[845 Series] SATA and overclocking

When i install an SATA drive it works fine until i over clock my processor. When i do the motherboard stops reconizing the hard drive. Anyone heard of anything like this before?

Assaf, is locking PCI bus will lock SATA bus too?
This is one of my concern too to upgrade my hdd to SATA. Typically, I overclock to FSB 250 and no one can confirm me if SATA lock is there in my board. My friend have Tyan board with 875 chipset and don't have sata lock, and some other good branded board out there don't have it too.

Similar Messages

[845 Series] 845PE and SATA DVD Burner, am I missing something here?

Hello all,
I seem to be finding a lot of people with issues regarding Plextor SATA drives, but I may just not have the right mobo to do what I want, maybe someone can help me figure this out.
Here are my basic specs:
845PE Max2 mobo
3 HDD(Don't think brand/capacity matters here)
1 DVD ROM drive
I have 2 of my HDD hooked up to my Primary IDE channel, and the DVD ROM hooked up to my Secondary IDE channel, and I have the third HDD hooked up to the extra IDE channel set up for RAID on this motherboard, but when I hook up the Plextor burner to my SATA channel 1, it doesn't show up ANYWHERE.
Here are my questions:
Can I use an optical SATA drive with this board, or will it only work with HDD's?
If I CAN use an optical drive, are the SATA channels hooked up somehow with the third IDE channel (In other words, is the fact that I have an IDE drive already on the third channel negating the SATA channels in the firsat place?)?
If the HDD IS what is causing the SATA drive not to show up, will moving it to the slave position on my Secondary IDE channel fix this, and if so, will my drive letter change?
I sure hope this isn't covered somewhere else in the forums, but I really didn't see MY exact problem anywhere.
I appreciate any and all help that you folks can provide!
Thanks!
Mike Wells

Your MOBO does not seem to be on the list as compatible with SATA Plextor optical drives. Of course, you could use a PCI card (SATA) in your machine.
Here are links to Plextor's MOBO compatability list:
Plextor 712SA - Serial-ATA (SATA) Compability List
http://www.plextor.com/english/support/media_712SA.htm
PX-716SA - Serial ATA Compatibility List
http://www.plextor.com/english/support/PX-716SA%20motherboard%20compatability%20listing.htm

Shopping for new HD: Difference between SATA and SATA II? / Compatibility?

I'm looking for a new HD to replace the original, now failing Maxtor drive in my G5 tower (1.8 Ghz dual processor, purchased in Aug. 2004), and have just about settled on the Western Digital Caviar SE16 series. It seems there are two types -- SATA and SATA II -- and I'm not sure about how to make a decision on which particular WD model to buy.
Will either type work in my machine? Or would the SATA II have potential compatibility problems? I read somewhere in these forums that someone with a G5 had bought an SATA II drive, and it wouldn't run with his system. (He said he had to reset some jumper switches to reduce the transfer rate of the drive [??], but now I'm told elsewhere that SATA drives don't have jumper switches.)
Kinda confusing trying to choose the right drive, so any help is appreciated.
Also, am wondering if there are any connectivity parts (power cable, SATA cable, screws, etc.) in particular that wouldn't come supplied with the drive. (I'll be ordering a retail drive, not OEM or refurb, so hoping it might come with everything I need.)
TIA,
Steve

Tom,
Thanks for the info. I don't see the 250GB w/ 16MB cache drive that I was looking for, but OWC has a very good price on the 500 GB drive. A few questions for clarification:
- Re: +"The later model SATA II drives often have a jumper to limit transfer rates to 150."+ -- Any tips on finding out if these jumper switches are present in a particular drive? OWC doesn't specify this, and this info seems to be generally hard to find.
- Re: +"...some are SATA I/II which are designed to work on both types."+ -- Same problem here... I'm not finding any info in the various drives' specs on this. To make this easier on myself, I'd rather get a drive that I don't have to mess with jumper switches, or at least be able to determine if a particular drive will present SATA I / II issues. Any additional info you (or others) can provide may be helpful.
- Will upgrading to a drive with 16MB cache give me an improvement in performance? And are there any compatibility issues with my particular G5? (I'm assuming a 16MB cache drive will work fine with my machine, and based on my reading they do provide a speed boost.)
Thanks for any info...
Steve

I own 2 ipods an ipod nano series 4 and ipod series 6 I want to store different tunmes on each ipod, but when I try to sync the series 4 with I tunes I get a message that says there is not enough space on my device. How do I achieve what I want?

