8350i Nextel Direct Connect doesn't work with GM Onstar Bluetooth
Paired my 8350i to my 2009 Chevy Silverado with Onstar and Bluetooth. Can make and receive phonecalls with Bluetooth but Direct Connect cannot. I have to turn off Bluetooth on the 8350i in order to utilize Direct Connect.
I have an 8350i with Nextel, and had similar issues with the Bluetooth in my 2012 Hyundai Accent. Also by accident, I was able to figure out how to work the Nextel. You do need to use the PTT button on the phone as you normally would. (If you try listening in the handset it will not work, the connection to the bluetooth in the car needs to activate.) If someone initiates a PTT conversation with you press the green "pick up call" button on the vehicle's bluetooth. This will cause the bluetooth connection with the vehicle to activate. Then you will be able to hear and speak through the vehicles bluetooth system while pressing and releasing the PTT button as you would if you were using Nextel through the handset.
It is even more awkward if you try placing a PTT call. Hit the green "pick up call" button and even though the bluetooth system will be asking you for verbal commands to initiate a phone call, ignore them and "chirp" the person as you normally would. It will work, not pretty, but it will work. At the end of the call the system will still be asking for verbal commands, but simply hang up.
This worked whether the phone was in vibrate, speaker or not.
Similar Messages
-
Direct Rendering doesn't works with radeon
Hi everybody,
I have a Radeon 7000. Then, I want to use the open-source driver.
But it doesn't works...
[nicolas@SonyVaio ~]$ glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGIS_multisample,
GLX_SGIX_fbconfig, GLX_EXT_texture_from_pixmap
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.5.1)
OpenGL extensions:
GL_ARB_depth_texture, GL_ARB_imaging, GL_ARB_multitexture,
GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_shadow,
GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
GL_ARB_texture_non_power_of_two, GL_ARB_texture_rectangle,
GL_ARB_transpose_matrix, GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra,
GL_EXT_blend_color, GL_EXT_blend_func_separate, GL_EXT_blend_logic_op,
GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
GL_EXT_copy_texture, GL_EXT_draw_range_elements, GL_EXT_fog_coord,
GL_EXT_framebuffer_object, GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels,
GL_EXT_point_parameters, GL_EXT_polygon_offset, GL_EXT_rescale_normal,
GL_EXT_secondary_color, GL_EXT_separate_specular_color,
GL_EXT_shadow_funcs, GL_EXT_stencil_wrap, GL_EXT_subtexture,
GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_lod_bias, GL_EXT_texture_object,
GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_APPLE_packed_pixels,
GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once,
GL_ATIX_texture_env_combine3, GL_IBM_texture_mirrored_repeat,
GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
GL_NV_blend_square, GL_NV_point_sprite, GL_NV_texgen_reflection,
GL_NV_texture_rectangle, GL_SGIS_generate_mipmap,
GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
GL_SGIS_texture_lod, GL_SGIX_depth_texture, GL_SGIX_shadow,
GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays
glu version: 1.3
glu extensions:
GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x23 24 tc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x24 24 tc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x25 24 tc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x26 24 tc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x27 24 dc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x28 24 dc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x29 24 dc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x2a 24 dc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
See my /etc/X11/xorg.conf :
# Copyright 2004 The X.Org Foundation
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
# Load "type1"
# Load "speedo"
Load "freetype"
# Load "xtt"
# This loads the GLX module
Load "glx"
# This loads the DRI module
Load "dri"
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_>/<KP_> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
# Option "XkbVariant" "fr"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.0 - 50.0
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 43-75
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "** ATI Radeon (generic) [radeon]"
Driver "radeon"
#VideoRam 8192
# Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "** ATI Radeon (generic) [radeon]"
Monitor "My Monitor"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
I precise I loaded my modules : dri, radeon, ati_agp and intel_agp.
Any ideas ?
ThanksFor Radeon 7000, you need to:
pacman -S xf86-video-ati
You need to load those modules in /etc/rc.conf:
MODULES=(agpgart via-agp)
And in xorg.conf:
Driver "radeon" -
Ad hoc connection doesn't work with my 3gs but works with my touch
I setup an ad hoc connection on my laptop following a guide on the internet.
