8310 continuous beeps when headphones attached

Hi, I've got a Blackberry 8310 v.4.5.0.180 carrier is VodafoneUK
When I plug in headphones I get a continuous beeping sound. The battery is fully charged.
Any ideas?
Thanks
Paul

Argh, I'm having the same problem!

Similar Messages

  • Satellite P10-504: continuous beeps when it is turned on

    My P10-504 emits continuous beeps soon after it is turned on. It will stop beeping and reboot itself but go back to the continuous beeps. The way to get it to boot is to hit F2 and go into BIOS and then exit, then it will boot up OK.
    I have depressed the keys when booting up to see if it might be sticky keys, but that has no effect.
    If I take the all the memory out when it boots up it beeps to tell me I have no memory. If only one bank is in the continuous beeps return.
    The one then it tends to do in Windows is to automatically bring up the search tool and constantly refreshes the screen unless esc is hit.
    Any ideas or other tests to do??

    Hi,
    I don't know where the problem is, but maybe you should try reinstalling the BIOS.
    If it doesn't help please contact the ASP in your country.
    Bye

  • Siri and music problems when headphones attached.

    sometimes when using siri with my headphones, siri may stop completely whilst in mid sentence or the phone may just lock itself. also when using headphones to skip music tracks, the music may jump by itself or pause itself, then when I click the button play for a few seconds and then pause again... can anyone help?

    Looks like this may be a design flaw with the headphone jack... https://discussions.apple.com/message/24167826#24167826
    This is very frustrating. I am having the same issue with my iPhone 5s. When I insert the apple original headphones into the jack and I am on a call, sometimes the call gets disconnected. When headphone jack is plugged in, Siri randomly pops up when the wire close to jack is even slightly moved. When I am watching an iTunesU video (with headphones on) the video sometimes continuously starts skipping 15s as if the 15s forward jump button is being repeatedly pressed. Apple, please fix this!!!

  • My classic 80GB ipod wont turn on, wont restore, it says it may be corrupted and all it does is constantly beep when I attach to my laptop! Windows Vista, 32bit, new version of itunes, etc.. WHAT the ****!? What do I do!?

    My 80gb ipod classic is dead! It wont power on, it wont restore, it constantly beeps and shows the apple logo then my laptop says ipod in recovery mode, may have to restore. I read all the other problems and they are similar to mine but have not found anyone saying the screen does not power on except to show logo and do not disconnect. The annoying beeping sound stops after a while, then absolutely nothing! Is the battery removable, what do I do?

    I did that and then tried to log onto the Itunes again and a prompt came up and siad the Itunes file wasn't properly installed and it might be corrupted and I should retry it again. 
    Let's try a repair install of iTunes.
    Restart the PC first.
    If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
    If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
    Can you launch your iTunes now?

  • Help pls! - continuous beeping and clicking sound on startup

    Hi everyone,
    I have had my mac mini for about 3 months and it has often made this continuous beeping when the mac starts up before I input my password.  Being new to a Mac, I thought this was normal as the sound goes away as soon as i type my password in.  However more recently it has made this sound a few times after i have logged in and there are no programs running, just the desktop showing on the screen.  When this happens, the noise stops when I press a key and then starts up again straight afterwards.  The only way to stop the noise is to restart.  I've looked through the guide about tones and what they mean but none of the tones seem to fit with what I'm hearing as it is a contonuous sound without any pauses and the power light doesn't flash or anything.  I have recorded the sound if that helps, but I can't see a way to upload it here.
    Does anyone have any idea what might be causing this, and if it's a problem what I should do?
    Thanks very much in advance
    Katie

    Hi BDAqua,
    Thanks very much! No it doesn't make the sound when I start up without keyboard attached and then as soon as I plugged it back in the noise started again so i think we've found the cause!  I am still using a Dell keyboard just because I can type so much better on it but I guess I will have to make the switch to a mac keyboard.  Unless there is something more I can do to configure the keyboard?
    Thanks
    Katie

  • HT4623 Iphone Beeping when connected to itunes.

