808 pureview cannot connect to internet after 3G c...

Hi!
Today morning i installed this 3G compatibility fix via nokia suit.
After while i noticed, that my phone is unable to connect to internet.
Indicator on the top of the screen shows that 3,5G network is established, but when i open browser (or any other app), it cannot connect.
I tried to reinstall firmware via nokia suit, but no luck.
What should i do now? Any ideas?
Jaak

Try to restart the phone without the SIM card to refresh the SIM settings.

Similar Messages

  • Cannot connect to internet after ios7 grade

    After updating my ipad to IOS 7, I got a message "cannot connect to the internet."
    From the apple communities, this is a common problem.
    I tried completely turning off the ipad - unsuccessful
    I tried resetting the network settings (settings, general, reset, reset network settings) - unsuccessful
    The next suggestion was a general reset (settings, general, reset, reset all settings), but this would require a full restore afterwards.
    Apple support at that stage suggested rebooting the home internet (turning off the modem/router, unplugging it and waiting 10 seconds, replug and turn back on)
    Success!
    This is an easier option than full reset, and worked in my circumstance

    Does your iPad connects to other router/network e.g. Starbucks, Local Library?

  • Cannot connect to internet after software update

    I have an old powerbook G4 running Mac OS X 10.3.9 (this is one of 3 macs) I also have an airport Extreme and an airport Express to make a network in my home. Frequently, after a software update to the old computer, it has trouble getting back on to the internet. Usually, adjusting access to the Keychain fixes this.
    Now, after a software update last week--I cannot get on the internet with this computer at all. The computer is connected to the network, the password is in the keychain, the signal is strong (all of the other computers can get on to the network)--but whenever I try to get on, I get 'cannot connect to the server'.
    (btw, Last evening, the issue resolved itself for about 3 hours--I don't know why--but today it is out again.) Can anyone help?

    Hi, Rathh. Always use Disk Utility to repair permissions immediately after installing any software update that uses Apple's Installer application, or that is installed by the Software Update function accessed through the Apple Menu.

  • Cannot connect to internet after softqare update

    I have an old powerbook G4 running Mac OS X 10.3.9 (this is one of 3 macs) I also have an airport Extreme and an airport Express to make a network in my home. Frequently, after a software update to the old computer, it has trouble getting back on to the internet. Usually, adjusting access to the Keychain fixes this.
    Now, after a software update last week--I cannot get on the internet with this computer at all. The computer is connected to the network, the password is in the keychain, the signal is strong (all of the other computers can get on to the network)--but whenever I try to get on, I get 'cannot connect to the server'.
    (btw, Last evening, the issue resolved itself for about 3 hours--I don't know why--but today it is out again.) Can anyone help?

    Hi Rathh!
    You might want to repost your question in one of these PowerBook forums (pick which model of the G4 PowerBooks you have):
    Internet, Networking and a PowerBook G4 17-inch
    Internet, Networking and a PowerBook G4 15-inch Aluminum
    Internet, Networking and a PowerBook G4 12-inch
    Internet, Networking and a PowerBook G4 15-inch Titanium
    -Kylene

  • Cannot connect to internet after upgrade from 10.7.4 to 10.7.5

    I have a new iMac and connect to internet with a data card (modem) Huawei E303.
    It worked fine until after the upgrade from 10.7.4 to 10.7.5.
    Now I can connect but there is no measurable signal. Other computers work using the same data card.

    Hi, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    For 10.5/10.6/10.7, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.

  • I cannot connect to internet after I update system.

    Hi,
    I update my system a few day ago (use systemd to replace rc.d) and I cannot connect internet. I guess my router table is broken, but I cannot find any problem.
    I use ping to try some IP. And I find I connect to local machine only.
    Do I miss some configuration ?
    [~]ping -c 3 8.8.8.8
    PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
    --- 8.8.8.8 ping statistics ---
    3 packets transmitted, 0 received, 100% packet loss, time 2000ms
    [~]$ route -n
    Kernel IP routing table
    Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
    0.0.0.0         172.27.13.254   0.0.0.0         UG    204    0        0 eth2
    10.10.12.0      0.0.0.0         255.255.255.0   U     0      0        0 eth1
    172.27.12.0     0.0.0.0         255.255.254.0   U     204    0        0 eth2
    [ ~]$ ping 172.27.13.254
    PING 172.27.13.254 (172.27.13.254) 56(84) bytes of data.
    --- 172.27.13.254 ping statistics ---
    2 packets transmitted, 0 received, 100% packet loss, time 999ms
    [ ~]$ route -n
    Kernel IP routing table
    Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
    0.0.0.0         172.27.13.254   0.0.0.0         UG    204    0        0 eth2
    10.10.12.0      0.0.0.0         255.255.255.0   U     0      0        0 eth1
    172.27.12.0     0.0.0.0         255.255.254.0   U     204    0        0 eth2
    [~]$ ping 172.27.13.254
    PING 172.27.13.254 (172.27.13.254) 56(84) bytes of data.
    --- 172.27.13.254 ping statistics ---
    2 packets transmitted, 0 received, 100% packet loss, time 999ms
    --- 172.27.13.254 ping statistics ---
    41 packets transmitted, 0 received, 100% packet loss, time 40131ms

