8310 - Shuts off EVERY 10 seconds when not charging!

I just got my 8310 last night, and realized it needed charging. After spending 20 minutes with it, it FINALLY decided to start charging *idk why it just wouldn't at all, but at least now it does *
So I wake up today *saturday*, and I notice it's working much better, however whenever it is unplugged from my computer, the screen shuts off, a red light is displayed *where the green fully charged light, or the yellow charging light is displayed*, and one of two things happen when I press the ball in:
A. It completely shuts off, and turns back on, with the hourglass, which takes ~2-5 minutes for it to do anything *usually this one*
B. It goes back to what I was doing
I've tried everything! The only thing I cannot do is call Tech Support *something about needing an account subscription or something?*. As I said earlier, I JUST bought the phone within this week, and had not yet even opened it since late last night.
Thank you for your time
Edit: forgot to add this: the battery is FULLY Yellow *meaning that it is fully charged... right?* so.... yeah.
Solved!
Go to Solution.

It sounds like the phone's OS may be corrupted. Perform a clean installation of your OS: www.blackberry.com/btsc/KB11320
Be sure to backup phone data first: http://www.blackberry.com/btsc/KB12487
Kijana
Please remember to:
1. Mark Accept as Solution on the appropriate post once your issue has been resolved
2. Give Kudos to helpful posts (click the star next to the post)
Thanks

Similar Messages

  • Why does my iPad mini keep shutting off every two seconds?

    Why does my iPad mini keep shutting off every two seconds?

    I doubt that anyone here can answer that question with any validity...
    That being said, try to reset the device:
    *Device reset*
    Device Reset (won't affect settings/data/music/apps/etc)
    1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
    2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
    3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

  • New HP wireless mouse turning off every 30 seconds until clicked

    I just bought a brand new mouse...HP x3000 Wireless Optical Mouse Black and it keeps shutting off every 30 seconds or so and I have to click it to get it on again.  Is this a battery saving feature?  And how can I turn it off?  Thanks

    Hi 52Tele,
    Welcome to the HP Forums!
    I am sorry, but to get your issue more exposure I would suggest posting it, in the commercial forums since this is a commercial product. You can do this at HP Enterprise Business Community.
    Hope this helps, and have a great day.
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • My ipod classic turns on with apple logo then shuts off about 30 seconds later, when plugged in my windows and itunes will not recognize it.

    earlier my itunes told me that my files were corrupted and I needed to restore, so I did.  In the middle of the restore I lost internet connection. Now my computer and Itunes will not recognize my Ipod and if it is not plugged in when I turn the Ipod on it only shows the apple logo then shuts off after 30 seconds.  If it is plugged in it will charge, but Itunes and Windows will not recognize it.  I have tried the menu + select shutoff multiple times with no change.  All it will say while it is charging is do not disconnect.

    The clicking sound is your iPod Hardisk, trying to retract and find the boot sector unsuccesfully.
    Hopefully, you can do the iPod Disk Diagnostic as in this great post by tt2., it wont fix your problem, but let you know, how dire is your Hardisk health.
    So only as a last resort, one way, to get the stuck Hardisk head free, is to bang the iPod on a rubber mouse pad, when you reset it, but do it at your own risk, some very lucky guys got it working again for the next 14 months, like myself.

  • My 4s iphone will not restart. It also pings every few seconds when plugged in.

    My 4s iphone will not restart. It also pings every few seconds when plugged in.

    ShaheenFromBrighton wrote:
    will not do anything, but when plugged in it goes to appleboot logo then shuts off, i left it in rice hen in the sun, all visible damage has gone, bubbles mist etc,it will not restore either. however i put it in dfu mode and itunes rcognised it,plz help, thanks
    You'll need a new phone, now or later is up to you

  • My imac (intel core i5, OS 10.10.1) shuts down every night and will not "wake up" next morning -- it never used to do that -- if I hold down the start button more than twice for many seconds, then it will finally boot up and works fine all day – I've

    my imac (intel core i5, OS 10.10.1) shuts down every night and will not "wake up" next morning -- it never used to do that -- if I hold down the start button more than twice for many seconds, then it will finally boot up and works fine all day – I’ve tried shutting it down and unplugging it, and that does not work -- I’ve run disk utilities checked permissions, and run anti-virus and get no adverse results – I cannot figure out what is different that causes this problem

    From previous experience 3 indicates a shutdown initiated by the SMC (System Management Controller) — hardware responsible for many low-level functions including power, sleep, lights, and fan activity.
    Try resetting it:
    Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset. Read all the steps.
    Before Resetting the SMC
    Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
    Press Command + Option + Escape to force quit any application that is not responding.
    Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
    Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
    Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
    Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.

  • My Facebook shuts down unexpectedly every 3 seconds when I tried to log in. I tried uninstall and reinstall but still nothing works.  The App got updated and now I don't know how to fix it. I love using FB on my iPad.  Pls tell me how to restore it back.

