quicktime had no effect in the prior version of FF (ver. 35.0), but in latest FF ver. 35.0.1, Flash videos only display a plain (blank) gray screen instead of the sad-faced icon and crash message.
(I tried to uninstall Quicktime altogether, but was not able to due to Error codes 2502 & 2503. I tried troubleshooting that as well with no luck using methods successful for other programs, including here:
http://www.fixkb.com/2014/01/error-2503-and-2502-when-uninstalling-on-windows-8.html;
& here:
http://answers.microsoft.com/en-us/windows/forum/windows_8-winapps/re-internal-error-codes-2502-and-2503-for/ba5f2145-aa6e-4cc0-81a7-e4346f43b698.)
Disabling my FF theme and using the default brought back the sad-faced icon and crash message in the place of videos on some YouTube pages, but not other YouTube pages (where video was still blank gray screen). It also enabled a still Flash image (an ad) to display on a different website page that previously had a Flash Plugin crash message. I have been using this same theme for a couple of years without previous issue. While turning it off did generate an effect on some still imagery, it didn't fix the video problem.
I tried Disabling Protected Mode in Flash 11.3 as explained here:
http://kb.mozillazine.org/Flash#Disabling_Protected_Mode_in_Flash_11.3
(note underscores in place of spaces in string; underscores not insertable here).
It did not solve the issue.
I also deleted all storage & data in Flash Player as advised. This had no effect either.
I've tried all solutions I've been able to find and am at a loss for what to try next. Please help and advise ASAP. Thank you!!

''guigs2 [[#answer-684038|said]]''
<blockquote>
I truely admire the efforts that have been made to make this work.
"“We are unable to find a driver for your system.” "
For it not installing, you need to follow these instructions to install them: see the comments: [http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_devices/windows-10-atiamd-display-drivers/50944d10-dde3-4e08-8244-d54eb2b1e7de] --> take warning though it looks like it has caused issues for others as well.
Since it was working for some youtube videos and not others, there might be an issue with a particular video codec. DO you have OpenH264 Video Codec provided by Cisco Systems, Inc. plugin?
Is it possible to try Safe Mode after saving your session with [https://addons.mozilla.org/en-US/firefox/addon/session-manager/ Session Manager Addon]? IT would test hardware acceleration in Firefox.
</blockquote>
Thank you, guigs2! Sorry for my delayed reply...I didn't realize I hadn't gotten back to you. Update is that I did try a whole slew of other troubleshooting steps including starting FF in safe mode, to no avail. However, I was FINALLY (after months) able to solve this problem just today by pure chance!
The problem was that hardware acceleration was enabled in the Flash settings. I had not been able to turn it off because I didn't have access to the Flash Player settings as long as the crash error message was visible, which was all the time! Today, by a sheer fluke, I saw a static picture in place of the crash message on a Flash video. I snagged the opportunity to call up the settings and turn off hardware acceleration, and it fixed the problem for my whole browser! This has been a frustrating issue because I did not have access to the settings utility as long as I had the crash message, which was always, so my Flash was crippled without the ability for me to fix it until pure luck gave me this window of opportunity.
Does anyone know another way to access the settings utility if this ever happens again in the future? I could not find a way. (Incidentally, I had tried disabling hardware acceleration via my graphics driver settings, but it didn't fix the problem.) We need Adobe to allow some other way to access the Flash Player settings utility when this problem arises since they aren't accessible when there is a static crash message.
Thanks again!

IPod Touch: apps (facebook, twitter, facetime) don't work properly with my wireless internet having worked perfectly before. Help needed!

