827H router web setup not working
We were having problems with our 827H router, so I decided to reset it to the factory defaults and re-run the quick setup. I've done that before with no problems.
This time, after it loads the configuration in the web setup, it keeps checking the model, IOS version, etc.--over and over again. It won't stop, nor can we exit out of it to get to the quick setup.
Originally the router was connected to a hub. When we couldn't configure it from the web setup, we put the router directly onto a pc with an ethernet cable. We could ping the router. Using the console cable, we are able to see the router's settings. (See attached)
The pc was set to dhcp. The dns was originally set to "Obtain automatically". We also tried to set the dns and the gateway to the router's ip, and added the domain controller's dns as another dns server. Nothing has worked.
Any help will be greatly appreciated.
Thanks!
Your description of the symptoms is quite puzzling as is the console log that you sent. You say that you connected a PC directly to the router. Was that using a cross over Ethernet cable?
You say that when you connected the PC to the router you could ping the router. What IP address was on the PC at that point.
The console output that you included has a kind of garbled output in the show run. It looks as if two things were outputting at the same time. I am not clear if there were actually two things happening together or if the router is really messed up. (Though most of the config that showed up looked reasonable)
I would suggest that you connect to the console port again and capture all of the console output. I would suggest that whle you are connected and capturing output that you power cycle the router (it may be very helpful to see what messages go to the console while the router is booting).
After the router boots again, you may be able to use the web interface. If the web interface does not work you should be able to use the console interface to get a congif that should work basically.
Try these steps and post the output. Maybe then we can find a solution.
HTH
Rick
Similar Messages
-
My dad has a WRT54GS that we can't get the WEP key set. We can get onto the router site but when I click on the wireless tab it goes to an empty page. I thought it may be popups so I turned all that stuff off but it didn't work. Can anybody help me? Thanks
To view the router's web pages:
You do not need an Internet connection. The router's "web pages" are built into the router.
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
Point your browser to 192.168.1.1 , then login to your router. Your user name should be left blank. Your password is "admin" (with no quotes), unless you changed it.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Report back with this problem, and also state the make and exact model number of your modem (not the router).
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.
If the reset does not fix your system, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it. -
831 router....'loading cisco router web setup. please wait'
We just received a used 831 from our other office. I put in http://10.10.10.1 then click continue for the language. It comes to a screen that reads: 'Loading Cisco Router Web Setup. Please Wait...' thats as far as it will go. I'm not sure where to start I'm new to cisco routers. I have read the manual that came w/ it but couldn't find out any information. Your help will be greatly appreciated.
ThanksHello Brandon,
CRWS is a little bit buggy, try SDM instead, which is supposed to be the replacement for CRWS. YOu can download it here:
http://www.cisco.com/pcgi-bin/Software/Tablebuild/doftp.pl?ftpfile=pub/web/sdm/SDM-V231.zip&swtype=FCS
When asked for a user ID, just use anonymous/anonymous, it will allow the download.
If you cannot download, post your email address and I will send you the file.
You could also try another browser, such as Firefox:
http://www.firefox.com
HTH,
GNT -
RV215W router port forwarding not working
RV215W router port forwarding not working.
Port forwarding works for a short period of time, then stops working. Reboot router, works again for short period of time, then stops again.
I have updated firmware to latest. I had seen other similar bugs posted for 220 and I think 180, not sure if this router has similar bugs and waiting for fix release to firmware.
I had recently purchased two, one deployed, will hold off on other now because of issues, and may have to move to different unit if a resolution not found this week.