I did this on windows 7 32bit, it worked for my ipod touch but for some reason it won't work with my iphone 3gs (upgraded with the latest updates)
I connect to the wireless network, it shows its connected (with the wifi symbol at the top in the iphone's status bar) but as soon as i try using the internet via safari or any other app, it reverts back to using 3g or edge networks. I've checked and after reverting it still shows wifi is connected but the wifi symbol is no longer in the status bar and judging by the speed of the connection it really isn't connected to wifi.
Any ideas why this is happening?
It's just so odd that it works on my ipod touch but not on my iphone 3gs... Can't be a windows related problem.Did you ever get this fixed? I'm having the same problem and can't figure out the solution.
-
Address Book bluetooth connection doesn't work with Nokia N90
I can't set up my Nokia N90 to work with the Address book for bluetooth dialing & sending SMS.
Does anyone else have this problem?I found this info on the forum.
1. Check if the isync agent is installed on your phone. If not get go to your application folder/isync. control-click on the icon and choose "show package content". Navigate to /Contents/PlugIns/ApplePhoneConduit.syncdevices/Contents/Resources/Agents and drag a copy of AppleSyncAgent-s60v22.sis to your desktop.
2. Use the bluetooth "send file" option to send that file to your nokia. You will receive a message on the phone. Open that message and install the agent.
3. Remove your phone from the device list in isync and add it again.
4. Open address book and click bluetooth. It should connect straight away (no pairing request).
5. Now sending sms should be enabled.
6. Open isync and sync your device. -
Adobe Dreamweaver FTP connection doesn't work with german "Umlaut" like "ö" in the severadress
Hi
Today I tried to establish a FTP connection to the serveradress "ftp.möbelverwandlung.com", but I get the error message that the program couldn't connect to the host. As Dreamweaver works perfectly with other serveradresses and I managed to establish a connection to "ftp.möbelverwandlung.com" with other programs, I think that the problem is the german "Umlaut" "ö". Did anyone recognize the same problem and does someone know a solution?
Thank you very much for your helpHere is the English translation of your previous post -
Hello Maximilian,
I got a even looked at my provider. Usually there must pay the original domain for the agreed period and agree a new. However, they show a accommodating for so short "duration" of a few hours like you. Try to contact your ISP phone support.
MfG
Hans-Günter
Anyhow, I think you have covered the options! -
In my envy 13, the hdmi connection doesn't work with windows 8
everything works properly in the laptop, except the HDMI connection
I wrote this VI to investigate how to integrate a Joystick into my LabVIEW code (I called the VI "Joystick Sampler"). It has two parts -- the lower function, "Query Input Devices", makes an array of devices, their names and number of Axes, Buttons, and POV "hats", in an array called "Joystick Info". Look at this first, paying attention to the Array Index that seems to correspond to your Joystick when you plug it into a USB port.
The upper code will sample (one of the) Joystick(s) at the rate of 10 Hz, allowing you to test buttons, axes, etc. Note that the first "Initialize Joystick" function takes a parameter (default = 0) that corresponds to the Joystick Index you discovered by examining the Joystick Info array (see previous paragraph) -- if your Joystick, for example, seems to be at Index = 4, wire a "4" into the Initialize Joystick function.
BS -
Groupwise address book sync with Nextel Direct connect #'s for 8350i
Is there a way to sync address books for groupwise and 8350i to included the nextel direct connect information?
Thanks
Solved!
Go to Solution.Mapping solves the problem. Groupwise has no corresponding field for "Direct Connect". For ease of data entry, I mapped the Direct Connect field in my 8350i with the pager field in my groupwise address books. The BB desktop manager now syncs the nextel direct connect #'s.
The steps are:
In BB desk top manager, select Sync Configuration; address book; advanced; Field Mapping (at bottom of list). Map an unused field in the GW address book with the direct connect field in the 8350i.
I assumethis would also work with outlook and others. -
Phones with PTT and Nextel Direct Connect (USA) su...
Hi !
I am looking to for Nokia phone that supports Push to talk option and supports Nextel Direct Connect network(USA). I could not find any information on the web and it turns out that some phones can even be upgraded with PTT.
