80GB Vid Disconnect Issue

My 80GB iPod is only 2 weeks old.
I have been using manual download for all songs and pictures since I have two computers.
My library is on my home PC, but I connect at work to play through my computer and to purchase from iTunes (I transfer purchases at night)
Anyway, today when I ejected my iPod, it disappeared from iTunes like normal, but then the Red "Anti" symbol disappeared from my screen but the words "Do not disconnect" stayed on.
So after waiting for an hour (I had a meeting) my iPod was still not ok to disconnect.
I reset (toggle hold, hold down menu and select until I get the apple) 3 times. I time iTunes re-recognized it but said it was corrupt and I needed to restore.
Not ready to do that yet, I reset again and disconnected.
The iPod played fine the whole way home.
Then I connected fine at home, but I cannot disconnect again.
My purchases have been trasferred to my home library and I have exported my playlists (I have many smart lists, so I hope these trasfered)
SO MY QUESTION IS:
I know I need to restore, basically clearing my iPod
Are my smart playlists lost? (They are a pain to build, time consuming)
I spent a considerable amount of time on my second PC while flying to Japan rating songs. These ratings are on the iPod, but not the library.
Can I move my ratings from iPod to computer?
Can I move my smart playlists from iPod to computer?
I hope I can before restoring.
Sorry for the lengthy note, but I want to provide all info for the best response!

OK, so I have done nothing since posting. I have been waiting for a Pro's response before restoring.
I have connected several times to see if anything worked, and guess what...I was able to disconnect (twice in a row), however after it disappears from iTunes, it take close to 3 minues before the iPod goes to the main menu.
So, no restore for now, but my questions still apply (for future reference, and if I cannot disconnect later)
1. Can I copy my ratings from iPod to Library?
2. Can I copy smart playlists from iPod to Library? (these were created on iPod in iTunes, but only appear under my pod when connected)

Similar Messages

Wifi disconnect issue w new Mac

I bought a new Mac about a week ago. Right away I started experiencing wifi disconnect issues. I called customer support line and they had me reset the eprom. I don't recall the key sequence now. The problem went away for a week but has now returned. Is this a hardware quality issue?

right my friend, you know this is not an uncommon issue with mac, all my macs have the same issue (macbook, mac pro, mac mini and older imac), i disconnect the wifi and reconnect to sole the issue. it depends alot on what you have thats goign on around you, if there is a lot of wireless networks in your area then this might cause the issue. i improved this problem using a time machine and set the wireless to 5ghz only - it helped. i also bought an airport express to strengthen the network and touchwood this is a rare problem for me now!
try moving the modem around in case it this - ensure its not on the floor or touching the floor, there are many tips for improving modem connections look on youtube
however the sequence for this is on
http://support.apple.com/kb/HT1379

MACbook Pro/Bluetooth?Disconnect issues with an Apple mouse and keyboard

Well Folks-
The disconnect issue I have with my Macbook Pro using a wireless Apple Keyboard and mouse is BACK. I wiped the hard drive clean and I reinstalled and I updated the O.S. system including purchasiing Lion via the ineternet one by one and the disconnect issue has retuned on Day 4. What else is there left to do? Anyone?

Hi....
Might be corrupted Bluetooth preferences (.plist)
Go to /Library/Preferences
Move the com.apple.Bluetooth.plist file from the Preferences folder to the Trash.
See if that helped. You may need to re, "pair" your devices and the Mac OS X will re geneate a new .plist file for you.
Make sure the batteries are fresh also.

Server Disconnect issue

Hi,
I'm getting this mesage from my server:
A server you are using is no longer available. Do you want to continue trying to contact it?
Click OK to continue trying to contact the server (server name)
Click Disconnect to break the connection. If you disconnect you may lose changes you've saved and any applications you have opened from the server may stop working.
This is a semi-frequent occurrence. Also, we are using a utility called AdmitMac Browser to connect to ur server.
If anyone has this utility and/or gets this disconnect message I would appreciate some input and any way to resolve the issue.
Thanks,
Bob L.
Powermac G5 Mac OS X (10.3.9)

Here is an update - none of these things really worked long term - the issues returned. I switched to Bing for a while which seemed to help but I missed some of the search results from Google.
I cross referenced a search with the disconnect issue and VPN (which I use for work) and found that some had to adjust the MTU in the System Preferences>Network>Advanced under the Hardware tab. Normally it is set for 1500 but I dropped it down to 1400 and it worked better and then finally down to 1300 and haven't had the disconnect issue with Google searches on Safari.
I'll continue to monitor it and if I have any issues I will report back.

WAG120N - Frequent Internet Disconnection Issue

I have bought a Linksys WAG120N few days back & after i got it , i also updated it to the newest firmware from the Linksys site.The Firmware version for my product is , 1.00.12 Annex A.
But i am getting a frequent internet disconnection after installing the Router/Modem.I am not a newbie in this.I have done my CCNP with full marks & currently working in IBM India & i have enough knowledge on how to configure Routers.
I have done the Flashing in the correct process & after Flashing , i did a 30-30-30 Reset as explained in this forum somewhere but the issue is still existing.
I am listing below what i have done so far. :-
1) After getting the Router , i have updated to the newest firmware & Hard-Resetted the Router as explained in this forum.
2) Then i configured the modem with the values from my ISP.I have done it both manually & also tried the Linksys Setup wizard that came on the CD with the Product and the SETUP WIZARD HAS MY ISP ON THE LIST as well.
3) I got the net connected after configuring but only for some time.After that , i am constantly getting disconnected from the Internet no matter what if i use the Wired or the Wireless devices to access the Internet.I tried setting the Router with both wireless Security enabled & disabled.No luck in either cases.Almost all of the time i get a disconnection when the DSL Link is Steady on the WAG120N.So, this should not be a Line problem.Also i can access the Net with my ISP provided Modem.No problems at all.
4) I tried uninstalling the Anti-Virus & the Internet Security program i use which is Symantec Norton Internet Security 2010.No luck.
5) I have Formatted & did a Clean Install of Windows 7 X64 & Windows XP SP3 & tried running the Router on a freshly installed operating system with no other software installed.I tried different Machines , Different Operating Systems , Different Lan Ports.No luck.
6) I deactivated Windows default Firewall & every Power Saving functions of my OS.No luck.
7) Linksys suggested me to visit the Service Center & get a replacement.I did visit the Linksys Authorized Service Center & got a new WAG120N & brought that to my home.I had to pay around 20 USD Taxi Fare as the Service Center is at the remotest part of my city.I wish if Linksys had a Pick-Up & Drop facility which nearly every big companies offer in my place.
8) The new WAG120N did not change anything.The disconnection issue is still existing.
9) There is absolutely NO problem in my ADSL line.I am using a 512kbps ADSL connection & when i use the CHEAPEST Wi-Fi ADSL Modem which has been given by my ISP , i can access Internet just fine , no problems at all either in Wired or the Wireless.So, in this case The Linksys ADSL Router is at fault.
10) I can see the ADSL line Stats with my 20 USD worth of Huawei ( ISP provided ) Modem but the 150 USD worth of Cisco/Linksys WAG120N does not support showing the ADSL Line stats ( or at least the Firmware doesn't support it ) which is unbelievable for a company of caliber like Cisco.
The two most important things every Modem at least should display are :-
1 ) SNR Margin
2 ) Attenuation
These two are absolutely a Must-Have features if you want to see how good your ADSL connection is & i am surprised to see that my cheapest ISP modem does have these but a Cisco product does not. !!!!!!!!
I have called the Linksys support again & they told me that they are Escalating my case to their 2nd Level.
I got a response from their Level 2 Support Person & he asked me to provide information about my case & i had sent him a reply 2 days ago but no reply from him.
And I am NOT the only person with this problem.I do not know Linksys knows this or not but there are several Linksys users who are using this model & are facing the exact same issues as me.
Here are some of them & they have been posted on this community itself :-
1) http://homecommunity.cisco.com/t5/Cable-and-DSL/Wag120n-problem/td-p/300397
2) http://homecommunity.cisco.com/t5/Cable-and-DSL/WAG120N-keeps-disconnected-from-internet/m-p/330870/...
Tell me Sir , what should i do ? Should i sell it & get another brand or Linksys is going to help me to resolve the problem ? I am extremely sorry to say that i feel regretted that i invested my hard earned money into this which just does not want to work at all.I am too much frustrated & not going to buy any Cisco product if my problem does not get solved because i can not bother the disconnection problem as i need to stay connected all the time for my job & also for my personal reasons.It is a shame that i had to pack my Linksys up on the shelves & have to use the cheapest quality Chinese ( No offense ) Modem because at least the connection does not drop here & I can use it for what it is meant to be.
I will be expecting a quick reply from you people & would also hope that you will be able to solve the problem.Also i think the problem is not the Router but the Firmware itself is faulty but i am not sure about that because this is my first Cisco product & frankly speaking I am very much disappointed with it.I would very much like to experience a Cisco product because i thought it is an World Class product in the business.So, please help me resolve this problem.Either Linksys should help me resolve the problem and get me an working product or i would want to get my money back.Thank You.
(Mod note: Edited for guideline compliance.)

