80g Classic. Many Problems. Help please?

I have had my ipod for 2 and a half years and, untill a month ago, never had a problem. The first problem was my ipod was corrupting songs individualy. Then it started corruting my full libary on my ipod. After that it stopped transfering the songs onto it after it got about half way done the transfer then it would corrupt all of them. Now its a paper weight. It is almost completely full with only 366mb left, and its all corrupt data. I looked it up on google and it says that the itunesDB file is corrupt. Itunes does not recognise it anymore and when I try to manually format it it doesnt work. Please help I'm going insane.

Here's some info about your ipod not showing up in itunes: http://support.apple.com/kb/TS1363
and about restoring in windows: http://support.apple.com/kb/HT1339
Did you try to put it into disk mode to be able to format it before you restore? http://support.apple.com/kb/HT1363
Message was edited by: Ingo2711

Similar Messages

IPhone iOS4 Caused Many Problems, Help Please?

Okay so...
First, I downloaded the software. After 13 hours, it finally finished backing up the phone. Then it started the restore, and had an error. I had to re-restore it around 4 more times for it to work at all. This, of course, was only the beginning of my problems.
I use the TextFree app instead of real texting because I am in Russia and took out my SIM card to avoid getting any charges. In case you are not familiar with it, the app uses internet to text, and worked fine before. I was texting my friend, when all of a sudden, my phone turned off and restarted. I told him this, and he told me that that's one of the three problems people may experience. I didn't mind that occasionally it would restart {although yes, it is very annoying} but now I am facing a new problem. I can't open the Textfree app at all. It crashes every time I open it, and sometimes causes my phone to restart.
Help, anyone?
I know the obvious way to go about this would be to reinstall it...But I really can't afford to lose all the texts on that. I know I'm being silly, but honestly, does anyone know of another way to fix this?
Thanks!

Here's some info about your ipod not showing up in itunes: http://support.apple.com/kb/TS1363
and about restoring in windows: http://support.apple.com/kb/HT1339
Did you try to put it into disk mode to be able to format it before you restore? http://support.apple.com/kb/HT1363
Message was edited by: Ingo2711

80G Classic Battery Problem

Has no-one but me had a problem with the 80g Classic battery running down at helter-skelter speed even when not in use and turned off?
One day everything as normal, next day battery will hold power equivalent to the time to recharge it (kind of 1:1 ratio in and out).
Problem is I don't know if it's a simple battery change solution or if something else has happened. Everything has been turned off, no extras, covers, etc and I've reset it about 20 times. Can a battery go from good to bad so suddenly? The thing is maybe 3 years old and it's had its fair share of use. Hooked up it runs as it always has, but as it stands its now basically non-portable. Don't really want to do a restore as many, many folders have been personalized and I can't see how this would work anyway.......
Please advise if you can. If not cheers anyway and hope no-one gets the same problem.
Dave

One option is something like Griffin Technologies "Tune Juice" ...
http://www.griffintechnology.com/products/tunejuice2
which takes 4xAAA batteries and is $30. You could then use rechargeable AAA batteries in it. Too bad it doesn't take AA batteries since rechargeable AA batteries tend to be easier to find I think. But there are other products out there like this one that will use standard batteries (9-volt, AA, & AAA usually) to hook up to and extend the battery life of an iPod. The advantage of these products is that in a pinch you can grab alkaline batteries at the airport gift shop or a local convenience store.
Just make sure any you look at EXPLICITLY states it will work with the Classic line as the newer iPods tend to be fussy about older chargers and power sources since they make use of the data pins now as well to initiate power and charging vs. the older iPods that only needed to see the two power pins.
Cheers,
Patrick

VIRUS PROBLEMS, HELP PLEASE???

I continue to have messages popping up saying my computer is infected. It wants me to cleanup and I have to register with Mac Shield 2.6. Pronograhic websites keep popping up. Anyone having this problem? Did not have this problem yesterday, but it's here today! There is also a Red Sheild on the top of the toolbar where it shows the time, battery life, etc. Right clicking on the sheild drops down Scan Now, Cleanup, Control Center, Scan, System Info, Settings, About, and Register. A pron site just popped up again! Need help Please!!

