8330 SYNC/CONFIGURE Problems

This is my first to the forums. Any help/direction would be greatly appreciated. I am using Blackberry Desktop Software version 4.3.0.17.
I have a 8330 Curve. When Synchronizing only my Address Book sync's and updates. Calandar, Memo Pad and Tasks DO NOT Synch.
In Desktop Manager when I click on SYNCHRONIZE and click on the "Configuration" tab then "Configure Synch." Under each of the tabs for Calandar, Memo Pad and Tasks I do not have an option for "Outlook", just options for Yahoo and ASC II. How can I get Outlook to be one of my options? The Address Book tab DOES have the Outlook option and as I mentioned . . . my Adress Book Synch.s correctly.
I have read exensively and have not reached a relove as of yet. Any help would be appreciated. Kudo forthcoming for any resolve/direction.
JGreen

There could be the issue... DM 4.3 does not support Outlook 2000.
The following applications are supported by BlackBerry® Desktop Manager 4.3 for synchronization:
IBM® Lotus Notes® 6, 6.5, 7
Microsoft® Outlook® 2002, 2003, 2007
Microsoft® Outlook Express 6
Microsoft® Windows Contacts
Novell® GroupWise® 6.5, 7
Yahoo!® Mail
The following applications are not supported by BlackBerry Desktop Manager 4.3 for synchronization:
IBM Lotus Notes 5, 5.5
IBM® Lotus Organizer® (all versions)
Microsoft Outlook 2000
Novell GroupWise 6.0
Microsoft Outlook Express 5
Microsoft® Windows Calendar™
Sage ACT!® (all versions)
Solution
Downgrade your Desktop Manager to Version 4.2, Service Pack 2
or
Keep DM 4.3, and upgrade your Outlook to version 2002, 2003 or 2007.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Problem OIM OID Ldap Sync Configuration in 11g.