Dave Gritten
IT Director
Maritime Beauty
3695 Barrington St
Halifax NS B3K 2Y3
cell 902.223.9685
phone 902.429.8510 ext231
fax 902.422.7983
[email protected]
www.MaritimeBeauty.comIt's not just single port forwarding that has bugs, the entire router has bugs and simply does not work as advertised. I have found the following bugs/aspects of this router that just does not work correctly: 1. If you have to open ports, and who doesn’t, this router will eventually stop accepting packets from WAN>LAN. You will still have Internet access but no open ports. A reboot will fix this problem. Oh, by the way, this router has no scheduled reboot option! <--That would be a workaround but a welcome one for this router. 2. Firewall Access rules do not work!! Yep, a Cisco router and basic functionality simply does not work. I called Cisco and even though the tech saw the router not working denied it was a bug! Said we have to do port mirroring, setup a workstation with WireShark and capture packets so we can debug the issues. That would take several hours. I told him I would have appreciated if Cisco would have debugged the issues with their router BEFORE they shipped the units. Stay away from Cisco Small Business Routers. I wish I had. And if there are any Cisco die-hards out there willing to prove me wrong, just reply to this and please, prove me wrong that the RV series and specifically the RV215W is not JUNK.
-
Content Search Web Part not work for Office Web Apps
Hi ,
In Content Search Web Part word documents are not able to open in browser,but in document library its working.
Office Web Apps not work in Content search web part
Please help me
Regards
SachinBelow is the display template to open the document in OWA.
<html xmlns:mso="urn:schemas-microsoft-com:office:office" xmlns:msdt="uuid:C2F41010-65B3-11d1-A29F-00AA00C14882">
<head>
<title>AdSpace Picture on top, 3 lines on bottom</title>
<!--[if gte mso 9]><xml>
<mso:CustomDocumentProperties>
<mso:TemplateHidden msdt:dt="string">0</mso:TemplateHidden>
<mso:ManagedPropertyMapping msdt:dt="string">'Picture URL'{Picture URL}:'PublishingImage;PictureURL;PictureThumbnailURL','Link URL'{Link URL}:'Path','Line 1'{Line
1}:'Title','Line 2'{Line 2}:'Description','Line 3'{Line 3}:'','FileExtension','SecondaryFileExtension','ContentTypeId','ServerRedirectedURL'</mso:ManagedPropertyMapping>
<mso:MasterPageDescription msdt:dt="string">This Item Display Template will show a 304x100 picture of the item on top. The title and the default item description will display to the bottom of the picture with an additional line that is available
for a custom managed property.</mso:MasterPageDescription>
<mso:ContentTypeId msdt:dt="string">0x0101002039C03B61C64EC4A04F5361F385106603</mso:ContentTypeId>
<mso:TargetControlType msdt:dt="string">;#Content Web Parts;#</mso:TargetControlType>
<mso:HtmlDesignAssociated msdt:dt="string">1</mso:HtmlDesignAssociated>
<mso:_dlc_DocId msdt:dt="string">ZRMVMDDDEAE7-1-215</mso:_dlc_DocId>
<mso:_dlc_DocIdItemGuid msdt:dt="string">583b0835-32ff-4d1c-983f-b6ff4a0ef956</mso:_dlc_DocIdItemGuid>
<mso:_dlc_DocIdUrl msdt:dt="string">http://sp2013-dev-6:7000/sites/adspace/_layouts/15/DocIdRedir.aspx?ID=ZRMVMDDDEAE7-1-215, ZRMVMDDDEAE7-1-215</mso:_dlc_DocIdUrl>
<mso:HtmlDesignConversionSucceeded msdt:dt="string">True</mso:HtmlDesignConversionSucceeded>
<mso:HtmlDesignStatusAndPreview msdt:dt="string">http://sp2013-dev-6:7000/sites/adspace/_catalogs/masterpage/Display Templates/Content Web Parts/Item_PictureOnTop.html, Conversion successful.</mso:HtmlDesignStatusAndPreview>
</mso:CustomDocumentProperties>
</xml><![endif]-->
</head>
<body>
<!--
Warning: Do not try to add HTML to this section. Only the contents of the first <div>
inside the <body> tag will be used while executing Display Template code. Any HTML that
you add to this section will NOT become part of your Display Template.
-->
<script>
$includeLanguageScript(this.url, "~sitecollection/_catalogs/masterpage/Display Templates/Language Files/{Locale}/CustomStrings.js");
</script>
<!--
Use the div below to author your Display Template. Here are some things to keep in mind:
* Surround any JavaScript logic as shown below using a "pound underscore" (#_ ... _#) token
inside a comment.