Fuony wrote:
The Mac Shield malware can come through Firefox too if you allow it to and you click on it!
Your exactly right, it is possible that if you visit a site and need the scripts to run for something that the malware that uses Javascript is on that site, then your going to be presented with it.
The thing is with the Firefox + NoScript combination defeats alot of the web side trickery the malware authors are using to get the malware to appear in the first place.
Also this "MacDefender" isn't the only malware making the rounds. There are some serious Flash vulnerabilities being hosted on hostile/adult websites that are running scripts for no apparent reason other than to try to infect your machine.
By running all scripts all the time, your computer is in a state as if you tried running across a busy highway blindfolded.
As a lifelong "MacHead" I can understand Apple loyalty, but if Apple isn't cutting the mustard on their browser security, rather place their users security at serious risk for the sake of convenience, then I have to think about using and recommending to others something else that is more secure.
As a example, I surf thousands of web pages a day, some on really nasty sites, yet I haven't seen this "MacDefender" appear on my computer. Even when I purposely visited links that people have submitted that had the malware. (I maintain a couple of bootable clones of my boot drive just in case)

ICloud problems help please!

I have an iPhone 6 and during the setup I must have did something wrong and now I have my old iCloud account on it that I no longer remember the password, security questions, and no longer have the email address to that account. I think I was hacked and my password and security questions changed. I want to log out of iCloud and start using my current iCloud account. I know these are security measures, but how can I get logged out??? My iPhone is having problems since the latest update and now I can't make a call or text. I can't call apple support without a working number HELP Please.

Hello shelbyrecords,
Oh no! That sounds really frustrating. Unfortunately, if iCloud Find my iPhone Activation Lock is enabled on the device we’ll need to gain access to your previous Apple ID account to disable it. Based on the information you have provided, it sounds like you may need a personalized support experience to recover your previous Apple ID:
If you forgot your Apple ID password - Apple Support
http://support.apple.com/en-us/HT201487
Make sure that you’re entering the correct Apple ID. In most cases, your Apple ID is also the primary email address of your Apple ID account. If these steps didn't help you change your password, contact Apple Support.
Thanks,
Matt M.

Soundtrack problems - help please

Help please. I tried doing a send to multi-track project from FCP with the base layer video option and kept getting the 'error sending selection to Soundtrack Pro' message. I did a search and the suggestion is that I have no disk space but I have over 600GB!
Then I tried a send with the full video and the file saved okay. However when I try to open the .stmp file, Soundtrack Pro starts and then freezes. I've tried opening in various ways.
Help please, I just cannot figure this out! What am I doing wrong?

Not sure how much help this is, but since you're having problems with the layout, did you try deleting the layout file? MacintoshHD/users/username/Library/Application Support/Soundtrack Pro/Layouts
BTW, I found a BKiLifeConfiguration.plist in the following path:
MacintoshHD > Library > Application Support > ProApps > Internal Plug-ins > BrowserKit > iLife.bkplugin > Contents > Resources
Do you find it there?

