8320 not reading Battery level correctly

After my battery needed to be replaced I bought 2 new OEM C-S2 batteries, 1 for the phone and 1 spare.
The problem is that after being on charge for 2 hrs 8320 said the were drained and powered off.
However I ....
tried them on 8300 and 8310 and both said they were fully charged.
tried with my 7100v and it too said they were full.
tried doing an update and downgrade on the OS. No change.
tried having the phone on charge for 2 days. No change.  
This is totally confusing me. The phone is way past its warranty. I really don't want to but does anyone have any ideas before i bin it?
Its my first BB and I've grown quite attached to it. Now having to use old BB 7100v.

PC Charging is the Worst What i would Recommend is a H.T.C charger And buy a  H.T.C  O.E.M Battery a Extended Type if Possible.
These two Items at Android Central Cost about what the The Battery it Self cost. Just a Few Months Back Please give these a Look i don't think you will be disappointed.  The Battery Cost $34.99  the Charger $14.95  plus a little for S&H.. b33

Similar Messages

  • Is that normal? My iPod touch G5 standby after fully charge 2 hr 58 min. then level battery is 68.5%. (use voice over to read battery level)

    Is that normal? My iPod touch G5 standby after fully charge 2 hr 58 min. then level battery is 68.5%. (use voice over to read battery level)

    I do not understand what "My iPod touch G5 standby after fully charge 2 hr 58 min." means.
    Also % battery is not accurate for an iPod. It fluctuates.
    Maybe this will help:
    iPod Toch 5G (iOS 7.0.3) charges way...: Apple Support Communities

  • Thunderbolt Not reading Battery Correctly

    Hey there!
    I have been searching the net for this particular problem I am having and sofar have found nothing, so I was hoping maybe you guys could help me out.
    My Thunderbolt after fully charging the battery will show at the highest about 60% battery life, if not lower. This morning for example it would only show 29%. I have bought 2 additional extended batteries for the phone, both will show around the same percent when fully charged.
    I have tried doing the whole battery calibration "thing", with no success whatsoever. One time, after my phone died; I took the battery out of my phone and put it in my friends phone and it showed 82% remaining, yet my phone would say 0% and die. I have done multiple Factory Resets as well.
    I've heard of a few other people having this problem and just warranting back the phone, but thats the problem. My warranty ran out a couple months ago. I had to replace my thunderbolt twice for random annoying issues, and when I got my Third phone (current), the battery wouldnt charge past 80% but i figured the battery was going out and not that big of a deal. The warranty ran out a couple months after I received my current phone so I decided to finally by addition Extended Batteries. And here I am. -_-
    At most the battery will last maybe 3 hours under use, 5-6 with light use. If i leave it in standby, maybe around 8 hours. And this is with the Extended battery!
    When my Phone dies, I am capable of pulling the battery out, waiting a minute, and putting the battery back in and wala! it will have a sudden 2-5% of battery life left again. I can usually do it 4-5 times before it wont work anymore.
    Occasionally the phone will drain fast, get to anywhere from 19-2% and just sit at one specific percent for a few hours.
    I have tried multiple charging cables including: Car Charger, Stock Phone Charger, Offbrand wall charger, and PC-USB charging.
    I am thinking my phone is not reading the battery voltage correctly. When my phone stops charging, or really just sits at a random percent for forever, it shows roughly 3.822V. When the battery is "dead" according to my phone, it shows around 3.6 - 3.5V. I'm not completely sure if that is normal, or even relevant.
    Any help would be most appreciated, thank you! And I apologize for the long post.

    PC Charging is the Worst What i would Recommend is a H.T.C charger And buy a  H.T.C  O.E.M Battery a Extended Type if Possible.
    These two Items at Android Central Cost about what the The Battery it Self cost. Just a Few Months Back Please give these a Look i don't think you will be disappointed.  The Battery Cost $34.99  the Charger $14.95  plus a little for S&H.. b33

  • ITunes not reading ID3 tags correctly

    I have an album of mp3s, all correctly ID3 tagged (WinAMP and Windows Media Player read them fine), and when I try to add it into my iTunes library, it only add it as the filename. It does not read the artist, album, or track name from the tag.
    It is strange that it is able to read some of the id3 tags but not all.
    iTunes 6.0.4   Windows XP Pro  

    Something else on your system is probably changing the tag outside of itunes. For instance, WMP is set to get album info from the internet.
    iTunes isn't constantly scanning your library for any little tag change (a good thing, otherwise it would use 100% CPU all the time). When you go to play it or get Info, it DOES read the tag info.
    Then again, I might not understand your itunes preferences settings. I have mine set for itunes not to organize my files and not add them to the itunes library.