Hi Team,
I am doing OIM and OID LDAP Sync configuration There It is failed in "Configuration Process" Step.
and also in weblogic OIM Maganaged server in ADMIN mode not in running mode.
please find the both logs.
*********************************Weblogic Logs**********************************************
Enter username to boot WebLogic server:weblogic
Enter password to boot WebLogic server:
<28-Sep-2012 14:07:44 o'clock BST> <Info> <Management> <BEA-141107> <Version: We
bLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<28-Sep-2012 14:07:47 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Serve
r state changed to STARTING>
<28-Sep-2012 14:07:47 o'clock BST> <Info> <WorkManager> <BEA-002900> <Initializi
ng self-tuning thread pool>
<28-Sep-2012 14:07:48 o'clock BST> <Notice> <Log Management> <BEA-170019> <The s
erver log file E:\Oracle\Middleware\user_projects\domains\IAM_domain\servers\oim
server1\logs\oimserver1.log is opened. All server side log events will be writ
ten to this file.>
28-Sep-2012 14:07:56 oracle.security.am.common.nap.util.NAPLogger log
SEVERE: Failed to communicate with any of configured Access Server, ensure that
it is up and running.
<28-Sep-2012 14:07:57 o'clock BST> <Notice> <Security> <BEA-090082> <Security in
itializing using security realm myrealm.>
<28-Sep-2012 14:08:04 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Serve
r state changed to STANDBY>
<28-Sep-2012 14:08:04 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Serve
r state changed to STARTING>
<28-Sep-2012 14:08:20 o'clock BST> <Warning> <oracle.jps.upgrade> <JPS-06003> <C
annot migrate credential folder/key ADF/anonymous#oimBpelCredKey.Reason oracle.s
ecurity.jps.service.credstore.CredentialAlreadyExistsException: JPS-01007: The c
redential with map ADF and key anonymous#oimBpelCredKey already exists..>
<28-Sep-2012 14:08:21 o'clock BST> <Warning> <oracle.adf.share.ADFContext> <BEA-
000000> <Automatically initializing a DefaultContext for getCurrent.
Caller should ensure that a DefaultContext is proper for this use.
Memory leaks and/or unexpected behaviour may occur if the automatic initializati
on is performed improperly.
This message may be avoided by performing initADFContext before using getCurrent
To see the stack trace for thread that is initializing this, set the logging lev
el of oracle.adf.share.ADFContext to FINEST>
<28-Sep-2012 14:08:24 o'clock BST> <Error> <Deployer> <BEA-149205> <Failed to in
itialize the application 'oim [Version=11.1.1.3.0]' due to error oracle.iam.plat
form.utils.OIMAppInitializationException:
OIM application intialization failed because of the following reasons:
oim-config.xml was not found in MDS Repository.
Unable to find keystore ".xldatabasekey" in <DOMAIN_HOME>/config/fmwconfig/.
Password for OIMSchemaPassword is not seeded in CSF.
Password for xell is not seeded in CSF.
Password for DataBaseKey is not seeded in CSF.
Password for JMSKey is not seeded in CSF.
Password for .xldatabasekey is not seeded in CSF.
Password for default-keystore.jks is not seeded in CSF.
Password for SOAAdminPassword is not seeded in CSF.
oracle.iam.platform.utils.OIMAppInitializationException:
OIM application intialization failed because of the following reasons:
oim-config.xml was not found in MDS Repository.
Unable to find keystore ".xldatabasekey" in <DOMAIN_HOME>/config/fmwconfig/.
Password for OIMSchemaPassword is not seeded in CSF.
Password for xell is not seeded in CSF.
Password for DataBaseKey is not seeded in CSF.
Password for JMSKey is not seeded in CSF.
Password for .xldatabasekey is not seeded in CSF.
Password for default-keystore.jks is not seeded in CSF.
Password for SOAAdminPassword is not seeded in CSF.
at oracle.iam.platform.utils.OIMAppInitializationListener.preStart(OIMAp
pInitializationListener.java:145)
at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.r
un(BaseLifecycleFlow.java:282)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
120)
at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListene
rAction.invoke(BaseLifecycleFlow.java:199)
Truncated. see log file for complete stacktrace
Caused By: oracle.iam.platform.utils.OIMAppInitializationException:
OIM application intialization failed because of the following reasons:
oim-config.xml was not found in MDS Repository.
Unable to find keystore ".xldatabasekey" in <DOMAIN_HOME>/config/fmwconfig/.
Password for OIMSchemaPassword is not seeded in CSF.
Password for xell is not seeded in CSF.
Password for DataBaseKey is not seeded in CSF.
Password for JMSKey is not seeded in CSF.
Password for .xldatabasekey is not seeded in CSF.
Password for default-keystore.jks is not seeded in CSF.
Password for SOAAdminPassword is not seeded in CSF.
at oracle.iam.platform.utils.OIMAppInitializationListener.preStart(OIMAp
pInitializationListener.java:145)
at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.r
un(BaseLifecycleFlow.java:282)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
120)
at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListene
rAction.invoke(BaseLifecycleFlow.java:199)
Truncated. see log file for complete stacktrace
>
<28-Sep-2012 14:08:24 o'clock BST> <Warning> <Munger> <BEA-2156203> <A version a
ttribute was not found in element application in the deployment descriptor in E:
\Oracle\Middleware\Oracle_IDM1\server\apps\spml-xsd.ear/META-INF/application.xml
. A version attribute is required, but this version of the Weblogic Server will
assume that the JEE5 is used. Future versions of the Weblogic Server will reject
descriptors that do not specify the JEE version.>
<28-Sep-2012 14:08:24 o'clock BST> <Warning> <Munger> <BEA-2156203> <A version a
ttribute was not found in element application in the deployment descriptor in E:
\Oracle\Middleware\user_projects\domains\IAM_domain\servers\oim_server1\tmp\_WL_
user\spml-xsd\s8d2b9/META-INF/application.xml. A version attribute is required,
but this version of the Weblogic Server will assume that the JEE5 is used. Futur
e versions of the Weblogic Server will reject descriptors that do not specify th
e JEE version.>
<28-Sep-2012 14:08:24 o'clock BST> <Emergency> <Deployer> <BEA-149259> <Server '
oim_server1' in cluster 'OIM_Cluster' is being brought up in administration stat
e due to failed deployments.>
Loading xalan.jar for XPathAPI.
14:08:30 INFO [[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default
(self-tuning)'] -
----------------- NEXAWEB SERVER LICENSE ------------------
- Customer ID : 122
- License type : Enterprise
- Max unique IPs : unlimited
- Max XUL sessions : unlimited
- Max CPUs/server : unlimited
- Clustering allowed : true
- Expiration date : none
Nexaweb Technologies Inc.(C)2000-2004. All Rights Reserved.
Nexaweb Technologies Inc.
10 Canal Park
Cambridge, MA 02141
Tel: 617.577.8100. Email: [email protected]
14:08:31 INFO [[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default
(self-tuning)'] - Clustering is OFF.
14:08:31 INFO [[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default
(self-tuning)'] - Servlet Engine: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PD
T 2011 1398638 Oracle WebLogic Server Module Dependencies 10.3 Thu Mar 3 14:37:5
2 PST 2011 Oracle WebLogic Server on JRockit Virtual Edition Module Dependencies
10.3 Thu Feb 3 16:30:47 EST 2011