Yes but I think Linksys should give me another one which is working right ? Why should i invest in another Router as i just bought it & its already too pricey here.
I need an ADSL Wi-Fi Modem Router & there is only three models avilable here.One is this one which i'm using , WAG120N & the other two are WAG160N & WAG320N & both of them costs more than triple than that of WAG120N.And no one is going to give me a replacement here.I can get the replacement but the same Router.I can not upgrade it without having to buy a whole new router which costs thrice than my current one.
So, i would be highly oblized if Linksys can give me a replacement because only they can replace it with another model but Linksys India customer Care is only suggesting me that they can issue a replacement for the same model & can not give any other model.
I sent my concern to the 2nd Level Technicians but have not received any reply.Feeling helpless at the moment.
My posts are edited & most important parts are being deleted.Please do not edit my post.All i am wanting to get a suggestion for my problem.I do not want to bother you with my problems but the communities are meant mainly for that purpose so that we can help & support each other.
Thank you.

Another speed / disconnection issues thread

Hi all,
I'm getting quite frustrated with getting a problem on my line fixed, that's affecting both broadband and telephone service. This has been going on (on and off) since summer last year.
Using a BT Homehub 2, the connection started dropping quite frequently, and a noise appeared on the phone line - bad enough that I couldn't use it for calls as I couldn't hear what the other person was saying. After multiple telephone engineer visits (about 5 different engineers - it was an intermittent fault, so difficult to trace I believe) they narrowed it down to a section of overhead cable that was rubbing against a tree branch. It took a complaint to BT to actually get this section of cable replaced though. This takes us up to around November last year.
Since then we had a couple of months of reasonably stable service (the noise had all but disappeared and broadband was connected at a regular 2.5mbps). However recently the noise has returned on the phone line and the broadband issues have also come back (regular disconnects and low speed). Some days it disconnects every 10 minutes for a few hours, and some days maybe 5 times in the whole day.
The BT broadband technical support line ran a line test about a week ago and decided they needed to escalate the issue to a Level 2 team (whatever that means). They ran more tests and, following their script, decided that my Homehub was at fault. I didn't agree, but decided to humour them. I have a spare ADSL router, and have swapped the BT homehub out for that, with no resulting difference in connection speed or stability.
I'm currently connected at 576kbps. The ADSL router is connected directly to the test socket, and has been for the last 2 weeks. I have also tried swapping filters. Still no improvement. I called technical support this morning again for an update, and they decided that they wanted to try resetting my IP profile. When I asked them what this would achieve they said that it would fix my speed issue, my disconnection issue, and the noise on my telephone line.
Now this sounds a little bit ambitious to me - I don't see how a simple IP profile reset can fix all these issues, but I'm not a technical expert and so I'm coming to you for advice. Does this sound like a reasonable course of action to you? My view is that there is still a fault somewhere on the line or in the exchange, but they are currently refusing to send out an engineer to run tests from this end, and are telling me I need to wait up to 4 days for the IP profile reset to take effect before they will consider sending one out.
Sorry for the long post - any help or advice much appreciated. Here's some noise stats from the router (not a BT one at the moment, but as I said, it doesn't seem to make any difference which router I use).
Downstream
Upstream
Line Coding(Trellis):
On
On
SNR Margin (0.1 dB):
74
150
Attenuation (0.1 dB):
515
245
Output Power (0.1 dBm):
166
123
Attainable Rate (Kbps):
736
908

Thanks for the quick reply.
I have re-connected the Homehub to the test socket now. The downstream rate seems to have gone way up (this is the first time I've seen a rate this high since I first connected the Homehub to the test socket about two weeks ago). Just goes to show how much speed the connection loses when using internal wiring - as I said, I used to get about 2.5mbps - but that's a different issue.
My disconnection / speed issue is frustratingly intermittent, as swapping between the two different routers hasn't made any difference over the last week, with downstream rates of 1mbps or less, but now that you've asked me to do it, typically it now looks much better. Going on my past experience though it won't hold this rate for very long.
Connection information
Line state
Connected
Connection time
0 days, 0:00:40
Downstream
6,176 Kbps
Upstream
448 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.1
Latency type
Interleaved
Noise margin (Down/Up)
9.0 dB / 18.0 dB
Line attenuation (Down/Up)
42.0 dB / 24.0 dB
Output power (Down/Up)
19.8 dBm / 12.1 dBm
Loss of Framing (Local)
36
Loss of Signal (Local)
54
Loss of Power (Local)
0
FEC Errors (Down/Up)
0 / 0
CRC Errors (Down/Up)
0 / N/A
HEC Errors (Down/Up)
N/A / 0
Error Seconds (Local)
22

