845 PE-Max "NEW" Bios Flash "does it really fix the temp readings?"

So MSI has been having problems with there Temp readings on there boards. So I was surprised to see that they just released a bios update to correct this issue. Of course I couldn't wait to download and flash the bios and see what effect it had. Everything went well, I popped into windows and (I'm testing Intel's stock HSF currently) and my temps dropped drastically????? Now this can't be correct either...
Motherboard: 32c
CPU: 29c
Case 23c
Now remember this is with the retail P4 2.53 HSF. With the new bios flash it shows a cooler temp than my Spark 7. And the Intel is only running at 2400RPM. Before the bios flash with the Intel HSF:
Motherboard: 33c
CPU: 40c
Case 23c

Well ran another test last night. Ran a CPU Burn-In test for 30 Minutes and the temp only hit 45c during the test. Obviously the new BIOS is incorrect. I find it impossible that the retail HSF on my P4 2.53GHz can keep it below 50c under max load. My Tt Spark 7 with Artic Silver II only kept it at 37c idle. I'm reading 28c Idle now using the retail HSF.
MSI - ??????????????????????????

Similar Messages

  • Does bios 1.08 really fix the CPU temp?

    I just plopped in a shiny new 3700+, and I noticed that unlike my old 3200+, my temps now don't read correctly.  My old 3200+ seemed to read accurately @39c.  Now with my new 3700+ it reads 63c.  I have confirmed that it is not running anywhere near that high, and seems very close to my old 3200+.  
    I'm presently running bios 1.06 and everything runs great.  On previous motherboards I've had, new bios'es  come out claiming to fix CPU temp readings, but my experance has always been that I've not seen the fix claimed after flashing.
    Has anyone running a 3700+ flashed to bios 1.08 actually seen the temp reading fixed?  I can't understand why my 3200+ reads right on but yet my 3700+ is so far off.
    Thanks

    Umm..ok, guess I will just hang with 1.06  
    I've always been of the opinion, that if your attempting to fix something, then flash.  If a new flash doesn't fix the thing I'm trying to fix, then I skip it.
    Thanks for the feedback.

  • "Add New Tab" button does not exist in the Window -Customize Toolbar, and not on my Navigator toolbar. Where can I find one to put on my Navigator toolbar, please?

    I see "Add New Window" but..."Add New Tab" button does not exist in the Window -Customize Toolbar any longer, and not on my Navigator toolbar. Where can I find one to put on my Navigator toolbar, please?
    Thanks

    It's the "+" on the Tab bar. You can move it to the Navigation Toolbar if you prefer. When you start Customize, the + moves to the far right end of the Tab bar. You can drag it where you want (see attached image).
    Any luck?

  • Looking from the many users complaining, I am a bit scared whether should i proceed update to ios 8.0.2 to my ipad 2 or not? Does any one know news whether issues will be really fixed or should i stay on version 7 only?

    looking from the many users complaining, I am a bit scared whether should i proceed update to ios 8.0.2 to my ipad 2 or not? Does any one know news whether issues will be really fixed or should i stay on version 7 only?  Can appl,e has any plan to migrate their Ipad 2 customers to use or take new Ipad with some exchange offers ?
    please I expect a quick responce to my queries. I am waiting eagerly what to do now?

    Ipad Air dead after installing IOS 8.0.2
    I have just downloaded and installed this version of IOS on my Ipad Air and it is DEAD.
    It won't start up.
    When I connect my Ipad to my MacbookPro, Itunes tells me the following:
    "iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes."
    What now? restore? try to remove 8.0.2?
    what a misery!!

  • Ggrrrrr, is there any that bios that fixes the temp issue? [solved]..spoke too soon [NOT SOLVED]

    ive tried
    1.1
    1.2
    1.3
    1.42
    come on msi, give me a fighting chance :(

    Here is the last thing I received from MSI tech support.  I'll give them this much, they are much more responsive than VIA or AOpen ever were when I first got my flakey MVP3 board...lol.  I hope they can figure this problem out!
    Quote
    So far in our own testing, we have not found any High CPU Temperature issues.
    We have gone through the threads you have provided to us and we will co-work with AMD to see if anything needs to be updated from our side with the New Castle Core.
    Once again, MSI appreciates all the findings/reports you have provided to us and we will update you once there is any findings becomes available.
    Sincerely,
    Technical Support Division
    MSI Computer Corp.
    http://www.msicomputer.com
    MSI - Beyond Expectations!  
    1-626-913-0828
    1-626-581-7721 Fax
    Due to high volume of cases daily, we may not be able to answer question promptly. Please kindly provide your name, phone number, model number, state in which you are calling from, a brief description of your problems, and we will try to reply your issue as promptly as possible. Thanks
    The information transmitted is intended only for the person or entity to which it is addressed and contained confidential and privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient are prohibited. If you receive this in error, please contact the sender and delete the material from any computer.
    -----Original Message-----
    From: my email deleted
    Sent: Friday, August 06, 2004 8:51 AM
    To: [email protected]
    Subject: RE: 3 -- Customer Problem Description Form
    I know you guys think you fixed the Newcastle temperature problem.  But there are still a LOT of us out here who are having trouble, using latest BIOS.  People are reporting this all over the MSI forums.  The behavior is as follows, flashing the BIOS might help initially, but soon after the temp shoots way back up.
    Please see the following threads:
    Temps and BIOS 1.42
    ggrrrrr, is there any that bios that fixes the temp issue? [solved]..spoke too soon [NOT SOLVED]
    Possible fix for CPU temp problem found.
    The same old problem with temperatures (K8N Neo Platinum)
    K8N Neo Temps :(