SQL INSERT problem - help please

Hello,
I'm having a problem with INSERT statement.
There is a "ShowFinal.jsp" page, which is a list of candidates who selected from the second
interview. The user picked some candidates from the list and conduct the 3rd interview. After
he check suitable candidates(who are selected from the 3rd interview) from the list , enter
basic salary for every selected candidate, enter date of interview and finally submit the form.
These data should be save into these tables.
FinalSelect(nicNo,date)
EmpSalary(nicNo,basicSal)
In this "ShowFinal.jsp" page, it validates the following conditions using JavaScript.
1) If the user submit the form without checking at least one checkbox, then the system should be
display an alert message ("Please select at least one candidate").
2) If the user submit the form without entering the basic salary of that candidate which was
checked, then the system should be display an alert message ("Please enter basic salary").
These are working well. But my problem is how to wrote the "AddNewFinal.jsp" page to save these
data into the db.
Here is my code which I have wrote. But it points an error.
"AddNewFinal.jsp"
String interviewDate = request.getParameter("date");
String[] value = request.getParameterValues("ChkNicno");
String[] bs = request.getParameterValues("basicSal");
String sql ="INSERT INTO finalselect (nicNo,date) VALUES(?,?)";
String sql2 ="INSERT INTO EmpSalary (nicNo,basicSal) VALUES(?,?)";
for(int i=0; i < value.length; i++){
     String temp = value;
     for(int x=0; x < bs.length; x++){
          String basic = bs[x];
          pstmt2 = connection.prepareStatement(sql2);
          pstmt2.setString(1, temp);
          pstmt2.setString(2, basic);
          int RowCount1= pstmt2.executeUpdate();
     pstmt1 = connection.prepareStatement(sql);
     pstmt1.setString(1, temp);
     pstmt1.setString(2, interviewDate);
     int RowCount= pstmt1.executeUpdate();
Here is the code for "ShowFinal.jsp".
<form name="ShowFinal" method="POST" action="AddNewFinal.jsp" onsubmit="return checkEmpty() &&
ValidateDate();">
<%-- Loop through the list and print each item --%>
<%
     int iCounter = 0; //counter for incremental value
     while (igroups.hasNext()) {
          Selection s = (Selection) igroups.next();
          iCounter+=1; //increment
%>
<tr>
     <td style="background-color:ivory" noWrap width="20">
     <input type="checkbox" name="<%= "ChkNicno" + iCounter %>"
value="<%=s.getNicno()%>"></td>
        <td style="background-color:ivory" noWrap width="39">
             <%= s.getNicno() %> </td>
     <td style="background-color:ivory" noWrap width="174">
          <input type="text" name="<%= "basicSal" + iCounter %>" size="10"> </td>
</tr>
<%
%>
Date of interview<input type="text" name="date" size="17"></td>
<input type="submit" value="APPROVE CANDIDATE" name="B1" style="border: 1px solid #0000FF">
</form>........................................................
Here is the error generated by TOMCAT.
root cause
java.lang.NullPointerException
     at org.apache.jsp.AddNewFinal_jsp._jspService(AddNewFinal_jsp.java:70)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:137)
I have goto the file "AddNewFinal_jsp.java". The line 70 points to the following line.
for(int i=0; i < value.length; i++){ [/b]
Please can someone help me to solve this problem? Please help me to do this task.
Thanks.

Hi Casabianca ,
It is clearly that your problem is not on the database end, more like a servlet/jsp issue.
I will not comment on the javascript portion, but rather the 2 jsps.
a simple way to trace what's go wrong is to check the final result (the html code) of the first jsp (showFinal.jsp), and compare against what is expected by the 2nd jsp (AddNewFinal.jsp). Most browser do provide "view source" on the page visited.
the following code
<input type="checkbox" name="<%= "ChkNicno" + iCounter %>" value="<%=s.getNicno() %>">
<input type="text" name="<%= "basicSal" + iCounter %>"
would likely to be "translated" to html code something as follow:
<input type="checkbox" name=""ChkNicno0" value="nicNo>">
<input type="text" name="basicSal0">
the original code in "AddNewFinal.jsp" using
request.getParameterValues("ChkNicno");
which looking for a none exist http request parameter (sent as "ChkNicno0",etc but look for "ChkNicno"), which has explained before.
the second attempt to use String[] value = request.getParameterValues("ChkNicno" + iCounter); give Cannot resolove symbol :iCounter. because iCounter never defined in the 2nd jsp!
Most of the error message do give clue to cause of error... : )
not too sure on your intension, assume you wish to update only those selected (checked) row to db.
some suggestions:
1) <input type="text" name="ChkNicno" size="10"> </td>...
<input type="text" name="basicSal" size="10"> instead.
then use javascript to based on checked element index (refer to javascript spec for more details), for those index not checked, clear off the correspond index "basicSal" field value.
e.g. ChkNicno[1] is not checked, empty basicSal[1] value before submission.
This will give us only selected rows values.
2) retain the code
String[] value = request.getParameterValues("ChkNicno");
String[] bs = request.getParameterValues("basicSal");at 2nd jsp, as now the http request will pass parameters using "ChkNicno" and "basicSal".
3) some change to the code for optimization
for(int i=0; i < value.length; i++){
     String temp = value;
     for(int x=0; x < bs.length; x++){
          String basic = bs[x];
          pstmt2 = connection.prepareStatement(sql2);
          pstmt2.setString(1, temp);
          pstmt2.setString(2, basic);
          int RowCount1= pstmt2.executeUpdate();
     pstmt1 = connection.prepareStatement(sql);
     pstmt1.setString(1, temp);
     pstmt1.setString(2, interviewDate);
     int RowCount= pstmt1.executeUpdate();
to
pstmt1 = connection.prepareStatement(sql);
pstmt2 = connection.prepareStatement(sql2);
for(int i=0; i < value.length; i++){
     String temp = value;
     for(int x=0; x < bs.length; x++){
          String basic = bs[x];
          pstmt2.setString(1, temp);
          pstmt2.setString(2, basic);
          int RowCount1= pstmt2.executeUpdate();
     pstmt1.setString(1, temp);
     pstmt1.setString(2, interviewDate);
     int RowCount= pstmt1.executeUpdate();
preparestatement created once should be sufficient as we do not change the sql statement throughout the loop.
there are better solutions out there, this just some ideas and suggestions.Do try out if you wish.
Hope it helps. : )

Multiselect problem Help please!!