    My iphone 5s screen went dark today.  I have tired to fix it by connecting to itunes.  It now does a continual beeping when connected.  Any idea how I restart the phone without access due to dark screen?

    Did you try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again?
    If this does not work, try to connect in recovery mode, explained here:
    iOS: Unable to update or restore

  • IMac continuously beeps three times when FireWire HDD is attached

    Hi there,
    Whenever I reboot my iMac while my external FireWire HDD is attached to it, it continuously beeps three times in a row. I detach it, and restart the iMac, and voila, it boots again!
    Any ideas why it can't boot while my FireWire HDD is attached to it? It doesn't seem to be a RAM issue as is specified here: http://support.apple.com/kb/HT2674?viewlocale=en_US

    It could be a firmware issue with the firewire drive.
    Have a look at the article in this link
    http://support.apple.com/kb/HT2213

  • My iphone has a black screen, when I attach the charger i get a beeping noise. It does not seem to be charging ?

    My iphone has a black screen, when I attach the charger i get a beeping noise. It does not seem to be charging ?

    try a reset, hold down the home/power button together until you see the apple logo and then release then wait for the phone to boot back up.

  • Dell Inspiron 15R wont turn on (continuous beeping)

    Dell Inspiron 15R (5537) suddenly wouldn't want to start. When boot up, nothing seem to appear, blank screen, no logo, no text, nothing. there is a continuous beeping, it not 2 beep or 5 beep or any number of beep, it just beep continuously, never ending, until I turn off the laptop. 
    Did some searching around on the web, forum, and so far I attempted:
    -Checked ram and hard-drive to see if it fully connect.
    -Turn off computer, unplug battery and ac power, press the power button for 30 sec.
    still haven't resolve the problem yet.
    Next, I try to do a Pre-boot System Assessment, FN+Power. Took SEVERAL attempt to finally got it to run Pre-boot System Assessment. Hold FN + Power, hear beeping, turn it off, Hold FN + Power, hear beeping, turn it off.
    Did that for about 20 times and finally got Pre-boot System Assessment instead of the beeping. 
    postimg.org/.../90zcsy193
    This is the result I got from it, Currently doing the remaining memory test. It taking a long time, ill have an update once that is done, it stuck on 98%. 

    DELL-Terry B
    This paper discusses troubleshooting steps for notebooks that are not turning on.  Typically it could be one of three issues,  No power (no power to the notebook), No post (the system has power but is not fully turning on), or No boot (the system has power, it is turning on, but it is not booting to the Operating system).
    From your post it is obvious that the notebook has power,  but it isn't fully turning on.  I would have to say that this is a No post problem. This paper will go over further troubleshooting steps to help determine the problem.
    If the notebook is not starting up or showing a blank screen:
    Remove any peripheral devices that are attached to the computer.
    Peripherals include:
    Printers
    Scanners
    Media Card Readers
    Mobile devices such as smart phones or tablets or portable digital assistants or MP3 players
    Digital cameras or video recorders
    USB storage devices
    Remove the computer from a docking station if it is in one
    Remove any CDs or DVDs in the optical drive
    Remove the AC adapter from the computer and remove the AC power cord from the wall outlet.
    Remove the computer's battery. For instructions on how to do this, consult the Online Owner's Manual.
    Press and hold the computer power button for 15 seconds.
    Insert the AC adapter plug and make sure it is seated properly.
    Plug in the AC power cord to a known good working outlet.
    Press the power button to see if the computer turns on.
    If the computer starts, turn it off and put the battery back in.
    Press the power button to see if the computer turns on.
    If the computer starts, turn it off and continue replacing peripheral components until you determine
    which one is causing the failure.
    Please let me know if this helps out.
    TB
    I did what you told me, there is power coming it, it just wont start, like i can hear the fan running, the power led is lid up, it just wont boot into anything, screen is blank and there is a continuous beeping sound, beep ... beep ... beep .. beep..  beep ... beep ... beep .. beep..  beep ... beep ... beep .. beep..  beep ... beep ... beep .. beep..  beep ... beep ... beep .. beep..  beep ... beep ... beep .. beep.. it goes on and on.
    if i keep turning it on and off, if im lucky, very rarely, it boot into the OS or into Pre-boot System Assessment. Once it boot into the window OS, i attempt to do a factory reset, but as soon as it restart it fail to continue and just beep.
    any other suggestions?

