8320 with Data Plan but it doesn't seem to work

Hi,
I just bought a NEW Blackberry curve 8320 off ebay. My service provider is Fido and i called them today to activate a data plan. I can now see EDGE appear next to my connection bars therefore I assume that the data plan is enabled on my account. However i cannot use the browser unless connected to my home wifi network, I have a read a few posts and it says to go and select " INTERNET " instead of "HOTSPOT" in the browser settings but i don't have any other options besides HOTSPOT. I also downloaded the gmail app and since i believe it doesn't work thru the wifi connection it also says no network available so to me that is another sign that there is an issue with my EDGE connection. I tried the Host Routing Table send message thing ( i scrolled thru the multiple lines and clicked on the one in BOLD letters and clicked register now). a few seconds later i get a message that says my blackberry has been registered to the wireless network but nothing is fixed. I logged onto the fido.blackberry.ca site to activate the e-mail and when i enter the pin and the imei it says invalid format, i made sure i typed them in properly i looked under the battery and in the option -> status and the numbers all match so i don't know what else to do. Could there be an issue with Fido and unlocked phones? And i can't install Blackberry App world cause it says my phone does meet the requirements. Any help would be appreciated. thank you
P.S : I did call fido about the problem but since it isn't there phone thay can't help me. All i want is for the internet and e-mails to work
I just installed opera mini and turned off the wifi connection to my home network and that worked, so what gives witht he blackberry browser

Again, your story points out a major problem of purchasing a Blackberry off of Ebay (Amazon, Craigslist, etc., etc.,).
Ebay and Amazon act as a show room for private sellers (generally used rarely NIB) and at least in the case of Amazon as an authorized reseller.  Ebay, I believe has vendors who are authorized resellers through their Ebay store front.
Yes, you can get fantastic deals through either.  The downside is that you don't have a person to speak to, you don't have an individual that you can reach across the counter and grab by their shirt collar.
Buying off t he internet from other than a carrier's website is rife with problems that are not easy to resolve. 
A "properly" unlocked 8320 would not have had the issues you ran into.  A reputable individual wishing to privately sell a Blackberry through Ebay or Amazon would have taken the steps to unlock the device and insured that the Pin has been released prior to putting it up for sell.
They now have your money and you have...
At least here with the hungry carriers you don't need to go the third party sellers as if you want to sign on the dotted line for a two year contract the instrument costs are very very low.
I have my "old" Storm 9530 I unlocked in preparation for a tour of Europe.  It was replaced by a 9550 which I haven't unlocked yet.  Right now, it is my "back up" BB but should I decide to put it on the market honor would require that it be ready to go on any carrier.  That's just me however.
I would start firing off emails to the seller...you deserve a working device.
Good luck
Наглый пес! Вы должны быть благодарны мы даем Вам возможность проживать в нашем мире!
BB 9550 Verizon OS 5.0.0.1015 My Storm My Blackberry My Lifeline
If there is a Theme on my Blackberry, Hedone it!
If someone successfully helped you with an issue, say thank you by clicking "kudos" in their post and clicking the star.
Antiquis temporibus, nati tibi similes in rupibus ventosissimis exponebantur ad necem
If your issue has been solved, please mark the post that solved it for you!

Similar Messages

  • I'm unable to sync my ical with my ipad. I've tried to set it up through i-tunes but that doesn't seem to work.

    I'm unable to sync my ical with my ipad. I've tried to set it up through i-tunes but that doesn't seem to work.

    You have sync all iCal calendars chosen or selected calendars?
    No problems syncing contacts with the Address Book or with anything else included with the iTunes sync process?

  • Is there a way of using IE7 with Mountain Lion? There used to be this facility using Safari "Develop" with Lion, but this doesn't seem to work with ML

    Is there a way of using IE7 with Mountain Lion? There used to be this facility using Safari "Develop" with Lion, but this doesn't seem to work with ML

    Thank you for this, and to Caleb.
    I've tried using Caleb's approach (which is the same as I used with Lion), but the programme doesn't respond now that I have installed Mountain Lion.
    My problem is that I do not want to use IE7 but that a programme I need regular access to will only allow IE7 and I've been told by the developers that it is too expensive to upgrade this programme to allow it to be used by other browsers.
    So, my puzzle remains the same. I could access IE7 and use the programme using Caleb's solution with Lion. I can't do the same with Mountain Lion. I do (I think!) understand your point about the programme requiring IE7 specifically, but if it worked on Lion, why isn't it working on Mountain Lion? Or was I just lucky before?
    I'll try mende1's approach, though I doubt I'm technical enough to virtualise anything!
    Thanks again. Any further thoughts welcome.

