8330 freezes up almost every other day.

I have had the same problem with two different 8330's freezing up. It seems to happen ever few days and usually when I have several task reminders pop up. I can reset it with a battery pull no problem, but this is a pain to do every other day. I have v4.5.0.77 installed. Any suggestions?

Hi there!
In our Sticky thread of current OS versions:
http://supportforums.blackberry.com/rim/board/mess​age?board.id=8300&thread.id=6807&page=14
I don't see that version for any carrier...have you checked for updates from your carrier for the core device OS? That usually has lots of fixes and such.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • HT201263 hi i have an iphone 4 im fed up with it it keeps freezing and blue screen i have restarted it every other day for 2 wks now even had it in a phone shop now the screen is blue with a white line down the middle and will not let me switch off after

    my iphone 4 has been acting up for 2 wks now every other day it keeps freezing sometimes i can wake it by pressing the 2 buttons tog ive restored it restarted it had it in a shop were they got it back on, saying it was the soft ware, but the same day i got it back it froze again, now the screen is blue once again and it wont let me switch it off n sort it with pressing both buttons and the computer isnt finding it, im fed up i will never have another iphone any ideas anyone please

    Hi @imobl,
    You sound like an Apple support guy who hasn't been able to answer my questions.
    To respond to some of the points you made,
    - I did not ignore Ocean20's suggestion. If you has read my post, you would have known that I took my phone to the apple service centre where they tried this restore on THEIR machines. I am assuming that Apple guys know how not to block iTunes. So I actually do not understand your point about me trying the hosts file changes on my machine. Do you not believe that apple tested this issue with the correct settings?
    - you also give a flawed logic of why the issue is a hardware issue. You mentioned that If I thought that the issue was with the software, i should try a restore and getting it to work. The problem is that my error (23), and many others comes up when the restore fails. And you would be astonished to know that not all errors are hardware errors. Sometimes even software errors prevent restores. Funnily enough Apple itself mention that 'in rare cases, error 23 could be hardware related'.
    - all Apple has done so far is replicate the issue. I don not know how anyone can conclude that the issue is a hardware issue.
    And by the way, I am not certain that this is a software bug. Again if you read my Posts, you will notice I only want a confirmation,/proof that the issue is hardware related as they mention..
    Please refrain do. Responding if there is nothing to add.

  • Finder is freezing after installing Yosemite. Having to relaunch every other day.

    After installing Yosemite, I went to finder and noticed that the text was blacked out and it was frozen ( not allowing me to go anywhere in the finder). After relaunching the finder it started working fine. But since then I am having to relaunch the finder every day or every other day. Is there a fix for this or no? Just wondering as its beginning to be an issue. Haven't had this issue before and I'm on a mid 2013 Macbook Pro Retina.

    Hi
    I have a Late 2013 retina MacBook Pro, and i've the same issue than you... I don't really know from where it comes from...
    Do you have a third party software to browse external device in NTFS format such an external hard drive?
    I have a path to explore since i noticed this bug the first time i tried to browse my external hdd.
    Here is a screenshot of the bug :
    Or when i browse local ssd (where Yosemite is installed) i got a blank folder...
    I got graphic glitches when entering Time Machine for exemple.
    I'm using the last version of Tuxera NTFS (trial version) supporting Yosemite...
    I've no problem so far with Mavericks which is working flawlessly...
    My install of Yosemite is a clean install without any third party software/drivers, the problem is here with or without Tuxera NTFS installed. I did two clean install in the passt two days.
    Many thanks if Apple could do something for this bug.
    I did an Apple Diagnostic and there is no mistake with the hardware according to the result.

  • Computer on and off every other day

    is it bad? i really don't know. i've been doing this logic 7 hour sessions every other day by myself for 2 years... almost flawlessley. A true gift to have this time!!!It's unbelievable how much you guys have helped me here. I've been rec./ digitally for 10 years now...am I screwing up by powering down (everything)Monitors, Preamps, external drives..mixers. I always do this.

    At the rate of which Electrical component are made today, there shouldn't be arm in leaving stuff on,
    where as its made from a reputable manufacture, and as a signature or seal of approval.
    Power-ing down stuff will result in less consumption of Electricity, and will maintain a better system in-terms of abuse when left unattended.
    E.g. if there is a power failure back and forth, which may blow your system, if its not plug into a power-serge, that will protect it from these element of surprise.
    Another e.g. if your using a projector, and its left on, when not in use, then the life-span of the bulb, will be shorten because the life on these bulbs is for a certain amount of hours.
    So in this case leaving it off will result in a better life-span,
    also plasma screen is like that as well, other than that, it should be fine.
    If you're not bordered about paying the excess on electric rates,
    even though have it on and off, then on again could result in you paying more, than if it was to be left on in the first place.
    Stuff such as monitor is always left on even if the computer is off, in most set-up.
    Power amps/Mic/pre nice to leave of when not in use they eat that energy, believe.
    Fr.BlayZay.