    Hi,
    I have 2 network interface.
    The eth1 is for test only. It is connected to a 8 port LAN switch, and there are 2 NAS connected to this switch.
    I use eth2 to connect to internet, for example, update system. I try to disable eth1, but it is still not work.
    ip addr
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host
    valid_lft forever preferred_lft forever
    3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:e0:81:27:32:61 brd ff:ff:ff:ff:ff:ff
    inet 10.10.12.50/24 brd 10.10.12.255 scope global eth1
    inet6 fe80::2e0:81ff:fe27:3261/64 scope link
    valid_lft forever preferred_lft forever
    4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:07:e9:01:a1:36 brd ff:ff:ff:ff:ff:ff
    inet 172.27.12.23/23 brd 172.27.13.255 scope global eth2
    inet6 fe80::207:e9ff:fe01:a136/64 scope link
    valid_lft forever preferred_lft forever
    ip link
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN mode DEFAULT
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT qlen 1000
    link/ether 00:e0:81:27:32:60 brd ff:ff:ff:ff:ff:ff
    3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
    link/ether 00:e0:81:27:32:61 brd ff:ff:ff:ff:ff:ff
    4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
    link/ether 00:07:e9:01:a1:36 brd ff:ff:ff:ff:ff:ff
    Last edited by guardkuo (2012-12-22 10:52:35)

  • Cannot connect to internet after downloading itunes 7

    I downloaded itunes 7, sort all my music on to itunes ready to sync my ipod, try to connect to internet but can't, I had to uninstall itunes to get here to ask why this happens. This has happened twice. (Winamp is alot more flexible with the music)

    When you say you can't connect to the internet, do you mean iTunes can't connect but otherwise the internet is OK?
    If so the most likely thing is is a problem with your firewall. To test this briefly disable it and see if iTunes can connect. If it can, you need to reconfigure your firewall to allow the new version of iTunes to access the internet.
    If you don't know how to do this, which firewall are you using?

  • Nokia c3-00 cannot connect to internet after resto...

    after restoring, my phone change, the theme become gray, the communities, ovi store and other features gone. also in the internet other function gone like goto address, the only remain is the home,browser and web services, they are useless coz they cant search internet
    pls help me to fixed my problem return my community in the main menu and home screen

    Hi newbie666,
    It seems strange but can you update your phone?
    This should help.
    Br
    Mahayv

  • Cannot connect to internet after airport firmware upgrade

    I bought a new Airport Extreme Base Station, hooked it up, and it worked just fine. Then it asked for a firmware upgrade, which I installed. Now the base station will not connect to the internet. I've tried re-booting my cable modem, re-starting the base station, etc. No luck. Pending an answer to this question, I re-installed my prior Airport Extreme base station, and it worked just fine. It wants me to do a firmware update, but I'm understandably reluctant.
    Thanks for your help.
    Bob

    Thanks Chris. One of posts in this thread mentioned the possibility of a corrupt file in the operating system. I reloaded 10.7 using a flash drive I made and then did a hard reset of my Airport Extreme. That solved the problem. I hope this helps.
    Don

  • Strong wifi connection but cannot connect to Internet after upgrade to ios5

    After upgrade to ios 5, my iPad 2 connect to the wireless router just fine. However, it take forever to connect to a website. Following suggestion from someone, I switch my router off then on, it work. But after a day, the problem came back. Switch off and on the router solve the problem again..
    This connection problem appear periodically since, it is very annoying.
    Anyone know the reason for this connection problem and any solution?. thanks a lot.
    My iPad 2 work just fine under 4.3.5!