14:08:31 INFO [[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default
(self-tuning)'] - Servlet API Version: 2.5
14:08:31 INFO [[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default
(self-tuning)'] - Nexaweb Server Info = Nexaweb Server 3.3.1072
14:08:31 INFO [[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default
(self-tuning)'] - Nexaweb Server initialized successfully.
<28-Sep-2012 14:08:34 o'clock BST> <Notice> <Log Management> <BEA-170027> <The S
erver has established connection with the Domain level Diagnostic Service succes
sfully.>
<28-Sep-2012 14:08:34 o'clock BST> <Notice> <Cluster> <BEA-000197> <Listening fo
r announcements from cluster using unicast cluster messaging>
<28-Sep-2012 14:08:34 o'clock BST> <Notice> <Cluster> <BEA-000133> <Waiting to s
ynchronize with other running members of OIM_Cluster.>
<28-Sep-2012 14:09:04 o'clock BST> <Notice> <Server> <BEA-002613> <Channel "Defa
ult[2]" is now listening on 127.0.0.1:14000 for protocols iiop, t3, CLUSTER-BROA
DCAST, ldap, snmp, http.>
<28-Sep-2012 14:09:04 o'clock BST> <Notice> <Server> <BEA-002613> <Channel "Defa
ult[3]" is now listening on 0:0:0:0:0:0:0:1:14000 for protocols iiop, t3, CLUSTE
R-BROADCAST, ldap, snmp, http.>
<28-Sep-2012 14:09:04 o'clock BST> <Notice> <Server> <BEA-002613> <Channel "Defa
ult[1]" is now listening on fe80:0:0:0:0:5efe:a2f:f22a:14000 for protocols iiop,
t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<28-Sep-2012 14:09:04 o'clock BST> <Warning> <Server> <BEA-002611> <Hostname "UK
SHWTOAP03A.skandia.co.uk", maps to multiple IP addresses: 10.47.242.42, 0:0:0:0:
0:0:0:1>
<28-Sep-2012 14:09:04 o'clock BST> <Notice> <Server> <BEA-002613> <Channel "Defa
ult" is now listening on 10.47.242.42:14000 for protocols iiop, t3, CLUSTER-BROA
DCAST, ldap, snmp, http.>
<28-Sep-2012 14:09:04 o'clock BST> <Notice> <WebLogicServer> <BEA-000330> <Start
ed WebLogic Managed Server "oim_server1" for domain "IAM_domain" running in Prod
uction Mode>
<28-Sep-2012 14:09:04 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Serve
r state changed to ADMIN>
<28-Sep-2012 14:09:04 o'clock BST> <Notice> <WebLogicServer> <BEA-000360> <Serve
r started in ADMIN mode>
**********************************OIM OID Ldap Sync Configuration Logs****************************
[2012-09-28T14:49:11.171+01:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JcD8obD9pYjpp0_AiY1GPQHh000003,0] [[
[OIM_CONFIG] Updating Ldap Sync Configuration
[2012-09-28T14:49:11.171+01:00] [as] [TRACE:16] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JcD8obD9pYjpp0_AiY1GPQHh000003,0] [SRC_CLASS: LdapSync] [SRC_METHOD: configurationLdap] ENTRY
[2012-09-28T14:49:11.171+01:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JcD8obD9pYjpp0_AiY1GPQHh000003,0] [SRC_CLASS: oracle.as.install.oim.config.util.LdapSync] [SRC_METHOD: configurationLdap] Create the Database connection
[2012-09-28T14:49:11.171+01:00] [as] [TRACE:16] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JcD8obD9pYjpp0_AiY1GPQHh000003,0] [SRC_CLASS: LdapSync] [SRC_METHOD: createDBConnection] ENTRY
[2012-09-28T14:49:11.296+01:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JcD8obD9pYjpp0_AiY1GPQHh000003,0] [SRC_CLASS: oracle.as.install.oim.config.util.LdapSync] [SRC_METHOD: configurationLdap] isLIBOVD:true
[2012-09-28T14:49:11.312+01:00] [as] [TRACE:16] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JcD8obD9pYjpp0_AiY1GPQHh000003,0] [SRC_CLASS: LdapSync] [SRC_METHOD: closeDBConnection] ENTRY
[2012-09-28T14:49:11.312+01:00] [as] [TRACE:16] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JcD8obD9pYjpp0_AiY1GPQHh000003,0] [SRC_CLASS: LdapSync] [SRC_METHOD: closeDBConnection] RETURN
[2012-09-28T14:49:11.312+01:00] [as] [TRACE:16] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JcD8obD9pYjpp0_AiY1GPQHh000003,0] [SRC_CLASS: LdapSync] [SRC_METHOD: configurationLdap] RETURN
[2012-09-28T14:49:11.312+01:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JcD8obD9pYjpp0_AiY1GPQHh000003,0] [[
Updated LDAP Server Details in mds schema
[2012-09-28T14:49:11.312+01:00] [as] [TRACE:16] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JcD8obD9pYjpp0_AiY1GPQHh000003,0] [SRC_CLASS: LdapSync] [SRC_METHOD: configurationLdap] RETURN
[2012-09-28T14:49:11.812+01:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JcD8obD9pYjpp0_AiY1GPQHh000003,0] [OIM_CONFIG] Updated LDAPContainerRules.xml.
[2012-09-28T14:49:11.812+01:00] [as] [TRACE:16] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JcD8obD9pYjpp0_AiY1GPQHh000003,0] [SRC_CLASS: mdsMetadata] [SRC_METHOD: loadEventhandler] RETURN
[2012-09-28T14:49:14.687+01:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JcD8obD9pYjpp0_AiY1GPQHh000003,0] [[
[OIM_CONFIG] Created jobs using seedSchedulerData. Log location C:\Program Files\Oracle\Inventory\logs
[2012-09-28T14:49:14.687+01:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JcD8obD9pYjpp0_AiY1GPQHh000003,0] File not found[[
java.io.FileNotFoundException: File not found
     at java.util.zip.ZipFile.open(Native Method)
     at java.util.zip.ZipFile.<init>(ZipFile.java:117)
     at java.util.jar.JarFile.<init>(JarFile.java:135)
     at java.util.jar.JarFile.<init>(JarFile.java:72)
     at oracle.as.install.oim.config.util.RoleSODJarUtil.updateFile(RoleSODJarUtil.java:32)
     at oracle.as.install.oim.config.OIMConfigManager.configureOIM(OIMConfigManager.java:783)
     at oracle.as.install.oim.config.OIMConfigManager.doExecute(OIMConfigManager.java:538)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:662)
[2012-09-28T14:49:14.687+01:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JcD8obD9pYjpp0_AiY1GPQHh000003,0] [[
[OIM_CONFIG] Failed configuration step Configure OIM Server
[2012-09-28T14:49:14.702+01:00] [as] [ERROR] [] [oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager] [tid: 12] [ecid: 0000JcD8obD9pYjpp0_AiY1GPQHh000003,0] One or More configurations failed. Exiting
[2012-09-28T14:49:14.702+01:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JcD8obD9pYjpp0_AiY1GPQHh000003,0] Install Adapter: Mark End for:CONFIG
[2012-09-28T14:49:14.702+01:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JcD8obD9pYjpp0_AiY1GPQHh000003,0] Install Adapter: Mark End for:INTERVIEW
[2012-09-28T14:49:14.702+01:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JcD8obD9pYjpp0_AiY1GPQHh000003,0] Install Adapter: Mark End for:INSTALL
[2012-09-28T14:49:14.702+01:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JcD8obD9pYjpp0_AiY1GPQHh000003,0] Install Adapter: Mark End for:COPY
[2012-09-28T14:49:14.702+01:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JcD8obD9pYjpp0_AiY1GPQHh000003,0] Install Adapter: Mark End for:LINK
[2012-09-28T14:49:14.765+01:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000JcD8obD9pYjpp0_AiY1GPQHh000003,0] Setting valueOf(IS CONFIGURATION SUCCESSFUL) to:false. Value obtained from:USER
[2012-09-28T15:11:21.461+01:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 11] [ecid: 0000JcD2jfD9pYjpp0_AiY1GPQHh000002,0] Setting valueOf(IS CONFIGURATION SUCCESSFUL) to:false. Value obtained from:USER
[2012-09-28T15:11:27.914+01:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 11] [ecid: 0000JcD2jfD9pYjpp0_AiY1GPQHh000002,0] Setting valueOf(IS CONFIGURATION SUCCESSFUL) to:false. Value obtained from:USER
Regards,
Ravi.