Router disconnection issues - only on weekdays

Sky sent me a new Router last week in order to fix the disconnection issues I've been having. I'm having the same problems as I did with my old router. Between 9 am to 6 pm (only on weekdays) - The light is Amber (static, not blinking) and I have to reboot to fix it. It disconnects after a few minutes and the only way to fix it is to reboot is. I've tried other channels 1, 6, 11 for 2 weeks now and even plugged it into the test/BT socket. Nothing seems to fix the problem. Connection speed is decent, but the internet always becomes slow, then disconnects as time decays. I live in Alderley Edge. I don't have these problems on Saturdays and Sundays or anything before 9 am on weekdays. Here are some of the saved log files. Jan 1 00:00:07 syslog: BusyBox v1.17.2
Jan 1 00:00:16 syslog: Line 0: xDSL G.994 training
Jan 1 00:00:33 syslog: Line 0: ADSL G.992 started
Jan 1 00:00:38 syslog: Line 0: ADSL G.992 channel analysis
Jan 1 00:00:44 syslog: Line 0: ADSL G.992 message exchange
Jan 1 00:00:45 syslog: Line 0: ADSL link down
Jan 1 00:00:46 syslog: Line 0: xDSL G.994 training
Jan 1 00:01:03 syslog: Line 0: ADSL G.992 started
Jan 1 00:01:07 syslog: Line 0: ADSL G.992 channel analysis
Jan 1 00:01:14 syslog: Line 0: ADSL G.992 message exchange
Jan 1 00:01:15 syslog: Line 0: ADSL link down
Jan 1 00:01:16 syslog: Line 0: xDSL G.994 training
Jan 1 00:01:33 syslog: Line 0: ADSL G.992 started
Jan 1 00:01:37 syslog: Line 0: ADSL G.992 channel analysis
Jan 1 00:01:44 syslog: Line 0: ADSL G.992 message exchange
Jan 1 00:01:44 syslog: Line 0: ADSL link up, Bearer 0, us=1226, ds=22014
Jan 1 00:01:44 syslog: Line 0: ADSL link up, Bearer 1, us=0, ds=0
Jan 1 00:01:49 syslog: PPP Connection status ERROR_NONE
Jan 1 00:01:49 syslog: PPP LCP UP.
Jan 1 00:01:49 syslog: WAN link UP.
Jan 1 00:01:49 syslog: Received valid IP address from server. Connection UP.
Jan 1 00:01:49 syslog: PPP Connection status ERROR_NONE
Jan 1 00:01:51 syslog: Connection Up. SNO/MAC/IP: [A502155B010722/C03E0F9D7C50/2.220.237.74]
Jan 1 00:01:51 syslog: Send out NTP request to ntp1.isp.sky.com
Jan 1 00:01:51 syslog: Time has been set from ntp1.isp.sky.com
Aug 2 23:30:33 syslog: Received NTP Sync Reply from ntp1.isp.sky.com
Aug 3 08:50:07 syslog: Line 0: ADSL link down
Aug 3 08:50:09 syslog: Clear IP addresses. PPP connection DOWN.
Aug 3 08:50:10 syslog: Line 0: xDSL G.994 training
Aug 3 08:50:26 syslog: Line 0: ADSL G.992 started
Aug 3 08:50:31 syslog: Line 0: ADSL G.992 channel analysis
Aug 3 08:50:37 syslog: Line 0: ADSL G.992 message exchange
Aug 3 08:50:38 syslog: Line 0: ADSL link down
Aug 3 08:50:39 syslog: Line 0: xDSL G.994 training
Aug 3 08:50:56 syslog: Line 0: ADSL G.992 started
Aug 3 08:51:01 syslog: Line 0: ADSL G.992 channel analysis
Aug 3 08:51:07 syslog: Line 0: ADSL G.992 message exchange
Aug 3 08:51:07 syslog: Line 0: ADSL link up, Bearer 0, us=1243, ds=21125
Aug 3 08:51:07 syslog: Line 0: ADSL link up, Bearer 1, us=0, ds=0
Aug 3 08:51:12 syslog: PPP LCP UP.
Aug 3 08:51:12 syslog: PPP Connection status ERROR_NONE
Aug 3 08:51:12 syslog: PPP Connection status ERROR_NONE
Aug 3 08:51:12 syslog: WAN link UP.
Aug 3 08:51:12 syslog: Received valid IP address from server. Connection UP.
Aug 3 08:51:14 syslog: Connection Up. SNO/MAC/IP: [A502155B010722/C03E0F9D7C50/94.2.84.151]
Aug 3 08:51:14 syslog: Send out NTP request to ntp2.isp.sky.com
Aug 3 08:59:12 syslog: PPP Connection status ERROR_UNKNOWN
Aug 3 08:59:12 syslog: Clear IP addresses. PPP connection DOWN.
Aug 3 08:59:14 syslog: PPP Connection status ERROR_UNKNOWN
Aug 3 08:59:14 syslog: PPP Connection status ERROR_ISP_TIME_OUT
Aug 3 09:20:39 syslog: Line 0: ADSL link down
Aug 3 09:20:40 syslog: Line 0: xDSL G.994 training
Aug 3 09:20:57 syslog: Line 0: ADSL G.992 started
Aug 3 09:20:58 syslog: Line 0: ADSL link down
Aug 3 09:21:03 syslog: Line 0: ADSL G.992 started
Aug 3 09:21:05 syslog: Line 0: ADSL link down
Aug 3 09:21:08 syslog: Line 0: xDSL G.994 training
Aug 3 09:21:25 syslog: Line 0: ADSL G.992 started
Aug 3 09:21:29 syslog: Line 0: ADSL G.992 channel analysis
Aug 3 09:21:36 syslog: Line 0: ADSL G.992 message exchange
Aug 3 09:21:37 syslog: Line 0: ADSL link down
Aug 3 09:21:38 syslog: Line 0: xDSL G.994 training
Aug 3 09:21:55 syslog: Line 0: ADSL G.992 started
Aug 3 09:21:59 syslog: Line 0: ADSL G.992 channel analysis
Aug 3 09:22:06 syslog: Line 0: ADSL G.992 message exchange
Aug 3 09:22:06 syslog: Line 0: ADSL link up, Bearer 0, us=1230, ds=20359
Aug 3 09:22:06 syslog: Line 0: ADSL link up, Bearer 1, us=0, ds=0
Aug 3 09:22:11 syslog: PPP LCP UP.
Aug 3 09:22:11 syslog: PPP Connection status ERROR_NONE
Aug 3 09:22:11 syslog: WAN link UP.
Aug 3 09:22:11 syslog: Received valid IP address from server. Connection UP.
Aug 3 09:22:11 syslog: PPP Connection status ERROR_NONE
Aug 3 09:22:13 syslog: Connection Up. SNO/MAC/IP: [A502155B010722/C03E0F9D7C50/90.219.255.32]
Aug 3 09:36:11 syslog: Clear IP addresses. PPP connection DOWN.
Aug 3 09:36:11 syslog: PPP Connection status ERROR_UNKNOWN
Aug 3 09:36:13 syslog: PPP Connection status ERROR_UNKNOWN
Aug 3 09:36:13 syslog: PPP Connection status ERROR_ISP_TIME_OUT
Aug 3 18:16:13 syslog: Line 0: ADSL link down
Aug 3 18:16:18 syslog: Line 0: xDSL G.994 training
Aug 3 18:16:35 syslog: Line 0: ADSL G.992 started
Aug 3 18:16:39 syslog: Line 0: ADSL G.992 channel analysis
Aug 3 18:16:46 syslog: Line 0: ADSL G.992 message exchange
Aug 3 18:16:47 syslog: Line 0: ADSL link down
Aug 3 18:16:48 syslog: Line 0: xDSL G.994 training
Aug 3 18:17:05 syslog: Line 0: ADSL G.992 started
Aug 3 18:17:09 syslog: Line 0: ADSL G.992 channel analysis
Aug 3 18:17:16 syslog: Line 0: ADSL G.992 message exchange
Aug 3 18:17:17 syslog: Line 0: ADSL link up, Bearer 0, us=1239, ds=20409
Aug 3 18:17:17 syslog: Line 0: ADSL link up, Bearer 1, us=0, ds=0
Aug 3 18:17:21 syslog: PPP LCP UP.
Aug 3 18:17:21 syslog: PPP Connection status ERROR_NONE
Aug 3 18:17:21 syslog: WAN link UP.
Aug 3 18:17:21 syslog: Received valid IP address from server. Connection UP.
Aug 3 18:17:21 syslog: PPP Connection status ERROR_NONE
Aug 3 18:17:23 syslog: Connection Up. SNO/MAC/IP: [A502155B010722/C03E0F9D7C50/90.218.89.177]
Aug 3 18:17:23 syslog: Send out NTP request to ntp1.isp.sky.com
Aug 3 18:56:51 syslog: PPP Connection status ERROR_UNKNOWN
Aug 3 18:56:51 syslog: Clear IP addresses. PPP connection DOWN.
Aug 3 18:56:53 syslog: PPP Connection status ERROR_UNKNOWN
Aug 3 18:56:53 syslog: PPP Connection status ERROR_ISP_TIME_OUT
Aug 3 20:01:54 syslog: Line 0: ADSL link down
Aug 3 20:01:58 syslog: Line 0: xDSL G.994 training
Aug 3 20:02:14 syslog: Line 0: ADSL G.992 started
Aug 3 20:02:20 syslog: Line 0: ADSL G.992 channel analysis
Aug 3 20:02:26 syslog: Line 0: ADSL G.992 message exchange
Aug 3 20:02:27 syslog: Line 0: ADSL link down
