817 Install onto AIX with existing 920 home - some issues

AIX 5.3 64 bit
I already have 920 installed in an OracleHome as part of Apps 11i.
I am attempting to install 817 into a new home on the same server. When I get to my list of products it says OUI is already installed and is at version 2.2.x.x (it is already installed, but in the 9i home), therefore it will not let me select OUI 1.7.x.x as an installable product.
I want to install 817 with it's own version of OUI so to keep the 817 install completely seperate from the 9i Apps 11i install. Anyone know anyway around this problem ?
Thanks in advance.

Hi ,
Does oracle 8i client supports for AIX 5.3 ? Because i want to install Oracle 8i client on AIX 5.3 as root, but i cant even after running the pre-installation.
thanks

Similar Messages

  • Suggestion for installing 11gr2 crs with existing 10g crs...

    Hi, I need suggestions on installing 1120 rac on suse 11 where already 10g rac with asm is running. I need to upgrade the 10g crs and asm while installing 11g crs. Pls share your experience on these
    1- what are the challenges to run 10g database on 11gr2 crs? is this suggested?
    2- challenges to upgrade asm and crs to 11gr2.
    3- can we use 2 asm instance in 11g grid infra to manage 10g and 11g db separately.
    4-what could be back strategy for this kind of setup? RMAN?
    5-how many extra ip i need to install 11g crs with existing 10g crs . we plan to use 3 ip for scan.
    Also if possible please share any doc for this kind upgrade
    Thanks,
    Abhai

    1.) Yes this is o.k. Just see this MoS Note:
    Pre 11.2 Database Issues in 11gR2 Grid Infrastructure Environment (Doc ID 948456.1)
    2.) Well first only clusterware is upgraded. You will be asked if you want to upgrad ASM, but this is not mandatory at first.
    You can use ASMCA later to switch ASM from 10.2 to 11.2 (this does not have to be done during upgrade).
    3.) No you can only have 1 ASM running. So it is either 11.2 or 10.2 ASM. (However I suggest 11.2).
    However you can/should have multiple diskgroups. One data and fra for the 11.2 databases where you set the rdbms.compatibility to 11.2 to use the new features, and one data an fra diskgroup for the 10.2 databases.
    4.) As long as the compatibility setting of a diskgroup isn't changed, you can always switch ASM back to use 10.2 executables. (Just do a srvctl remove asm and add ASM).
    Search this forum - there has been another thread about this.
    Regarding fallback of clusterware => See installation guide.
    5.) Mandatory are just 3 additional IPs for the SCAN.
    Upgrade documentation see the installation guide of 11.2 GI.
    Upgrade for ASM see Storage Admin Guide.
    Upgrade to move OCR and Vote to ASM see Clusterware Admin Guide.
    Upgrade to database see Database Upgrade Guide
    Additionally look in MoS for the Upgrade Companion.
    Sebastian

  • Hi, I have installed boot camp with wins xp home but i can't get on line with it. can only one help please.

    Hi, I have installed boot camp with wins xp home but i can't get on line with it. can only one help please.

    Please close this thread, I have managed to get a hold of a DVD including all the drivers, so I suppose that will work, if not one way then another.
    Thank you for the quick answers.

  • Installing Grid control with existing IAS

    Is it possible (and how) to install Grid control into existing Application Server installation? Or integrate it somehow?

    yes u can install Grid control into existing Application Server installation

  • Creative Cloud : How to install page error "We are currently experiencing some issues, please try again later. If the problem persists, contact customer support."

    I recently purchase a full membership student yearly plan. I was prompted to this page after my payment was confirmed - https://creative.adobe.com/products/download/creative-cloud
    However I continue to receive the error "We are currently experiencing some issues, please try again later. If the problem persists, contact customer support."
    What is going on here?
    Is there another way to access Creative Cloud download and installation?
    Thanks.
    Robert.

    Robertdaw and MyName LOL! please utilize a different web browser.  If you continue to face difficulties then I would recommend beginning the installation process through the Creative Cloud Desktop directly.  You can find details at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

  • Oracle installation on AIX with existing instances

    Hi,
    I would like to know if there is a procedure document which can explain the installation of Oracle 9.2 on AIX platform of a host, where there are 3 instances of DB already existing.
    Do I need to run 'rootpre.sh' before I execute runinstaller?
    What precautions that I need to take care? I am worries if I do any new environment variables setup that may disturb the existing instances of SAP R/3/oracle.
    Thanks,
    Ramesh.

    see also this SAP note beside the SAP note  98252.
    21960 - Several instances/systems on one UNIX computer
    You need to execute rootpre.sh once per host.
    Best regards
    Baran

  • Installing Flash Player with Windows Vista Home Premium

    I'm trying to install Flash Player on an older system running Windows Vista Home Premium. Do I need an older version of Flash Player?