* Use the values assigned to your variables using an "underscore pound equals"
(_#= ... =#_) token.
-->
<div id="Item_PictureOnTop">
<!--#_
var useWACUrl = !$isEmptyString(ctx.CurrentItem.ServerRedirectedURL);
if(ctx.ScriptApplicationManager && ctx.ScriptApplicationManager.states){
useWACUrl = (useWACUrl && !ctx.ScriptApplicationManager.states.openDocumentsInClient);
var appAttribs = "";
if(!useWACUrl)
if (!$isEmptyString(ctx.CurrentItem.csr_OpenApp)) { appAttribs += "openApp=\"" + $htmlEncode(ctx.CurrentItem.csr_OpenApp) + "\"" };
if (!$isEmptyString(ctx.CurrentItem.csr_OpenControl)) { appAttribs += " openControl=\"" + $htmlEncode(ctx.CurrentItem.csr_OpenControl) + "\"" };
var url = ctx.CurrentItem.csr_Path;
if($isEmptyString(url)){
if(useWACUrl)
url = ctx.CurrentItem.ServerRedirectedURL;
} else {
url = ctx.CurrentItem.Path;
var encodedId = $htmlEncode(ctx.ClientControl.get_nextUniqueId() + "_pictureOnTop_");
var linkURL = $getItemValue(ctx, "Link URL");
linkURL.overrideValueRenderer($urlHtmlEncode);
var iconURL = Srch.ContentBySearch.getIconSourceFromItem(ctx.CurrentItem);
var line1 = $getItemValue(ctx, "Line 1");
var setLineHeightRenderer = function(valueInfoObj)
if(!$isNull(valueInfoObj) && !valueInfoObj.isEmpty)
if(!$isNull(valueInfoObj.defaultValueRenderer))
return valueInfoObj.defaultValueRenderer(valueInfoObj);
else
return valueInfoObj.toString();
else
return " ";
var line2 = $getItemValue(ctx, "Line 2");
line2.overrideValueRenderer(setLineHeightRenderer);
var line3 = $getItemValue(ctx, "Line 3");
line3.overrideValueRenderer(setLineHeightRenderer);
var pictureURL = $getItemValue(ctx, "Picture URL");
var pictureId = encodedId + "picture";
var pictureMarkup = Srch.ContentBySearch.getPictureMarkup(pictureURL, 304, 100, ctx.CurrentItem, "cbs-pictureOnTopImg", line1, pictureId);
var containerId = encodedId + "container";
var pictureLinkId = encodedId + "pictureLink";
var pictureContainerId = encodedId + "pictureContainer";
var dataContainerId = encodedId + "dataContainer";
var line1LinkId = encodedId + "line1Link";
var line1Id = encodedId + "line1";
var line2Id = encodedId + "line2";
var line3Id = encodedId + "line3";
_#-->
<div class="top-content-box" id="_#= containerId =#_" data-displaytemplate="ItemPictureOnTop">
<div class="top-content-img" id="_#= pictureContainerId =#_">
<a class="cbs-pictureImgLink" href="_#= $urlHtmlEncode(url) =#_" title="_#= $htmlEncode(line1) =#_" target="_blank" id="_#= pictureLinkId =#_">
_#= pictureMarkup =#_
</a>
</div>
<h3 id="_#= line1Id =#_"><a class="cbs-pictureOnTopLine1Link" target="_blank" href="_#= $urlHtmlEncode(url) =#_" title="_#= $htmlEncode(line1) =#_"
id="_#= line1LinkId =#_"> _#= line1 =#_ </a></h3>
<span class="content-date" title="_#= $htmlEncode(line2) =#_" id="_#= line2Id =#_"><img class="cbs-Thumbnail" src="_#= $urlHtmlEncode(iconURL) =#_"
alt="_#= $htmlEncode(line1.defaultValueRenderer(line1)) =#_" id="_#= pictureId =#_" />_#=line2=#_</span>
</div>
</div>
</body>
</html>
Basically,ctx.CurrentItem.ServerRedirectedURL is calculated by a managed property ServerRedirectedURL which needs to be included in the display template.