Aug 3 20:02:28 syslog: Line 0: xDSL G.994 training
Aug 3 20:02:45 syslog: Line 0: ADSL G.992 started
Aug 3 20:02:50 syslog: Line 0: ADSL G.992 channel analysis
Aug 3 20:02:56 syslog: Line 0: ADSL G.992 message exchange
Aug 3 20:02:56 syslog: Line 0: ADSL link up, Bearer 0, us=1243, ds=12211
Aug 3 20:02:56 syslog: Line 0: ADSL link up, Bearer 1, us=0, ds=0
Aug 3 20:03:01 syslog: PPP LCP UP.
Aug 3 20:03:01 syslog: PPP Connection status ERROR_NONE
Aug 3 20:03:01 syslog: WAN link UP.
Aug 3 20:03:01 syslog: Received valid IP address from server. Connection UP.
Aug 3 20:03:01 syslog: PPP Connection status ERROR_NONE
Aug 3 20:03:03 syslog: Connection Up. SNO/MAC/IP: [A502155B010722/C03E0F9D7C50/176.24.169.71] Aug 6 19:11:46 syslog: Line 0: ADSL link down
Aug 6 19:11:47 syslog: Line 0: xDSL G.994 training
Aug 6 19:12:04 syslog: Line 0: ADSL G.992 started
Aug 6 19:12:09 syslog: Line 0: ADSL G.992 channel analysis
Aug 6 19:12:15 syslog: Line 0: ADSL G.992 message exchange
Aug 6 19:12:16 syslog: Line 0: ADSL link up, Bearer 0, us=1040, ds=649
Aug 6 19:12:16 syslog: Line 0: ADSL link up, Bearer 1, us=0, ds=0
Aug 6 19:12:21 syslog: PPP LCP UP.
Aug 6 19:12:21 syslog: PPP Connection status ERROR_NONE
Aug 6 19:12:21 syslog: WAN link UP.
Aug 6 19:12:21 syslog: Received valid IP address from server. Connection UP.
Aug 6 19:12:21 syslog: PPP Connection status ERROR_NONE
Aug 6 19:12:23 syslog: Connection Up. SNO/MAC/IP: [A502155B010722/C03E0F9D7C50/90.214.45.0]
Aug 6 19:19:51 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 19:19:51 syslog: Clear IP addresses. PPP connection DOWN.
Aug 6 19:19:52 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 19:19:52 syslog: PPP Connection status ERROR_ISP_TIME_OUT
Aug 6 19:20:17 syslog: PPP LCP UP.
Aug 6 19:20:17 syslog: PPP Connection status ERROR_NONE
Aug 6 19:20:17 syslog: WAN link UP.
Aug 6 19:20:17 syslog: Received valid IP address from server. Connection UP.
Aug 6 19:20:17 syslog: PPP Connection status ERROR_NONE
Aug 6 19:20:19 syslog: Connection Up. SNO/MAC/IP: [A502155B010722/C03E0F9D7C50/94.10.149.106]
Aug 6 19:25:47 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 19:25:47 syslog: Clear IP addresses. PPP connection DOWN.
Aug 6 19:25:48 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 19:25:48 syslog: PPP Connection status ERROR_ISP_TIME_OUT
Aug 6 19:26:15 syslog: PPP LCP UP.
Aug 6 19:26:15 syslog: PPP Connection status ERROR_NONE
Aug 6 19:26:15 syslog: WAN link UP.
Aug 6 19:26:15 syslog: PPP Connection status ERROR_NONE
Aug 6 19:26:15 syslog: Received valid IP address from server. Connection UP.
Aug 6 19:26:17 syslog: Connection Up. SNO/MAC/IP: [A502155B010722/C03E0F9D7C50/94.8.185.188]
Aug 6 19:29:15 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 19:29:15 syslog: Clear IP addresses. PPP connection DOWN.
Aug 6 19:29:17 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 19:29:17 syslog: PPP Connection status ERROR_ISP_TIME_OUT
Aug 6 19:29:49 syslog: PPP LCP UP.
Aug 6 19:29:49 syslog: PPP Connection status ERROR_NONE
Aug 6 19:29:49 syslog: WAN link UP.
Aug 6 19:29:49 syslog: Received valid IP address from server. Connection UP.
Aug 6 19:29:49 syslog: PPP Connection status ERROR_NONE
Aug 6 19:29:51 syslog: Connection Up. SNO/MAC/IP: [A502155B010722/C03E0F9D7C50/94.2.84.179]
Aug 6 19:33:49 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 19:33:49 syslog: Clear IP addresses. PPP connection DOWN.
Aug 6 19:33:51 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 19:33:51 syslog: PPP Connection status ERROR_ISP_TIME_OUT
Aug 6 19:34:36 syslog: PPP LCP UP.
Aug 6 19:34:36 syslog: PPP Connection status ERROR_NONE
Aug 6 19:34:36 syslog: WAN link UP.
Aug 6 19:34:36 syslog: Received valid IP address from server. Connection UP.
Aug 6 19:34:36 syslog: PPP Connection status ERROR_NONE
Aug 6 19:34:38 syslog: Connection Up. SNO/MAC/IP: [A502155B010722/C03E0F9D7C50/176.27.194.148]
Aug 6 19:34:39 syslog: Clear IP addresses. PPP connection DOWN.
Aug 6 19:34:39 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 19:34:39 syslog: WAN link UP.
Aug 6 19:34:39 syslog: Received valid IP address from server. Connection UP.
Aug 6 19:34:40 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 19:34:41 syslog: PPP Connection status ERROR_NONE
Aug 6 19:34:43 syslog: Connection Up. SNO/MAC/IP: [A502155B010722/C03E0F9D7C50/176.27.194.148]
Aug 6 19:38:36 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 19:38:36 syslog: Clear IP addresses. PPP connection DOWN.
Aug 6 19:38:38 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 19:38:38 syslog: PPP Connection status ERROR_ISP_TIME_OUT
Aug 6 19:39:09 syslog: PPP LCP UP.
Aug 6 19:39:09 syslog: PPP Connection status ERROR_NONE
Aug 6 19:39:09 syslog: WAN link UP.
Aug 6 19:39:09 syslog: Received valid IP address from server. Connection UP.
Aug 6 19:39:09 syslog: PPP Connection status ERROR_NONE
Aug 6 19:39:11 syslog: Connection Up. SNO/MAC/IP: [A502155B010722/C03E0F9D7C50/94.9.207.21]
Aug 6 19:42:09 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 19:42:09 syslog: Clear IP addresses. PPP connection DOWN.
Aug 6 19:42:10 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 19:42:10 syslog: PPP Connection status ERROR_ISP_TIME_OUT
Aug 6 19:42:44 syslog: PPP LCP UP.
Aug 6 19:42:44 syslog: PPP Connection status ERROR_NONE
Aug 6 19:42:44 syslog: PPP Connection status ERROR_NONE
Aug 6 19:42:44 syslog: WAN link UP.
Aug 6 19:42:44 syslog: Received valid IP address from server. Connection UP.
Aug 6 19:42:46 syslog: Connection Up. SNO/MAC/IP: [A502155B010722/C03E0F9D7C50/90.214.204.139]
Aug 6 19:47:44 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 19:47:44 syslog: Clear IP addresses. PPP connection DOWN.
Aug 6 19:47:45 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 19:47:45 syslog: PPP Connection status ERROR_ISP_TIME_OUT
Aug 6 19:48:21 syslog: PPP LCP UP.
Aug 6 19:48:21 syslog: PPP Connection status ERROR_NONE
Aug 6 19:48:21 syslog: WAN link UP.
Aug 6 19:48:21 syslog: Received valid IP address from server. Connection UP.
Aug 6 19:48:21 syslog: PPP Connection status ERROR_NONE
Aug 6 19:48:23 syslog: Connection Up. SNO/MAC/IP: [A502155B010722/C03E0F9D7C50/90.214.204.139]
Aug 6 19:51:21 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 19:51:21 syslog: Clear IP addresses. PPP connection DOWN.
Aug 6 19:51:23 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 19:51:23 syslog: PPP Connection status ERROR_ISP_TIME_OUT
Aug 6 19:51:58 syslog: PPP LCP UP.
Aug 6 19:51:58 syslog: PPP Connection status ERROR_NONE
Aug 6 19:51:58 syslog: WAN link UP.
Aug 6 19:51:58 syslog: Received valid IP address from server. Connection UP.
Aug 6 19:51:58 syslog: PPP Connection status ERROR_NONE
Aug 6 19:52:00 syslog: Connection Up. SNO/MAC/IP: [A502155B010722/C03E0F9D7C50/90.214.204.139]