  • Why does my itunes crash after start up with an "APPCRASH" error every time i open it?! I have been trying to fix this for weeks but all i can do it re-install it every other day which does nothing!

    Why does my itunes crash after start up with an "APPCRASH" error every time i open it?! I have been trying to fix this for weeks but all i can do it re-install it every other day which does nothing! I am desperate to get access to my itunes to get music on my phone and all of this just makes me want me to sell my iphone since there is no other way to add music to my phone. If things go get sorted soon you can say goodbye to my support.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • I like and use Top Sites but it has become unsuable with this constant blacking out and reloading the thumbnails.  My MBP has not seen a problem at all.   I have been searching every other day for over a month trying to find a fix in Windows Safari with n

    I like and use Top Sites but it has become unsuable with this constant blacking out and reloading the thumbnails.  My MBP has not seen a problem at all.
    I have been searching every other day for over a month trying to find a fix in Windows Safari with no joy.  I want to resolve, not switch browsers. Please offer up a solution that only refreshes the Top Site thumbnails once a day or as some controlable interval.  Started about two versions ago, now on ver 5.1.5. Windows 7 64bit.
    Safari 5.1.5 for Win64 bit, Windows 7!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    I think I solved the wifi connection problem, just by switching off completely the router! sounds trivial, but in this case it worked!!!
    the funny behaviour of the trackpad/cursor still persists. any suggestion???
    thanks again

  • Every other day, my mac won't start up

    every other day, my mac won't start up. my keyboard would light up and i hear the system start but nothing is appearing in the screen. i would have to press the start button until the screen actually shows up.. why does it do that?

    Have you just tried repairing with Disk Utility?
    Repair the Hard Drive and Permissions - Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.

  • Unless I repair my hard drive every other day I am unable to delete songs from iTunes or email messages from Postbox. I've only had an iMac for a few weeks, is this normal?

    Unless I repair my hard drive every other day I am unable to delete songs from iTunes or email messages from Postbox. I've only had an iMac for a few weeks, is this normal?

    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Triple-click anywhere in the following line on this page to select it:
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if it frightens you, or if it doesn't solve the problem.
    Start up in Recovery mode. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password dialog will open. You’re not going to reset a password.
    In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
    Select your username from the menu labeled Select the user account if it's not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • Why do have to download adobe flash player every other day, when playing facebook games?

    I play facebook games and some need adobe flash player. I have to download it everyother day why?

    windows 7 is the system
    Internet explorer
    In a message dated 7/14/2013 12:41:31 P.M. Mountain Daylight Time, 
    [email protected] writes:
    Re:  Why do have to download adobe flash player every other day, when
    playing  facebook games?
    created by C F McBlob (http://forums.adobe.com/people/CFMcBlob)  in 
    Installing Flash Player - View the full  discussion
    (http://forums.adobe.com/message/5498048#5498048)

  • Ever since I received my Macbook Pro in July 2011 I've had issues with my wireless connection at home.  After software updates, Apple support suggested I reboot my router which works.  But now I have to do it every other day.  ????

    Ever since I received my Macbook Pro in July 2011 I've had issues with my wireless connection at home.  After software updates, Apple support suggested I reboot my router which works.  But now I have to do it every other day.  ????  AT&T my DSL carrier suggests I get a new router.  Apparently the one I have is really old and doesn't support my Macbook Pro.  Does this sound right?

    If your using WEP encryption yes, Apple has discontinued that becaues it's worthless. WEP (and WPA) is cracked so encryption makes no sense.
    Get a new Wireless N router, set it up with WPA2 (AES) Personal and two different 20+ randon letter/numbersymbol character passwords
    One for Admin access only of the router, keep this on paper off all comptuers in a safe someplace.
    One for entering into devices, computers etc for Internet Access Only.
    You need the long and random password to defeat brute force attacks by GPU software that the hackers have now.
    Also if you give out the password to another, they can't hack the network with the guest access password.
    Computers remember the internet password, so anyone with access to your machines or network will have the password.
    Since you have another Admin only password, they can't hack in. got it?
    You don't need "Invisible" or "MAC Address filtering" that's a waste of time as hackers can sniff a network and causes issues getting on the network.
    Good luck.

  • What is meant by Every Other Day- in oracle Alerts?.

