80GB will not load more than 2GB

My 80GB iPod will not load more than 2GB of music, and iTunes freezes when I try to delete anything.

If it wasn't an iPod and just a hard drive I'd say the partition/file table or MBR is messed up or corrupted. The general way to fix that would be to reformat the hard drive or maybe even a "low-level format"... but I'm not sure if that's possibe on an iPod as you'd have to reinstall the iPod software after that I would think and I'm not sure how easy or possible that is.
I'm not sure what the "5 Rs" are but does it include uninstalling and reinstalling iTunes?
Also, sometimes doing a combination of things works when doing only one at a time doesn't... ie, have you restored the iPod and reinstalled iTunes? If you can restore the iPod from another iTunes install on another computer and unintall/reinstall iTunes on your PC?
Just guessing and tossing ideas... sorry Apple didn't help you. Did they try to place MORE than 2GB on your iPod? I wonder if they only tried to place a file or two and found it to "work".

Similar Messages

K5400 will not print more than one page at a time.

The K5400 Office Jet Pro will not print more than one at a time when I change the number of pages to print in Printing Preferences. I have downloaded all the updates available and have tried many times.
Using a Windows XP SP3 computer.
Thank you, Marion

Hi,
The HP Deskjet 1050 All In One can perform multiple copies at a time. To perform a multiple copy, press the Copy Black or Copy Color button as many times as the copy is required. A maximum of 10 copies can be performed at a time.
Please open the link below which illustrates the same.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02459739&tmp_task=prodinfoCategory&lc=en&dlc=en...
If the issue persists then, please perform the steps as shown below and check the copying function again.
Steps to perform a reset.
Press the Power button ( ) to turn off the product.
NOTE: The product might not turn off after pressing the Power button. Continue to the next step regardless.
Disconnect the power cord from the rear of the product.
Disconnect the power cord from the electrical outlet.
Wait 30 seconds.
Reconnect the power cord to the electrical outlet.
Reconnect the power cord to the rear of the product.
Press the Power button ( ) to turn on the product.
Connect the unit directly to a wall outlet.
Check the copying function now.
I hope this resolves the issue, if the error persists then please get back to us.

My mac will not copy more than one file at a time and gets locked up if the file is too large, my mac will not copy more than one file at a time and gets locked up if the file is too large

my mac will not copy more than one file at a time and gets locked up if the file is too large, my mac will not copy more than one file at a time and gets locked up if the file is too large

So now that you have repeated the same thing three times that doesn't make things any clearer at all.
You are copying files from where to where?
How are you attempting to copy files, software or click and drag?
Any other detail would be helpful.
Allan

My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time.

My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time. This is especially disconcerting at Christmas time when you're trying to get Christmas letters in the mail! Any help?

The cyan portion of the printhead may be clogged. I would suggest running the diagnostics shown here. If three levels of cleaning of the printheads does not resolve the issue you may need a new printhead.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Hp 1050 will not print more than one copy at a time

hp 1050 will not print more than one copy at a time

Hi,
The HP Deskjet 1050 All In One can perform multiple copies at a time. To perform a multiple copy, press the Copy Black or Copy Color button as many times as the copy is required. A maximum of 10 copies can be performed at a time.
Please open the link below which illustrates the same.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02459739&tmp_task=prodinfoCategory&lc=en&dlc=en...
If the issue persists then, please perform the steps as shown below and check the copying function again.
Steps to perform a reset.
Press the Power button ( ) to turn off the product.
NOTE: The product might not turn off after pressing the Power button. Continue to the next step regardless.
Disconnect the power cord from the rear of the product.
Disconnect the power cord from the electrical outlet.
Wait 30 seconds.
Reconnect the power cord to the electrical outlet.
Reconnect the power cord to the rear of the product.
Press the Power button ( ) to turn on the product.
Connect the unit directly to a wall outlet.
Check the copying function now.
I hope this resolves the issue, if the error persists then please get back to us.

Yahoo mail will not, "Load More Messages" on iPhone 3gs

When I go into my Yahoo mail account using the iPhone's mail app, scroll down to the bottom of my list in my inbox, and press the, "Load More Messages" button it will not load more. It's really making me upset. Anyone else having this problem? I have more messages to load but it just refuses to load them. Please help!
Thanks alot.

Hey Alan thanks again for the advice but what you suggested did not help/work. On my Yahoo account there is still and option to load more messages, but when I push it, it sadly still fails to load anymore messages. Question? Do the messages have to be unread for them to load? This is really starting to bug me because I can't go back and look at my old emails.
Also with my hotmail account it still will not even give me the option to load more messages. It's really frustrating.
And a final note: I tried to add my yahoo account on my wife's iPhone and it behaved exactly the same way (meaning it would give me the option to load more messages but when I asked it to, none would load)
Sad face.

Flash lite loadmovie is not loading more than 5 jpeg images

Hi,
I am working on flash lite 2.0 for last few days. I am facing
a big problem when using duplicatemovieclip and loading jpg images
on these movieclips. It is showing an error that "it can not load
more than 5 images on one frame on one click "
I don't find any solutions for this. Please help
Regards ,
Gunjan

why not load them sequentially using preloader code?