Aug 6 19:54:58 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 19:54:58 syslog: Clear IP addresses. PPP connection DOWN.
Aug 6 19:55:00 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 19:55:00 syslog: PPP Connection status ERROR_ISP_TIME_OUT
Aug 6 19:55:38 syslog: PPP LCP UP.
Aug 6 19:55:38 syslog: PPP Connection status ERROR_NONE
Aug 6 19:55:38 syslog: WAN link UP.
Aug 6 19:55:38 syslog: Received valid IP address from server. Connection UP.
Aug 6 19:55:38 syslog: PPP Connection status ERROR_NONE
Aug 6 19:55:40 syslog: Connection Up. SNO/MAC/IP: [A502155B010722/C03E0F9D7C50/94.10.149.222]
Aug 6 20:01:08 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 20:01:08 syslog: Clear IP addresses. PPP connection DOWN.
Aug 6 20:01:10 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 20:01:10 syslog: PPP Connection status ERROR_ISP_TIME_OUT
Aug 6 20:01:43 syslog: PPP LCP UP.
Aug 6 20:01:43 syslog: PPP Connection status ERROR_NONE
Aug 6 20:01:43 syslog: WAN link UP.
Aug 6 20:01:43 syslog: Received valid IP address from server. Connection UP.
Aug 6 20:01:43 syslog: PPP Connection status ERROR_NONE
Aug 6 20:01:45 syslog: Connection Up. SNO/MAC/IP: [A502155B010722/C03E0F9D7C50/94.4.248.76]
Aug 6 20:05:13 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 20:05:13 syslog: Clear IP addresses. PPP connection DOWN.
Aug 6 20:05:14 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 20:05:14 syslog: PPP Connection status ERROR_ISP_TIME_OUT
Aug 6 20:05:39 syslog: PPP LCP UP.
Aug 6 20:05:39 syslog: PPP Connection status ERROR_NONE
Aug 6 20:05:48 syslog: WAN link UP.
Aug 6 20:05:48 syslog: Received valid IP address from server. Connection UP.
Aug 6 20:05:48 syslog: PPP Connection status ERROR_NONE
Aug 6 20:05:50 syslog: Connection Up. SNO/MAC/IP: [A502155B010722/C03E0F9D7C50/94.8.176.151]
Aug 6 20:10:39 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 20:10:40 syslog: Clear IP addresses. PPP connection DOWN.
Aug 6 20:10:41 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 20:10:41 syslog: PPP Connection status ERROR_ISP_TIME_OUT
Aug 6 20:11:23 syslog: PPP LCP UP.
Aug 6 20:11:23 syslog: PPP Connection status ERROR_NONE
Aug 6 20:11:23 syslog: WAN link UP.
Aug 6 20:11:23 syslog: PPP Connection status ERROR_NONE
Aug 6 20:11:23 syslog: Received valid IP address from server. Connection UP.
Aug 6 20:11:25 syslog: Connection Up. SNO/MAC/IP: [A502155B010722/C03E0F9D7C50/94.10.135.235]
Aug 6 20:14:23 syslog: Clear IP addresses. PPP connection DOWN.
Aug 6 20:14:23 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 20:14:25 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 20:14:25 syslog: PPP Connection status ERROR_ISP_TIME_OUT
Aug 6 20:15:11 syslog: PPP LCP UP.
Aug 6 20:15:11 syslog: PPP Connection status ERROR_NONE
Aug 6 20:15:11 syslog: WAN link UP.
Aug 6 20:15:11 syslog: Received valid IP address from server. Connection UP.
Aug 6 20:15:11 syslog: PPP Connection status ERROR_NONE
Aug 6 20:15:13 syslog: Connection Up. SNO/MAC/IP: [A502155B010722/C03E0F9D7C50/94.4.246.44]
Aug 6 20:18:11 syslog: Clear IP addresses. PPP connection DOWN.
Aug 6 20:18:11 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 20:18:13 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 20:18:13 syslog: PPP Connection status ERROR_ISP_TIME_OUT
Aug 6 20:18:40 syslog: PPP LCP UP.
Aug 6 20:18:40 syslog: PPP Connection status ERROR_NONE
Aug 6 20:18:40 syslog: WAN link UP.
Aug 6 20:18:40 syslog: PPP Connection status ERROR_NONE
Aug 6 20:18:40 syslog: Received valid IP address from server. Connection UP.
Aug 6 20:18:42 syslog: Connection Up. SNO/MAC/IP: [A502155B010722/C03E0F9D7C50/94.8.182.143]
Aug 6 21:02:40 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 21:02:40 syslog: Clear IP addresses. PPP connection DOWN.
Aug 6 21:02:42 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 21:02:42 syslog: PPP Connection status ERROR_ISP_TIME_OUT
Aug 6 21:03:25 syslog: PPP LCP UP.
Aug 6 21:03:25 syslog: PPP Connection status ERROR_NONE
Aug 6 21:03:25 syslog: WAN link UP.
Aug 6 21:03:25 syslog: PPP Connection status ERROR_NONE
Aug 6 21:03:25 syslog: Received valid IP address from server. Connection UP.
Aug 6 21:03:27 syslog: Connection Up. SNO/MAC/IP: [A502155B010722/C03E0F9D7C50/94.2.85.200]
Aug 6 21:03:27 syslog: Send out NTP request to ntp1.isp.sky.com
Aug 6 21:08:25 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 21:08:25 syslog: Clear IP addresses. PPP connection DOWN.
Aug 6 21:08:27 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 21:08:27 syslog: PPP Connection status ERROR_ISP_TIME_OUT
Aug 6 21:08:57 syslog: PPP LCP UP.
Aug 6 21:08:57 syslog: PPP Connection status ERROR_NONE
Aug 6 21:08:57 syslog: WAN link UP.
Aug 6 21:08:57 syslog: Received valid IP address from server. Connection UP.
Aug 6 21:08:57 syslog: PPP Connection status ERROR_NONE
Aug 6 21:08:59 syslog: Connection Up. SNO/MAC/IP: [A502155B010722/C03E0F9D7C50/94.5.228.51]
Aug 6 21:20:57 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 21:20:57 syslog: Clear IP addresses. PPP connection DOWN.
Aug 6 21:20:58 syslog: PPP Connection status ERROR_UNKNOWN
Aug 6 21:20:58 syslog: PPP Connection status ERROR_ISP_TIME_OUT
Aug 6 21:21:24 syslog: PPP LCP UP.
Aug 6 21:21:24 syslog: PPP Connection status ERROR_NONE
Aug 6 21:21:24 syslog: WAN link UP.
Aug 6 21:21:24 syslog: Received valid IP address from server. Connection UP.
Aug 6 21:21:24 syslog: PPP Connection status ERROR_NONE
Aug 6 21:21:26 syslog: Connection Up. SNO/MAC/IP: [A502155B010722/C03E0F9D7C50/2.221.186.95]Just before I made this post I had to reboot from the router maintenance page at 192.168.0.1 Jan 1 00:00:07 syslog: BusyBox v1.17.2
Jan 1 00:00:17 syslog: Line 0: xDSL G.994 training
Jan 1 00:00:34 syslog: Line 0: ADSL G.992 started
Jan 1 00:00:38 syslog: Line 0: ADSL G.992 channel analysis
Jan 1 00:00:45 syslog: Line 0: ADSL G.992 message exchange
Jan 1 00:00:46 syslog: Line 0: ADSL link down
Jan 1 00:00:47 syslog: Line 0: xDSL G.994 training
Jan 1 00:01:04 syslog: Line 0: ADSL G.992 started
Jan 1 00:01:08 syslog: Line 0: ADSL G.992 channel analysis
Jan 1 00:01:14 syslog: Line 0: ADSL G.992 message exchange
Jan 1 00:01:15 syslog: Line 0: ADSL link up, Bearer 0, us=1252, ds=20885
Jan 1 00:01:15 syslog: Line 0: ADSL link up, Bearer 1, us=0, ds=0
Jan 1 00:01:23 syslog: PPP Connection status ERROR_NONE
Jan 1 00:01:23 syslog: PPP LCP UP.
Jan 1 00:01:23 syslog: WAN link UP.
Jan 1 00:01:23 syslog: Received valid IP address from server. Connection UP.
Jan 1 00:01:23 syslog: PPP Connection status ERROR_NONE
Jan 1 00:01:25 syslog: Connection Up. SNO/MAC/IP: [A502155B010722/C03E0F9D7C50/94.8.190.248]
Jan 1 00:01:26 syslog: Send out NTP request to ntp1.isp.sky.com
Jan 1 00:01:26 syslog: Time has been set from ntp1.isp.sky.com
Aug 7 10:28:07 syslog: Received NTP Sync Reply from ntp1.isp.sky.com