Problem solved.
Nehal Bhandari,ATL, Nagarro Softwares -
Web links not working in iPhone calendar notes. Used to work. Ideas?
Web links not working in iPhone calendar notes. Used to work. Ideas?
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried?
-
Some web sites not working in FF but they are OK in Safari.
A couple of times lately I have had web sites not work correctly with Firefox. I need to switch to Safari to complete the tasks I needed to do. My FF is running on Mountain Lion and is up to date.
Thanks,
MJTHello michaeljt, the sites you have problem, is it with a lot of flash content ?
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Please reload the webpage while bypassing the cache using '''one''' of the following steps:
*Hold down the ''Shift'' key and click the ''Reload'' button with the left mouse key.
OR
*Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
See if this helps solve the issues you had and please report back to us!
thank you -
you must have connected the Time Capsule with a router that does not work with my direct cable from my ISP
I tried to answer in your other post.. please stick to one thread ..
What method of internet do you have.. is this fibre install.. if so the TC should just plug in and use dhcp in router mode.. press and hold the reset and it will go back to router mode by default. -
"no serializer is registered..." error with a web service not working
I'm using JDeveloper 10.1.3
EJB 3.0
I'm having issues with the web service not working after I create a client for it. The web service works fine up until I generate the proxy on the other side.
ERROR An error occurred for port: {http://buslogic/}MyWebService1SoapHttpPort: no serializer is registered for (class buslogic.runtime.....
I saved the file before I added the proxy and the wsdl looks the same between the working one and the non working one. I can not pin point the when the change to the web service is occuring. It seemed to work once all the way up until I had a ADF page trying to retrieve data, another time it failed when the proxy was created.
I can get the version that I saved to work immediately after the version that does not fails.
Any help would be greatly appreciated,
DanI'm using JDeveloper 10.1.3
EJB 3.0
I'm having issues with the web service not working after I create a client for it. The web service works fine up until I generate the proxy on the other side.
ERROR An error occurred for port: {http://buslogic/}MyWebService1SoapHttpPort: no serializer is registered for (class buslogic.runtime.....
I saved the file before I added the proxy and the wsdl looks the same between the working one and the non working one. I can not pin point the when the change to the web service is occuring. It seemed to work once all the way up until I had a ADF page trying to retrieve data, another time it failed when the proxy was created.
I can get the version that I saved to work immediately after the version that does not fails.
Any help would be greatly appreciated,
Dan -
Flash player download web site not working
After uninstalling flash player, I can't get the web site to reinstall it. I go to the web site click the agree and install now and gos to the next page but nothing pops up like it said it should.
http://get.adobe.com/flashplayer/thankyou/activex/?installer=Flash_Player_10_for_Windows_I nternet_Explorer&i=McAfee_Security_Scan_Plus&d=Google_Toolbar_6.3Hi eidnolb,
My OS is windows 7 Ultimate. There no Service packs listed Microsoft don't have one for it yet. My brower is Internet explorer 8 version: 8.0.7600.16385. My firewall is not causeing problems and the popup blocker didn't even activate.
Date: Wed, 14 Apr 2010 10:01:33 -0600
Subject: Flash Player flash player download web site not working
Hi newcomer76, Please post back your operating system and if any applicable Service Packs, any and all browsers that you use with the versions.
With that information, I'll be able to give you instructions and the links you need.
Thanks,
eidnolb
> -
The web controls not work(windows phone)
Hi
I have a web app.after I make an animation in this page(like a transition page in loading page), the web controls not work more.
the site is shown but any thing not work like scrolling or tap in linksCan you please explain more clearly what you are doing and what you need help with? What is your overall scenario, what exactly is your code doing, what behaviour do you expect and how is that different from what you actually see?
-
7520 All in one web services not working
I got notified of a new update for the 7520. When I tried to install it, the screen said it was successful but then said "updating....do not turn power off" and it freezes and the update never gets successfully installed and I have no web services. I tried reiinstalling the whole software package, restarted the printer multiple times and the router too and can't seem to find an answer. Anyone know what to do next?
bjg1,
Welcome to the HP Forum.