  • Does Yosemite Mail fix the Outlook font display issue?

    Does Yosemite Mail fix the Outlook font display issue?

    This problem has been going on for years and seems to be related to converting pixels to points, or points to pies between operating systems such as Apple / Microsoft. See The age-old outgoing mail font problem
    Its a complete pain and beyond me why something SO simple as having the text display correctly between operating systems has not been fixed, especially in this era of technology. Apple should really focus on this and I am amazed that after waiting 4 years since the release of Microsoft Outlook 2011 for the new Microsoft Outlook 2015 that Microsoft have also not fixed this. Its just beyond comprehension and effects both the reputation of people sending emails using these platforms and those organisations that produce the software, and chose to ignore the problem without fixing it. The industry leaders should do just that and lead the way by fixing this basic problem, not burying their heads in the sand and hoping goes away.
    Recently I have had to resort to typing the required email text in something like the TextEdit app, copying and pasting it into the Outlook mail body. Its not great, adding extra steps for every email sent and I use my Mac for business so there are many daily email being generated. At least doing it this way all the text is consistent when sent although I'm sure there could be a workflow generated in Automator or an AppleScript that would reduce the steps.

  • Does 1.9 fix the HDMI handshake issue ?

    does 1.9 fix the HDMI handshake issue experienced by users with the Newer 7 series set top boxes? Frankly, that is my biggest desire for this new software.

    In general there ae fewer handshake issues with the 7xxx boxes
    1.9 does include some fixes for some handshake issues.  For motorola boxes it includes new firmware from Motorola as well as Verizon's new IMG.

  • Is Battery Doctor by Beijing Kingsoft Good for Iphone 4s? Does It Really Help the Battery ? Thanku! Hope For Your Reply

    Is Battery Doctor by Beijing Kingsoft Good for Iphone 4s? Does It Really Help the Battery ? Thanku! Hope For Your Reply

    Doesn't do anything or provide any info that you can't do yourself. This is all you need to know about your battery:
    http://www.apple.com/batteries/iphone.html

  • HT6065 Does this update fix the Facetime HD iSight Camera issue?

    Does this update fix the Facetime HD iSight Camera issue?

    Looking at its release notes, it does not specify a fix for that problem. However, you should install this update, as this fixes other bugs and improve performance. Open  > Software Update, and OS X 10.9.1 will show up

  • Add new tab button does not appear at the right of the previous tab

    Just upgraded to Firefox 4 and the plus sign (T) for a new tab does not appear on the right of the previous tab as it had in earlier versions. I thought it was there briefly after I upgraded but it's not there anymore. How do I get it back? I did download the extension "new tab at the end" but that didn't help....

    That button should be available by default. However, if you use tab related Add-ons it may not show up as expected. You can add it back by right clicking on the navigation bar, clicking Customize, then drag the New Tab icon to the right end of tab bar.
    If that doesn't work, please try starting Firefox in Safemode to see if add-ons are indeed interfering.

  • Created new data source, does not appear in the list

    Hi I created a new data source using information provided in http://otn.oracle.com/products/reports/apis/pdstutorial/textPDS/PDS_1.html. But the new data source I created does not appear in the wizard. Could some body give me a clue? Can somebody point me to more detailed documentation on how to integrate a new data source into Reports Builder?
    thanks
    Srinivas

    Hi
    I desperately need help to troubleshoot why my data source is not appearing in the list eventhough I feel I have done things as per the tutorial. From reading the tutotial I am not clear -
    - If specifying an icon is mandatory. If I don't specify an icon my datasource should still appear right?..without an icon?
    - It is mandatory to implement the editor. I have hard coded things because I don't foresee any interaction by a user with the data source. There is just one column which WILL always appear if this DS is chosen.
    - Finally in the integration instructions(http://otn.oracle.com/products/reports/apis/pdstutorial/textPDS/PDS_5.html) they mention that the classes have to be compiled with "report build" , is that a tool?
    thanks
    Srinivas

  • HT201269 my new iphone 5c does not give me the option to restore from icloud backup

    I am trying to transfer the data from my old phone to my new one and my new 5c does not give me the option to restore from icloud backup
    So now what do I do

    Settings>General>Reset>Erase all Content and Settings.
    Once this is done, it will ask you to set your phone up again.  You can choose to restore from your iCloud backup.