    Hi All,
    we have many type of frequency in periodic alerts in oracle alert.
    ex. like on demand, On Day of the Month, On Day of the Week, etc..
    what is diff b/w: Every N Calendar Days, Every Day and Every Other Day these three.
    Some one can briefly explain me.
    thanks in advance.
    Loganathan

    Pls refer below link:
    http://docs.oracle.com/cd/A60725_05/html/comnls/us/alr/peralr.htm
    Every N Calendar Days--If you choose this frequency, enter a value in the Days field. Oracle Alert considers every day a calendar day, and does not skip holidays.
    Every Day--Choosing this frequency is the same as choosing Every N Calendar Days and entering a value of 1 in the Days field.
    Every Other Day--Choosing this frequency is the same as choosing Every N Calendar Days and entering a value of 2 in the Days field.
    thanks

  • WRT150N - Signal drops every other day

    Have a WRT150N in our home and every other day the signal cannot be found.  I have to unplug it for about 5-10 seconds and the plug it back in.  After that, the signal shows back up.  I am running Firmware version 1.01.9.
    Any thoughts on what needs to be changed to stop this issue?
    Thanks,
    Donnie

    I suggest calling linksys.  I've had similar problems with intermittent and limited connectivity for a few weeks since i purchased the router.
    They had me on with a level 2 resource.  I can't remember everything we changed in the router settings.  We changed a few of the settings that were "mixed" to a standard option.  I'm also on channel 11 now.  we also changed in the wireless settings the beacon interval?? to 50 and 2 other items i abbreviated  -- FT to 2306  ( i think it was 2346) and RTS to 2307 (i think it was 2347). 
    Sorry I did not capture all of the changes on paper, but it's probably best if you call them.   I tried calling on a sunday at first and was on hold for 45 minutes.  At about 11pm EST on Monday, i got through in less than 5 minutes. 
    All in all the 30 minute phone call was well worth the investment as i tried for a few hours resolving this on my own.
    Good luck.

  • Wpdomain.db file gets corrupted every other day

    Hello
    Our secondary wpdomain.db database gets corrupted every other day. Right now we have up to five people connecting to it at one time using multiple instances of ConsoleOne. How many users can we have connect to it at one time?
    Chris T.

    Hi,
    I guess I need to know what OS you are hosting the databases on. OES? Plain SLES? Sort of depends on what is serving up what and who is consuming it. But generally, you MUST disable opportunistic locking / client side caching on the CIFS connections used to access the domain databases. That is, no doubt, what is killing them.
    Two approaches:
    1. Fix the problem on the CIFS / SAMBA server side. Then client settings don't matter. Our domains are on pure SLES, not OES, and domains are shared via SAMBA. Clients incluse other SLES boxes, Windows clients, etc. So we nipped it in the bud by preventing it on the SAMBA server. If the server is using plain old SAMBA, the corresponding share section in /etc/samba/smb.conf should be set up similar to
    Code:
    [grpwise]
    comment = Transfer
    inherit acls = Yes
    path = /grpwise
    read only = No
    oplocks = False
    level2oplocks = False
    You can configure some of these setting globally, but I like to specify them explicitly - then you know what is actually going to happen. And you don't mess with other shares exposed by the server where client side caching / op locks "might" be OK.
    2. You can also solve the problem on the CIFS client side ( in your case, the remote servers mounting the CIFS share ) by disabling oplocks:
    cat /proc/fs/cifs/OplockEnabled
    It will report "1" meaning its IS enabled. That's bad! You can disable Op Locks easily:
    echo 0 > /proc/fs/cifs/OplockEnabled
    Generally, under high load, the CIFS client will fall apart with this enabled. The number of pending locks piles up and all the client does is service the locks. We have web server fronting a common CIFS share, you NEED to do the above to the systems mounting CIFS shares.
    Doing either or both ( on all systems hosting / consuming the shares ). I don't trust people to set up their clients correctly, so I opted for #1. The next day the problems stopped, order was restored to the Universe.
    ( This is analogous to, on Windows clients talking to Netware, File Commit = ON, File Caching = OFF, Level 2 OpLocks = OFF, etc. )
    -- Bob

  • About every other day Firefox crashes, this is getting old boys, I have downloaded all the new updates. whats going on????

    About every other day Firefox crashes, this is getting old boys, I have downloaded all the new updates. whats going on???? I was right in the middle of paying bills, this sucks bad!

    https://support.mozilla.com/en-US/kb/Firefox+crashes#Getting_the_most_accurate_help_with_your_Firefox_crash
    Type '''about:crashes''' in the URL bar and hit Enter.
    Click the hyperlinks to bring up the Crash Report pages and copy'n'paste the URL of each of those reports into the message box here. We'll see if we can help you figure out what is causing those crashes to happen.

  • Why is there a Flash update every other day?

    I'm getting a little paranoid that some of these updates aren't actually from Adobe. How on earth can Flash need to be updated so often? I thought Adobe was giving up on it (I wish).

    Every other day...?  The last few Flash Player updates:
    11.4.402.287 on Oct. 8
    11.4.402.278 on Sept 18
    11.4.402.265 on Aug 21
    What updates did you get?

Maybe you are looking for