Your log files too give some hint... Please verify whether following files like .xldatabasekey are present in your environment:-
OIM application intialization failed because of the following reasons:
oim-config.xml was not found in MDS Repository.
Unable to find keystore ".xldatabasekey" in <DOMAIN_HOME>/config/fmwconfig/.
Password for OIMSchemaPassword is not seeded in CSF.
Password for xell is not seeded in CSF.
Password for DataBaseKey is not seeded in CSF.
Password for JMSKey is not seeded in CSF.
Password for .xldatabasekey is not seeded in CSF.
Password for default-keystore.jks is not seeded in CSF.
Password for SOAAdminPassword is not seeded in CSF.
I doubt whether OIM is properly installed in your environment otherwise .xldatabasekey would have been present in <DOMAIN_HOME>/config/fmwconfig..
Also, as far as Weblogic starting in ADMIN mode is concerned, you may try to do the following...
ps -eaf| grep AdminServer
Kill the process
Then remove the lok file. i.e. Lock files...
rm -rf /home/oracle/Oracle/Middleware/user_projects/domains/oimdomain/servers/oim_server1/tmp/*oim_server1.lok*
rm -rf /home/oracle/Oracle/Middleware/user_projects/domains/oimdomain/servers/soa_server1/tmp/*soa_server1.lok*
rm -rf /home/oracle/Oracle/Middleware/user_projects/domains/oimdomain/servers/AdminServer/tmp/*AdminServer.lok*
After that
Take the backup of /home/oracle/Oracle/Middleware/user_projects/domains/<DOMAIN_HOME>/servers/AdminServer/data/ldap/ldapfiles (I mean CUT this folder and save it in Backup folder..
Share the result with us....