Assuming you can get to the point where you can get the software installed, you might be able to get Web Services back using the following workaround.
Suggested Workaround:
On the printer, Disable the web services -- that is, remove web services from the printer.
This may then allow you to then "Enable Web Services".
There is a consequence to this action: Your previously selected ePrint custom address will no longer be valid and cannot be reused. When you go back and log into your HP Connected account you may need to not only "add device" to re-add the printer to the device list of ePrint printers, you will have to select a new custom email address for that printer.
Where / how is this done?
Side Bar: The Disable Web services is usually done on the printer, although if the service is actually working, one can switch off EWS from EWS.
Disable EWS on the printer, wait a few seconds, and then Enable the service again.
Switching off EWS does not "break" your HP Connected account, although it does put a crimp in your printer's ePrint setup. You can still log into the HP Connected account where the printer and the ePrint account is managed. After EWS is disabled / enabled, you must log into your HP Connected account.
If you do not find your printer listed under the Devices tab, you can usually "add device" and add your printer right back into the list at this point.
If you do find your printer, but it won't cooperate, it won't update, you cannot "do" anything with it, go ahead and remove it.
If you have to "remove the printer", then Log out of HP Connected.
If you have to "remove the printer", then Walk around your house / office / back yard -- come back.
Log into HP Connected and use "Add device" to add your printer.
Update the ePrint email address to something new - add a number, think of something new and clever; it does not matter as long as the name is different.
Click the Kudos Thumbs-Up!
It is a nice way to say “Thank You" for the help.
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur -
SharePoint 2010 web analytics not working
Hello guys -I have setup a sharepoint farm, 1 app, 2 wfe (windows server 2008 r2) and sql server 2008 r2 DB. All service applications are functioning except web analytics. I have deleted and recreated again but still have no effect. It is creating
usage files.
interestingly Central admin site collection web analytics are working but when i check in a web application site collection web analytics report i have the below message.Not sure what I am missing. Can any one help me how to trace the issue:
There is no data available for this report. Here are some possible reasons: (1) Web Analytics has not been enabled long enough to generate data; (2) There is insufficient data to generate this report; (3) Data logging required for this report might
not be enabled; (4) Data aggregation might not be enabled at the level required for this report
Appreciate your help.
wm.Yes, they are also Started.
To make sure - I have checked off and re enabled usage data collection. Restarted the above services. And also re run the timer job "Web Analytics Trigger Workflows Timer Job
". nothing seems helping
I have set diagnostic logiging to Web Analytics Service - verbose both event and trace and observed the below:
02/04/2011 14:30:00.19 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 852e High Preparing to import '6' usage log files found with filter 'SHAREPOINTSER1-????????-?????.usage'. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:01.13 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 852n High Flushing usage entry cache to storage (count=1211). 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:01.13 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 85f9 High Calling ImportEntries method for usage definition 'Microsoft.SharePoint.Administration.SPTimerJobUsageDefinition' with
'47' entries. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:02.36 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 852u High Called ImportEntries method for usage definition 'Microsoft.SharePoint.Administration.SPTimerJobUsageDefinition'. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:02.36 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 85f9 High Calling ImportEntries method for usage definition 'Microsoft.SharePoint.Administration.SPRequestUsageDefinition' with
'1160' entries. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:02.91 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 884c High Calling 'UsageImported' method of Usage Receiver 'Microsoft.SharePoint.Administration.SPUsageReceiverDefinition' for
Usage Definition 'Microsoft.SharePoint.Administration.SPRequestUsageDefinition'. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:02.91 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 884d High Instantiating usage receiver 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:02.91 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 884k High Instantiated usage receiver 'Microsoft.Office.Server.WebAnalytics.UsageLogging.SPRequestUsageReceiver'. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:02.91 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 884n High Executing receiver method 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:03.47 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 884o High Executed receiver method. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:03.47 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 884m High Called 'UsageImported' method of Usage Receiver 'Microsoft.SharePoint.Administration.SPUsageReceiverDefinition' for Usage