If this is only happening on weekdays between 9 and 6pm it is very likely REIN interference. This could be from a factory, school or business that closes at the weekend. The only way to get it fixed is to get Sky to send out a REIN trained engineer and as they have to do this through BTO, it is more than difficult. This could probably be fixed by fitting an RF3 filter, which should be done by BTO but many do themselves.

Audio on Facetime vidéo issues (MBP Retina)

Hi,
I am having an issue on my Macbook Pro Retina 13.
When i call a friend on vidéo using Facetime, this friend can see me and hear me.
But during the conversation my voice sundenly kind of mute off some seconds then it is back.
If I quit Factetime and call this same friend right away (using my same wifi network) i have no audio issues.
Any idea?

OK so i've isolated the display issue - it appears to be related to 'hot swapping' - if i boot the macbook in windows (from off) with the display already connected, it works fine with no problem. However, if i connect the display after it's booted, or disconnect and reconnect the display, the problems return.
I'm guessing this is related to the fact i'm using a thunderbolt port, and it's not hot pluggable in my version of the mac - Thunderbolt ports and displays: Frequently asked questions (FAQ) - Apple Support
however i'm a bit annoyed as it's not a thunderbolt display - it's a displayport display. I know windows starts up quickly but it's still a pain to have to reboot every time i want to connect a display.
Anyone any thoughts on this or the trackpad issue?