    Actually, unlike Adobe Reader, Flash Player is officially supported on Vista: http://www.adobe.com/products/flashplayer/tech-specs.html

  • HT4413 we are trying to move a user account from OSX.8 back to an older Mac with OSX.5 Having some issues. Someone help?

    I understand why it does not work due to compatability issues. Is there a work around?

    First, can you clarify what OS versions you are talking about? OSX.8 is meaningless.
    OS X versions are of the form 10.x.x.
    Leopard = 10.5 to 10.5.8
    Snow Leopard = 10.6 to 10.6.8
    Lion = 10.7 to 10.7.4 (so far)
    Mountain Lion = 10.8 (has not yet been released)
    In general, you can't use migration or setup assistant to  recover data from a later OS version.
    I wouldn't see much problem doing it the hard way, though - just using file sharing or even target disk mode to transfer user data.
    There may be problems with some files saved in some applications on Lion having compatibility issues with earlier versions of those applications.
    I'm sure a Lion user can enlighten us further.

  • Installing Des.6i on already existing 8i home

    Hello All,
    I have Windows 2000 client with Oracle 8i client tolls already installed, I am trying to install designer 6i which needs another oracle home other than Oracle 8i home. I have created another Oracle home by editing registry and the designer 6i installation gets terminated with a message explaining that it cannot work with multiple oracle homes.
    The remedy that I can only see is to remove all existing oracle homes with the products and then start with installing designer 6i first followed by Oracle 8i into its own home.
    I want to install designer on a few clients where the 8i already exists and if you guys know any other easier way please do let me know so that I can avoid de-installation.
    Thanks in advance

    You may do some tricks with the Windows Registry or just wait for Designer 6i Release 2 which supports multiple homes.
    According OTN it should have arrived last December. If you beleive in Oracle's commitment wait a bit. Can't tell how long.
    The product was due couple of months ago...

  • Installing WebCenter in existing Middleware home next to UCM

    Hello!
    I've been tasked to install WebCenter with Spaces and have it interact with our existing UCM 11G install. I already have Middleware Home directly, and the UCM server in that. All is working well.
    I know need to install WebCenter separately on the same machine. As part of the installation of WebCenter it tells me that I need to create schemas for Spaces and install Content Server. Do I really need to do that, or can I use existing schema for UCM and an existing Content Server?
    If that needs to be a separate schema for Spaces, how the new and existing systems will interact?
    Thank you!
    Anya

    You can do it but it willl reauire some additional configuration. When you install UCM together with Webcenter, it will configure UCM for WebCenter. You need to install a few components and so on. Now you will need to enable these components seperatly.
    When you run the RCU, you don't need to create the UCM schema's. When you extend an existing domain, you will need to point to an existing UCM schema, just specify the values for your existing UCM schema's and everything should be fine.

  • When trying to install adobe photoshop cs4 on my new computer with windows 7 home premium and get a message to contact adobe because of an error. any ideas

    when trying to install adobe photoshop cs4 on my new computer with windows 7 home premium and get a message to contact adobe because of an error. any ideas

    JJMack <[email protected]> wrote:
    =============
    JJMack  created the discussion
    "when trying to install adobe photoshop cs4 on my new computer with windows 7 home premium and get a message to contact adobe because of an error. any ideas"
    To view the discussion, visit: https://forums.adobe.com/message/7092876#7092876

  • Formatted HP dm4-3099se with Windows 7 Home Premium and Would Want to Re-install the Home Premium

    My laptop is HP Pavilion dm4-3099se and it came with Windows 7 Home Premium. The password was misplaced and I was advised to format the system. The system was formatted (all the disks were deleted except the C: drive) and a Windows 8 pro OS installed. Shortly after the formatting, the misplaced password was found. If it is possible, I would love to revert to the OS that came with the system (i.e Window Home Premium) and also recover all the drivers that came with the system.
    Please, help me.
    This question was solved.
    View Solution.

