8220 unable to connect to Mac via USB connection

hello
I installed the software, but none of the file transfer menus are available.
please help
thanks,
Llyane

I called a vw dealership (in South Australia) today because I have an iphone5 and a Tiguan and experienced the same thing (after i had purchased the lightening/30pin adapter).
I was advised that the media interface software is not compatible with iphone5. VW will eventually update the software according to ol'mate at the dealership, but it will be at an expense to the consumer allegedly.
I know that there is a iphone/vw media cable one can purchase from VW however, I believe this to only work with iphone4 or older?
Maybe try an older generation ipod to use for the car if all ur music is in itunes?
if anyone can correct me, I'd be more than happy to know... going to try my older generation ipad and see if there is any truth to the tale.... eventually. Until then i'll stream via bluetooth :-)
Sheree

Similar Messages

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. Any tips on how to do this?

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

Is it possible to connect two Macs via USB ?

Is it possible to connect two Macs via USB just like Firewire back in the day via Target mode or is there something similar? I am asking this because about 2-3 years ago I would normally image Macs via Target Mode. I used to have a regular Macbook running 10.6 along with a customized-ready-to-go .dmg image saved on the Desktop. Whenever I needed to put that image into any Mac I would simply connect the two Macs via Firewire, I would then press "T" at startup which will get me in Target Mode, I would then see the disk appear in the desktop of the Mac I had the image. I would then copy that image to the T mode macbook using super duper. Can this still be done through USB with new models and if so will I also need to press T at startup ?

No, USB connection does not qualify for this, only firewire and thunderbolt, as I read (but cannot test, for the time being I have only one such mac around).
This is why the short series of alu MBs (2008) are not qualified for target mode either.
p.s. What ‘new models’ do you refer to?

IPad air audio to Mac via USB

I would like to connect my iPad Air Lightning Output to my Mac Pro via the Mac Pro USB for input of audio from the iPad to the Mac Pro. My Mac is connected to my audio equipment via analog audio out and the TOS connector. I would like to connect the iPad Air to my Mac because these audio connectors are hidden behind my workstation and I already use the MacPro USB port for power/charging the iPad Air. Connecting the headphone out of the iPad to another interface in order to get to my amp is simply another cable that I don't need or want. Less cables are always better IMHO.
Ideas?
Thanks,
Pete D.

usb is a digital serial bus it does not carry analog audio to be able to do what you wish a program would have to run on both devices and I doubt that 3th party programs can get access to the usb port in ios
your best bet is to connect the minijack audio out connector of the ios device to a minijack analog input port like line or mic in on the mac
if a such does not exist then you can get usb audio cards for the computer which would have a 3.5mm minijack line in

IPad won't stay connected to Mac via USB

I was attempting to install the latest update to my iPad2 via the USB cable connected to my 2013 MacBook Pro Retina with the latest Mavericks and iTunes update installed. I left the download and install to complete overnight as it was taking a long time. When I checked it in the morning, my iPad was in recovery mode. I was supposed to reset the iPad back to factory specs. It would not recognize my last backup at all although it was on my Mac. I was finally able to get the iPad back to its original factory software. I then tried to update to that backup. Somewhere along the line during that effort, the iPad went back into recovery mode again.
Since that time whenever I plug in the iPad using the usb connector to the Mac, the connection begins to fluctuate rapidly on and off. It does not maintain a connection for even a whole second! I then tried connected the iPad using a different USB cable and after that a different USB port. Finally I even tried it using a hub as a go-be-tween. None of these options worked. I then tried connecting the iPad to a power outlet to charge to see if there was a problem there. It connected to power just fine and charged the iPad.
At this point I'm stymied and don't know what else I can or should try. Any help would be appreciated.

I can't imagine that this would help but have you tried resetting the iPad and then try recovery mode again? It may not help, but it can't hurt anything at this point. Hold down on the sleep and home buttons at the same time until the Apple logo appear on the screen. After it restarts, try to restore again.
If that fails, do you have another computer that you could use to try to restore on?