O wn 2 iPod nanos series 4 and series 6 I want to sync different music on each iPod but I get the message when trying to sync the series 4 that there is too much data for the sync to take place. It seems both iPods have the same name, so I guess I have to rename one, how do I do this?
Or is there another solution
Any help appreiated
Wighill 13

It would be useful to you if they had a different name, but the computer knows they are different. Create separate sync playlists for each device and go to the Music tab when it is connected and specify which playlist should be used for the sync.

A magnet fell on my macbook "late 2007 series black" and it stopped working. When i start my macbook up it sits on the white screen. i tried inserting the snow leopard disk to do a clean install but the disk ejects and all i see is the pointer.help please

A magnet fell on my macbook "late 2007 series black" and it stopped working. When i start my macbook up it sits on the white screen. i tried inserting the snow leopard disk to do a clean install but the disk ejects and all i see is the pointer. i even bought a new hard drive to do the clean install but the same thing happens. Please Help

Your problem is not Boot Camp, in fact, is your optical drive. Win XP requires indeed sp2, but also the internal drive, does not work from external optical drive.
For other possible tricks, please use the appropriate Boot Camp forum, not here. Mac OS X may be installed from both external and internal optical drive and/or internal/external partition of a disk, any disk. Windows is not so generous.

I have purchased itunes tv series, movies and music and have transferred them onto an external hard drive and tried to play them on my tv on a media hub. The file will not load. Is there some form of blocking by itunes or another p[roblem and how d

I have purchased itunes tv series, movies and music and have transferred them onto an external hard drive and tried to play them on my tv on a media hub. The file will not load. Is there some form of blocking by itunes or another p[roblem and how do I fix it?

You can't fix it. iTunes bought content is DRM protected. so it can only be played on authorized devices. i.e devices associated with the apple Id used to purchase the content. Its copyright protection that the rights owners demand.
Circumventing it, is illegal in most countries, and as such cannot be discussed here. If you want to play the content you'll need to connect your computer directly to your TV, or use some other device you can authorize for iTunes content such as an iPad, iPhone , iPod touch or Apple Tv.

[Q] dual HD partitioning with sata and SSD

I have a computer that has a 500gb sata drive and a 16gb solid state drive. the computer only boots from the sata and I was wondering if I could partition the drives so that arch boots from the sata but the arch installation is on the solid state drive.

teateawhy wrote:
If you run
lsblk
are the SSD and the HDD shown as separate devices? Or is it a HDD that uses a SSD as its cache?
If HDD and SSD are separate devices, what you want is possible. Otherwise i can't say, probably not.
they are separate drives

I have installled PE12,I have registrated it (serie number) and I have made an Adobe- ID. (I can find there my registrated product). Still, when I want to start the program, there is a screen that indicates that i have "to registrate PE within 7 days" , W

I have installled PE12,I have registrated it (serie number) and I have made an Adobe- ID. (I can find there my registrated product). Still, when I want to start the program, there is a screen that indicates that i have "to registrate PE within 7 days" , When iI continuer (next sceen) there is a message that the proces can not proceed for "I need an internet commection" which I have!!!! When this problem does not disappear I have to contact Adobe ??....... So please can you help me. I am already many hours trying to get started :-(

CS2 is very old and reached its "end of life" a while back. So probably won't run on modern operating systems. If you can still run it, you'll need to uninstall what you have and re-install with the download link below to activate it.
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Nancy O.