    My Facebook shuts down unexpectedly every 3 seconds when I tried to log in my iPad.  It leaves an empty blank page and goes back to FB App.  How can I restore it back to normal.  I tried uninstall and reinstall the FB App many times but nothing works.  I love using FB on my iPad. Please help.

    well it seems that I completely hosed everything, plus I actually want to try out the 0.5 new installer, etc., so I'm just going to reinstall and pay more attention this time :oops:...thanks for all the help and advice

  • When I stream music from my MacBook to speakers via airport sound stutters on and off. When I do so from iPhone all is fine.  Can't seem to find any settings to change   Tried to shut off firewall but settings will not let me.  All software up to date.

    When I stream music from my MacBook to speakers via airport sound stutters on and off. When I do so from iPhone all is fine.  Can't seem to find any settings to change   Tried to shut off firewall but settings will not let me.  All software up to date. Thanks for any suggestions

    2. not that I know of
    been looking for something a bit like it got an old ipod thouch in a audio dock in the kitchen and want to give it access to all my music not just play what is synced
    so far my only options is to get an app to use upnp to get the music directly from my nas
    or get some app which require the computer to be running and running some program to handle it
    and as far as I can tell getting access to stuff synced on the atv is a no go

  • HT1338 why does my imac keep making a noise every 30 seconds when I am not using it?

    My iMac keeping making a sound (sort of a clicking sound) every 30 seconds when I am not using it. It is very annoying; is therre a way to stop it?

    Bring it in to service, and ask them to tell you what the noise is.  Sometimes it just is the optical drive realigning itself.   It could be the sign of a dying hard drive.  Only they can tell the difference.

  • HT4623 my iPhone 5 will not turn on.  The apple comes on and off every 4 seconds.  I tried a hard reset.  I tried connecting to Itunes.  Wazup?

    my iPhone 5 will not turn on.  The apple comes on and off every 4 seconds.  I tried a hard reset.  I tried connecting to Itunes.  Wazup?

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...

  • Macbook Pro freezes, shuts off for 10 seconds, and then returns to normal

    My 13.3" Macbook Pro has this issue of shutting off for 10 seconds and then turns back on to normal. Usually it happens whenever I wake the laptop with the lid open, whenever I open the lid "too fast" from clam shell sleep, and whenever I reopen the lid after when I realized that I needed to check something else. Every time I start using the Macbook Pro from these situations, everything works fine for about 20 seconds and then suddenly everything freezes and shuts off temporarily. Then after about 10 seconds, everything turns back on again. I do not know why this occurs, but I had this issue the 3rd week I purchased this. Is this a normal thing or is this an issue with possibly the motherboard?

    take a look at this topic, maybe will help:
    http://discussions.apple.com/thread.jspa?threadID=2420192&tstart=15

  • Any program in finder blinks off every 5 seconds I have to hit the program to activate

    Ihave an issue in finder any program I have open wil blink off every 5 seconds I will have to hit the openprogam to activate 5 seconds later it blinks off anyone have this issue? using OS9.2 Mavericks. Thanks Harold

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—again, the text, not a screenshot. I know the report is long. Please post all of it anyway.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • EA4500 Internet Port Cycles On and Off Every Few Second

    I bought a EA4500 to replace my old WRT54G earlier this year.  At first the router worked fine.  After the automatic firmware upgrade to Cisco Connect Cloud, I was never able to get the Connect Cloud stuff to work, constant 500 Internal Server errors when trying to access the router with the Internet cable attached.  So I downgraded back to the old firmware and all was well again.  Then I started having problems a few months ago, when I would wake up in the morning, the router would be cycling the Internet port on and off.  I could usually reboot everything and it would work the rest of the day.  I lived with it like this a while, and support couldn't seem to find anything wrong.  Eventually it started getting worse, until the point I could hardly ever get it to stay connected.  I got Cisco to RA the old router and I figured problem solved.   Now while the EA4500 was gone, I used my WRT54G again, and everything worked fine for nearly two weeks while I was waiting on the replacement EA4500.
    So today the new EA4500 showed up, I connected and configured it, and it worked for a short time.  Then suddenly I lost Internet, looked up at the modem and the LAN light was going on and off every few seconds.  So I'm back in the same boat as before.
    I've tried changing cables, same setup works fine with the WRT54G.  Modem works fine with WRT54G and connected directly to the computer, zero problems.  I tried lowering the MTU, turning on MAC address cloning, and various other things.
    My modem is a HughesNet HN9000.
    Any suggestions or ideas would be greatly apprecaited.
    David