Hi all,
I am currently using Application Express 3.1.2.00.02 I have developed an online questionnaire with a multiselect list for one of the questions. The problem i am having is that i need each choice to be totaled up separately on the report generated.
My table of answers looks like this:
Column name e.g. (Question 9)
Answer "Dog" "Cat" "Mouse" "Snake" (underneath column name Question 9 depending on what is selected).
The reporting page would look like below:
*(Column Question 9)* Count
Dog 1
Mouse 1
Snake 1
and for the question you could have another respondent who chooses similar of items on the multiselect, so their answer looks like this:
Answer
"Question 9" Dog
"Question 9" Snake
This would then start a new row on the reporting page like below which is not what i want:
*(Column Question 9)* Count
Dog 1
Mouse 1
Snake 1
Dog: Snake 1
But the report should look like this:
*(Column Question 9)* Count
Dog 2
Mouse 1
Snake 2
The current SQLquery i am using is below:
select "QUESTION 9",
count(*) c
from "P1 DQUESTIONNAIRE"
group by "QUESTION 9"
Thanks for your help and suggestions,
'S'

How to make sure your forum post will never be answered:
1) Make sure your subject line is completely meaningless (i.e. HELP PLEASE!) and describes no part of your actual problem
2) State that you are having "a few problems" but make sure to offer no details whatsoever what those problems are or what the symptoms are.
3) Post large volumes of code instead of distilling the problem down to a compact snippet
4) For extra points, make the code hard to read by refusing to make use of the "code" tag.

K8N Neo2-fx Ram problem Help please

I have three ram(2x512MB single sided , 1x1GB double sided). Is there any way I can put them all on the motherboard? When I place them all the computer is not starting and it`s making a "beep" every 2-3 seconds. If i connect the 1GB double sided on the Dimm1(green) and the one 512MB single sided on the Dimm3(green) it`s working properly. Is there any way I can use all my ram at the same time. I`m desperate. Help please... thank you

Quote from: wodahS on 09-November-06, 05:55:17
How can I put my computer facts under any post I am posting? I should make it my signature?
That's the rule mate which you need to gives all your component in details including your PSU and Bios revision so that others can help you! Like what BOSSKILLER say it won't works with 3 DIMMS unless you purhased another 1 GB of RAM then it can solve your problem with 4 DIMMS or else with 2*512MB RAM. Make sure that you've lowered your HT to <=800Mhz as default is 1000Mhz. GD luck.

So many problems! Please help!

HI,
I am a relatively new macbook user, after having used Windows all my life.
Anyway I decided to blow £1900 on a new macbook pro 15" from the online store, and I have not been very happy with the purchase!
Currently, I am on my 2nd Macbook Pro, Apple replaced the first one because I had the following problems,
The macbook is very slow, even without anything installed, things would take ages to complete, files ages to open etc.
Media files would skip constantl, wether it be itunes or youtube. The "Beachball" would appear constatnly aswell.
Activity monitor reported things were ok, I even reinstalled Lion.
Anyway I got this one im yping from now back as a full replacement, and basically the same things are occuring, I can alo see that if im downloading a file and playing music, the download would basically stop, which I think is really strange.
Its just so annoying that my dads 7 year old IBM is more stable!
Do you think I could get a full refund? Its a tad over the 14 days since I received my first one

sgtbash117 wrote:
Currently, I am on my 2nd Macbook Pro, Apple replaced the first one because I had the following problems,
The macbook is very slow, even without anything installed, things would take ages to complete, files ages to open etc.
Media files would skip constantl, wether it be itunes or youtube. The "Beachball" would appear constatnly aswell.
Activity monitor reported things were ok, I even reinstalled Lion.
Anyway I got this one im yping from now back as a full replacement, and basically the same things are occuring, I can alo see that if im downloading a file and playing music, the download would basically stop, which I think is really strange.
The first problem could be explained away with a dead hard drive or something. If second machine is doing the same thing, the chances of a hard drive failure are many times less.
What software have you installed on this machine? Please list everything.