Thanks and Happy new Year !Mapping solves the problem. Groupwise has no corresponding field for "Direct Connect". For ease of data entry, I mapped the Direct Connect field in my 8350i with the pager field in my groupwise address books. The BB desktop manager now syncs the nextel direct connect #'s.
The steps are:
In BB desk top manager, select Sync Configuration; address book; advanced; Field Mapping (at bottom of list). Map an unused field in the GW address book with the direct connect field in the 8350i.
I assumethis would also work with outlook and others. -
hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus
Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support. -
WRE54G doesn't work with PS3...
Hello,
I bought yesterday the range expander WRE54G because I would like to expand my WiFi singal and make it accesible to my PS3.
I configured de range expander and it works fine with all my electronic gadgets with WiFi, but it doesn't work with PS3. My PS3 is always contecting and disconecting... And, curiously, when i connect PS3 directly to my router, using wifi too, it works fine...
What can i do to solve this problem? I only bought it to use with PS3.
i put the same SSID and chanel of the router wifi to the range expander... I think it must be in that way, no?
Thanks in advanced.You have correctly setup the WRE54G if you have same SSID, wireless channel and wireless security on this device and the router. The range expander will reduce the wireless connection speed by Half. So may be your connection drops because of lower connection speed.
-
Wired connection doesn't work if cable is not plugged in at boot time
Hey all,
I started using arch a few days ago and I simply love it, but I have a problem. The wired connection doesn't work if the cable is not plugged in at boot time, or if it was plugged in at boot time, then plugged out and in again. Switching it off and on again via the gui has the same effect. I am using NetworkManager with dhcpcd, NetworkManager is started via systemd, dhcpcd is not, I let NetworkManager do that. When I started investigating this problem there were some remnants of netctl, but now NetworkManager is the only networking-related service started at boot time. When the cable is plugged back in, NM-applet shows that it's connected, and an IP address is assigned, but the connection doesn't work.
Here's some information regarding the system:
It's a lenovo G50-70 laptop, it uses the r8169 driver for ethernet. (I dualboot it with windows 8.1, but arch is default and all this stuff happens also if i only use arch)
The router is a Linksys EA2700/N600
journalctl -u NetworkManager
aug 26 19:14:33 arch_daboka NetworkManager[527]: <info> NetworkManager (version 0.9.10.1) is starting...
aug 26 19:14:33 arch_daboka NetworkManager[527]: <info> Read config: /etc/NetworkManager/NetworkManager.conf
aug 26 19:14:33 arch_daboka NetworkManager[527]: <info> WEXT support is enabled
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> Loaded plugin keyfile: (c) 2007 - 2013 Red Hat, Inc. To report bugs please use the NetworkMan
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> new connection /etc/NetworkManager/system-connections/Bokros
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> new connection /etc/NetworkManager/system-connections/1. vezetékes kapcsolat
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> new connection /etc/NetworkManager/system-connections/UPC1838142
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> monitoring kernel firmware directory '/usr/lib/firmware'.
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> rfkill0: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.3/0000:02:00.0/iee
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> rfkill1: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC20
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> WiFi hardware radio set enabled
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> WWAN hardware radio set enabled
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> Loaded device plugin: /usr/lib/NetworkManager/libnm-device-plugin-wifi.so
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> Loaded device plugin: /usr/lib/NetworkManager/libnm-device-plugin-wwan.so
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> Loaded device plugin: /usr/lib/NetworkManager/libnm-device-plugin-adsl.so
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> Loaded device plugin: /usr/lib/NetworkManager/libnm-device-plugin-bluetooth.so
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> WiFi enabled by radio killswitch; enabled by state file
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> WWAN enabled by radio killswitch; enabled by state file
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> WiMAX enabled by radio killswitch; enabled by state file
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> Networking is enabled by state file
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (lo): link connected
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (lo): carrier is ON
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (lo): new Generic device (driver: 'unknown' ifindex: 1)
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (lo): exported as /org/freedesktop/NetworkManager/Devices/0
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (enp1s0): carrier is OFF
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (enp1s0): new Ethernet device (driver: 'r8169' ifindex: 2)
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (enp1s0): exported as /org/freedesktop/NetworkManager/Devices/1
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
aug 26 19:14:36 arch_daboka systemd[1]: Started Network Manager.