I got my iPod Touch 4g for Christmas 2011 and for the first 2 weeks everything worked fine - I could download apps; use apps to their full potential; use FaceTime; use everything.
But after the two weeks, the iPod decided to no longer work as well as it had promised. First of all, it would take more than 2 hours to download a single app from the app store and then, straight after that, I couldn't connect to FaceTime (it had worked perfectly before). Then, finally, to top it all off - Facebook and Twitter stopped working on occasions. For example, I couldn't post/send messages or photos on Twitter and at the majority of the time, the News Feeds wouldn't load.
Sometimes everything works but most of the time it doesn't. I've tried my iPod at every time of the day and it makes no difference - nothing still works! Also, I don't think it is the fault of my wireless internet because I've had an iPod touch before and it worked perfectly, and the laptop that I am writing this question on also works perfectly with wifi.
The weird thing is that I have used my iPod to its full potential (everything worked fine) at my friends hosue on multiple occasions - using his wifi. I am really lost for ideas for what to do - I have uninstalled all the apps that don't work with the internet (facebook, twitter) and have always made sure that I have closed apps after using them, so that my iPod wouldn't run slow.
My iPod has been like this for over a month now, help would be appreciated

Do you have a blackberry data plan active. On your account? You need an active blackberry data plan to use the majority of data functions on your phone, even if you are connected to wifi

TV don't work with OSX Server software?

Everything worked great BEFORE I updated our MacMini Intel to OSX Server software, now iTunes can't find the recent found Apple TV. And therefore the connection is gone and the syncing don't work anymore.
Any work-around or suggestions on how to solve this?
Or do I have to revert to previus userversion of OSX to make it work again?
Is there a limitation built into OSX Server software or is there maybe some kind of firewall / preferences etc that needs to be adjusted? (The built in firewall has been disconnected.)
FYI:
All apps are up to date. The Mac Mini + Apple TV is on my local network at home and I'm trying to make it my family's digital hub for all family-related media.
MacBook Pro CD2 & X-servers Mac OS X (10.4.9)
MacBook Pro CD2 & X-servers Mac OS X (10.4.9)

1) I've not tried to reset ATV from scratch. But it works fine on other Mac's on the network (sharing).
2) Security options, yes I belive so to. I've followed all instructions and opened all ports I've seen mentioned i apples Knowledge database / support. Still don't work. Maybe I've missed some ports...
3) YES! It works fine sharing the MacMinis lib over the network.
4) Today I also tried to reinstall iTunes. But no luck.
Any mor suggestions anyone? Thx
I really wanny solve this, otherwhise my ATV is pretty useless for me...

Help needed! Just want to cancel my year subscription. No answer from support via mail, noone answers when I call, support chat don't work.

Help needed! Just want to cancel my year subscription. No answer from support via mail, noone answers when I call, support chat don't work.

Hi there
I'll pass your details to our Russian team and they'll contact you to assist further.
Kind regards
Bev

Bookmarks exist but don't work in PDF (exported from InDesign)

Hi all,
I had a similar problem a few months ago where SOME cross-references within a document weren't taking you to the right place when exported to PDF although they appeared to work fine in InDesign (the "source" and "destination" arrows took you to the right place). Someone suggested exporting the file to IDML and importing again, which worked fine.
Now I'm working on the same document (an update) but it's grown a bit and so each chapter is in its own file within a book. Problem is similar but not the same. Some cross-references work fine in the generated PDF, others are recognised as being links (cursor changes) but NO effect when clicking on them... not taking me to the wrong place, nothing is happening at all. ALSO the table of contents AND the bookmarks don't work.
I've exported each chapter to IDML, recreated the InDesign files and recreated the book, but still no joy. If all else fails, I'll put the book back into a single file but I'd rather not go through this pain each time I have to update the book (especially as this latest change was really tiny).
Any suggestions? Are cross-references between files in a book known to be problematic? And if they are, has the problem been addressed for CS5.5? (I'm looking to use InDesign for a journal that will contain a lot of links between elements, but the turnaround time is tight and I'm wary of this issue being a problem each month.)
Currently using CS5 on Windows 7 Professional, and Acrobat 9 Pro Extended was installed as part of the Tech Comm Suite.
Thanks in advance,
Alison