Integration Directory(Configuration) Problem

Hi All,
I am facing one Probelm. I am working one the client through Citrix. I am not able to open Integration Directory(Configuration Problem) . In onsite it's working fine. Reming all other applications(Integartion Repository and SLD and Runtime work bench) are working fine.
if I open Integration Directory i am getting this messge.
<jnlp spec="1.0+" codebase="http://filp55.group.upm-kymmene.com:50100/dir">
    <information>
        <title>Integration Builder</title>
        <vendor>SAP AG</vendor>
        <homepage href="http://www.sap.com" />
        <description type="one-line">Directory</description>
        <description type="short">Directory</description>
        <description type="tooltip">Directory</description>
        <icon hight="64" href="start/graphics/sap6464.gif" type="splash" width="64" />
        <icon hight="32" href="start/graphics/SAP3232.gif" width="32" />
    </information>
    <security>
        <all-permissions />
    </security>
    <resources>
        <j2se version="1.4+" initial-heap-size="32m" max-heap-size="1024m" />
        <jar href="directory/aii_ibdir_client.jar" />
        <jar href="directory/aii_ibdir_core.jar" />
        <jar href="directory/aii_ibdir_sbeans.jar" />
        <jar href="directory/aii_ibdir_rb.jar" />
        <jar href="directory/aii_ib_client.jar" />
        <jar href="directory/aii_ib_core.jar" />
        <jar href="directory/aii_ib_sbeans.jar" />
        <jar href="directory/aii_ib_rb.jar" />
        <jar href="directory/aii_util_icons.jar" />
        <jar href="directory/aii_util_swing.jar" />
        <jar href="directory/aii_util_xml.jar" />
        <jar href="directory/aii_util_xsd.jar" />
        <jar href="directory/aii_utilxi_misc.jar" />
        <jar href="directory/aii_util_rb.jar" />
        <jar href="directory/clientaii_ib_sbeans.jar" />
        <jar href="directory/clientaii_ibdir_sbeans.jar" />
        <jar href="directory/frog.jar" />
        <jar href="directory/focus14.jar" />
        <jar href="directory/sapxmltoolkit.jar" />
        <jar href="directory/jta.jar" />
        <jar href="directory/ejb20.jar" />
        <jar href="directory/exception.jar" />
        <jar href="directory/logging.jar" />
        <jar href="directory/guidgenerator.jar" />
        <jar href="directory/jperflib.jar" />
        <jar href="directory/sapni.jar" />
        <jar href="directory/sapj2eeclient.jar" />
        <property name="sap.theme" value="Streamline" />
        <property name="jnlp.log.initialConfiguration" value="FILE, SIMPLE" />
    <property name="jnlp.com.sap.aii.ib.client.properties" value="com.sap.aii.ib.client., com.sap.aii.ib.core., com.sap.aii.util.xml., com.sap.aii.connect., com.sap.aii.repository.mapping.additionaltypes, com.sap.aii.docu., com.sap.aii.ibrep.core., com.sap.aii.ibdir.core.*" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.sysnr" value="01" /><property name="jnlp.com.sap.aii.connect.landscape.contextroot" value="sld" /><property name="jnlp.com.sap.aii.connect.cr.name" value="filp40.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.ib.client.content.languages" value="EN,DE" /><property name="jnlp.com.sap.aii.connect.repository.contextroot" value="rep" /><property name="jnlp.com.sap.aii.ib.client.login.languages" value="EN,DE" /><property name="jnlp.com.sap.aii.connect.directory.rmiport" value="50104" /><property name="jnlp.com.sap.aii.connect.cr.contextroot" value="sld" /><property name="jnlp.com.sap.aii.connect.rwb.r3.client" value="790" /><property name="jnlp.com.sap.aii.connect.directory.contextroot" value="dir" /><property name="jnlp.com.sap.aii.connect.rwb.contextroot" value="rwb" /><property name="jnlp.com.sap.aii.connect.landscape.httpsport" value="@com.sap.aii.server.httpsport.lcr@" /><property name="jnlp.com.sap.aii.connect.repository.rmiport" value="50104" /><property name="jnlp.com.sap.aii.connect.repository.httpport" value="50100" /><property name="jnlp.com.sap.aii.connect.directory.name" value="filp55.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.connect.cr.httpsport" value="@com.sap.aii.server.httpsport.cr@" /><property name="jnlp.com.sap.aii.connect.repository.name" value="filp55.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.connect.integrationserver.contextroot" value="run" /><property name="jnlp.com.sap.aii.connect.integrationserver.name" value="filp55.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.connect.rwb.httpsport" value="@com.sap.aii.connect.rwb.httpsport@" /><property name="jnlp.com.sap.aii.connect.landscape.httpport" value="50000" /><property name="jnlp.com.sap.aii.docu.languages" value="null" /><property name="jnlp.com.sap.aii.ib.client.jnlp.j2se.initialheapsize" value="32m" /><property name="jnlp.com.sap.aii.util.xml.parserFactory" value="com.sap.engine.lib.jaxp.SAXParserFactoryImpl" /><property name="jnlp.com.sap.aii.connect.directory.httpport" value="50100" /><property name="jnlp.com.sap.aii.connect.directory.httpsport" value="@com.sap.aii.server.httpsport.directory@" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.httpport" value="8001" /><property name="jnlp.com.sap.aii.connect.rwb.name" value="filp55.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.client" value="790" /><property name="jnlp.com.sap.aii.connect.cr.httpport" value="50000" /><property name="jnlp.com.sap.aii.connect.landscape.name" value="filp40.group.upm-kymmene.com" /><property name="jnlp.SAPMYNAME" value="filp55_GTX_01" /><property name="jnlp.com.sap.aii.connect.rwb.httpport" value="50100" /><property name="jnlp.com.sap.aii.docu.url" value="null" /><property name="jnlp.com.sap.aii.ib.client.applicationname.directory" value="sap.com/com.sap.xi.directory/" /><property name="jnlp.com.sap.aii.util.xml.transformerFactory" value="com.sap.engine.lib.jaxp.TransformerFactoryImpl" /><property name="jnlp.com.sap.aii.ib.client.applicationname.repository" value="sap.com/com.sap.xi.repository/" /><property name="jnlp.com.sap.aii.ib.client.login.InitialContextFactory" value="com.sap.engine.services.jndi.InitialContextFactoryImpl" /><property name="jnlp.com.sap.aii.connect.integrationserver.httpport" value="50100" /><property name="jnlp.client" value="true" /><property name="jnlp.com.sap.aii.connect.repository.httpsport" value="@com.sap.aii.server.httpsport.repository@" /><property name="jnlp.com.sap.aii.ib.client.jnlp.j2se.maxheapsize" value="1024m" /><property name="jnlp.com.sap.aii.connect.integrationserver.httpsport" value="@com.sap.aii.connect.integrationserver.httpsport@" /><property name="jnlp.com.sap.aii.connect.integrationbuilder.startpage.url" value="rep/start/index.jsp" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.httpsport" value="@com.sap.aii.connect.integrationserver.r3.httpsport@" /><property name="jnlp.com.sap.aii.connect.rwb.r3.sysnr" value="01" /><property name="jnlp.com.sap.aii.util.xml.schemaValidator" value="com.sap.engine.lib.schema.validator.SchemaValidator" /><property name="jnlp.rc.release" value="7_00" /><property name="jnlp.rc.applname" value="DIRECTORY" /><property name="jnlp.rc.supportpackage" value="09" /><property name="jnlp.rc.synctime" value="${sync.time}" /></resources>
    <application-desc main-class="com.sap.aii.ibdir.gui.appl.ApplicationImpl">
        <argument>webstart</argument>
    </application-desc>
</jnlp>
Please help me on this..........
Thanks in Advacne.
Regards,
Chandra