Definition 'Microsoft.SharePoint.Administration.SPRequestUsageDefinition'. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:03.47 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 852u High Called ImportEntries method for usage definition 'Microsoft.SharePoint.Administration.SPRequestUsageDefinition'. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:03.47 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 85f9 High Calling ImportEntries method for usage definition 'Microsoft.SharePoint.Administration.SPFeatureUsageDefinition' with
'4' entries. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:03.56 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 852u High Called ImportEntries method for usage definition 'Microsoft.SharePoint.Administration.SPFeatureUsageDefinition'. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:03.56 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 852v High Flushed usage entries cache to storage. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.02 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 852n High Flushing usage entry cache to storage (count=432). 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.02 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 85f9 High Calling ImportEntries method for usage definition 'Microsoft.SharePoint.Administration.SPRequestUsageDefinition' with
'259' entries. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.25 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 884c High Calling 'UsageImported' method of Usage Receiver 'Microsoft.SharePoint.Administration.SPUsageReceiverDefinition' for
Usage Definition 'Microsoft.SharePoint.Administration.SPRequestUsageDefinition'. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.25 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 884d High Instantiating usage receiver 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.25 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 884k High Instantiated usage receiver 'Microsoft.Office.Server.WebAnalytics.UsageLogging.SPRequestUsageReceiver'. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.25 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 884n High Executing receiver method 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.38 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 884o High Executed receiver method. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.38 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 884m High Called 'UsageImported' method of Usage Receiver 'Microsoft.SharePoint.Administration.SPUsageReceiverDefinition' for Usage
Definition 'Microsoft.SharePoint.Administration.SPRequestUsageDefinition'. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.38 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 852u High Called ImportEntries method for usage definition 'Microsoft.SharePoint.Administration.SPRequestUsageDefinition'. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.38 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 85f9 High Calling ImportEntries method for usage definition 'Microsoft.SharePoint.Administration.SPTimerJobUsageDefinition' with
'172' entries. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.47 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 852u High Called ImportEntries method for usage definition 'Microsoft.SharePoint.Administration.SPTimerJobUsageDefinition'. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.47 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 85f9 High Calling ImportEntries method for usage definition 'Microsoft.SharePoint.Administration.SPFeatureUsageDefinition' with
'1' entries. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.53 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 852u High Called ImportEntries method for usage definition 'Microsoft.SharePoint.Administration.SPFeatureUsageDefinition'. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.53 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 852v High Flushed usage entries cache to storage. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.61 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 852m High Deleting usage log file 'D:\SHRPT_UsageDataLogs\SHAREPOINTSER1-20110204-1356.usage' after data import. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.61 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 852m High Deleting usage log file 'D:\SHRPT_UsageDataLogs\SHAREPOINTSER1-20110204-1401.usage' after data import. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.61 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 852m High Deleting usage log file 'D:\SHRPT_UsageDataLogs\SHAREPOINTSER1-20110204-1406.usage' after data import. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.61 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 852m High Deleting usage log file 'D:\SHRPT_UsageDataLogs\SHAREPOINTSER1-20110204-1411.usage' after data import. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.61 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 852m High Deleting usage log file 'D:\SHRPT_UsageDataLogs\SHAREPOINTSER1-20110204-1416.usage' after data import. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.63 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 852m High Deleting usage log file 'D:\SHRPT_UsageDataLogs\SHAREPOINTSER1-20110204-1421.usage' after data import. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:06.25 w3wp.exe (0x1154) 0x1098 SharePoint Foundation Unified Logging Service b8fx High ULS Init Completed (w3wp.exe, onetnative.dll)
sorry for duming more logs ..hoping if this insights anything?
Thanks. -
Router Port Forwarding not working since Mavericks
I have an iMac sat behind a BT Home Hub 3 (an ADSL router, if you're not aware), with several ports (POP3, SSH, HTTP, etc) from the outside world forwarded via the hub to my Mac. Since installing Mavericks (from Snow Leopard), NONE of these ports are now open.