  • Has anyone verified the temp readings as of the 3.7 bios?

    Just flashed my bios to 3.7.  3.6 reported 38- 43°C idle, 60-64°C load.  3.7 show 32-36°C idle to 55°C load.  Temps look nice, but how accurate are they?  Has anyone used a probe to verify the accuracy of the temps?  I wonder how close the readings are to the real deal.

    We have legacy code running on legacy platforms that cannot be just retired unfortunately. It would be great if we could simply eliminate it overnight. The following is the code that I used to gauge whether the JVM has the new DST rule.
    int year = 2007;
    int month =10;
    int dateOfMonth = 1;
    int hour = 1;
    int minute = 0;
    GregorianCalendar gc = new GregorianCalendar(year, month, dateOfMonth, hour, minute);
    Date date = gc.getTime();
    System.out.println("displayed name=" + timeZone.getDisplayName() +
    " dst?=" + timeZone.useDaylightTime() +
    " date=" + date.toString() +
    " in dst?=" + timeZone.inDaylightTime(date));
    Alan Lei

  • H.264 videos washed out colours/gamma bug. Does this really fix it?

    Yea, that old chestnut. Having come up with this topic: http://discussions.apple.com/thread.jspa?threadID=1358418&start=0&tstart=0 where someone claimed to fix the problem by using the third party x264encoder for Mac and setting nclc atom to 6-1-6 and making sure the gamma 2.2 setting was unchecked. Although no one else apparently confirmed his solution worked and the topic eventually died.
    I later found however after following a link someone posted this article: http://byteful.com/blog/2010/07/how-to-fix-the-h264-gamma-brightness-bug-in-quic ktime/
    In it he apparently recommends the same course of action except he (judging by the screen shot) left it at the default of no nclc atom but made sure the gamma 2.2 setting was checked. Some comments seem to confirm it works.
    The x264encoder is available for QuickTime from here: http://www.apple.com/downloads/macosx/video/x264encoder.html
    I cannot test it currently. But added to my problem is I usually do my encoding on Windows anyway, and I use Handbrake to do the encodes and I get the same issues. So can anyone with the issue test these methods and see if one or the other works?
    Either that or does anyone have another definitive fix for this problem?

    I don't know why I bother.

  • New bios version does not appear

    I have a k7n2 delta2 motherboard.I currently have bios version 11.4 {B4} My problem is that i flashed bios back to bersion 11.3 {B3).It seemed to  flash with no problem but when i  reboot it still says that my version is 11.4.Did I miss anything in the flash.Thanks for your help

    thanks wonkanoby, I have tried the /f.Hear is what happens, when i copy the file awf883d.exe and the file w6570nms.b30 it goes to another prompt than i type awf833d w6570nms.b30/f.It than goes to another screen with the logo award flash or bios or something like that.The screen has several symbols shown for various switches,i guess. It that goes to an a prompt. I have retyped awf833d w6570nms/f, it does not take and goes back to the a prompt.I have to retype but leave off the /f.It than goes to the flash and completes.But when i reboot it still shows the b40 version. Am i missing something on the second prompt.Thanks

Maybe you are looking for

  • On PDF fine black image appears dark grey

    We are using a mix of .TIF and .bmp images in black and type in black with a full background of Panotone Hexachrome Orange M. When we make a PDF of this the images and type appear dark grey on the PDF. When we print them they print out normal.

  • How to play swf file in flex builder3?

    Hi!!!!!! I have made a video player in Flex project ......In source of video display I have added the path of my swf file which is as follows: <mx:VideoDisplay id="player" source="C:\Documents and Settings\sachin\Desktop\absolute-values.swf" maintain

  • Files opened too big for screen

    Everytime i open a PDF i get that the document becomes bigger than my screen and i can't see the titlebar unless i find some edge and manage to resize it slightly then the title bar pops back.

  • Photoshop 'Save As' window cannot be re-sized??

    The window that pops-up when you try and do a 'save as' in Photoshop has gone full screen which is very annoying, and I cannot find a way to resize it. Dragging the corners do nothing., This may be a Windows issue rather than Photoshop, but it only h

  • Tab design very limited in Portal.

    Hi all, Do you find that the available tools for tab design is very limited in Portal ? The available options are only Active / Inactive tab images, background / font colors. I may need to turn to html portlet to create my custom tab layout and possi