8330 Curve Was constantly rebooting, now stuck on homescreen and dead.

Hi All,
So, for the last several months I have been just dealing with my 8330 rebooting. Fine, I can deal with that because I'm usually at work or school and not using the phone. However, starting yesterday, my phone rebooted and got stuck on the screen that informed me that I had a media card inserted, yadda yadda yadda... So I manually reboted the phone and took out the media card. And then it just got stuck on the home screen. I am able to scroll the ball and it moves on the screen, but I cannot press any buttons--not the letters, call, end, or menu button. I cannot even turn it off without rebooting it!
So, has anybody else encountered this probem? I'm ready to throw this phone at the wall!

same here mine is also a curve 8520,,someone said its because the operating system is outdated, is it writing reload software 552..

Similar Messages

  • I was fooling around with the "reader" feature on my New iPad. I am now stuck with that and can't get out. Even my four digit code is read out in a machine voice and the iPad wont boot. How do I get out of this. Tried the red arrow slider. shut of the iPa

    I was fooling around with the "reader" feature on my New iPad. I am now stuck with that and can't get out. Even my four digit code is read out in a machine voice and the iPad wont boot. How do I get out of this. Tried the red arrow slider. shut of the iPa

    James,
    I cannot get into Settings! It keeps reading out Slide to Unlock when I try to slide teh arrow to open the fpur digit entry boxes.

  • I updated imovie, which is now totally different.  I tried to import videos from iphotos, but the system is now stuck on "import" and it doesn't include iphotos.  Clicking on "close" doesn't work.  How do I get out of "import"?

    I updated imovie, which is now totally different.  I tried to import videos from iphotos, but the system is now stuck on "import" and it doesn't include iphotos.  Clicking on "close" doesn't work.  How do I get out of "import" and then how do I access iphoto?

    I have asked a moderator to provide assistance, they will post an invite on this thread.
    Once you get a reply, if you click on their name, you will see a screen like this. Click on the link as shown below.
    Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • TS2446 A email account that was used is now not in use and songs that were purchased and added are bound to this old account from the same computer how do I the purchaser of these songs reclaim the authorization to play and use in my new account

    A email account that was used is now not in use and songs that were purchased and added are bound to this old account from the same computer how do I the purchaser of these songs reclaim the authorization to play and use in my new account. even though account name may have been changed.

    Just authorize the computer and retreive them.
    Go here -> https://iforgot.apple.com/cgi-bin/WebObjects/DSiForgot.woa/wa/iforgot .
    FYI: you should have simply updated the AppleID with new info and continued to use it instead of creating a new one.

  • HT4623 when trying to do an update for settings I had to change my password. I am now stuck on 'Terms and conditions' it will not let me 'agree' and has locked my Tablet. Pleas help

    When trying to do an update for Settings on my iPad I had to change my password.  Having done that I am now stuck at 'Terms and Conditions  My iPad is locked down it will not let me 'agree' and I can't get out of the procedure.
    Please help/
    Kath

    Reset iPad and continue with update
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Apple tv was working fine until power outage.  Now stuck on Computers and Settings Icons.  Cannot get back to normal function.

    Apple TV was installed and functional until power outage.  Now I am stuck on Computers and Settings Icons and cannot get back to normal operation.  Can get to settings which  I have tried many times.  Any thoughts?

    Happened once to me also following a nasty storm
    One of the 2 things worked for me (can't recall which):
    1. Power down everything. UNPLUG  your apple TV and whatever it's connected to, including the power cord and the HDMI cable (disconnect at both ends) Wait a minute or two.
    Reconnect everything: Restart.
    2. Totally Reset the Apple TV (this is more work since you'll need to add all your settings)
    Whatever worked: My Apple TV resurrected itself (unfortunately can't say the same for my DVD player).
    3. Lastly, the timing of the storm could be a cooincidence - this happened to someone else here (no storm invoived) and it turned out to be a temporary outage at Apple. see this: https://discussions.apple.com/message/18027331#18027331
    For the future, if you've grown paranoid...
    I always unplug my computer for heavy storms (on the advice of a techie at power protection company), But  These days, if a storm is really severe (or very extended) I also unplug my AV equipment. the The ATV is chump change compared to the cost of my other components - but I've grown really dependant on it.
    Remember: Surge suppressors will take the first hit, but often that's it, their circuitry can then get blown. Also if you do unplug power,  Unplug power for everything (very easy by connecting everything to a Surge suppressor) just don't forget RF Cables or ethernet cables (If you leave your router connected).
    Personally, I leave my router on, and am willing to rebuy if neccessary, in order to at least access my laptops, and iPad. BUT this means I have to unplug the ethernet cables.
    Good luck, doubt your ATV is toasted if anything comes up.

  • Power went out when iTunes update to 10.5.1 was installing.  Now it's incomplete and I can't download tunes. What ca I do?

    Power went out when iTunes update to my computer was installing. Now it says: "A required iTunes component is not installed.  Please repair or reinstall iTunes (-42404)".  I hit "check for Updates and it shows I have what's current.  How can I fix this without losing all my songs?

    In case you're running Windows, did you check your security software settings? iTunes for Windows: Troubleshooting security software issues
    iTunes has to contact Apple during the process of downloading and updating iOS software.

  • Turned on my ipod. Said update available. Updated fine,now stuck on terms and conditions. Will not allow me to accept, and now I cannot turn my ipod off. It is literally froze. Any suggestions.