Hello,
1)
May be the problem is a network connectivity issue. Do one thing copy the "cahce" folder from some other client PC(which has successfully opened IR and ID) to your client PC. The folder resides in "C:Documents and Settings<yourUserProfile>Application DataSunJavaDeploymentjavaws".
Copy "cache" folder to your client PC under the above path.
/people/shabarish.vijayakumar/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken]
2) Go to http://filp55.group.upm-kymmene.com:50100/rep/
Click on Administration -> Java Web Start -> Java Web Start Administration ->
Try
1. Re-initialization (then try logging)
2. Re-initialization and force-signing (then try logging)
3. Delete lock (then try logging)
Do this for IR and ID tabs.
3) Check can be a firewall issue.
4) Check wether sufficient roles have been assigned -> Tcode -> SU01 -> roles tab. These roles need to be assigned to your username
SAP_BC_AI_LANDSCAPE_DB_RFC
SAP_SLD_CONFIGURATOR
SAP_SLD_DEVELOPER
SAP_XI_BPE_CONFIGURATOR_ABAP
SAP_XI_BPE_MONITOR_ABAP
SAP_XI_DEVELOPER
SAP_XI_DEVELOPER_ABAP
SAP_XI_DEVELOPER_J2EE
SAP_XI_MONITOR
SAP_XI_MONITOR_ABAP
SAP_XI_MONITOR_J2EE
<b>*******************Reward,if found useful</b>
Edited by: BVS on May 7, 2008 3:01 PM

Good afternoon.I have a computer with W Vista 8, Windows office home and business 2013. I recently tried to install Photoshop Elements by CD with serial number but on the desktop appears the following message: error 1 (configuration problem) try to uninst

What's error 1 in adobe photoshop elements configuration? I have a computer with W Vista 8, Windows office home and business 2013. I recently tried to install Photoshop Elements by CD with serial number but on the desktop appears the following message: error 1 (configuration problem) try to uninstall and reinstall. I have done this but the message continues to appear

You haven't mentioned which version of PSE. If it is PSE 13, that requires a minimum of windows 7.

Itunes starts but fails to open due to audio configuration problem

Hi
I have been running itunes 7.1 quite successfully until today. Running on windows xp/toshiba laptop.
Problem occurs when i select itunes on desktop, itunes appears on task bar below, after a number of seconds the following error message appears "itunes cannot run because it has detected a problem with your audio configuration", once I click ok on this message itunes terminates.
No changes have been made to my audio configuration (to the best of my knowledge), i can run Windows Media Player and that works fine, so too real player.
I reinstalled itunes, but this did not resolve the problem. I also ran itunes from another logon on my laptop and that presented the same error. I checked all my audio settings in the control panel and also ran the diagnostics on each device and all appears to be fine.
Has anybody faced the same issue, and could anybody advise on any diagnistic tool that could assist in pinpointing the configuration problem?.
Thanks
Toshiba Satellite Windows XP Pro

Hi
Got it resolved, thanks for the prompt responses all!.
Resolved by removal current version of Quicktime thru the control panel (add/remove programs), and then reinstalled from the website.
Phew!
Toshiba Satellite Windows XP Pro

Itunes can't run bc of audio configuration problem

Well I've been using itunes for about 2 years now and just recently i installed the newer version. It was working fine until today when my computer told me ther was some kind of computer error and that i should do a system restore. So i did a restore to about 2 weeks ago which was before i updated my itunes. And then i was getting the message that my itunes was missing files and could not run. So i ran a repair on it and still got the same error. Then I deleted it adn reinstalled and I got the error "Itunes cannot run because it has detected a problem with your audio configuration.
So then I undid the system restore and tried itunes to see if it would work. And I was still getting the same message that itunes cannot run because it has detected a problem with your audio configuration. So then I uninstalled it and reinstalled it and still getting the same message.
Can someone help me out? What problem would it be with my audio configuration? I haven't changed anything. Is there something i can adjust to fix the problem? I'm clueless....

the message is typically produced by a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.)
perhaps let's start with the following document:
iTunes 7 for Windows: iTunes had detected an audio configuration problem
... but if no joy there, try this alternate technique for swapping out your QuickTime:
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

Audio Configuration problem detected after install

During the download of the new ITunes version I had a major power failure. I went back and completed the download and after the installation I got an error message that ITunes could not be opened due to an audio configuration problem detected. I went to the Apple site and downloaded a new version from scratch and after the install I got the same audio error. Any Suggestions?

Perhaps this Apple KnowledgeBase article will help:
iTunes 7 for Windows: iTunes has detected an audio configuration problem
Hope that helps.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards.

Audio configuration problem in iTunes

I am running iTunes 7.1.1.5 (WinXP). When opening iTunes, I get an error message that there "are problems with your audio configuration." In iTunes support, I followed instructions to remove Quicktime then reinstall as standalone (without iTunes). Same problem persists. I will add that same problem occurred about a month ago, but that time the same steps of removing Quicktime, then reinstalling as standalone corrected the problem. Unfortunately, it recurred.

See if this helps:
iTunes 7 for Windows: iTunes has detected an audio configuration problem
http://docs.info.apple.com/article.html?artnum=304424

Could not start the app due to a configuration problem - Launchpad issue

Hi,
When I try to launch a custom app from Fiori Launchpad I get an error could not start app due to configuration problem. Error 500- Internal Server Error.
App works correctly when I try to execute via URL http://XXX/sap/bc/ui5_ui5/sap/zmyfioriui5_v11.
Screenshot of Chrome debugging and lpd_cust attached.
It seems problem with ResolveLink but unable to conclude.
Any Suggestion how to proceed.
Thanks,
Mayank

Hi Mayank,
Few modifications :
For additional information field : ".component" at the end is not required.
Only keep : SAPUI5.Component=sap.ui.demo.myFiori
Check this screenshot :
Also, please don't keep Semantic object name and application alias as same name i.e. ymyfioriui5_v11. Its very confusing.
If above doesn't solve, please confirm below :
ZXXXLPD is your launchpad role in LPD_CUST tcode.
Please use TRANSACTIONAL instead of transactional (might be case sensitive)
Show your semantic object "ymyfioriui5_v11" created in /UI2/SEMOBJ
Regards,
Tejas

Can't run form from Form Builder 10g - Port configuration problem?