  • I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer."  I have tried to update my settings, but this doesn't seem to work.  Any help would be much appreciated

    I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer."  I have tried to update my settings, but this doesn't seem to work.  Any help would be much appreciated

    Hard Drive:  The Hard Drive is on my camera (Sony Handycam)
    Just needed some info on what is going on with your particular system.
    Knowing the exact camera model will also assist us.
    If this camera is standard AVCHD you should be able to connect with USB to Mac with FCE open and use Log and Transfer without all the fiddling around converting etc.
    What FCE does during ingest is convert files to AIC. (Apple Intermediate Codec)
    FCE cannot read the individual files in the BDMV folder, that's why all the converting is required when you use that method.
    BTW: regards formatting drives/cards/memory on cameras; it is wise to use the actual device to format rather than a computer. This is a prime cause of read/write goof ups with solid state media. This applies to still or video cameras.
    Keeping the COMPLETE card/memory structure in tact is vital for successful transfers.
    Try here for some trouble shooting tips:
    https://discussions.apple.com/message/12682263#12682263
    Al

  • Hi, I have photoshop CC. It's the french version but I would like to have it in english. I went in the creative cloud to change the language but it doesn't seem to work. Do you know how i could do it ?

    Hi, I have photoshop CC. It's the french version but I would like to have it in english. I went in the creative cloud to change the language but it doesn't seem to work. Do you know how i could do it ?

    Please indicate whether or not the following link helps... I have not had to use it and so I do not know if/when it does help.
    Creative Cloud Help / Adjust the install language | Creative Cloud applications | CCM -
    http://helpx.adobe.com/creative-cloud/kb/change-installed-language.html

  • HT4527 I have my entire music library (purchased and burnt CD's) on my iPod Touch from one computer and I wanted to sync it all to my new computer. I was hoping it would all transfer via sync when I plugged it in but it doesn't seem to work. Please help?!

    I have my entire music library (purchased and burnt CD's) on my iPod Touch from one computer and I wanted to sync it all to my new computer. I was hoping it would all transfer via sync when I plugged it in but it doesn't seem to work. Please help?!

    Ok, I had a glitch, forced to restart, and lost my train of thought.
    Reinstalling iTunes should fix the major issue that might have gone wrong, perhaps your explaination points will disappear and everything will be peachy again.
    But if they don't, you can open the XML file in iTunes Folder using a Text edit program to see what the common pathname is to the iTunes Music folder or where your content is located.
    If you moved the itunes folder, it needs to go back.
    I can't  download iTunes to my Vista virtual machine to test it out right now because iTunes is down, so I can't verify the pathname, perhaps your issue and the iTunes being down are related somehow?
    You don't want to import all your music again, but it's a option, but you lose all your playlists, that's what I'm trying to recover.
    If oyu don't have a whole lot of playlists, then simply select all the explaimation point music and delete, select File from the menu and import your itunes folder again.

  • I want to create a duplicate table (button click by user) but instanceManager doesn't seem to work

    I have a table that needs to be duplicated, in whole, not just adding a row, on the next page of a form.
    Scenario: The user enters data (employment history) on the first table but requires an additional page with table to complete all work history.
    1. I've created a simple table (Table1) wrapped in Subform_EmployHistory which is inside SubformMain_Page2. Theses are the object properties; which I haven't done anything to, yet.
    Subform_EmployHistory is Flowed
    Allow Page Breaks is unchecked
    (click on image to see larger version)
    2. I've added a "Subform Instance Controls: Add" button object outside the table and its subform
    3. Have tried to script the button to allow user to create a new page duplicating the table (not duplicating the data they entered on the first page) table but nothing seems to work.
    4. What you see in the next screen clip has not had any script changed or added. Just what shows up when the instance control button is first placed on the page.
    What should my script look like? Or, am I using the wrong approach altogether.
    Penni

    I would try checking your hardware setup to ensure that your playback device is selected and setup properly
    From the main menu select Edit > Preferences > Audio Hardware

  • Whenever I drag photos from safari to my desktop, it keeps on auto-arranging them. I've tried checking the arrange to none view option but it doesn't seem to work. HELP, PLEASE?

    I just want them to stay exactly where I dragged them on my desktop. Can anyone help me on this. It's starting to get really frustrating.

    Can't find the "sort by" option. I've tried the view options and clicked "none" in arranged by section as I've seen in forums, but still doesn't work.

  • I want to play games like FarmVille and other Zynga games on my ipad but it doesn't seem to work! Can I do this or do I need to buy a tablet?

    I want to play games like FarmVille and other Zynga games on my IPad, but it doesn't work, maybe I should have gotten a tablet.

    You did, an iPad is a tablet.
    Anyway, no Flash based games like those cannot be played because iPad does not support Flash.  In fact, pretty much no tablets short of the ones running Windows 8 Pro will run Flash based games as Adobe has ceased development of the  Mobile version of flash.
    It would be better for Farmville and the like to move over to HTML 5 based games that cna be run on most tablets and smartphones

  • How do I prune asl.db with "syslog -p"?  It doesn't seem to work.