Hi, my iPhone 3GS has many problems. Please help if you can!

Havent had my phone for even a full year yet, been nothing but problems. My iPhone will not ring or notify me when people call yet i get the missed calls on my phone after they call 10 times (which they are normally very frustrated by then). It is hard to hear me sometimes when I talk to others using this phone. I will all of a sudden cut out when they could hear me perfectly clear. Also I will be texting a message and I will type a whole message but it wont show up on the screen and after 2 minutes when it finally does its only part of the message. My camera only opens up some of the time. My switch just doesnt work. When you switch it to silent it wont work unless you hold your finger on the switch. My home button doesnt always work. I will be using an app and all of a sudden my phone will freeze and restart itself. I will lock my phone but it will not actually lock until 2 minutes after i press the button. Sometimes my screen gets stuck in a landscape position even my home screen and lock screen, kinda weird. Oh and i have had the problem recently where I will plug my charger in and it will charge on and off. It will charge and then after a few minutes it will say this charger is not supported and it will go back and forth. So i got a new charger and tried it to see if the problem was the charger and it still did the same thing. There are more little problems but these are the major ones. I know there is a lot but any help or suggestions are welcomed and appreciated! Thank you Oh my phone has also spent most of its time in an otter box so not much damage to my phone. Thanks again!!

Since you are still under Warranty, make appointment with Apple Genius and take iPhone to Apple for resolution of those problems.

My ipod has so many problems right please help!!!!

well yesterday i just took my ipod out of my i home and tryed to play music on my ipod and it just shut off and wouldnt turn back on then that night i plugged it back in my ipod and it worked in the i home. Now this morning i tryed to play music again and it failed once a gain. so no im on the computer trying to restore my ipod and my ipod is now in the restarting phase and it just keeps turning on and off and wont load up. it attempts to start then it just shuts off. and its been doing it for a while now. pleasse help!

If they say the warranty is voided, it's usually better to purchase a new iPod. It costs the same, and your replacement has a new 1 year warranty on it, rather than a 90 day hardware coverage period. But I think you'll have a better chance at the Apple store than you would if you sent it in to their warehouse.
But, if they won't fix it, you can always look into third party repair companies.
http://www.ipodresq.com
http://www.ipodmods.com
Good luck!
CG

Greenhorn with many problems! Please help!!!

1.
How can I place a button in the middle of a form? It doesn't work with align: center
2.
I do have two forms. The first consist of Text and a Select List called BookingNr and Supplement. The second form consist of the Text and the Select List of the first form and additional Textfields. Now, how can I take over the values of BookingNr and Supplement of the first form to the second form?
This is my code in form one:
:P1_BookingNr,:P2_Supplement
&P1_BookingNr.,&P2_Supplement.
After the textfields in form two are my source values of form 1.
What is wrong with that?
3.
How can I generate a form that is based on two tables?
My code:
SELECT v. BOOKINGNR, v. SUPPLEMENTNR, v. ID, r. BOOKINGNR, r. BILLNR
FROM CONTRACT v, BILL r
WHERE v. BOOKINGNR 0 r. BOOKINGNR
After this I cant see any textfields, only my produced buttons are there.
4.
I want to export my SQL-Database in Excel, but when I use CSV there are no columns or rows but only commas between the fields. Like this: Field 1, Field 2, Field 3 etc.
Does anyone has a script to keep the right form of my table in Excell or any solution?
i hope you do understand my english! my native language is german. so sorry for that!!
Thank you guys! This is my last chance to get on with my project in school!
Thanks--thanks--thanks!!!!
Michael

1: create a button displayed among this regions items. You can then position it anywhere on the form by changing the sequence number of the item.
2: the items on form 1 are still available from form 2. But if you want to specifically set the values on form 2 then you create a button to submit the form, call it "next". Create a branch to a new page that is conditional on a request of "NEXT". Make the branch set the form items
set these items P2_SUPPLEMENT,P2_BOOKING_NBR
with these values &P1_SUPPLEMENT,.:P1_BOOKING_NBR.
3:
Create a form with out the wizard. Make items to hold the form values. Make a onload process set the form items
SELECT v. BOOKINGNR, v. SUPPLEMENTNR, v. ID, r. BILLNR
into :P1_BOOKINGNR,:P1_SUPPLEMENTNR,:P1_ID,:P1_BILLNR
FROM CONTRACT v, BILL r
WHERE v. BOOKINGNR = r. BOOKINGNR
Make a on submit process to the insert or update
You query won't work without something else to limit the result to one row. You will need to pass in the PK for the table as a (hidden)item
4: That's what a csv looks like. If you want to load the excel spread sheet into htmldb then use the data workshop to load the data or create a table, and cut and past it.