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (enp1s0): preparing device
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): using nl80211 for WiFi device control
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): driver supports Access Point (AP) mode
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): new 802.11 WiFi device (driver: 'ath9k' ifindex: 3)
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): exported as /org/freedesktop/NetworkManager/Devices/2
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): preparing device
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> use BlueZ version 5
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> wpa_supplicant started
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0) supports 4 scan SSIDs
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: starting -> ready
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: ready -> disconnected
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0) supports 4 scan SSIDs
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: disconnected -> inactive
aug 26 19:14:42 arch_daboka NetworkManager[527]: <info> startup complete
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Auto-activating connection 'Bokros'.
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) starting connection 'Bokros'
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 1 of 5 (Device Prepare) scheduled...
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 1 of 5 (Device Prepare) started...
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTING
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 2 of 5 (Device Configure) scheduled...
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 1 of 5 (Device Prepare) complete.
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 2 of 5 (Device Configure) starting...
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: prepare -> config (reason 'none') [40 50 0]
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0/wireless): connection 'Bokros' has security, and secrets exist. No new sec
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Config: added 'ssid' value 'Bokros'
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Config: added 'scan_ssid' value '1'
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Config: added 'psk' value '<omitted>'
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 2 of 5 (Device Configure) complete.
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Config: set interface ap_scan to 1
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: inactive -> authenticating
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: authenticating -> associated
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: associated -> 4-way handshake
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: 4-way handshake -> completed
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireles
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) scheduled.
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) started...
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: config -> ip-config (reason 'none') [50 70 0]
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Beginning DHCPv4 transaction (timeout in 45 seconds)
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> dhcpcd started with pid 3599
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) complete.
aug 26 19:15:01 arch_daboka dhcpcd[3599]: version 6.4.3 starting
aug 26 19:15:01 arch_daboka NetworkManager[527]: dhcpcd[3599]: version 6.4.3 starting
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> (wlp2s0): DHCPv4 state changed nbi -> preinit
aug 26 19:15:01 arch_daboka dhcpcd[3599]: DUID 00:01:00:01:1b:7c:0d:d6:28:d2:44:7f:89:66
aug 26 19:15:01 arch_daboka dhcpcd[3599]: wlp2s0: IAID 65:59:c9:b5
aug 26 19:15:01 arch_daboka NetworkManager[527]: dhcpcd[3599]: DUID 00:01:00:01:1b:7c:0d:d6:28:d2:44:7f:89:66
aug 26 19:15:01 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: IAID 65:59:c9:b5
aug 26 19:15:01 arch_daboka dhcpcd[3599]: wlp2s0: soliciting an IPv6 router
aug 26 19:15:01 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: soliciting an IPv6 router
aug 26 19:15:02 arch_daboka dhcpcd[3599]: wlp2s0: rebinding lease of 192.168.1.137
aug 26 19:15:02 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: rebinding lease of 192.168.1.137
aug 26 19:15:07 arch_daboka dhcpcd[3599]: wlp2s0: leased 192.168.1.137 for 86400 seconds
aug 26 19:15:07 arch_daboka dhcpcd[3599]: wlp2s0: adding route to 192.168.1.0/24
aug 26 19:15:07 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: leased 192.168.1.137 for 86400 seconds
aug 26 19:15:07 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: adding route to 192.168.1.0/24
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> (wlp2s0): DHCPv4 state changed preinit -> reboot
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> address 192.168.1.137
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> plen 24 (255.255.255.0)
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> gateway 192.168.1.1
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> server identifier 192.168.1.1
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> lease time 86400
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> hostname 'arch_daboka'
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> nameserver '192.168.1.1'
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> domain name 'chello.hu'
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 5 of 5 (IPv4 Commit) started...
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: ip-config -> ip-check (reason 'none') [70 80 0]
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 5 of 5 (IPv4 Commit) complete.
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: ip-check -> secondaries (reason 'none') [80 90 0]
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: secondaries -> activated (reason 'none') [90 100 0]
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTED_LOCAL
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTED_GLOBAL
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Policy set 'Bokros' (wlp2s0) as default for IPv4 routing and DNS.