Canon Printer mx860 not working since upgrade to Yosemite, it is connected to my Mac via usb. Any suggestions? Thanks. LL

My 2009 Canon MX860 Pixma printer not working since an upgrade to Yosemite on my MAC version 10.10. It is connected by USB. Have had no previous issues with printing, scanning or faxing. When trying to print my Calendar I only get light vertical dotted lines, none horizontal, no words and vague header colors. Checked printer image on the on my MAC which shows the same problem. All of the color and black cartridges are new.
The recent upgrade to the Canon application says it is completed but it is not, image on application upgrade is a circle with an X.
Any suggestions? Could this simply be a compatibility problem? I'd sure like to keep my Canon printer.
Thanks, LL

Can you open System Information (Applications > Utilities) and select Printers in the left sidebar. If the MX is the only printer connected to the Mac then its information will be shown in the right pane. If you have more than one printer, then a list will be shown in the top right pane. Select the MX to see its information in the bottom right pane. Can you copy this information and paste back here for me to check.
Also an FYI - this is the Mavericks forum. The Yosemite forum is here

Is there a way to copy full resolution pictures to ipad from my mac via usb or sd connection kit?

I would like to copy my pictures to my ipad 2 at full resolution, partily for editing, partily for backup. I have used some of the wifi ipad apps out there and they all seem to be problematic and load up the camer roll. I have the sd and usb camera connection kit put out by apple and this works great as long as the pics are in their original file name (for some reason).
I would love to be able to just use the usb camera connection kit plug and copy all of these over in their folders ect. But I realize that may not be possible at this time.
Is their another easier way?

Syncing them via iTunes (and via Photo Stream in the Cloud) will 'optimise' them, so you will either need to use one of the wifi-transfer apps (in which case they will go into the Camera Roll) or the camera connection kit (when they will go into an 'imported' album). For the CCK and you need to create a DCIM directory off the root of the card, with the photos underneath it, and the photo filenames need to be exactly 8 characters long (no spaces) plus the file extension i.e. in a similar format as if a camera had created/written them.
I haven't tried any, but there may be third-party apps that you could use to store and keep the same file organisation of your photos.

Fuji F30 camera won't mount OS 10.3.9 2 different Macs via USB no connect

I have a Fuji F30 digital camera - also my daughter's Fuji F11 will not mount/connect through USB on either of my 2 Macs running OS X 10.39 - A Dual 1Ghz G4 and a 867 Mgz G4 Powerbook.
My daughter's Fuji F11 connects fine on her eMac with OS X 10.3.4.
I even installed the Fuji Finepix software on my dual gig to see if that would help - no good. I was about to update the eMac to 10.3.9 I'm glad I didn't.
To check it wased the cable or camera, I installed the Fuji USB drivers etc. on my Windows 98 machine and the Fuji F30 connected, copied fine and the card wasn't corrupted.
Is there a fix for this?
Is this a problem in 10.4?
Thanks, Phillip
===
This is probably a different matter:
Also I have a Zio Caramate card reader for the xD cards. I can mount and copy to my Macs running OS 10.3.9 but after unmounting and removing xD card, card is corrupted and needs to be reformated so all images are lost from card.
Do you think this is a card reader problem or could it be the same 10.3.9 USB thing?

Fuji F30 just came to the market. The correct driver for that camera may be missing in 10.3.9. which is probably older than the F30. In case you have Adobe Photoshop or Photoshop Elements, you could download the latest update and probably have the F30 supported in that way (?). The same thing could help with reading the card correctly. This is my experience with other digital cameras.

I cannot connect to my LAP Top or my MAC VIA USB

When I plug the USB from the DROId Razor X neither my PC or the MAC recognizes theSD card. I know the problem is not with the cable as it shows the phone is charging.

Which phone do you have again? There is no such thing as a "DROID Razr X".
Also what version of Windows is running on your laptop? There have been some people having issues with connecting to Win8 machines. For the MAC computers, you need an additional program called "Android File Transfer" and I think you can get the steps for installation on Android Central or perhaps it was mentioned in another discussion on this community.

How long does it take to migrate mac to mac via USB

I have the new 27inch iMac, and I am migrating via a USB from my 2008 imac running the latest Mac OSX Lion. It seems to be taking forever.
It is still telling me 24hrs 31 hinutes after 1.5hrs to transfer 320G. Does this sound right? It seemsnot to be moving in time to complete.

Don't use WiFi
Here are the maximum transfer speeds for each connection type
WiFi       300Mb/s (actual rate closer to 50Mb/s depending on distance to source, terrain and error correction)
FW 400 400Mb/s
USB2     480Mb/s
FW 800 800Mb/s
Ethernet1000Mb/s (Cat5 cable)
USB3     5000Mb/s
TBolt     10000Mb/s
In all cases real world speeds tend to be lower but a direct Ethernet connection is fast and reliable. 4 hours plus is not unusual, there is more work going on than just transferring files.
PS: in the case of a connection using 2 methods (eg: FW400 to FW800) the transfer is at the lowest of the 2 speeds, not the highest.