They're open on the Mac, and another machine on my home network can use them locally, but from outside the network, they're hidden. Shields Up shows them as Stealth.
Things I've tried:
Rebooting everything.
Setting the Home Hub up again, forwarding all the ports again.
Turning all the sharing off in Mavericks and then back on.
Trying the same services on different ports.
Trying different services.
Turning off the Mac firewall.
Turning off the router firewall.
Trying the Mac on another IP address and reforwarding everything to the new one.
Putting the Mac in the DMZ.
I can forward ports to other devices on my network (e.g. my NAS) and they work fine, so port forwarding isn't completely broken on the router
Here's the thing though...
On a completely separate network, on a separate Mac (a 2012 MacBook Pro) that went from Mountain Lion to Mavericks, also behind a BT Home Hub 3, EXACTLY the same thing is happening. No ports can be forwarded to the MacBook Pro, but all the ports are open to the local network.
Any ideas? I'm pretty sure this must be a bug in Mavericks as I can't see anything else it can be.It's not just single port forwarding that has bugs, the entire router has bugs and simply does not work as advertised. I have found the following bugs/aspects of this router that just does not work correctly: 1. If you have to open ports, and who doesn’t, this router will eventually stop accepting packets from WAN>LAN. You will still have Internet access but no open ports. A reboot will fix this problem. Oh, by the way, this router has no scheduled reboot option! <--That would be a workaround but a welcome one for this router. 2. Firewall Access rules do not work!! Yep, a Cisco router and basic functionality simply does not work. I called Cisco and even though the tech saw the router not working denied it was a bug! Said we have to do port mirroring, setup a workstation with WireShark and capture packets so we can debug the issues. That would take several hours. I told him I would have appreciated if Cisco would have debugged the issues with their router BEFORE they shipped the units. Stay away from Cisco Small Business Routers. I wish I had. And if there are any Cisco die-hards out there willing to prove me wrong, just reply to this and please, prove me wrong that the RV series and specifically the RV215W is not JUNK.
-
Had to reset router, pass did not work, how to make secure again?
Password would not work, had to reset to factor. How do I make a new password and secure it again?
WRT5462Wireless Configuration: Manual Wi-Fi Protected Setup -------------------------------------------------------------------------------- This is where I am. I don't see anything that says create new user name.. help Wi-Fi Protected Setup TM Use one of the following for each Wi-Fi Protected Setup supported device: 1. If your client device has a Wi-Fi Protected Setup button, click or press that button, and then click the button on the right. OR 2. If your client device has a Wi-Fi Protected Setup PIN number,enter that number here and then click OR 3. If your client asks for the Router's PIN number,enter this number 51164188 in your client device. -------------------------------------------------------------------------------- Wi-Fi Protected Setup Status: Unconfigured Network Name (SSID): linksys Security: Disabled
Maybe you are looking for
-
How to open Camera Raw 8.8 from PS cs6
i like to work on my images from ps and after making some changes on PS cs6 open the image on Cameta Raw like in PS cs5 but I can't with this cs6 I usually go to camera raw like a couple times during my photo editing on PS
-
hi all, how do i display an order by in the rft file. For example, I have data grouped by periods, and then I want the periods to be displayed in assending order. IE. period 3, then period4, then period 5. thanks,
-
VM communication fail on HP broadcom network adapter
Hi All, I have HP DL380 servers with Broadcom network adapters. I have successfully created the team and select Dynamic as the load balancing mode. This team has selected for the virtual switch. My VMs couldn't communicate to each other. sometimes it
-
How can I intercept search-on-enter in RichTable?
Hi! JDev 11.1.2.0.0 I need to intercept the search-on-enter thing in the RichTable. I want to do some checks on the search fields before the search is executed, possibly canceling the query, and I want to bring up my blocking glass pane before the qu
-
I am planning on making a multiplayer game, but the thing is i have never made one before. I can use java with flash if that helps. Does anyone know a tutorials i can use to help me learn. Thank You