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Writing DNS information to /usr/bin/resolvconf
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) successful, device activated.
aug 26 19:15:14 arch_daboka dhcpcd[3599]: wlp2s0: no IPv6 Routers available
aug 26 19:15:14 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: no IPv6 Routers available
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): link connected
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 4
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Auto-activating connection '1. vezetékes kapcsolat'.
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) starting connection '1. vezetékes kapcsolat'
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 1 of 5 (Device Prepare) scheduled...
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 1 of 5 (Device Prepare) started...
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 2 of 5 (Device Configure) scheduled...
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 1 of 5 (Device Prepare) complete.
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 2 of 5 (Device Configure) starting...
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: prepare -> config (reason 'none') [40 50 0]
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 2 of 5 (Device Configure) successful.
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 3 of 5 (IP Configure Start) scheduled.
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 2 of 5 (Device Configure) complete.
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 3 of 5 (IP Configure Start) started...
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: config -> ip-config (reason 'none') [50 70 0]
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Beginning DHCPv4 transaction (timeout in 45 seconds)
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> dhcpcd started with pid 4322
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 3 of 5 (IP Configure Start) complete.
aug 26 19:15:34 arch_daboka dhcpcd[4322]: version 6.4.3 starting
aug 26 19:15:34 arch_daboka dhcpcd[4322]: DUID 00:01:00:01:1b:7c:0d:d6:28:d2:44:7f:89:66
aug 26 19:15:34 arch_daboka dhcpcd[4322]: enp1s0: IAID 44:7f:89:66
aug 26 19:15:34 arch_daboka NetworkManager[527]: dhcpcd[4322]: version 6.4.3 starting
aug 26 19:15:34 arch_daboka NetworkManager[527]: dhcpcd[4322]: DUID 00:01:00:01:1b:7c:0d:d6:28:d2:44:7f:89:66
aug 26 19:15:34 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: IAID 44:7f:89:66
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): DHCPv4 state changed nbi -> preinit
aug 26 19:15:34 arch_daboka dhcpcd[4322]: enp1s0: soliciting an IPv6 router
aug 26 19:15:34 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: soliciting an IPv6 router
aug 26 19:15:34 arch_daboka dhcpcd[4322]: enp1s0: rebinding lease of 192.168.1.138
aug 26 19:15:34 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: rebinding lease of 192.168.1.138
aug 26 19:15:39 arch_daboka dhcpcd[4322]: enp1s0: leased 192.168.1.138 for 86400 seconds
aug 26 19:15:39 arch_daboka dhcpcd[4322]: enp1s0: adding route to 192.168.1.0/24
aug 26 19:15:39 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: leased 192.168.1.138 for 86400 seconds
aug 26 19:15:39 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: adding route to 192.168.1.0/24
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): DHCPv4 state changed preinit -> reboot
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> address 192.168.1.138
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> plen 24 (255.255.255.0)
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> gateway 192.168.1.1
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> server identifier 192.168.1.1
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> lease time 86400
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> hostname 'arch_daboka'
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> nameserver '192.168.1.1'
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> domain name 'chello.hu'
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 5 of 5 (IPv4 Commit) started...
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: ip-config -> ip-check (reason 'none') [70 80 0]
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 5 of 5 (IPv4 Commit) complete.
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: ip-check -> secondaries (reason 'none') [80 90 0]
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: secondaries -> activated (reason 'none') [90 100 0]
aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTED_LOCAL
aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTED_GLOBAL
aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> Policy set '1. vezetékes kapcsolat' (enp1s0) as default for IPv4 routing and DNS.
aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> Writing DNS information to /usr/bin/resolvconf
aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) successful, device activated.