  • Apple DVD Player software not reading SPRM 4 correctly.

    I am a DVD author and have recently run into an issue with Apple DVD Player not reading SPRM 4 (current title) correctly. I know this isn't the Apple DVD Player forum, but there doesn't seem to be one for that application, so here I am...
    I have a disc (not authored in a Mac environment) that uses the value of SPRM 4 to track the last title played, and if it happens to equal the value of the main feature title, then use the "PLAY" button on the main menu as a resume.
    Apple DVD Player seems to think that SPRM 4 equals this particular value all the time, regardless of what title last played, which is totally breaking my disc. The real kicker is that the disc works flawlessly on set-tops and in a windows environment.. just not on any Mac that I have tried.
    Has anyone out there also experienced a problem with tracking SPRM 4 in Apple DVD Player? Is anyone from Apple reading these things, possibly someone who can flag this as a major issue?
    I am positive that this specific to Apple DVD Player, because the disc works as intended EVERYWHERE else.
    I have tried and experienced this issue across several Macs, and across several versions of DVD Player. It's consistent across all.
    If anyone has any ideas, please respond.
    Thanks,
    Ben

    these problems are well documented, use the search functions for plenty of solutions

  • Aperture Vault Does Not Read Drive Space Correctly

    Aperture 3 Vault does not read the disk space correctly on my newly formatted LaCie 500GB drive, and produces an error message that says there is not enough space to update the vault.
    Finder and Disk Utility both indicate that the drive is completely empty. Any help in resolving this problem will be appreciated.

    Just some thoughts
    1. Check ownership on the drive, everyone can read and write. (& it is MacOS formatted)
    2. Check the permissions in your library, it is possible that there is a file with a permissions conflict (only attributable to the fact that computers are programmed by human)
    http://support.apple.com/kb/HT3805
    Tony

  • Safari not reading Arabic website correctly

    Dear Experts,
    Is there a way to add fonts to Safari? Cause when i open some arabic websites i am not able to see the website font displayed correctly. I am using ITouch with the latest update. Your feedback is highly appreciated.
    Regards.
    E

    Unfortunately, character encoding errors are a significant problem in both Safari and Mail. Apple needs to add a function for users to be able to specify the encoding for a web page or mail message. When Safari or Mail guesses wrong, there is no way for the user to manually select the correct character encoding.

  • Text_io using webutil not reading all characters correctly

    Hello all,
    is anyone familiar with this problem: using client_text_io to read a word-generated html-page. With Forms 4.5 using text_io this worked fine, with webutil certain chars are not transferred correctly (getting upside down question marks in the text). Is the charset that is supported by client_text_io smaller than the charset supported by text_io?
    Note: forms on web are started with the same NLS_LANG setting as the old 4.5 C/S forms.
    Regards, Ron

    Webutil does not currently do any characterset translation for you. So if your Forms Server is running in a character set which is not the same or not a superset of the one on your client you can have this issue

  • PCI6534 not reading the data correctly

    Hi,
    I am using PCI6534 to read the digital data from out of ADC. I am using port 2 as the input port and PFI3 as the external trigger ( given to the clock of the ADC). I am not able read the data properly ( missing the first few bits of data).

    Hi,
    I am using PCI6534 to read the digital data from out of ADC. I am using port 2 as the input port and PFI3 as the external trigger ( given to the clock of the ADC). I am not able read the data properly ( missing the first few bits of data).

  • Logic Not Reading Kontakt 3 correctly

    I think this is a leopard problem because all works well in... GUI is white like this http://img258.imageshack.us/img258/633/picture1ixy.png I know it's not a NI problem. It works fine on the studio tower but not on this imac... I installed Prokit 5.0. still nothing... even though it affects Kontakt it seems to be something in my 10.5.8 please help. thanks!

    Open the Midi event editor and check the recorded controller events. Probably the EV-5 is transmitting wrong data to the physical Input of Logic.