  • Continuous Beeping noise on Startup and at other times

    My iMac is over a year old. I have no idea what is wrong or happening here but below is what happens.
    I hear a continuous beeping noise from my iMac at times. I had Firefox open and when it started beeping, a little search bar opened up at the bottom left of the browser so I assumed it was a sticky key on the keyboard so I pressed the spacebar and the beeping stopped and the search bar disappeared. This happened a few more times while I was using the browser.
    The other day I started up my iMac and before it opened to the desktop it showed a small iMac HD icon so I clicked it and it started up normally, but then the beeping started so I just hit the spacebar and it stopped. Now I do remember after I turned the iMac on I accidently pressed some keys on the keyboard so this maybe why it showed the HD icon but I don't really know.
    Yesterday morning I turned the iMac on and came back to hear it was beeping again. It was just a fast non stop beeping, too fast to count the beeps. It had loaded into the desktop so it was all good apart from the beeping, again I pressed the spacebar and it stopped.
    Yesterday afternoon I got more beeping. Beeping is not just on startup it must be something else. I was using Firefox and was trying to scroll down the page, yet it kept jumping back to the top not letting me scroll down. This happened the other day when the beeping started. Anyhow I closed the browser and the beeping starts. I was able to turn the sound down and that got rid of the beeping, turned the sound up and the beeping still there.
    I tried this so far...
    unplugged keyboard and started up mac = no beeping
    plugged keyboard in and started up mac = beeping
    Again this morning I turned my iMac on, and beeping happened again, this time I clicked System Prefrences and the beeping stopped. I then clicked the Sys Pref folder red icon to close it and it made a different noise, but closed. I then opened up Firefox and went straight to my bookmarks to find a link, it wouldn't let me scroll down my list of bookmarks either, then the beeping started so I closed Firefox. Then I heard a loud sratchy type noise, it was much louder and hearing this has now made me think, something is not right.
    Firefox version - 3.5.3
    Mac OS X version 10.5.8
    I don't want to set PRAM or those settings yet unless it's needed as I don't know what settings/network etc it will remove or change.
    I appreciate any help:) thanks

    You may have switched on [http://kb.mozillazine.org/accessibility.browsewithcaret caret browsing].
    You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
    See http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
    * Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"

  • No boot, continuous beeping

    Hi All,
    My wife's macbook air (13 inch late 2010 model) no longer boots. The screen does not come on (no grey boot screen) and when powered on there is continuous beeps. ~1 second beep, 2 seconds silent, 1 second beep. It will continue to beep as long as you let it. Pressing the power button turns it back off. The fan will start to run on high if the computer is allowed to keep beeping for more than about 10 seconds.
    Any ideas? Thanks

    Hardware failure; most likely bad RAM.

  • 3 Beep when i try to boot Snow Leopard (after memory and sad upgrade)

    Good night,
    I have a Macbook Pro Later 2011 with Yosemite installed and today i tried to upgrade memory and SSD.
    Memory: 16GB 1600MHz DDR3 (2x8) Corsair 11-11-11-30 1.35v
    SSD: Corsair 120GB Sata 3 Force GT
    After installation of my new gear, i tried to install OS X Snow Leopard through DVD and i get this 3 beep when boot start.
    So i reinstalled the original hard drive, keep the new 16gb and started correctly.
    Tried boot DVD again with the original hard drive and new 16gb but the 3 beep continues...
    Then i removed the 16gb, but still doing this 3 beep stuff when i try boot from DVD.
    I tried all combinations with new and old hardware but nothing more works...
    I have changed the slots with both, the 16gb and old 4gb.
    Could be the DVD corrupted?
    Now im running my Yosemite with the original hard drive and the new 16gb memory without any issue.
    Im already do the memory test nothing wrong appear in results
    My configuration:
    MacBook Pro (17 polegadas, Final de 2011)
    Processador 2,4 GHz Omte; Cpre i7
    Memória 16 GB 1600 MHz DDR3
    Gráficos Intel HD Graphics 3000 512 MB
    Could anyone help me plz?
    ps. sorry for my english