Hi,
I have installed the Database (10.2.0.1.0) and the Developer Suite (10.1.2.0.2) on two Linux machines (Red Hat Enterprise Linux ES 4 Basic).
If I enter the frmservlet-URL manually everything seems to be fine.
In one case I enter http://127.0.0.1:8890/forms/frmservlet, in the other http://127.0.0.1:8889/forms/frmservlet; in BOTH cases I get eventually a dark square and the status bar says "Applet oracle.forms.engine.Main started".
HOWEVER, if I create a simple form with Form Builder and click on the Button with the green traffic light ("Run Form"), the form runs only on the machine where frmservlet listens on port 8890.
On the other machine (frmservlet configured to listen on port 8889) Firefox pops up, the URL "http://127.0.0.1:32979/6dOrpwghCqnp8PhMT7KVT533m3IaArqFbPqPBOztZXWYSsNy" gets called, and nothing else happens. The screen displays the string "ORACLE FORMS." and the status bar says "Waiting for 127.0.0.1...", and it stays like this forever.
I assume this is a port configuration problem, but I don't have a clue where to start.
Any suggestions how I should proceed are greatly appreciated.
Thank you very much in advance!

Hi Frank,
Thank you for your reply.
I doublechecked my configuration.
In the dialog Edit --> Preferences --> Runtime the Application Server URL is set to "127.0.0.1:8889/forms/frmservlet".
However, when I attempt to run the form, the URL "http://127.0.0.1:33140/W2dwbV9eXS2fPkuKlxNhCxFWdEihwDviat2uV7ycrSotqwDN" gets called.
The screen displays the string "ORACLE FORMS." and the status bar says "Waiting for 127.0.0.1...", and that's it.
I wonder how the port number 33140 got selected. Interestingly, this time it is a different number; last time it was port 32979. In fact, the port number seems to change each time; I tried again and now it is 33189.
I will now try to set the port number for the frmservlet to 8890.
I choose Edit --> Preferences --> Runtime and set the application server URL to "127.0.0.1:8890/forms/frmservlet".
I stop the container, open /home/oracle/OraHome_1/j2ee/DevSuite/config/default-web-site.xml and change the port number to 8890:
<?xml version="1.0" standalone='yes'?>
<!DOCTYPE web-site PUBLIC "Oracle Application Server 10g XML Web-site" "http://xmlns.oracle.com/ias/dtds/web-site.dtd">



<web-site port="8890" protocol="http"
display-name="Oracle Developer Suite 10g instance of Oracle Containers for J2EE Web Site">

     
     
     <default-web-app application="default" name="defaultWebApp" root="/j2ee" />

<web-app application="forms" name="formsweb" root="/forms" />


<web-app application ="reports" name="web" root="/reports" />
<web-app application = "reports" name="demo" root="/repdemo" />
     
     <access-log path="../log/default-web-access.log" />
</web-site>
I restart the container, start Form Builder, connect to the database, and open my test form.
When attempting to run the form, the URL "http://127.0.0.1:33437/Pl0n3ky9vmU5z37A7ScBnQhsGwq3jwuzJpgTAKWPMOYIzT8K" gets called (again a new port number, apparently picked radomly within a certain range) and nothing happens: "Waiting for 127.0.0.1...".
However, when I enter the URL http://127.0.0.1:8890/forms/frmservlet I do (eventually, after confirming that I trust the certificate etc.) get a darc rectangle and the status message "Applet oracle.forms.engine.Main started", which tells me that my setup can't be that far off target.
Here is the output of netstat:
[root@localhost ~]# netstat -anp --tcp
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:32769 0.0.0.0:* LISTEN 2779/rpc.statd
tcp 0 0 0.0.0.0:23910 0.0.0.0:* LISTEN 5269/java
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 2759/portmap
tcp 0 0 0.0.0.0:1521 0.0.0.0:* LISTEN 4265/tnslsnr
tcp 0 0 0.0.0.0:113 0.0.0.0:* LISTEN 2983/xinetd
tcp 0 0 127.0.0.1:7830 0.0.0.0:* LISTEN 4429/spamd --port 7
tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 2928/cupsd
tcp 0 0 0.0.0.0:9240 0.0.0.0:* LISTEN 5269/java
tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 3002/sendmail: acce
tcp 0 0 0.0.0.0:8890 0.0.0.0:* LISTEN 5269/java
tcp 0 0 0.0.0.0:32795 0.0.0.0:* LISTEN 4231/ora_d000_orcl
tcp 0 0 127.0.0.1:1521 127.0.0.1:32817 ESTABLISHED 4265/tnslsnr
tcp 0 0 127.0.0.1:32817 127.0.0.1:1521 ESTABLISHED 4209/ora_pmon_orcl
tcp 0 0 127.0.0.1:33425 127.0.0.1:1521 ESTABLISHED 5298/frmbld
tcp 0 0 127.0.0.1:1521 127.0.0.1:33425 ESTABLISHED 5311/oracleorcl
tcp 1 0 80.133.127.83:33485 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 1 0 80.133.127.83:33484 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 1 0 80.133.127.83:33494 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 1 0 80.133.127.83:33520 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 0 0 80.133.127.83:33529 209.132.177.100:443 ESTABLISHED 4060/python
tcp 0 0 80.133.127.83:33528 209.132.177.100:443 ESTABLISHED 4060/python
tcp 1 0 80.133.127.83:33460 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 1 0 80.133.127.83:33470 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 0 0 :::22 :::* LISTEN 2968/sshd
tcp 0 0 ::ffff:127.0.0.1:33437 :::* LISTEN 5298/frmbld
tcp 697 0 ::ffff:127.0.0.1:33437 ::ffff:127.0.0.1:33439 CLOSE_WAIT -
tcp 348 0 ::ffff:127.0.0.1:33437 ::ffff:127.0.0.1:33440 CLOSE_WAIT -
[root@localhost ~]#
The question remains: Where do those port numbers come from?
Regards,
jme