    Forgot to say, my iPhone 4 work just fine after upgrade to iOS 5.

  • After upgrade to ios6 iPad does not accept password to wifi, I cannot connect to internet. Pls help me...

    After upgrade to ios6 iPad does not accept password to wifi, I cannot connect to internet. Pls help me...

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Airport problem-cannot connect to internet since update

    I like many folks here is new to a Mac. I have a iMac intel duel processor. i apparently did this update to 10/4/8 10/2/06. Since then airport does not work and I cannot connect to internet at all. I have talked to Apple customer service but so far no help there. They want me to reinstall disc that came with computer. I also have a new MacBook that has update also. I can set it beside the iMac in my office and it works great. We have a wirelss system in our home and a PC and the MacBook still connect with no problem. Settings on iMac and MacBook look identical to what I can tell. Nothing I try to connect works, rebooting, change some setting. Can anyone offer easy to follow suggestions to a new Mac user. Thanks

    Since it's only the iMac that's having the issue connecting using WPA, we don't need to troubleshoot the router or the other computers.
    I suggest trying the following on the iMac before attempting to reload the previous version of the OS.
    If you use "Preferred Networks," instead of "Automatic" for your "By default, join" setting Location, try the following:
    System Preferences > Network > Show > AirPort > AirPort tab
    - Delete all preferred networks with encryption
    - Add them again after manually connecting
    (Note: It will be faster if you turn on "Automatically add new networks to preferred networks list" under "Options" of the AirPort network connection.)
    If this doesn't work, something might have gone wrong with the update to 10.4.8. I would suggest that you follow the Apple Tech's recommendation and reinstall the previous OS using the installation disk that came with your iMac.

  • I cannot update ios as it says itunes cannot connect to internet, but it is

    Hi everybody, please help me. I've been trying to update my ipad for ages. When i click update it says itunes cannot connect to internet, but it is and it works for iphone and ipod, it's just the ipad. tried with security settings as well, but it doesn't work. did the connectivity test and it says itunes cannot connect to internet...it is connected

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
     Cheers, Tom

  • HT4623 My iPad is not connecting to internet after software update what can i do

    Hi everyone I just update the software 7.0.4 on my iPad 2 and after doing that cannot connect to internet, can somebody tell me
    what to do to correct this issue? Please 

    You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
    Try again to see if the problem persists.
    If yes you can try resetting your Network Settings. Settings > General > Reset > Reset Network Settings. Note that you will have to re-enter all of your WiFI passwords.

  • My macbook pro cannot connect to internet via wifi

    I have a Macbook Pro 2010 OS X 10.8.3.  I cannot connect to internet via wifi (Air por).  My Macbook Pro does not recognize my network and when I select it from the list of network it asks for my network password.  when I type in my password a dialog box gives me timeout error.  Please could anyone help me.  I am using ethernet for my connection at the moment.  Do I need to reset my macbookpro?  if yes, what will happen to my applications and operating system (mountain lion)?
    Monireh

    When you use the Airport utility what happens?
    What is in the System Preferences control panel for Network settings?
    http://www.apple.com/support/airport - there is a forum just for Airport Community
    Airport Express FAQ
    http://support.apple.com/kb/HT1515
    Wi-Fi Setup Considerations
    Things to consider before you begin
    Start with a plan for the physical layout. Depending on whether you have an existing Wi-Fi network, or if you are using your AirPort Express as a standalone Wi-Fi device, there are several options available for you to choose from.
    When using Ethernet, Cat6 cable is recommended.
    The layout you choose should take into account environmental factors such as physical access, location, range, radio frequency interference, etc.
    You will need to consider what AirPort Utility settings to adopt.
    You will need to know whether you are using an AirPort Express (802.11b/g) or an AirPort Express (802.11a/b/g/n).
    If you will be using more than one Wi-Fi base station, it may be helpful to read the article Extending the range of your wireless network by adding additional Wi-Fi base stations.
    AirPort Discussions
    Discuss your AirPort Base Station, Time Capsule and Wi-Fi questions with fellow community members.
    More
    Direct you to the proper forum for MacBook :
    MacBook Series Forumshttps://discussions.apple.com/community/notebooks?view=discussions
    Mac OS X Forums
    https://discussions.apple.com/community/mac_os?view=discussions 
    http://www.apple.com/support/macbookpro

Maybe you are looking for