    The DVD's too old for that Mac. If you need to install an OS on it, connect it to the Internet and start it up with the Option, Command, and R keys held down.
    (110037)

  • My MacBook Pro beeped when I started up. Never happened before. I want to get it looked at, but I'm living in Antalya, Turkey right now. I will be in Athens, Greece until January 1st-are there any Apple stores in Athens? Please help. Thank you.

    I have a mid 2012 MacBook Pro and it started to beep for the first time when I started up today. I think it was 3 continuous beeps then a pause. It sounded like an alarm and totally freaked me out. Then I pressed the on/off button for about 5 seconds and it restarted. I was able to get online, but then I had trouble with the trackpad, which is okay now. I have AppleCare and want to take it to an Apple Store, but I'm currently residing in Antalya, Turkey. I will be in Athens, Greece until January 1st. Are there any Apple Stores in Athens, Greece that I can take it to or Antalya, Turkey???  Thank you.

    https://locate.apple.com/gr/el/

  • Why does iPhone beep when charging

    My iPhone continues to beep when charging....can anyone tell me how to stop the beeping

    When you say "beep" you mean the sound it makes right after you plug it in? If so, you might have a faulty cable or USB port, so your iPhone will beep everytime it gets disconnected and reconnected to the computer. If it's not that, try to describe the sound. Is it similar to what other sounds on iPhone system?
    JP

  • Beep when done not working

    I'm setting preferences in Photoshop CS6 and I'm trying to figure out how "Beep when done" works. Whether this option is on or off doesn't seem to make any difference.  I never hear any beep.  (I'm working on a Mac and I have my volume turned up).

    Noel,
    Much time has passes, and the brain is not what it was, but I thought that Beep When Done was part of things, at least back to PS version 3.0 (not CS 3), but I could be wrong.
    Way back, I was on a hotrod computer, but let's admit, it was 1/1,000th of what most folk purchase at Best Buy today for an "entry-level" computer. I was doing triple-truck ads on it, and it was as stout as was possible, in that day. I had to do a Save_As, and then write that file to tape, before I felt comfortable to continue. We are talking maybe 30 - 45 mins. for that. Beep When Done would wake me up, and I knew that I could then edit some more. Many nights of nodding off at the console, and then grabbing another coffee, for the next operation. If I am wrong, I will bet that it is not off by more than one version.
    Now, with workstations being what they are, I cannot remember the last time that I invoked that feature.
    Hunt

Maybe you are looking for

  • I need a recovery disk

    My cousin has formatted my recovery partition and now I cannot refresh or reset my netbook to its factory settings. Is there a way that I can retrieve it or get another one? I am using HP Pavilion TouchSmart 14-b114se Sleekbook Serial Number: [Person

  • Using a MacBook Pro in the Store

    I'm in the Apple Store in Walnut Creek, CA, using a MacBook Pro. They have a few on display and it's 2 hours before closing -- nobody's using them...weird. Anyhow, onto my impressions: This magnet thing is stronger than my powerbook adapter! I think

  • How to download a CSV file to a shared network folder ?

    Hi Experts, I have created a report which exports a CSV file on application server using scheduled background job. I have used the OPEN DATASET feature to download the file on a location on the application server which is working fine. But my require

  • Skype crash

    I need help  All you can see in this video  https://www.youtube.com/watch?v=WwxdT3DoKy8&feature=youtu.be Solved! Go to Solution.

  • Recently, i photo will not close on my macbook pro.

    I have to force quit it says Iphoto is not responding. I am using lion 10.7.5