    Turned on my ipod. Update available.  Updated fine, came to accepting terms and conditions and this is where it all went wrong. Stuck, cannot accept and cannot turn off the the ipod.  It is stuck on the terms and conditions. Uninstalled itunes on my computer and reinstalled accepting the terms and condition in my computer. Pluged in my ipod, but still nothing.  Just stuck on the terms and conditions.  Any suggestions would be greatly appreciated.

    Let the battery fully drain till the iPod turns off.
    Then place it in Recovery Mode for a full restore. (Setup as new when done)
    How to enter Recovery Mode:
    http://support.apple.com/kb/HT1808

  • Sound was fine but now distorted (sounds overdriven and clipped) on g7-1075dx

    Sound suddenly is distorted; sounds like a preamp overdriving a power amp. Pavilion g7-1075dx with ATI High Def audio, IDT High Def CODEC, Windows 7 Home. Same at any level on available volume controls.

    the same thing is hapening to be only had my laptop for a month. I plugged in speakers and it was fine, when i took the speakers out the sound is now distored and static from time to time, also one speaker is louder then the other, dont know if thats suppose to be like that.

  • After update now stuck with itunes and plug on screen WHY

    after i did the kids udates n the ipod touch 4th the one now has the itunes logo and the plug showing on screen anyone know how to fix

    Glitches happens sometimes. You need to connect the iPot to your computer and restore via iTunes.
    iTunes: Backing up, updating, and restoring iOS software

  • Deleted Large Message now stuck in drafts and stopping mail app work at all

    I started to create a message containing a lot of photos from iPhoto - realising it was too big (23mb) I deleted it but it started trying to send the message (there was no address) - it then saved it in a new folder Drafts (.mac) since then I haven't been able to receive email at all. I have deleted the 'draft' a number of times and it keeps coming back. When I send a mail it hangs and doesn't send until I force quit and then it sends it but doesn't keep a record in sent items.
    When I leave it logged in for a while I get a message saying:
    Some actions taken while the account “.Mac” was offline could not be completed online.
    I've reconfigured my online offline settings to only save drafts locally but it hasn't helped and instead has deleted all of my offline folders!
    HELP!!

    Hi k:
    That file is in your home folder ~(symbol for home)>library>preferences.
    A preference file may (rare, but it happens) become corrupted. OS X rebuilds them as needed. You will need to enter any personal preferences that differ from the default settings.
    By the by, welcome to the wonderful world of Apple computing. You will find these forums represent the best on-line community anywhere.
    Barry

  • HT4623 Updated my iPhone to ios7.  Now stuck in terms and conditions do loop

    My phone appears to be stuck in some sort of do-loop in the terms and conditions.  I press "agree" and a popup with the same "agree" button appears.  How do I get out of it?

    Reset iPad and continue with update
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Galaxy s5 constantly rebooting

    My phone started to constantly reboot today, it goes on and then off constantly. Can't access anything or use it. I didn't install anything b/f it happened.  I've tried taking the battery out, multiple times, but that's not working.
    HELP?
    Is something wrong with the power button?

        Jdeep, hearting that you are having this issue wit your S5 is concerning. We will work with you to get this issue resolved. Are you able to use the phone to a certain point before it starts rebooting? When was the last time you updated the software on your phone?
    CandiceH_VZW
    Follow us on Twitter at @VZWSupport

  • TS3274 iPad was dropped and now everything is fuzzy and green

    IPad was dropped. Now everything is green and fuzzy. Any idea what is wrong?

    If you bought Apple Care + with your iPad take the iPad to an Apple Sptre, pay the minimum charge and get a replacement. If you didn't buy Apple Care + then you'll have to payc a higher fee for a replacement.
    But your pad is indeed broken. It doesn't handle being dropped very well.
    You might try giving the iPad a good hard slap on the back with your hand to see it the problem can be corrected. Yes, I'm serious.

  • Hi morning anyway I found difficult too download I dont why before its was fine but now it's take longtime can you help me please txs

    Hi morning mark can you help me please I can't download the game before was fine but now I can't and take long time please can you help me please txs

    The figures you mention only make sense on your intranet.  Are you still using the same wireless router.  The verizon one is somewhat limited as far as max wireless-n performace.  For one thing it only has a 2.4 radio.   I like many people who wanted wireless-n performance before they even added a wireless-n gigabit router, have my own handling my wireless-n network.

Maybe you are looking for

  • Using the env variable of unix in a procedure call

    hi, how can i use the environment varible of unix in a oracle procedure call ? I am working woth shell scripts and it hold some value into a variable and that varible value I want to pass into a oracle procedure. i'm sending the sample code and pleas

  • Store last user on "Login Window: Name and Password"

    I have set my login window to display as "Name and password" Is there any way to make a certain user always appear in the Username box - much like you can do on Windows? Basically, I want to only have to enter in a password and not the username every

  • Does external HD have to be on all the time?

    So I have an external drive I'm using for Time Machine. It tends to run hot if I leave it on all the time (passive cooling enclosure- no fan). Plus it's extra noise around my otherwise nearly silent mac. So I've been turning it off and on, and usuall

  • Run form from form builder

    Hi, I am using Form 6i and copied Forms60Libraries in my local machine. I am developing form which will be registered with oracle apps. Now I want to run this form locally instead of uploading into server everytime while testing which I don't have ac

  • Create Communication Component BS interfaces not loading

    Hello, I have created a communication component and assigned a business system in my new PI 7.1 system and unlike the other components I've create this Business System does not load with all the inbound and outbound interfaces.  When I open the Busin