This is so funny...I was just about to close my email and look up the
Forums to profusely thank the person who posted the solution to a similar
problem I was having in CS4. I'd created numerous hyperlinks in Indesign
documents and sometimes the links worked in a pdf, and sometimes not. The
problem solver was talking about a solution in Word, but I found the same
type of text in the PDF settings box that pops up when you want to save the
pdf. There are all kinds of checkboxes and I'd thought I was doing enough
by checking 'add hyperlinks'...but the advisor said you have to make sure
'tagged PDF' is CLEAR. So the same thing will probably work for you with
your bookmarks! (...if the settings are similar in CS5 of course, and
there's no reason they shouldn't be. I guess.)
The only thing is, there's a lot of what we call 'ant work' ahead of me. I
have to go back to each InDesign doc and retype the text in the home font,
and create the hyperlinks over again. Luckily, the hyperlink destinations
are still there. It's not enough just to export the document again with
the Tagged checkbox cleared, and you can't create a new hyperlink over an
old one; the 'new hyperlink' option isn't available under Interactive. So
you may have the same problem.
Let me know if this works! I'm off to thank the person...
Susan

Some share buttons don't work on my tablet

I have a Samsung tablet, model GT-P3113 and its Operating System is Android. In some websites when I click share buttons like addthis and sharethis, they don't work and are inactive. I refresh the page and it doesn't help. For example, none of share buttons of http://www.threehosts.com/ratings/comparison-software/wordpress-vs-joomla-vs-drupal.html work on my tablet, but when I go to this page via my Laptop the share buttons work. My laptop OS is Windows 8.
One of my friends has iPad and I sent this link to him. The share buttons work correctly for her.
Does my problem come from my Android which doesn't support share plugins perfectly, or it comes from my tablet model?
Is there anyone with Samsung GT-P3113 on this forum? If so, could you please test the mentioned page and tell if its share buttons are active or not?

I have the Samsung Galaxy Tab 2, 7", model GT-P3113, wifi only (not on my Verizon plan). It's currently running Android 4.2.2; the share buttons on the site you listed above seem to work for me...I didn't actually go through and "share" anything, but I did get to this screen and it appears that all I need to do is log in to whatever service I want to use to share the post :

Upgraded to yosemite now my speakers don't work and i can't play videos on Facebook.

When i play a video on face book I'm told i need to upgrade flashplayer, i wasn't even aware i had it downloaded! I have got rid of flash player (i think ) and now I'm told i need to download FP before i can watch videos. I can't play games on FB either and my speakers don't work.
I wish i hadn't upgraded to Yosemite to be honest as i prefer the old layout and it seems to have caused me problems. Everything was working fine before the Upgrade to Yosemite.
Im not good with computer terminology so please reply as simply as possible :-)
Thank you

Try un-installing and then re-installing.
Adobe Flash Uninstaller
Adobe Flash Player
Adobe Flash Player updates available for OS X on October 24, 2014
Sound.
Sound – can’t hear sound from speaker - Yosemite
Sound – No Sound After Upgrade (2)
Sound Levels - Troubleshoot
Sound – Troubleshooting Internal Speakers

Menus on some web sites don't work

I have just activated 2 new Lumia 520 phones with Windows 8 mobile. (updated to Amber)
When browsing the web, the menus don't work on a couple of web sites that I have written.
These menus use Javascript to show drop down lists and to navigate to the appropriate pages. When you click a link on the menu, the drop down menu appears for a couple of seconds, then disappears. Even in the couple of seconds that the dropdown appears, it can not be clicked.
Interestingly, these web sites also use javascript to open overlay pages when a thumbnail picture is clicked, This action works.
These menus have been regression tested in all the major browsers and they work on a PC, Mac, iPad and Android but seem to fail on Windows 8 mobile.
I searched and can't see any option that allows me to enable or disable Javascript.
Here are links to those 2 sites:
http://www.garynancy.com/index.html
http://www.chisholmtv.com/
What am I missing?

The menuscript (popupmo.js) you are using will not work.
I'd suggest you take this to http://developer.nokia.com where you will likely find more help as this is a general user to user support platform.
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

806 routers don't work

Similar Messages

Maybe you are looking for