2nd Generation Ipod Touch Problem- Help please!

Hello,
I have a brand new ipod touch 2nd generation and when I start a podcast, only on occassion, the play icon in the top right corner blinks very rapidly and the podcast does not play at all. It as as though the ipod touch is playing and stopping play of the podcast at very high speeds! When I push the home button, and try to get back into my music list, the same problem occurs. When I hit the home button, the arrow for play is still blinking rapidly and then I have to restart my ipod touch. It is very frustrating as I can't play the podcasts that I have enjoyed on my ipod classic!
Please help me!
Message was edited by: kozomoto

Hi Arran,
Try Resetting Network Settings on the iPhone, go to Settings> General> Reset> Reset Network Settings.
How many characters are in the WEP password? You'll want to use a 5 or 13 character WEP password to improve compatibility with all devices, or switch to WPA2 personal.
http://support.apple.com/kb/HT1344
-Jason

Hibernate-very strange problem, help please

Hi, i got such a strange problem that im sure you ll think im doin crazy talk :) , i dont see why this would happen at all, i have a class called "Package", mapped to a table "package". whenever i do a query on this table using hibernate, even the simplest "find all" kinda of query, hibernate does update on the table b4 doin the query! even more weird, it does the update when the first query on this table happens, it deletes all values of a column (yes only this column); then if i do the same query again, no update at all. however if now i mannuall add those missing values, it does the update again and deletes them! sry its confusing, heres my code and more of wat i done:
The mapping Package.hbm.xml
<hibernate-mapping package="tuition.bo">
<class name="Package" table="package">
<id name="id" column="study_package_id" type="long">
<generator class="sequence"/>
</id>
<property name="name" column="name" not-null="true"/>
<property name="satTiming" column="sat_timing" not-null="false"/>
<property name="satSubjects" column="sat_subjects" not-null="false"/>
<property name="sunTiming" column="sun_timing" not-null="false"/>
<property name="sunSubjects" column="sun_subjects" not-null="false"/>
<set name="classes" inverse="true" cascade="delete-orphan" lazy="true">
<key column="package_id"/>
<one-to-many class="Class"/>
</set>
</class>
</hibernate-mapping>
For example initialy i populated database using hibernate, like this:
package_id, name, sat_timing, sat_subjects, sun_timing, sun_subjects
1 no.1 9-12 business 9-12 law
2 no.2 9-11 business 9-11 law
Then after i populated this database, i did this query:
<b>List res=getHibernateTemplate().find("FROM Package");</b>
and you can see the log file as such: (excerpt)
16:23:06,687 INFO TransactionFactoryFactory:31 - Using default transaction strategy (direct JDBC transactions)
16:23:06,703 INFO TransactionManagerLookupFactory:33 - No TransactionManagerLookup configured (in JTA environment, use of read-write or transactional second-level cache is not recommended)
16:23:09,968 DEBUG JDBCTransaction:46 - begin
16:23:09,968 DEBUG JDBCTransaction:50 - current autocommit status: true
16:23:09,968 DEBUG JDBCTransaction:52 - disabling autocommit
<b>16:23:10,640 DEBUG SQL:324 - select</b> studypacka0_.study_package_id as study1_, studypacka0_.name as name12_, studypacka0_.description as descript3_12_, ....... from _3AT_package studypacka0_
Hibernate: select studypacka0_.study_package_id as study1_, studypacka0_.name as name12_, studypacka0_.description as descript3_12_, studypacka0_.day as day12_, studypacka0_.sat_timing as sat5_12_, studypacka0_.sat_subjects as sat6_12_, .......
16:23:10,734 DEBUG JDBCTransaction:83 - commit
<b>16:23:10,796 DEBUG SQL:324 - update</b> _3AT_package set name=?, description=?, day=?, sat_timing=?, sat_subjects=?, sat_hours=?, sun_timing=?, sun_subjects=?, sun_hours=?, unit_price=?, years_id=?, group_id=? where study_package_id=?
Hibernate: update _3AT_package set name=?, description=?, day=?, sat_timing=?, sat_subjects=?, sat_hours=?, sun_timing=?, sun_subjects=?, sun_hours=?, unit_price=?, years_id=?, group_id=? where study_package_id=?
<b>16:23:10,812 DEBUG SQL:324 - update </b>_3AT_package set name=?, description=?, day=?, sat_timing=?, sat_subjects=?, sat_hours=?, sun_timing=?, sun_subjects=?, sun_hours=?, unit_price=?, years_id=?, group_id=? where study_package_id=?
Hibernate: update _3AT_package set name=?, description=?, day=?, sat_timing=?, sat_subjects=?, sat_hours=?, sun_timing=?, sun_subjects=?, sun_hours=?, unit_price=?, years_id=?, group_id=? where study_package_id=?
<b>16:23:10,812 DEBUG SQL:324 - update</b> _3AT_package set name=?, description=?,
16:23:10,953 DEBUG JDBCTransaction:173 - re-enabling autocommit
16:23:10,953 DEBUG JDBCTransaction:96 - committed JDBC Connection
as you can see, it does update and changed table field values to this:
package_id, name, sat_timing, sat_subjects, sun_timing, sun_subjects
1 no.1 business law
2 no.2 business law
---------- all tiimings are gone. and now if i re-do the same query, there are NO UPDATE operations....howver if i add some values to sat_timing, sun_timing, and re-do the query, very surprisingly, i saw those update operations which delete all timing values again!
im totally lost... i havent changed any config, this doenst happen to my other classes at all but just this one.... any ideas please! even some thought of what may caused this would be great help! thank you!