Configuration problem with param or code problem

Hi,
Im new to this jsp. Currently, i have some some Q here. Im trying on the jsp-tutorial with
<%@ taglib prefix="my"
uri="./jsp2/jsp2-example-taglib.tld" %>
<HEAD>
<TITLE>Functions</TITLE>
</HEAD>
<BODY>
<H3>Add Numbers</H3>
<P>
<FORM action="./compute.jsp" method="GET">
X = <input type="text" name="x" value="${param["x"]}">
<BR>
Y = <input type="text" name="y" value="${param["y"]}">
<input type="submit" value="Add Numbers">
</FORM>
<P>
The sum is: ${my:add(param["x"],param["y"])}
</BODY>
</HTML>
inside the text box it appear the text with ${param[[/i], may i know is it a configuration problem?
Thx for reply

Probably yes it is a configuration problem.
You have a JSP2.0 container? (eg Tomcat 5)
If your web.xml starts with this:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems,
Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
Replace it with this
<?xml version="1.0" encoding="ISO-8859-1"?>
<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
version="2.4">
That should fix it.
http://forum.java.sun.com/thread.jspa?threadID=629437&
tstart=0Sorry,
I already hav
<?xml version="1.0" encoding="ISO-8859-1"?>
<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
version="2.4">
originaly.

Configuration problem with external Western Digital My Book 2 TB drive

How do I fix a configuration problem with my external Western Digital My Book 2 TB drive which used to both read and write. Something has happened so that the drive is now read only? There is 600 GB of data on the drive that I cannot lose, thus am very concerned about messing around with formatting the drive which is raid 1 and filled with data.

may not like to hear, but I'd skip on MyBook cases, nice looking as they are.
Get a 2nd drive case to recover to.
http://www.macsales.com/firewire
may need to play with the demo Data Rescue 3 from Prosoft
Backup/recover before repair is usually in order
never have one backup set. THREE sets of your data, minimum.
3rd party disk maintenance and repair should be a must and given rather than rely solely on Apple Disk Utility.
Data and system maintenance and recovery plan - should be like practice for sports, arts, military with practice and making sure you will know how and the tools you need - ahead of time
Resetting USB/FW ports, try another if one won't work. When 10.6 came out there was a lot of grinding teeth with external drives not working or mounting.

Trash and Send . I have a new IPAD 2 and I do not have any of my e mails in the send and trash folders. I have had the IPAD about three weeks and have sent and deleted many e mails. Do I have some wrong settings or configuration problem??

I purchased an IPAD 2 about three weeks ago. When I go to my Trash and Send foloders it appears that none of my deleted or sent e mails are bing captured/stored in these folders. do i have a configuration problem???

Once you connect to the Wifi Network once, then the iPhone or iPad remembers it and attempts to connect automatically in the future, but you have to tap to connect to that Wifi the first time. Like the first time you get on your home wifi, or the first time you go the a certain hotel, etc.
Now, one you navigate to Settings > Wifi and tap on the network you wish to connect to, if you are having issues there, use this article to help you: http://support.apple.com/kb/TS1398

PERFECT solution to Photoshop CC2014 configurator problem

Actually, this is the PERFECT solution to Photoshop CC2014 lack of configurator problem.
I looked around for some program that could put up a window on screen with a row of 'buttons' that you could could program and click on like configurator.
There may be one, but I couldn't find it. So I did a bit of lateral thinking and bought an external device that that has rows of real buttons that you can program with whatever keystroke combinations to like.
I bought a RAZER ORBWEAVER which is as gaming device, but works perfectly with Photoshop - Windows or Mac - and any other software you want shortcuts for. You can get them on Amazon for about $100 though I actually got mine on eBay. There are cheaper similar devices, but the Orbweaver seems pretty tough and gets good reviews. If there isn't a key shortcut for what you want to do, simply go to Edit/Keyboard Shortcuts in Photoshop CC2014 and create one (making sure you use a combination that isn't already in use) Then it's simply a matter of programming the 20 buttons on the Orbweaver to your chosen keystrokes. I have printed a chart to remind me of all the settings.
This means too, that no matter what Adobe do to future software (apart from eliminating ALL keystrokes) this solution is future proof.

Did also some lateral thinking and bought a ShuttlePRO v2...
SUPER !!!
Highly recommended !

Configuring problem..again! h-e-l-p!

So, I switched to the Linksys router after my other router would not be recognized by my computer. Configuring problems. Then I get this one..and the directions are so easy, I don't think that anything can go wrong. I have followed the directions exactly, all the proper lights are on..but once it gets to the installation part where it has to configure...it says that there is an error! Again! NOOO! I want this to work more than anything, so I hope someone may be able to help me. The first time I tried it said there was a problem sending a language pack? Then I pressed retry and the next time it said there was a data sending error. I pressed retry once again and the configuring would not go past 0% before 5 or so minutes passed and that dreadful "Data sending error!" and then "failure configuring router, would you like to try again?" screens came up!
Someone pleassssse help!
Message Edited by redsoxlove on 05-26-200711:39 AM

Just log into the router at 192.168.1.1 and configure it manually. No need to use the cd.

8330 SYNC/CONFIGURE Problems

Similar Messages

Maybe you are looking for