CME 8.6 Call Disconnect Issue

Hi All -
My company has a small CME deployment in Australia and yesterday the local network resource made some changes to the network related to other work but following their changes, a very weird problem is occuring on the system.
The site has 4 POTS lines coming in on a VIC-4FXO card and when calls come in, the IP phones ring but as soon as they try to answer the call disconnects. I was suspecting a codec negotiation issue but since the call is coming from the PSTN, I'm not real sure because it should be G.711 which the IP phones should handle fine.
my ccapi debugs show the call disconnecting with the typical 16 cause code (normal clearing). I can provide any part of the config or debug output required for some ideas.....
I appreciate the help.
Tom

Hey Paolo,
I am facing the same issue but only with a single user.
Using ISDN2e (bri). She answers the call and it disconnects, can you please shine some light please
Please rate the post
Shibly Ibrahim

Lenovo H535 Desktop Win 8.1 USB 3.0 Disconnecting Issue

OK. I just bought this Lenovo H535 desktop in early September and this OS has been driving me CRAZY. After spending well over a month and performing maybe 7 clean installations, I'm trying to get this stupid & worthless operating system to work correctly, I'm left with one issue(that I know of) I cannot resolve.
Now that I've upgraded Win 8.1 core (clean install from RTM iso), my USB 3.0 external Fantom Greendrive is disconnecting on it's own. In Windows 8, it stays connected FOR EVER, but in Windows 8.1, I'm having issues. Of course the drive is plugged into the back of the PC and I've tried each of the USB 3.0 ports. One thing I can tell you is, this USB 3.0 device disconnects at the same exact time each time..... NOT RANDOMLY. Disconnects that the same time provided I don't change any of the PC's hardware settings. And I'm now troubleshooting this isse on a freshly installed system:
Normally the Fantom HD disconnects in 7 min 15 sec. I have tried:
Disabling the USB Selective Suspend in the Power Options - Doesn't work. USB 3.0 disconnects in 7 min 15 sec.
Also disabled the HD from sleeping also in the same panel.- Doesn't work. USB 3.0 disconnects in 7 min 15 sec..
Regardless of what I'm doing on the computer in the background, it always disconnects at the same exact time.
Tried disabling the Power service all together(no power options.) - USB 3.0 disconnects in 22 min 45 sec.
I turn Power Service back on and disabled about 10 uneeded services - USB 3.0 disconnects in 7 min 15 sec..
OK, after installing ANOTHER fresh install of Win 8.1, and installing the Windows Updates, BUT this time I have installed ALL updated device drivers from the Lenovo support site for Win 8.1 Even though most devices were running ok with MS generic drivers. I thought that the installation of a new Chipset Driver and USB Filter Driver would fix the issue. Nope. I GET THE SAME DARN DISCONNECTING.
Conclusion. In Windows 8 Core, the USB 3.0 external Fantom HD stays connected for EVER but in Win 8.1 core- it's disconnecting. That leads me to believe that Windows 8.1 core has some bugs. With my limited experience, it seems that there is NOT physical power shortage. but a Windows 8.1 bug. (works good in windows 8) Another thing that may be related is with Win 8.1, the PC will not go to sleep. Sleeping issues is defitely a bug
Everyone on most sites I've read said to install the chipset drivers and it will work fine. Well, with me, everything is the exception.
Can the Fantom HD disonnecting on it's own all the time, corrupt anything on it?
Does anyone have any resolve or any additional info on this???? I really would appreciate it. I kind of like Win 8.1 better than 8 because it's the lesser of 2 evils. Oh, I'm glad to a member in the forum

Hello again. I found the solution!! Simplly clean installing Windows 7pro and getting rid of Windows 8 did the trick. the USB 3.0 hard drive stays connected as long as I like. The 3.0 speeds are great also. It's a shame I bought Windows 8 on a pre-installed system, but I'm never gonna use it. I like the fact that Lenovo provided the Windows 7 Drivers on the support website for my H535 which gave me the opportunity to install OEM and AMD drivers as opposed to microsoft generic drivers.
Now I need to find a product key. I don't know where to look or if any product key work work. Would buying a Retail box work? Seems like overkill just for a key. Can I buy a downloadable product product key for a cheaper price? Thanks
To add: I found out that the Windows 7 pro x64 retail boxes (DVD, COA, KEY) are about $130-$140. I don't think I want to buy a key without the COA which is proof that your key is authentic.

QOSMIO X500-12D - webcam, bluetooth and fingerprint disconnection issues

Hello,
I still got no solution for this problem. I already did a clean install of Win 7 x64 but still no luck. The devices still keeping disconnecting and I have to reboot to resolve. (this is bad since I normaly using a bluetooth keyboard)
Further this Problem seems not only to occour if system goes 'idle' since my bluetooth keyboard was disconnected during typing. (whatever 'idle' means).
Sometimes I was able to recover at least the Bluetooth connection by turn it off and on again within the Toshiba Bluetooth Stack, sometimes with the HW switch (which also deactivates the WLAN) and sometimes only a reboot helped.
It seems that all three devices (Bluetooth, Webcam, Fingerprintsensor) are connected to the same integrated USB root hub within the system.
After my last test, everything was working before I left the system during a nightly copy operation of a 'few' gig, I come back after ~4 hours and all devices were disconnected (HW not installed) --> I checked in the device manager (see [http://support.microsoft.com/kb/241257] to show devices which are not connected and in the computermanagement right click device manager -> View -> Show hidden devices) all 3 devices shown as 'not connected'.
I already opened a case at support and they told me to update the bios. (when I opened the call the tests were done with the latest bios available)
Nevertheless, I also had a small talk with the support and they told me to restore the system from the recovery DVD's and check if the problem persists after the restore of the 'certified' image (drivers and so on). If it still persists they will do a HW repair. (change mainboard or whatever)
*AGAIN... is there still NO solution out there? I have searched the web and found many people with the same issues. (X500 owners and others)*
_What did i tried:_
- different hotfixes as described at [http://aps2.toshiba-tro.de/kb0/TSB0402UQ0001R01.htm] and [http://aps2.toshiba-tro.de/kb0/FAQ0402UC0001R01.htm] ([http://support.microsoft.com/kb/978258])
- right now I am using [http://support.microsoft.com/kb/981214] since the build numbers of the files are higher than in the hotfix mentioned above and therefor this hotfix should also resolve the problem described in [http://support.microsoft.com/kb/978258]. (and I am using an USB audio device)
- I also tried to disable different things of the power management (e.g. disabled usb selective suspending)
Modell QOSMIO X500-12D
Partnumber PQX33E-030009GR
BS-Version Microsoft Windows 7 Ultimate 6.1.7600 x64
BIOS-Version V2.60
CPU Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz
RAM 4096MB RAM {color:#ff0000}(<- Toshiba Tools reports wrong RAM size, 6GB installed)
{color}HD Size 499,685,253,120 [Byte] 465.368 [GB]
Video NVIDIA GeForce GTS 360M Version=8.17.12.5896
Screen Resolution 1920 x 1080