aug 26 19:15:47 arch_daboka dhcpcd[4322]: enp1s0: no IPv6 Routers available
aug 26 19:15:47 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: no IPv6 Routers available
ping -c 10 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=4.38 ms
64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=2.79 ms
64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=4.89 ms
64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=5.30 ms
64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=1.59 ms
64 bytes from 192.168.1.1: icmp_seq=6 ttl=64 time=1.61 ms
64 bytes from 192.168.1.1: icmp_seq=7 ttl=64 time=4.37 ms
64 bytes from 192.168.1.1: icmp_seq=8 ttl=64 time=2.40 ms
64 bytes from 192.168.1.1: icmp_seq=9 ttl=64 time=6.47 ms
--- 192.168.1.1 ping statistics ---
10 packets transmitted, 9 received, 10% packet loss, time 9014ms
rtt min/avg/max/mdev = 1.599/3.759/6.471/1.627 ms
ping -c 100 8.8.8.8 - it's not completely disconnected, but it's always 8 packets at once that are received
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=20 ttl=46 time=41.7 ms
64 bytes from 8.8.8.8: icmp_seq=21 ttl=46 time=40.0 ms
64 bytes from 8.8.8.8: icmp_seq=22 ttl=46 time=38.8 ms
64 bytes from 8.8.8.8: icmp_seq=23 ttl=46 time=39.3 ms
64 bytes from 8.8.8.8: icmp_seq=24 ttl=46 time=41.8 ms
64 bytes from 8.8.8.8: icmp_seq=25 ttl=46 time=38.4 ms
64 bytes from 8.8.8.8: icmp_seq=26 ttl=46 time=38.4 ms
64 bytes from 8.8.8.8: icmp_seq=27 ttl=46 time=38.0 ms
64 bytes from 8.8.8.8: icmp_seq=56 ttl=46 time=43.4 ms
64 bytes from 8.8.8.8: icmp_seq=57 ttl=46 time=49.8 ms
64 bytes from 8.8.8.8: icmp_seq=58 ttl=46 time=40.2 ms
64 bytes from 8.8.8.8: icmp_seq=59 ttl=46 time=44.3 ms
64 bytes from 8.8.8.8: icmp_seq=60 ttl=46 time=38.5 ms
64 bytes from 8.8.8.8: icmp_seq=61 ttl=46 time=43.4 ms
64 bytes from 8.8.8.8: icmp_seq=62 ttl=46 time=39.2 ms
64 bytes from 8.8.8.8: icmp_seq=63 ttl=46 time=40.5 ms
64 bytes from 8.8.8.8: icmp_seq=92 ttl=46 time=38.3 ms
64 bytes from 8.8.8.8: icmp_seq=93 ttl=46 time=43.7 ms
64 bytes from 8.8.8.8: icmp_seq=94 ttl=46 time=42.3 ms
64 bytes from 8.8.8.8: icmp_seq=95 ttl=46 time=46.6 ms
64 bytes from 8.8.8.8: icmp_seq=96 ttl=46 time=44.9 ms
64 bytes from 8.8.8.8: icmp_seq=97 ttl=46 time=42.9 ms
64 bytes from 8.8.8.8: icmp_seq=98 ttl=46 time=41.7 ms
64 bytes from 8.8.8.8: icmp_seq=99 ttl=46 time=37.8 ms
--- 8.8.8.8 ping statistics ---
100 packets transmitted, 24 received, 76% packet loss, time 99062ms
rtt min/avg/max/mdev = 37.886/41.455/49.829/3.000 ms
cat /etc/dhcpcd.conf - I tried clientid instead of duid and disabling IPv6, but neither of those helped.