Hi, can someone help me how can i connected my multimeter to my pc with rs232, because my computer can´t recognize the device, i mean the multimeter, is a multimeter keithley serie 2400, and i already downloaded all the drivers for labview even the VISA

hi, can someone help me how can i connected my multimeter to my pc with rs232, because my computer can´t recognize the device, i mean the multimeter, is a multimeter keithley serie 2400, and i already downloaded all the drivers for labview even the VISA

Marco,
Here are some suggestions:
1) Check the manual the Keithley manual to see how to configure the RS-232.
    On some models you need set Factory defaults to USER and turn on the RS-232.
    Also there may be a setting for SCPI which you want on (probably on by default).
2) On your PC - open Device Manager. See if a COM port exists and is functional.
     You must get this working before continuing.
      You can set the COM port parameters by right clicking and selecting Properties.
     (On some PCs the onboard ports can be disabled in the BIOS)
3) If step two was OK, open MAX (Measurement and Automation eXplorer).
    On the left side, click on Devices and Hardware.
    Click on Serial and Parallel.
    Go to the COM port you found in Device Manager.
    Open a VISA Test Panel.
    Now I don't have one I can look at right now, so this is general idea:
   Configure the COM port to match the Keithley settings (should be OK if step 2 worked)
   Go to the (I think) Input Output tab (you want to send a command)
   The command string input should already have a *IDN? entered, if not, type it in.
   Click on the Query button to send the command and check the response.
   If you get an ID string back (Company name, Model, FW Version ...) then it works.
   (Disregard an error saying it did not get enough charcters back.)
I hope this helps,
steve
Help the forum when you get help. Click the "Solution?" icon on the reply that answers your
question. Give "Kudos" to replies that help.

1230 Series LAP and WCS 6.0.199.0 Heatmap Problem

I recently upgraded from WLC 4.2.207.0 to 6.0.199.0 (WiSM), and WCS 5.2.130.0 to 6.0.196.0. All my heatmaps that contain 1231G LAPs are solid "maroon" (-35 dBm) in color. If I remove the 1231 APs from the heatmap selection on the right hand side, my coexisting 1131 and 1142's display their heatmaps properly. My maps are all CAD format (dwg) converted to .png's using WCS. My goal is to migrate to 802.11n in small steps which our Cisco rep said we could do. Any ideas?

Unfortunately, this is a bug in 6.0.199.0. The "fix" is to upgrade to 7.0.98.0 or 6.0.199.4. As you figured out, it only affects 1230 series APs, and only on the 802.11b/g side. Bug ID was
CSCti05687
Incorrect power unit was used on AIR-AP1231G-A-K9 and IR-AP1220-IOS-UPGRD.

How do you add space between the Series Name and the chart?

I'm trying to format a 3D pie chart and the series name is nearly unreadable depending on the angle. I would like to add some space between the series name and the chart.

On my charts, I just select the legends and drag them away from the chart. Hopefully this example helps:
Regards,

"I an creating a imagen using hue,sat and lum.I want to uses it as pattern,but i can´t to saved as png.Is it posible?"

I think to create a ideal pattern with specific values of hue,sat,and lum.I create a VI, and i can to see diferent images when change the hue and saturation,but it can´t be saved as png,etc, with a error"invalid image"
Attachments:
patrondinamyc1.vi ‏92 KB

HSL images can only be saved in the AIPD format. Please see the IMAQ Vision Concepts Manual or the LabVIEW help page for IMAQ Write File for more details. To save the image to another file format, you could convert it to RGB and then convert back to HSL when you are going to use the image later.
Regards,
Brent R.
Applications Engineer
National Instruments

