8130 Bluetooth Connect Option Missing for Some Devices

I cannot connect to some bluetooth devices on my Blackberry 8130. Most devices I pair with have a connect option in the bluetooth menu but some don't, even though they have been successfully paired. I have a specific device, a Holux H-1200 GPS that I used OK in the past with my 8130 but now refuses to connect and I cannot manually conect since there is no Connect Option for this particular device in the list of paired devices. I have deleted and rediscovered the device multipe times. When I pair successfully the properties show the Services SPP slave listed. I have tried to enable and disable Trused and Encryption but nothing helps. The Connect Option is present for all paired devices except 2 or 3 on my BB. My bluetooth options are set at Discoverable yes, allow outgoing calls yes, address book transfer all entries, security level high, and all services are check marked. I am with Verizon and my phone software level is 4.5.0.56.

In my own personal experience I have found that sometimes elements of the page (such as the Get Sample or Buy buttons) don't load in or load in incorrectly. Most of the time I've found that simply going to another page then back to the previous page fixes the issue or, like you have done, browsing from another devices shows the page just fine.

Similar Messages

Final Cut Pro X: What's Missing for Some Pros

Final Cut Pro X: What's Missing for Some
See:
Creative cow:
Walter Biscardi

The floppy drive is a horrible analogy. One could still use the external floppy drive, as you say. But what your analogy is ignoring is that at some point that floppy drive option will disappear as a later OS rolls out and the floppy drive is no longer supported, however the other people I am innvolved in working on a project need me to have a floppy drive to pass along my work.
Yes, I can use FCP7 as I need to for the time being (and will do so) but you can bet that won't be the case for all that long. Eventually the ability to use FCP7 will decline as OS changes etc. In the meantime you can bet that the broadcast and film world is not going to change their delivery specs and requirements simply because Apple decided to change FCP to X and ditch the genuinely PRO features of FCP7. There are too many Avids and other options for them to decide that they will change just because a portion of the professional editing world has been forced into Apple's way doing things. They will simplu say, "Get an Avid . . ."
So the floppy analogy not so accurate.

Cost and/or Conversion Rates are missing for some planning resources

Hi,
In Workplan of projects, we are facing a issue "Cost and/or Conversion Rates are missing for some planning resources". even though the schedules for the project WP is defined.
Any inputs on this is highly apprciated. Thanks !!!
Regards,
Pallavi

Did you check the Cost for all the Planned Workplan Budget Lines. Generally, this type of error comes when the Quantity is defined but the Cost is missing for any Line. Find that Planned Workplan Budget Lines and enter the Cost for them and save it.
I hope it may help you.
Regards,
Khan.

Hi All, I am trying to install informatica 9.1 HF 2 connecting to 11g DB. when installing Informatica, I am at the DOMAIN CREATION windows and inputting the DB connect details and for some reason, it cannot connect to the DB. The DB is running any id

Hi All,
I am trying to install informatica 9.1 HF 2 connecting to 11g DB.
when installing Informatica, I am at the DOMAIN CREATION windows and inputting the DB connect details and for some reason, it cannot connect to the DB.
The DB is running
any ideas?
the error message states:
THE CONNECTION FAILED: CORRECT THE DATABASE INFO AND TEST THE CONNECTION AGAIN..any help please
thanks

Yup, that did it.
I actually had been made aware of the patch when I downloaded CF, but for some reason I thought it was difficult to install (I thought that you could only use the installer package if you could open Administrator). IAC I downloaded the appropriate patch file, ran it and Administrator ran. There was something in the install notes about reconfiguring the websites and removing the IIS6 Management feature but I'm not going to fool with anything because right now at least CF is running.
Thanks.

Using My N73's Bluetooth connection as adapter for...

Hey guys,
This is not a question that can be put into one sentence...
I shall put it as short and descriptive as possible.
I can connect my laptop to the internet using the Built-in Modem I have in my laptop (Dial-Up).
My brothers laptop is new, He does not have a Modem built in and I do not have any other hardware here.
I was thinking, Is it possible to Have the following setup
Dial-Up -> Laptops Modem -> N73's Bluetooth connection -> Brothers Bluetooth connection (on his laptop) -> Internet.
So actualy making a Networking Bridge from My Laptops Modem to the Bluetooth of my N73.
(I could maybe buy a Lan Cable somewhere here and make a Networking Bridge between the Modem and the Lan port, but only if this is not possible whatsoever.)
Thanks In Advance...