My Apple TV stalled during an update and now just shows an image of it being plugged into a USB. It won't complete the update and does nothing when I plug it into my Mac via USB.

2 Apple TVs. The first won't reboot, it stalled during an update and now shows a picture of a UBS plug. Ive tried to plug into my computer, nothing happens. At a standtill.
The second Apple TV works but only if I send something via Airplay. The remote no longer has any affect. The light on the front of the Apple TV blinks when I push a buttom on the remote but nothing happens.
Any Ideas? I am starting to think I need to replace them. Thanks.

Ok, with itunes open on the pc, plug one end of the usb cord into the computer, but not connected to the ipad.
now, press the power button on the ipad until it turns off.
Then, press and hold the home button on the ipad at the same you plug the usb cord into the ipad. DON'T LET GO OF THE HOME BUTTON.
Keep holding the home button until you see the recovery mode message pop on the itunes window.
When that happens, you should now be able to restore.

Does anyone know....I have a original dock that is hooked to my Mac via USB

This is a dock from a long time ago (the date on the bottom says 2003) Does anyone know if this provides charging power on the 5V USB and 12V fire wire pins of iPods. The reason I would like to know is I am thinking about buying a 2G iPod Touch and would like to know if I will need to buy a new dock or not.
I know that the dock adaptors will not fit, but I have been using this dock to charge my Nano and Classic and it seems to work fine, its just not that snug in the dock.
Thanks,
Steve

I suspect not. If your dock is this one http://support.apple.com/kb/TA26107 it charges using firewire.
I have an older dock that does work. The model # on the bottom is A1153.
The Apple Universal Dock will work with anything that has a dock connector: http://support.apple.com/kb/HT1380

Read/Write rights connecting NAS drive via USB

I made it. The AEBS is working with my external iomega hard drive, different users and an iTunes library with 130GB data. All files are shown correctly and I am having full access. Just one thing, which I can't handle actually: I connected the formatted harddrive to the AEBS, configured the users. I copied all files into the shared- and some into the user folder. When connecting the usb drive directly with the mac via usb, I don't have access to the folders (permission denied). Since I can't change the right when it's connected to the AEBS, how can I get access to my files with a direct connection? Just worried, in case that the AEBS makes problems, so that I can still access my files when connecting the hard drive directly to my mac.
Thanks for advice!

I haven't dealt with this yet, but my guess is you might have to plug the drive back into the AEB and remove the Users and Passwords. Once you plug that drive into the AEB and setup security on it, that information, I would assume is used like File Vault. It's setup on the actual drive, not the AEB.
Hope that helps,
AL

Need simple instructions to connect my piano to my mac using usb midi

I purchased a midi in/out usb connection for my Yamaha piano (clavinova clp120) and GB sees a midi device connected (in preferences) but I cant figure out how to use it...
I need simple step by step help.
Thanks!

ok, Let me get this correct...
Your piano is already hooked up to the mac via USB and Garage band sees it? correct?
Alright, now, when garageband starts it usually loads the profile for a grand piano or you can select "New Project" > "Piano". If everything goes well you should be able to select the "grand piano" profile and hit record, then you should be able to start playing , do you hear any sound??
If you want to use the LTP lessons then have your piano plugged in and start a lesson. As soon as it loads try hitting a key, do you hear anything??

Problem scanning from HP 1312 MFP connected via USB to Time Capsule

Hi,
I have a HP Color Laserjet 1312 MFP connected via USB to a Time Capsule. I can print through the Time Capsule without any problems but the HP Director software can't see the device hence I can't use the scanner on the device.
Please help!

If the scanning option is vital, just keep the MFP directly plugged into your Mac (via USB). Enable printer sharing via System Preferences. Note that the Mac does need to be on for the other machines on your network to print. If that's not an option, look into purchasing a USB print server to connect via ethernet onto your network.
Here is one:
http://www.linksys.com/servlet/Satellite?c=LProductC1&childpagename=US%2FLayout&cid=1115416942657&pagename=Linksys%2FCommon%2FVisit orWrapper&lid=4265722279L07

8220 unable to connect to Mac via USB connection

Similar Messages

Maybe you are looking for