    OK, the setup as is works fine with the WRT54G, just the EA4500 has the issue.  It started working again last night, and was working this morning.  It continued to work until about 3:15 PM today, and out of the blue, my computer came up and said the Ethernet connection went off, then it came back on, it did this several times...at the same time, I looked up at the modem, and the LAN light was going on and off on it also.  So the router was cycling both the Internet and Port 1 on and off.
    My HN9000 has a static public IP, and the IP it's DHCP server gives out is one digit different than it's own IP.
    My router is set this way, and this is what it gets if I switch the Internet to Automatic (DHCP):
    IPv4 Address: 97.xxx.xxx.194
    Subnet Mask: 255.255.255.252
    Default Gateway:  97.xxx.xxx.193
    Then there are two DNS server addresses.  I've tried the router setup as Static IP or Automatic (DHCP) and the problem occurs either way.
    The HN9000 seems to pass all incoming traffic straight to the router.
    One the LAN side, the router is configured to give out IP's in the 192.168.1.x range, and I have some static leases set.  The router is 192.168.1.1.
    Everything works with the computer connected directly to the modem, and with the WRT54G in place of the EA4500.
    As far as calling Hughes, they won't support the router.  If it works without the router, and with another router, they will say it's a problem with the router, which I think it is, just not sure what.  Also, just to be clear, I do loose Internet access on my computer when the router acts up, but the HughesNet modem remains connected to the Internet.

  • Shooting a video works sometimes, but sometimes it shuts off after one second without recording any video

    Have had the Turbo Droid for only 3 days and just tried to shoot video. Twice it worked, but more often it seems to begin recording, but shuts off after one second without recording anything.
    Not sure what I'm doing wrong to cause this to happen.
    Can you help?
    Thanks!

    Thanks, EfrainM_VZW.
    Haven't seen any error messages. Occasionallly, but only rarely, the video will record 1-2 frames, but most of the time it just shuts down. I have tried it with and without the rubber-grip case; taking off the case had no effect. The video still would not function.
    When you tap the video camera icon, it tries to shoot video and seems to begin to record, but one (or two) second(s) later, it beeps and stops. Rarely with a frame or so of video; mostly nothing is recorded.
    The still camera works great! Love being able to touch it anywhere to grab a snap.
    BTW, my partner and I got identical phones at the same time last week. His video has the exact same problems as my phone.
    Another point: I downloaded the Google Camera and can shoot video just fine through that camera. But not through the stock Motorola camera that came with the Droid Turbos.
    I'm starting to think we got phones from a defective batch.
    What do you think?

  • My 3GS phone, the earpiece speaker shuts off about 5 seconds into phone calls.

    My 3GS phone, the earpiece speaker shuts off about 5 seconds into a phone call, Is this an easy user correctable software fix or a hardware problem that requires service?

    Yes. Apple doesn't repair most problems.  If out of warranty, you may be eligable for this:
    Out-of-Warranty Service
    If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
    iPhone model
    Out-of-Warranty Service
    iPhone 5s, iPhone 5c,
    iPhone 5
    $269
    iPhone 4s
    $199
    iPhone 4, iPhone 3GS,
    iPhone 3G, Original iPhone
    $149
    A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in U.S. dollars and are subject to local tax. When setting up out-of-warranty service, Apple will request credit card pre-authorization for the maximum service fee listed above.  This amount will be deducted from your credit limit. The final service fee we charge will be determined during testing and may be less than the service fee listed above.Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPhone that has failed due to contact with liquid may be eligible for out-of-warranty service.Apple reserves the right to determine whether or not your iPhone is eligible for Out-of-Warranty service. iPhones that are repaired or replaced have a 90-day limited hardware warranty or assume the remainder of your standard warranty or AppleCare product coverage, whichever is longer. Please see Apple's Repair Terms And Conditions for further details.

Maybe you are looking for

  • Problem with syncing AD users (LDAP)

    I am running into a 'problem' with syncing users from ad. I'm pretty sure i'm doing something wrong but i can't figure it out. When i sync manually the 'pop up' shows that it's synchronizing and after a few seconds it tells me "OK". But there are 0 u

  • Not able to use my recently purchased iPhone5c

    I recently bought an iPhone 5c from someone, and I went to activate it at the Sprint store and they said it was still connected to the other guy's account. I can't contact the guy. Please help me, I would like to be able to use this phone...

  • How to get the Output File Name as One of the Field Value From Payload

    Hi All, I want to get the Output file name as one of the Field value from payload. Example: Source XML <?xml version="1.0" encoding="UTF-8" ?> - <ns0:MT_TEST xmlns:ns0="http://sample.com"> - <Header>   <NAME>Bopanna</NAME>   </Header>   </ns0:MT_TEST

  • How to pull up contact when sending new mail

    Is there anyway to show contacts when sending a new e mail.  Example on windows it will sow all contacts and then click on the ones you want to send to.  Is there anyway to do this using Macbook Pro with Lion 10,7.4

  • Populate Uocdropdownlist dynamically

    Hello experts, I have a requirement to build a custom RCDC UI. It should contain two dropdownlists  1. Regions 2. Organizations We have fixed number of regions for which I have used XMLDatasource. <my:XmlDataSource my:Name="regions"> <Regions> <Count