This has been a while, and I am back home now.
What I ment is what I said, I never mentioned my laptop having a Bluetooth connection nor using my telephone as a modem. I said that I wanted to use my Laptop as Modem and my brothers laptop as the client connection through bluetooth to my telephone wich in his way would be just a bluetooth adapter for my laptop. Now I figured that out myself and I had Dial-Up Internet on both laptops.
Since It worked I am going to ask another question hoping that you guys will just say I don't know instead of It's not possible.
How do I configure my N73 to become my laptops Bluetooth Adapter so I can connect any bluetooth device to my laptop.
(saves me 20 euros, but that is not the point)

Audio Out doesn't work for some devices under 9600m GT; works under 9400m

Hello. I've recently noticed that when I plug my MBP into my TV to use as a monitor and for speakers, I can't use the TV's audio when I'm using the 9600m GT for graphics, but, mysteriously, it works just fine when I'm on the 9400m. This is a major problem for when I want to play games.
For some odd reason, though, plugging in headphones works perfectly under both configurations. I connect the audio to the TV using a standard audio cable that splits into the red and white plugs. Any idea how I can get audio up and running under the 9600m GT?
Message was edited by: Pickleman

Thanks for the confirmation.
I think my issue could be the same, as i'm also trying to send audio to the tv via the headphone port. Just saying again to explain better:
- Tv's have analog audio input for hdmi, but at least for mine, it only uses these inputs if it does (or doesn't) get a certain signal for audio over the hdmi connection.
- Whatever the 9400 is doing, its convincing the tv to use the analog inputs, all is well.
- Whatever the 9600 is doing, its convincing the tv -not- to use the analog inputs, thus no sound.
It was a bit fiddly, but i got it to a state where audio through the headphone port would work fine under the 9400, i would set graphics to high performance, log out, log back in again, and audio would not work. Undoing this (setting the graphics to better battery life and relogging in) would restore sound.
I'm thinking the root of the issue is that the tv gets detected as supporting audio, and something the 9600 is doing is fooling the tv to think it is receiving audio, though as you suggested it's not supported and nothing is going though.. which has the side effect of igoring the analog inputs we're sending though the headphone jack.
Some sort of fix to disable audio down the displayport would be great. PC nvidia drivers that i'm running on the same mac in boot camp have an explicit option to do this, so it shouldn't be too hard..
Or any other work around..
Thanks!!

Stabilization option disappears for some clips

Hi. Need a little help. When I highlight some clips in my timelin, the options for Stabilization and Rolling Shutter simply do not appear in the video Inspector -- but those options are there when I highlight other clips.
Could you help me get the Stabilization option back for these clips?
In more detail, what happens is this:
In my timeline, I highlight one clip and all the standard video options appear in the Inspector: Color, Transform, Crop, Distort, Stabilization, Rolling Shutter, Spacial Conform, Compositing
I highlight another clip, and Stabilization and Rolling Shutter are the only options missing entirely in the Inspector
I've tried clicking on the down arow in the top left corner of the affected clips, and selected Analyze and Stabilize, but that does nothing and does not make the Stabilization and Rolling Shutter options appear in the Inspector
I've also tried launching a whole new project, dragging some of that footage back into the timeline, and the same thing happens: no Stabilization option in the Inspector
Been editing for months in FCPX and this is the first time this problem has come up. Did I accidentallyy click a button I shouldn't have? Any help to resolve this would be much appreciated.
Thanks!

I have the same issue. Can't really trash & reimport everything. Trashing preferences doesn't work. Some clips have it, others don't. Very random.
EDIT: I just noticed that all new clips dragged into the project do not have stabilization anymore. So, below is a pic of two identical clips in the same project, one added months ago to the timeline, the other added today.

Bluetooth PeerFinder.AlternateIdentities keys for unpaired devices and check status

Hi,
I am developing a Bluetooth printing application. In which I want to find and pair device in the application itself.
PeerFinder.AlternateIdentities["Bluetooth:PAIRED"] = "";
To find the paired devices, but in a scenario when device is not paired then I am not able to find any new devices in peerfinder. Is there
any way to get a list of unpaired devices along with the paired devices and pair with them if they are not paired.
Also, I want to check the status of Bluetooth devices-
1. Is it currently on or off?
2. Is it currently connected?
- Thanks and regards
Onkarraj

Thanks for the reply. <gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="83444b86-c250-4820-95f8-8bb17e538e25"
id="ec2903ff-6f6c-4a76-a415-7271dc2489dd">but</gs> it is only giving me details of Network connections.
//Retrieve the ConnectionProfile
            string connectionProfileInfo = string.Empty;
            ConnectionProfile InternetConnectionProfile = NetworkInformation.GetInternetConnectionProfile();
            //Pass the returned object to a function that accesses the connection data
            connectionProfileInfo = GetConnectionProfileInfo(InternetConnectionProfile);
I have tried above code and find no good.
-Onkarraj

Why isn't the SD option working for some tv shows?

For convenience sake, I download a lot of tv shows, and I have always had the option of choosing SD or HD. For some shows (for example, Devious Maids) it will only let me choose HD now, though I have bought it in SD before. Most of the shows are still available in SD on Amazon, but I prefer iTunes. Anybody else experiencing this and does anyone have an explanation?

Either your words are not 3D layers or your Composition is set to Front View. You must be looking at the Active Camera view to see what the camera moves will look like when rendered.
If that doesn't solve your problem then select the camera layer and the text that is not moving, press the U key twice to reveal all modified properties and send us a full resolution screenshot by dragging it into the Reply field on this forum.