  • VLOOKUP not reading lookup value correctly

    Hi,
    I'm having a problem with my VLOOKUP. For my lookup value, I'm using a cell containing a RANDBETWEEN so that whenever I refresh with F9, I would get a new number in the RANDBETWEEN cell, which will then make VLOOKUP show the cell corresponding to the newly
    generated number.
    This isn't exactly what I did, but this is an example of the basic gist of what I was trying to do.
    On Worksheet A, I had Column A list numbers 1 through 12, while Column B had January through December.
    On Worksheet B, I had Cell A1 contain RANDBETWEEN(1,12) and Cell B1 contain VLOOKUP(A1,'Worksheet A'!$A$1:$B$12,2)
    So, when I pressed F9, I would be able to get RANDBETWEEN to generate a random number between 1 and 12, and the VLOOKUP would generate the corresponding name of the month.
    However, when I tried this, the random numbers continued to be generated, but the VLOOKUP did not keep up with the new numbers being generated. What did I do wrong? I tried using my file on Onedrive's version of Excel as well as OpenOffice Calc, and none
    of them are working.
    As noted in my username, I am still in the beginning stages of learning Excel. So, if I'm doing something stupid, please be easy on me...
    Thank you for your time.

    Could you create a stripped-down copy of the workbook (without sensitive information) and make it available through one of the websites that let you upload and share a file, such as Microsoft OneDrive (https://onedrive.live.com),
    FileDropper (http://filedropper.com) or DropBox (http://www.dropbox.com). Then post a link to the uploaded and shared file here.
    Or register at www.eileenslounge.com (it's free) and post a message in the Excel forum. You can attach files up to 250 KB to a post there (zipped if necessary).
    Regards, Hans Vogelaar (http://www.eileenslounge.com)

  • Does Mozilla's Plugin Checker not read Safari plugins correctly? My Plugins are all up to date and it still says "update."

    Shockwave Flash
    Shockwave Flash 10.3 r181 — from file “Flash Player.plugin”.
    Shockwave for Director
    Adobe Shockwave for Director Netscape plug-in, version 11.6.0 — from file “DirectorShockwave.plugin”.
    I'm wondering if it is how Safari does not list the entire version in it's plugin page, such as 11.6.0 instead of 11.6.0.r.626.
    Also I have Looked in the plugins file for Safari and turned on the extension to show invisible extensions and it shows this:
    DirectorShockwave.plugin 11.6.0r626
    Flash Player.plugin 10.3 r181.34
    I have also uninstalled and reinstalled just to see if that was the problem.

    When you run the plugin check, you should get a column with the full version number (here's Flash, for example, in the attached screen shot).
    As for finding Safari plugins, I don't know how it works on MacOS; on Windows, Firefox will scan certain locations outside of its folders to pick up plugins that are not Firefox-specific. The plugin checker then will use the information that Firefox has gathered.

  • Safari not reading CSS scripts correctly?

    I have in my .css file a command as thus:
    menu {
    font-family: "Monotype Corsiva";
    This under all circumstances works, Monotype Corsiva is in OS X, and Windows OS's... but for some reason Safari won't view the font... why?
    This has to be a Safari bug, for I can get some other cursive fonts working...if it isn't how do I get the fonts working in Safari?

    It also doesn't answer my question.
    I doubt you will find one here. You might go to
    http://webkit.org/
    and try the latest nightly build and see if it works better.

  • IPod Touch not reading TV Show correctly

    I have the first 4 seasons of The Office and the first 6 of Family Guy, but i did not purchase them off of iTunes. I got them in fiine, but when put on my iPod Touch 2G 8GB, it does not tell me the season when i hit video. It says the show name, and then in parentheses the amount of episodes. I was wondering if there's a way to make it shpw up to say which season it is b/c when i open it up, underneath the episode name, it then says season _, episode_.

    What is shown depends on what values are put in the Show, *Season Number* and *Episode Number* boxes in the "Get Info" dialog's Video tab. *Episode ID* may(?) affect sorting and is usually on the lines of "s01e02" to indicate Series 1, Episode 2. When you purchase a file some of these fields may not be filled in. Giving different seasons of a show different Show field entries would let iTunes treat the seasons as separate shows if that was what you actually wanted.
    tt2

  • IPhoto 6 not reading blank CD correctly

    I just upgraded to iPhoto 6.06. I decided to burn 430MB of photos to a CD. iPhoto keeps telling me that the blank disk I put in doesn't have enough room to burn the photos (but I can successfully burn them if I export them full size to the desktop and have Toast 8 do the job). Something seems wrong to me.

    Pamela:
    When you use the Share->Burn menu option you also are burning the thumbnail files, modified files, database files and other library files. That kind of disk is usable only by Macs running iPhoto like this
    So if you want to burn only the jpg files export them to a folder on the desktop and burn that folder to a CD with the Finder.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Maybe you are looking for