# A sample configuration for dhcpcd.
# See dhcpcd.conf(5) for details.
# Inform the DHCP server of our hostname for DDNS.
hostname
# Use the hardware address of the interface for the Client ID.
#clientid
# or
# Use the same DUID + IAID as set in DHCPv6 for DHCPv4 ClientID as per RFC4361.
duid
# Persist interface configuration when dhcpcd exits.
persistent
# Rapid commit support.
# Safe to enable by default because it requires the equivalent option set
# on the server to actually work.
option rapid_commit
# A list of options to request from the DHCP server.
option domain_name_servers, domain_name, domain_search, host_name
option classless_static_routes
# Most distributions have NTP support.
option ntp_servers
# Respect the network MTU.
# Some interface drivers reset when changing the MTU so disabled by default.
#option interface_mtu
# A ServerID is required by RFC2131.
require dhcp_server_identifier
# Generate Stable Private IPv6 Addresses instead of hardware based ones
slaac private
# A hook script is provided to lookup the hostname if not set by the DHCP
# server, but it should not be run by default.
nohook lookup-hostname
#noipv4ll
#Disable IPv6
#noipv6rs
#noipv6
cat /etc/NetworkManager/NetworkManager.conf
[main]
plugins=keyfile
dhcp=dhcpcd
## Set static hostname
#[keyfile]
#hostname=foobar
## HTTP-based connectivity check
#[connectivity]
#uri=http://nmcheck.gnome.org/check_network_status.txt
I couldn't find anything else to append, but if there are other log or conf files or anything else, which would help solving the problem, I should put here, please tell me.Try to use dhclient perhaps? Might I also suggest letting systemd deal with the dhcp issue and not NM. That may seem incongruous but it is possible NM is mis-handling the dhcp hand-off to the network card. I'm no guru but I got thinking about this when I saw this in your output:
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: ip-check -> secondaries (reason 'none') [80 90 0]
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: secondaries -> activated (reason 'none') [90 100 0]
aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTED_LOCAL
It is very possible that I'm mis-interpreting this information so please take it with a boulder of salt. -
TS1253 I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?
I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?
What have you tried?
You are going to get nowhere quick with the 6.1 utility in Mountain Lion if this is the only OS you have available.
Look up how to install 5.6 utility under ML. At least then you can see printers. That is assuming you are trying to use USB.
Has this worked ever on Mountain Lion? Did you download the drivers for that printer for ML?
Plug it into a computer directly.. does it work? If it doesn't work locally it sure will not work via the network. -
My i pod nano first generation doesn't work with windows 8
My i pod nano first generation doesn't work with windows 8
Howdy yvesmd,
Thanks for using the Apple Support Communities.
If your iPod nano is not being recognized in iTunes on your Windows computer, then I'd like you to please follow the directions in the link below.
Apple - Support - iPod - iPod nano Troubleshooting
Cheers,
Alex H. -
Trying to set up Apple TV with ATT Uverse. I get errors when trying to enter my WiFi password. One site says that Apple TV doesn't work with Uverse because it uses WPA for encryption. If true, does that mean Uverse subscribers cannot use Apple TV?
Spurs63 wrote:
does that mean Uverse subscribers cannot use Apple TV?
No, that's a rather silly conclusion.
There are two options:
stop using the crappy router provided by the ISP.
Physically connect the ATV to the router via Ethernet. -
Media Encoder CS4 doesn't work with Premiere (pic related)
Oh hai!
I just got Adobe Master Collection CS4 and my Media Encoder doesn't work with Premiere CS4. When I try to export the file, Encoder starts normally. Then I click "Start queue" and Encoder starts loading. Loading takes almost five minutes, which is a long time, because my project is very simple. After that nothing happens, just a warning sign appears. When I click it open, some kind of log file open and it says:
Encoding failed
Could not read from the source. Please check if it has moved or been deleted.
And I didn't deleted anything. So what does that mean? Why that "Source Name's" path is different than my project files path? Can this problem relate that somehow?
I have also another problem with Premiere CS4, maybe there's a link between these two problems. I can't get Premiere projects linked to open in Premiere CS4. When I right-click the project icon, and click “Open with…”, I can't find Premiere from the list. When I click "Browse", I can find Premiere.exe from my computer, but if i doubel-clicked it, nothing happens. It won't appear to the list or anywhere else. Or have I missed something? So now the project files are linked to open in After Effects. Of course I can open projects from Premiere, but how do I get them open straight from file?
I have long experience using Adobe Premiere and this is the first time I got this kind of problems. I have also downloaded new updates for Premiere and Encoder, this didn't help. Does that matter, that I didn't installed Premiere in C-drive? However it's in my computers internal drive, I have divided my hard drive for five parts, one part contains all of my softwares. My scratch disks are in different hard drive (external), does that matter? I tried different location, but that didn't help.
Please help, I can't do any video editing, because of this problem. And sorry for my english, ask if you didn't understand something. =)Hello, this is terrible problem, which i found in CS 6 softwares ...
solution i found only working, is uninstall and reinstall full package.. but it is not all,
you need to do BRAND NEW admin account in windows, and install it there.
that means, i could not export after repair from encoder in my original account never more (!!) .. this is really terrible way how to repair this issue, because :
1.by reinstalling of software, client WASTE HIS TIME
2.by necessity to begin work in another windows profile you again WASTE YOUR TIME because of learning and migrating all other profile modifications, which i see really unaccpetable. Adobe means, this solution of repair is ok, and they did not do till today any steps of creating some "clever" solution.