Practical HDD Configuration on K7N2's Promise SATA and NV IDE3

Folks,
There are lots of good fragments on the board about use of IDE3, but not much on total layout of disks for modestly disk intensive applications. Without going to server-type SCSI320 controllers and super-fast drives, here are some questions ---
1a. I'm going to assume until some wise person disuades me, that IDE will just saturate too quickly with good drives.
1b. With the K7N2 architecture, I'm guessing that the Promise chip will pump data on the bus and become less saturated than IDE. Do we know this for sure?
2a. I come from the high end unix world before the days of gigantic storage devices. Back in the day it is an article of faith that disk striping almost always yielded better results.
I'm beginning to wonder about that for non-database PC applications for several reasons. An article that looks at queue depth also reveals that as you add striped drives to an SATA controller, performance may degrade. With just the Promise chip this is probably nit-picking, as were only going to stripe 2 drives. Still one wonders. Here's the paper --
http://www.storagereview.com/articles/200406/20040625TCQ_1.html
2b. Is it possible to run the Promise chip as JBOD? This could be really interesting. Can the IDE3 drive run alone, outside the Promise array?
AND FINALLY...
3a. On this board there are many stories of woe about using the NV IDE3, and good bits of info, but nothing complete. How do you build and manage it?? I don't mean ONE drive in the system, but TWO on Promise SATA and one on IDE3.
3b. Also, since it's controlled by NV, is there reason to believe that data will pump through more quickly than with the standard IDE bus (IDE1 and IDE2)??
This should be interesting...
Cheers, u.
Please PM me if you like.

Sorry chaps!
For current sytem see sig below.
Ta, Britt
IRQ 0   System timer   OK
IRQ 1   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard   OK
IRQ 3   Communications Port (COM2)   OK
IRQ 5   NVIDIA nForce PCI System Management   OK
IRQ 6   Standard floppy disk controller   OK
IRQ 8   System CMOS/real time clock   OK
IRQ 9   Microsoft ACPI-Compliant System   OK
IRQ 12   PS/2 Compatible Mouse   OK
IRQ 13   Numeric data processor   OK
IRQ 14   Primary IDE Channel   OK
IRQ 15   Secondary IDE Channel   OK
IRQ 18   WinXP Promise FastTrak 376/378 (tm) Controller   OK
IRQ 19   SupraExpress 56i   OK
IRQ 19   MSI MS-StarForce GeForce4 MX 440 with AGP8X (NVIDIA GeForce4 MX 440 with AGP8X)   OK
IRQ 20   Standard OpenHCD USB Host Controller   OK
IRQ 20   NVIDIA(R) nForce(TM) Audio Codec Interface   OK
IRQ 21   Standard Enhanced PCI to USB Host Controller   OK
IRQ 22   Standard OpenHCD USB Host Controller   OK
IRQ 22   NVIDIA(R) nForce(TM) MCP Audio Processing Unit (Dolby(R) Digital)   OK

In what series go and install each: builder,...eclipse

I want install Eclipse (ALL:JAVA, PHP, C/C++....MOBILE) and Flash Builder 4 and CF Builder... well in what series go and install each?

Hi,
If you have made any other modifications to your PC then remove those changes and revert to the original configuration.
If you still have issues then review this HP posted information.
Your PC is over two years old and typically HP ends support after 12 months when the warranty expires.
It's possible that the graphics card is faulty so RMA the card.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Need to exclude Sat and Sun from Leave Apply

Hi,
Need to exclude Sat and Sun from Leave Apply, the requirement is when user apply for leave and when he enter days like 1 to 10 the system should exclude sat and sun in this duration and Calculate Duration Button should show the remaining days in Total Field. In which formula or PL/SQL script should open to amend this. Currently system is only excluding Sunday.
Regards,

Hi,
Need to exclude Sat and Sun from Leave Apply, the requirement is when user apply for leave and when he enter days like 1 to 10 the system should exclude sat and sun in this duration and Calculate Duration Button should show the remaining days in Total Field. In which formula or PL/SQL script should open to amend this. Currently system is only excluding Sunday.
Regards,

[845 Series] SATA and overclocking

Similar Messages

Maybe you are looking for