MSI MS-7200 945G Express will not recognize more than 3 GB

Hello, I just got the MSI board with the Intel 945G chipset, I put in 4x1 GB sticks of RAM, but the BIOS and Windows will not recognize more than 3 GB even though in the specs it says it supports 4 GB. When I use 3 Sticks, the RAM the BIOS displays is 3072MB, with 4 sticks, it displays 3196 MB. I upgraded to the latest BIOS and drivers. Am I missing something? or is this the way it supposed to be?
Thanks

You need to use XP 64 bit to have it recognize more than 3-3.5 gigs.
Windows xp home and pro are 32 bit limited. They can see only 3.5 gigs even though you really have 4. You also will only be able to allocate a max of 2 gigs per process in windows xp home and xp pro.
To beable to see 4 gigs, and alocate more than 2 gigs per proccess you have to run a 64 bit OS. IE windows xp pro 64bit version or windows server 2003 64 bit version.(same thing).

Firefox will not open more than one window and upon restarting will not open the previous tab and refuses to open bookmarks

Firefox does not open more than one window. I can open plenty of tabs, but not more than one window. Upon closing firefox and trying to restart the browser will not open and needs to be closed through windows task manager. Upon trying to re-open Firefox I receive the 'oops this is embarassing , firefox cannot re-open your tabs" message. When I click on "new session" the bookmarks do not load. It is becoming very frustrating as I am a student and often do lots of research on the web while using lots of open windows.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
See also "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]

HD-DVD created with DVDSP will not use more than one subtitle track

I have made an HD-DVD with DVD Studio Pro 4.1.2, and added 4 subtitle tracks. When I play the dvd on a Toshiba A1, Apples DVD player and in the emulator I can change the subtitle track in the way that I can see the country code is changing, but no matter what it will only show me the subtitles from the first subtitle track. If I try to change the subtitle track using the remote, I can only turn the first subtitle track on and of, not switch between the different subtitle tracks. I'm a skilled dvd author, and have had several other authors look into the project finding no errors in my programming, so could this be a bug in DVD SP? Does it not allow more than one subtitle track?

Could be a bug in DVDSP. Also could be a bug in the players firmware. DVDSP never really made it has a fully functional HD DVD authoring tool.

Have Revel Premium but will not allow more than 2g of photos...not showing unlimited Gigs...How to Access unlimited Gigs?

Have Revel Premium..but still not allowed more than 2gigs of photos...How to access unlimited Gigs of Revel Premium?

Hi Dale
If you are signed in using the same email ID that I see here, you should have unlimited photo uploads. It shouldn't be required to uninstall and reinstall the app, but since I can't explain your trouble, it seems reasonable to try that. First, be sure that your photos are safely backed up outside of Revel, eg., to an external USB drive. If your photos are already uploaded to Revel, also be sure that you can access them at www.adoberevel.com
The best way to delete the app and clear the app cache is to long-click on Adobe Revel in Mac's Launchpad view. In Launchpad, long-clicking an app should show a tiny 'X' button, which will remove the app.
If the problem persists, can you send me a screen shot of your account details in the app settings?

Apple tv will not stream more than one song maybe two

Playing through apple TV. One or two songs play then the next comes up but will not load. Shows the album art and song etc. but the little load symbol just spins. Have restarted both airport and apple tv no luck getting past one or two songs? Any idea?

Hi frankie pancakes,
Thanks for visiting Apple Support Communities.
You may find some of the additional troubleshooting tips in this article helpful:
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS4546
Best,
Jeremy

LaserJet 5000 will not print more than one copy at a time.

We have recently moved our office. A LaserJet 5000 which is used as an office printer is shared through one of the computers on the network in the exact same way it was more we moved. But since the move it will not print multiple copies of the same document no matter how many copies the software tells the printer to print it will only print one copy then it stops. Before the moved it worked fine. If the software program such as Word told it to print 100 copies it printed 100 copies now one is the limit. So if you want to printmore than one you have to hit print that many times. It has 172 MB RAM. Does anyone have any ideas of what might have happened????

I have the same issue with a photosmart 2410xi. Did you ever get yours figured out?

CS5 Will not open more than one photo/file simultaneously

In CS5, when I select more than one image to open together, only the last image in the selected group opens. Also, when I select "new" to open a new page on whitch to paste multiple copies of an open image, the open image deletes. Have never had this problem in previous versions of PS and version CS3 that I have kept until I get CS5 to function, works fine completing these functions. I couldn't find any setting in preferences to resolve this issue.
I am using CS5 on a Mac running Snow Leapord OS10.6.8

[SOLVED] Report Repeating Frame Will Not Print More Than One Page of Data

I have a layout which contains only 1 repeating frame, and is not contained in any other frames. The query that the group of this frame is based on returns 414 rows. The report is a character based report of 180x66. All of the fields in the repeating frame are all in a straight line on a single row.
No matter what I do, the report ends at the bottom of the first page. If I put the frame at row 30, only 36 rows are printed. If I put the frame on the first row, it stops at 66. No mater what I do, it will not continue on the next page.
Any ideas on what could be the problem here?
Thanks,
Kurz
Edited by: Kurzweil4 on Oct 13, 2008 3:35 PM
Print condition was set to All. Changing it to First solved the problem.

Make sure the repeating frame is variable vertically and that all the frames that it encloses are variable.

80GB will not load more than 2GB

Similar Messages

Maybe you are looking for