I ask everybody, who will meet this issue in future, guys, please, complain about this situation, give "BUG Report" to them, and write "feature request" to them , in the way of creating some repair tool, which check actual "broken" connections between encoder and premiere, which refuses to "take material" from it and encode, and REPAIR it automatically..
I am not IT, but ..does it seems so hard to create this ? Adobe IT developers should know their systems, and should create such utility tool really easy.
History of this problem and detailed description, HOW i did "repair" this. With wasting of app 2,5 days of my working time :
1. after repairing "error 5" problem , i solved it by reinstalling the suite from the new admin user profile (profile B) .
I continued my work on my normal working windows profile . (profile A)
Every cooperation (AE+Pr, export media via "queue" to Encoder) was working fine . . .
2. suddenly it stop working (without knowing any possible reason - i did not do installations )
and showed in error export log file :
"Could not read from the source. Please check if it has moved or been deleted."
3.repair via procedure(procedure "a"):
i did this procedure on the profile B (profile from last time installation of repairing problem error 5)
I did these steps :
a-uninstall master coll suite
b-i used Adobe cleaner tool (remove ALL)
c-removed raw directories in locations
•C:\Program Files\Adobe
•C:\Program Files(x86)\Adobe
•C:\Program Files\Common Files\Adobe
•C:\Program Files(x86)\Common Files\Adobe
•C:\ProgramData\Adobe
d-removed these links from registry file
•HKEY_LOCAL_MACHINE\SOFTWARE\Adobe
•HKEY_CURRENT_USER\Software\Adobe
•HKEY_LOCAL_MACH INE\SOFTWARE\Wow6432Node\Adobe
•HKEY_CURRENT_USER \Software\Wow6432Node\Adobe
e-restarted the PC
f- newly installed the Master Coll CS6
g-update the software
result of repair of "3" : problem still exists
4.Ok i find out after coordination with support, it should have been created ANOTHER NEW admin account.
4a:so i did the same procedure (uninstalling) in profile B
4b: and then i created brand new admin profile (profile C)for INSTALLATION of software
4c: restarted the pc (and did not updated it yet)
result :
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile C) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile B) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile A) : export DOES NOT WORK ! ! !
(in profile A, is possible to export some raw video material in encoder which is imported to it via "drag and drop)
problem i see:, i have my basic profile A, which i am interested to work, because of all my directory modifications are in there..
this issue should be some "broken" connections between encoder and premiere, which refuses to "take material" from it and encode.
what i expect :
to get from Adobe some repair tool, which automatically checks these connections and repair if necessary, without necessity of founding the new profile and reinstallation of whole software.. this is madness !
what i do NOT expect from Adobe:
to get from Adobe advice of kind : you have to reinstall full software in new admin profile. sorry , we do not know the solution, because we do not know, how do behave our software.
Maybe you are looking for
-
New interal Hard drive and Lion
I have a Mac Pro early 2008 which is working just fine except that the original hard drive is starting to show it's age. To mitigate the potential problem I have a new clean,empty internal hard drive and wonder if installing Lion on it would be a wis
-
Initial screen of a report group?
Hi gurus, There are 14 report painter in the report group. How to improve its performance? I am not really familir with this tool.The tutorial doc seems won't help. Could anyone explain to me how to modify the initial screen of a report group? I want
-
Reloaded Windows now cant access my iPod data
I had to reload the Windows Vista and now I can not do anything with my apps on the Touch. What do I do so I can get my apps back in the working order? I have tried to sync but I get a warning that tells me I will lose anything that is not listed in
-
Safari not functioning in Mavericks,
Freezes, can't open tapes, "safari tab" preferences tab doesn't work, blank pages, shut's off, etc Help!!!!
-
Current install CD can no longer install Arch?
After a lot of distro hopping, I've come back to Arch, but I have met a rude surprise: the install CD doesn't seem to work any more. If I try to do an FTP install, then on displaying the available package groups, the installer displays the string "Er