    Hi,
    There are Two options available.
    1.  You can order a replacement set of Recovery Discs using the link below - these will reinstall the operating system, all required drivers and nearly all of the original software ( the exception often being trials of MS Office ).  They will also re-create all the original partitions, including the Recovery Partition.
    Order HP Recovery Discs.
    2.  Another option you could consider is to create your own Windows 7 installation disc.
    Also, if possible, back-up the swsetup folder that can be found at the root of your C drive.
    You can create a Windows 7 installation disc yourself using another PC - just download the correct Disc Image ( this must be the same version that originally came with your notebook - this is listed as Windows 7 Home Premium 64bit ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here.  These Images are clean and from a well-respected source ( Digital River ).
    Windows-7 sp1-iso-official-32-bit-and-64-bit
    Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
    http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
    Regarding the drivers etc you need, if you were able to back-up the swsetup this will contain all the software and driver installers for your notebook - if you weren't able to, drivers and software you may need can also be found Here.
    Best regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I cannot load the latest version of Itunes on my Toshiba PC with Windows 7 Home Premium. Tried to re-install. Dead in the water. Windows error 126. Cant start becasue MSVCR80.dll is missing from my computer

    I cannot load the latest version of Itunes on my Toshiba PC with Windows 7 Home Premium. Tried to re-install. Dead in the water. Windows error 126. Cant start becasue MSVCR80.dll is missing from my computer

    You may have to follow the slightly more detailed steps in whichever of these two applies to you.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    Rebooting into safe mode may be needed to delete any folder the instructions say you should remove. You may also find this Microsoft Fixit helps to remove stubborn components. It has taken some people several attempts to completely clean iTunes and supporting software before they have been able to successfully reinstall it.
    tt2
    Message was edited by: turingtest2

  • Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901

    Hi Everyone,
    I have a program that sends information(analog output) to lab windows cvi in the form of a text file or user input.
    The program runs on the computers that I have the field point explorer and lab windows cvi installed on. In order to run the program without always installing labwindows/cvi and field point; I wanted to create an executable file that could be load on another computer.
    I used the create distribution kit part of labwindows/cvi to do this.After creating the distribution kit, I then installed it
    to another computer.
    My user interface appears on the screen, when the user clicks on the exe. file, but no data is sent to the field point module. I know that the data is being read from the user and textfile because in it appears in the uir.
    The following are some details about the problem:
    1. On another computer without labwindows/cvi and field point explorer not installed - no data is sent to field point module
    I know this because a current is being read on the current meter connected to field point module.
    My questions are the following:
    1. What are the possible reasons for the data not being sent to the field point module?
    2. Do I still need to create an iak. (Installing Field point Explorer) file stored on any new computer that I install my created distribution kit file too?
    Thankyou very much for any help that you can provide. I greatly appreciate it.
    Faen9901

    Re: Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901Faen9901,
    1) If you do not install FieldPoint Explorer, the FieldPoint Server is not installed so there is nothing on the target computer that knows how to talk to the FieldPoint system.
    2) Yes, you need an IAK file on the target computer. Assuming the settings (i.e. com port#) are identical you can simply include the iak file as part of the distribution.
    3) You also need to include as part of your installer the file "fplwmgr.dll". If this file is not installed, your program will not be able to access the FieldPoint Server. Alternatively, this file is installed automatically if FieldPoint Explorer detects LabWindows/CVI or Measurement Studio Development versions on the target computer or if you choose to do a custom FieldPoint Explorer installation and
    choose to provide LabWindows/CVI support.
    Regards,
    Aaron

  • Installing SAP 4.6B with existing database

    Good evenning.
    I need to install SAP 4.6B with existing database in SQL Server 2003.
    How can I do this installation?.
    Can you send me many guide?
    Best regards.
    Luis Gomez.

    According to
    http://service.sap.com/mcod
    --> Availibility
    4.6B is not supported (too old).
    Markus

Maybe you are looking for

  • Cas Log Errors - Failed To Delete Directory

    In most of the CAS logs on clients I see the error repeated: Error: DeleteDirectory: - Failed to delete Directory with Error 0x00000003 Error: DeleteDirectory: - Failed to delete Directory C:\Windows\ccmcache\**** with Error 0x0000002 What is the cau

  • About bitmap object

    i want to load my icons set from external png so that i can change/update them without recompile my swf. my question is: save those icons in separate files like icon_00.png, icon_01.png, icon_02.png and attach them to display object. or just save the

  • Language Change English to Chiness

    Hi, i have change language of my application From English to Chiness and Hindi. now when i run application then that show me ?? etc i have Follow that Link http://darekj.blogspot.com/2006/06/translation-in-apex-mini-how-to.html how to resolve that pr

  • How do I resolve the issue Cannot open the file ".indd". Adobe InDesign may not support the file for

    How do I resolve the issue Cannot open the file ".indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing , or the file may be open in another application?

  • My itunes doesn't work, help please!!

    it doesnt want to sychronise....://