well i got the setters wrong.... being so stupid i am... sry for creating such a long and massy thread.

Output Problem with my problem help please

Here is the Instruction to the problem:
An interesting problem in number theory is sometimes called the ?necklace problem.? This problem begins with two single-digit numbers. The next number is obtained by adding the first two numbers together and saving only the ones-digit. This process is repeated until the ?necklace? closes by returning to the original two numbers. For example, if the starting numbers are 1 and 8, the output would look like:
18976392134718
and below is my program:
public class Necklace
     public static void main(String[] args)
          int f, s, sum, n, p;
          String first = JOptionPane.showInputDialog ("Enter first number:");
          String second = JOptionPane.showInputDialog ("Enter second number:");
          f = Integer.parseInt (first);
          s = Integer.parseInt (second);
          sum = f + s;
          n = sum % 10;
          p = s;
          while (!(p == f && n ==s))
               sum = n + p;
               p = n;
               n = sum % 10;
          String output = f +""+ s +""+ ++n+"";
          JOptionPane.showMessageDialog (null, output, "Necklace", JOptionPane.INFORMATION_MESSAGE);
My problem is that I don't know or have any idea how to make the output so it will show all the numbers in between, my ouput it only show the first 3 number, 1 8 and 9

My problem is that I don't know or have any idea how to make the output so it will show all the numbers in between, my ouput it only show the first 3 number, 1 8 and 9Hello and welcome to the forum. First and foremost, please use code tags when posting code here so that your code will retain its formatting and thus will be readable -- after all, your goal is to get as many people to read your post and understand your code as possible, right?
To do this, highlight your pasted code (please be sure that it is already formatted when you paste it into the forum; the code tags don't magically format unformatted code) and then press the code button, and your code will have tags.
Another way to do this is to manually place the tags into your code by placing the tag [code] above your pasted code and the tag [code] below your pasted code like so:
[code]
// your code goes here
// notice how the top and bottom tags are different
[/code]For instance, here is your code with tags:
import javax.swing.JOptionPane;
public class Necklace {
   public static void main(String[] args) {
      int f, s, sum, n, p;
      String first = JOptionPane.showInputDialog("Enter first number:");
      String second = JOptionPane.showInputDialog("Enter second number:");
      f = Integer.parseInt(first);
      s = Integer.parseInt(second);
      sum = f + s;
      n = sum % 10;
      p = s;
      while (!(p == f && n == s))
         sum = n + p;
         p = n;
         n = sum % 10;
      String output = f + "" + s + "" + ++n + "";
      JOptionPane.showMessageDialog(null, output, "Necklace",
               JOptionPane.INFORMATION_MESSAGE);
}Next, you can declare your output String before the while loop, and then concatonate a new int on to this inside the loop. Perhaps an even better way is to use a StringBuilder object.

80g Classic. Many Problems. Help please?

Similar Messages

Maybe you are looking for