    Has anyone has any luck pruning asl.db using the the syslog utility with the “-p” command under Leopard?
    I’ve shut down syslogd, and I can search the active database using “-k” and an expression:
    $ sudo syslog -db -k Sender sshd
    Fri Sep 19 11:02:59 unknown sshd[1405] <Notice>: USER_PROCESS: 1410 ttys001
    Fri Sep 19 17:25:28 unknown sshd[1405] <Notice>: DEAD_PROCESS: 1410 ttys001
    Tue Sep 30 10:57:31 unknown sshd[9397] <Notice>: USER_PROCESS: 9402 ttys001
    Wed Oct 1 17:36:46 unknown sshd[9397] <Notice>: DEAD_PROCESS: 9402 ttys001
    According to the syslog man page, I should be able to able to prune the active database with the following:
    $ sudo syslog -db -p Sender sshd
    But, what I get instead is:
    prune operation failed: can't contact syslogd server
    The man page for syslog says, “If -db is given without a database file name, syslog prunes the active database file. This may only be done if the syslogd server is not running.” So, I shouldn’t need to have syslogd running.
    But, just to make sure, I started syslog again, and I get a different error message:
    $ sudo syslog -db -p Sender sshd
    no queries for pruning
    Same thing if I remove the “-db” option.
    $ sudo syslog -p Sender sshd
    no queries for pruning
    There are definitely queries because they show up with the “-k” option.
    If anyone has an experience with this they can share, I would appreciate it. I could just be missing something.
    Thank you.

    Hi, ''I can't recommend that you do it'', but If you really are determined, [http://www.tweakguides.com/Firefox_12.html this article] may help.

  • Trying to repair Time Machine, but it doesn't seem to work...

    I have been having some problems with Time Machine (and it might be my own fault.) I was trying to retrieve some old documents that were lost in the iCloud and now Time Machine won't backup. I tried to repair the drive using disk utility, but it would stop about halfway through the process and recommended to start over with a new backup and erase the old one. However, while doing research online, i found this article http://blog.jthon.com/?p=31 but i can't get it to work...does anyone have any suggestions?

    See Pondinis excellent Information Here...
    http://pondini.org/TM/Troubleshooting.htm

  • After accepting update to my time capsule, I can no longer complete a backup because there is not enough space.  I tried deleting old files, but it doesn't seem to work.  Any advice:

    My time capsule was updated through an apple download update on June 16, and now I cannot back up my computer.  The message is that there is not enough space.  I tried deleting my files, but it didn't help.  any suggestions?

    How much space is there according to airport utility?
    TM can be fussy.. Do a factory reset of the TC and give it a new name. Use short, no space and pure alphanumeric type names..
    And reset TM. See A4 here. http://pondini.org/TM/Troubleshooting.html
    Then set up TM again to the TC and see if TM will start .. the reset will not hurt the backup and TM can still find it on a renamed TC.

  • I have a MacBook Air which has a camera installed in it but it doesn't seem to work for some things like iMovie and my security camera for emergencies. It does however seem to work for Photobooth and facetime. Please write back and help my mac's problems.

    It'd be nice if you could help me with my mac's problems so I can start using iMovie and my security camera again. Thank you too all that answer.
    --JaySwanny

    User Password Reset

  • My ipod is stuck on the screen which says 'connect to itunes' and i am unsure how to get it off i've tried backing the system on to itunes but it doesn't seem to work if anyone knows how please submit an answer.

    my ipod is stuck on the 'connect to itunes' screen how do you get it on to the home menu?

    Connect the iPod to its syncing computer and restore via iTunes on the computer. If iTunes does not see the iPOd try:
    - Placing the iPod in recovery mode.
    iPhone and iPod touch: Unable to update or restore
    - iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    or
    - iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • Soft and hard reset for time machine doesn't seem to work does anyone have suggestions?

    I have tried to use a soft reset according to the language on the apple site by using a pin to push the button for a second even up to a minute but it doesn't seem to work.   Does anyone have any suggestions for either a hard or soft reset?  I did get a new  router Netgear wireless extreme thus I'm only using the time capsule portion instead of the wireless router. 

    Tell us what happens when you press in the reset.. you should feel the switch click.. but don't press too hard or you will break the plastic lever arm.
    Connect the TC directly to the Mac by ethernet and open airport utility.
    Can it find the TC.. if so you can do a factory reset from the utility instead. If it cannot find it.. try again with the reset.. you need to hold in reset for about 10-15 sec. The front led will begin to flash rapidly. Release it at that point.

Maybe you are looking for

  • How to display the page no in script

    HI, Can any one tell how to display the page no's as follows in Scripts. current page/total no.of pages(ex:1/10)

  • How do I send 'emoticons' in my outgoing emails?

    How do I include 'emoticons' in my outgoing emails?

  • Correlation Setup

    In the Integration Process the properties step does not display the Correlation mandatory value. Where we have to set up the correlation value in IR so that it will display in the Integration Process properties step.

  • After Mavericks update where is my "replied" arrow & more missing

    I have upgraded to Mavericks. I should not have yet - too many bugs. Now, my devices are not syncing (also upgraded to iOS 7 on iPad and iPhone) -- My gmail is not syncing now so when I read an email on my phone, it does not show that i have read it

  • Batch script for automating process

    Hi all, not sure if this is the right area asking about batch scripts, but this has to do with the back-end system in Hyperion. I was wondering if there is a way to run a batch script on the transaction log that will give a list of any new GL account