Purchase Order missing for some of the Sales Order for few customers

Hi All,
There are few sales orders for which corresponding PO is missing.
But most of other Sales orders for the same set of customers, PO is coming.
Could you please enlighten me how this PO is assigned to the Sales order or it is updated with the Inbound Idoc ..
In any case what may be the reason for PO missing for these sales order...How I can explore this...?
Thanks,
Sanjeet

Hi sanjeet,
If your IDOC is ORDERS05, Check if you are getting the PO Number in : E1EDK01-BELNR
Regards,
Ravi

StoreFront : Payment and Shipping group relationships are missing for some orders

Hi Team,
In our application, we are able to see relationship between payment and shipping group for some orders. But we are not able to find these relationships for some orders.
We are verifying in "dcspp_payship_rel" table. We are wondering why this behavior is happening for some orders.
Could you please suggest to move further ?
Regards,
Babji...

Hello.
First of all you must ensure that you are properly using transactions when you create/update the orders.
There are best practices to update the orders in ATG that must be followed to avoid loss of information.
Like this steps below:
Acquire a write lock using the ATG lock manager.
Start the transaction.
Synchronized on the Order object.
Update the Order.
End the synchronization.
End the transaction.
Release the lock.
Here are some links that should help you understand the steps to be followed to make a correct update of an order:
https://atgoasis.wordpress.com/2014/08/28/best-practices-for-updating-an-order-in-atg-commerce-applications/
http://www.digitalsanctuary.com/tech-blog/java/atg/design-pattern-for-updating-an-atg-order.html
http://sumangalavijay.blogspot.com.br/2011/10/atg-update-order.html
Oracle ATG Web Commerce - Managing Transactions in Oracle ATG Web Commerce
Hope it helps you! =)

Statistics missing for some tables in sys after scheduler job ran

In a 10g database, the scheduler automatically has the job set up to gather the statistics for the sys schema. I noticed the job was disabled for some reason so I enabled it yesterday and it ran last night. I didn't see any errors for last night's scan.
I have looked at sys.all_tab_statistics and noticed that there are many tables in sys that have a last_analyzed date of last night but there are also many tables that have a last_analyzed date that is a long time ago. For example, the argument$ table has stats from 8/21/06. Also, the scheduler window did not close before the job finished.
Some of the tables that weren't scanned report 'YES' in the 'STALE_STATS' column.
Why doesn't the GATHER_STATS_JOB gather stats for all of the tables in sys and only some of them?
Ideas?

Check whether statistics gathering is locked. You can use below query
SQL> select stattype_locked,table_name from dba_tab_statistics where table_name
like '%ARGUMENT%';
STATT TABLE_NAME
ARGUMENT$
SCHEDULER$_JOB_ARGUMENT
SCHEDULER$_PROGRAM_ARGUMENT
CWM$ARGUMENT
If you find stattype_locked column null, then i believe it is to do with monitoring stuff.
Regards,
Satheesh Babu.S

E2E WA: Data missing for some tabs

Hi,
We have configured solution manager (4.0) ABAP stack to collect data from its own Solution Manager Diagnostics. Under the Workload Analysis the data is showing for some of the tabs like WorkProcess, Short dumps, User Load etc but some of the tabs like Top Dialog, Top Batch are not showing any data.
Any clues ?
Thanks
Murali.

Hi,
Thanks for the reply. If the system is up and running and if ST03n is showing a Top Dialog or Batch out of whatever it ran for that day or week will not that be enough to show in the SMD screen ? Is there anything else to be looked into specially for Top Dialog or Batch kind of classification ?
Thanks,
Murali.

Contact sheet caption missing for some photos

I made a contact sheet from a selection of photos and for some reason, the one metadata field I selected to output with each image, the IPTC caption field, is included in some but not all photos: the specific photo I wanted did not have the caption output. (It is a JPG file.)
The caption is rather long (27 lines, 517 characters), but that should not be a problem.
Any ideas why some image's caption field is not coming out on the contact sheet?
Regards,
Strathglass

No one have any idea why captions for some photos do NOT appear on my contact sheets?
Regards, Strathglass.

Bluetooth drivers not available for Android device on T510

I recently connected my phone to my T510 via Bluetooth, all but 2 drivers installed. When I look at the phone in the "show Bluetooth Devices" screen on Win 7 64bit, it shows a yellow "!", on the bottom it says "Status: Needs Troubleshooting". When I run troubleshooting on it it says windows can not find the correct drivers for two options.
Here is what I did as a workaround
Tried to install the newest driver from the Lenovo site but it won't finish the download.
Did a windows update while it was running and it did install a new driver but it doesn't allow for the last two drivers to be installed.
I can't tether my phone to my T510 for internet without these drivers it only allows me to:
Transfer files
Listen to music from my phone on my laptop
Use my laptop speakers and mic as a remote headset
Does anyone have any ideas or the correct drivers?

Go to control panel and uninstall any bluetooth drivers there then try downloading it from the Lenovo site again and install.
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS013631
*Non Lenovo employee*
I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =)

8130 Bluetooth Connect Option Missing for Some Devices

Similar Messages

Maybe you are looking for