HI,
It seems that I have found a solution for this problem.
If you have read my first post exactly you should have read that i already disabled the selective USB suspend.
I have connected 2 external USB hubs which are powered by an AC/DC adapter. On this USB hubs I have connected varios USB devices...7.1 USB Headset, external HDD's, PDA, Card Reader, PKI device, USB Sticks, etc.
Nevertheless, I also disabled the the Powermanagement settings on all devices which were involved and where it is possible.
To do this goto the device manager --> right click --> View --> show devices by connection.
Now locate your bluetooth, webcam and fingerprint device. (be carefull names might be different because of different drivers!)
Should be under ACPI x64-based PC --> PCI-Bus --> Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller --> {color:#ff0000}*USB-Root-Hub*{color} --> {color:#ff0000}*Generic USB Hub*{color} -->
There you should find all integrated devices which are troublemaker:
* {color:#ff0000}*AuthenTec Inc. AES2550*{color}
* Bluetooth USB Controller-7 from TOSHIBA
* USB-Webcam
Now double click every device in this 'chain' and locate the powermanagement TAB. (Please note that NOT all devices in this chain do have a powermanagement tab and cannot be configured....that's ok)
On the power management tab uncheck 'Allow the computer to turn off this device to save power' and click OK.
I have done this for all devices which are {color:#ff0000}*marked red in the chain above*{color}. (_I also deactivated the USB selective suspend in the used powermanagement plan!)_
It seems to work now....until now no more bluetooth problem or devices which were gone. It might be that it is enough to disable the Power saving settings only on one or two devices, but right now i had no time to test.
Please also keep in mind that I am using the latest Intel Chipset driver, latest Toshiba drivers and installed the Microsoft hotfixes described in my first post in this thread!
It would be very nice if some people can try and post here if it works!
Regards

N80 bluetooth disconnecting issue

I am unable to use my bluetooth gps with N80. It disconnects the bt connection about once in 5 minutes.
I've read some forums and it seems that others are also experiencing similar bug in N80 (bt headsets and gps's)
My firmware is 3.0617.0.6
I'm using Navicore software and disconnecting happens both with location api and direct bluetooth connections. This (using location api) makes me believe, it is operating system issue and not Navicore.
I'm waiting for an upgraded firmware. When will it be released and is this bug known/fixed?

Hi there, I had problems with the bluetooth too. I have the same firmware as you and was having problems with a headset. I took it to Phoneland and although there is no new firmware at the moment there is a service upgrade (Bluetoothe, Wi-Fi etc)which fixed the problem with the headset. Maybe you need to get yours done too. Just tell them your having trouble with bluetooth and they will have a look. It's free too as long as it's still under warranty. Hope this helps.
Is that an N95 in your pocket or are you just pleased to see me?!?
Life's too important to take seriously.
Nokias I've owned 3210, 3310, 6100, 7650, 6600, 6680, 6630, N80, N95
I'm a 26 year old boy BTW

Bluetooth and Plantronics Legacy random disconnect issues

I've been using the latest MAXX with the latest Plantronics Legacy headset. Randomly, bluetooth will disconnect, the call will remain active but does not automatically failover to either handset or speaker option (literally the call is active and I'm in limbo). The only way to reengage with the caller is to press speaker, then to make matters worse, the phone will start cycling through headset, bluetooth, speaker etc. until the call ends! When I recycle the phone and bluetooth the problem goes away, then reappears randomly (days or a week later). Anyone having this issue? Any sense on it being related to the phone or bluetooth? I've installed the latest drivers for both and I'm now going to cycle the phone daily in the event it's a caching issue somewhen in between the OS's. Either way, Motorola or Plantronics need to make a better thing...

Hello DCJW,
Bluetooth headsets are a great way to communicate, especially while on the go. It will be my pleasure to assist with getting your Plantronics earpiece to work properly. First, may I ask is there any physical or liquid damage on the Bluetooth or the Droid Maxx? Also, what software and android version do you have installed on the Maxx? Can I assume that the Plantronics Bluetooth earpiece is the only Bluetooth device profile that’s connected to the Maxx? I would suggest unpairing the earpiece from the phone, then reboot the device, and re-pair the earpiece. Once you have done so then please retest an post your findings. I’m looking forward to your reply.
Thank you…
ArnettH_VZW
Follow us on Twitter @VZWSupport

Wrt600n / wpc600n random disconnect issues

hi,
i've been running the new AP / cards for a few weeks now, and am seeing some weird behavior on them.
when connected to the AP using either vista (using windows to manage wireless setting), or in xp (using the linksys utility), i'm getting random disconnects. the wireless connection will just drop from 1-10 seconds, then reconnect on it's own.
for these connections, i am forcing the AP and cards to use the n band.
the AP is set to N mode only, and all other settings on the AP are set to Auto. the clients are using all default settings as well, and this issues occurs during web surfing, email, etc. and is repeatable.
any suggestions?
Message Edited by d-rick on 01-20-2008 09:50 AM

r u using the linksys adaptor on vista or on xp
if ur using it on vista
please download the drivers for vista from
www.linksys.com/vista
live life king size

Vid card issues I think??

Good day, I'm having some major issues with my card "I think"
When playing MOH Pacific Assault, Battlefield Vietnam, and Doom3 my sys locks up and/or I get major video corruption. I have tried updating all of the drivers forward and backward and no luck . One error that I get says that the Vid card got stuck in a loop. I have gone to the Nvida and EA site and no help. The only thing that I found was that their is a known issue with MOB running with Nforce 3 chips and to uninstall the GART driver "No idea how???" Here is the post on that, some of it doesn't apply (ATI, Punk Buster,
"This combination of hardware has been reported to freeze gameplay, and is due to a combination of these hardware elements. Resolving this issue has become a stalemate between ATI, Nvidia and Evenbalance. Here is some information which may help you address this issue:
Problem does not occur on non-Punkbuster servers.
This problem seems specific to WinXP.
Removal of the Nvidia GART Driver clears this problem up.
Reverting to ATI's 3.9 seems to clear this up for some.
Reducing the AGP aperture size reduces the amount of delay.
Decreasing the PB scan frequency with pb_sleep decreases the frequency of the freezes.
Changing from an ATI to Nvidia card seems to have eliminated problems for many users."
Any idaes???? Thanks..

Quote from: MrBigA on 11-February-05, 22:55:20
Hi,
I wouldn't remove the GART driver. I have a NF3/6800 Ultra OC setup and I disabled fastwrites in my system bios to resolve loops and freezes. The combo works wonders now!
Good Luck,
You want to try the easiest solutions first and turning off fast writes would be a good place to start as suggested. If it is not implemented properly it can cause instability.
There are also a few other settings that should be in there you can try messing with such as AGP Aperture, 4X or 8X...etc.
I also would use 3DMark 2001 as a stability test. It pretty much runs with every video card and drivers out there. Using a game might not be a good idea because a lot of games have problems with certain drivers or certain cards. At least if it passed 3DMark you would have some idea its not the drivers, card or even gart.
If it doesn't pass 3DMark then I would start looking at your motherboard drivers (GART). The chance of 3DMark not working with any version of Nvidia drivers is very slim unless they are corrupted.
To uninstall the GART you would go into device manager and right click it and uninstall. Windows will restart and try to install drivers on it's own. You can cancel it by clicking on the icon in the system tray if your quick enough. (WinXP)
Another way to do it, is just updating the drivers by again going into device manager, right clicking and this time picking update drivers.
You should have the drivers you want to use on the computer somewhere like maybe the desktop.
Another thing you can try is reinstaling DirectX, that is one of those easy things that doesn't hurt anything to try. Also make sure your video card is not overheating in the case. Open the case and have a house fan blowing on it while you try 3DMark or playing a game.
One last thing when you look in device manager the GART might not be listed as GART, at least on my NF7-S it is not listed that way. The GART would be anything related to AGP under "System Devices"

80GB Vid Disconnect Issue

Similar Messages

Maybe you are looking for