845e max and radeon 7500

ok my problem is that i just bought this video card(ati radeon 7500) and on my mobo it says only use agp 4x 1.5v only but this card is a 4x/2x. it also says in my mobo manuel to use a 2x/4x card switch to 4x in the jumpers. my problem is that there is no jumpers on the card so what do i do. i dont want to distroy my mobo so what do i do.

I am pretty sure that ATI Radeon 7500 is a 1.5V 4X-compliant card. Just put it in and try it out. The motherboard has this routing thing that won't boot the computer if you have a 3.3V AGP card installed anyway, so you are safe. 8)

Similar Messages

RESOLUTION: GNB MAX and Radeon 9700 Crashes

I had various lock-ups, crashes and "Windows detected and recovered from a device failure" error messages with my GNB MAX motherboard and Radeon 9700 and they are now fixed.
I was able to receive a beta version of an upcoming set of drivers from ATI and they did the trick!!
Just wanted to give you all some hope.
Hang in there!

Oops, I spoke too soon. I think FastWrites is on (I remember turning it off before on previous drivers and noticing a big slow down that is not present now) but there isn't a SmartGart tab appearing in my ATI control panel any more. I checked Advanced - Options - Details and yes, 8X is on.
How can I verify that FastWrites is on without the SmartGart tab?

MSI 648 Max and Radeon 7900 pro

I have big troubles trying to setup my video card ATI Radeon 7900 pro. I try several drivers from ATI, I've tried Radeonator to downclock the video card, but the system is still very instable, hanging in every games (AoM, WC3) after few seconds, and even hanging while doing elementary stuff with the PC.
Anyone know something about this pb ?
Is it specific to the video card (i ca see a lot of pb with this card) ?
Is there a compatibility issue between video card and this mother board ?
Thanks in advance.

You can try going back through the earlier posts. I know there were quite a few dealing with the Radeon9700 and the 648Max. I don't have the Radeon so I can't help much if the problem is really related to that card. One thing you might check right off are the voltage readings in the BIOS. I know you need a pretty good power supply with that combination of motherboard and graphics card. I also know that there were some other issues as well.

Help! Problems with 845E MAX HSF seating

have a MSI 845E MAX and a P4 2.8 GHz cpu. I bought a coolmaster L71 for 478 socket type but when I put it on the cpu, the four little plastic white pins that hold the HSF mounting tray in place prevents the HSF from actually connecting with the CPU unless I use a load on paste (which is wrong)
If I take out the pins the HSF sits on the CPU fine but surley this cannot be correct? Has anyone else had this problem or have any ideas why?
I have also tried a mates P4 S478 HSF and it does the same, the four pins seem to stop it touching the cpu correctly.
Party

What's up? I got your Email - I don't know about cutting those pins off. Man, that really sucks those heatsinks aren't fitting correctly. What would be wrong with getting a stock Intel fan/heatsink? They are really cheap. I saw one for $7 shipped. Or get the f/h I have. It's a Coolermaster D14-7H53D. However, if you want to try and cut those pins go ahead because you can always buy a new bracket if it doesn't work. Let me know what happens. Good luck.
Man, you can't say (s)ucks in this forum.

845E Max Dead

Built new system about a month ago using 845E w/P4 1.7 Cpu. Ran 24/7 for 5 weeks and now has died. d Bracket shows RAM Prob, tried 3 different sticks and get same problem. The system started to act funny about 3 days before dying, Mouse Lock ups and system freeze. I cant belive 3 new Ram sticks are all bad I have tried all combination of them in each slot and adjusting them up a little like it said in another thread but no luck. Any other ideas.
P4 1,7
845 E Max
ATI 8700 DV All-In-Wonder Card
2 256 PC2100 Sticks Kingston/PNY
80 GB Maxtor
DVD Drive
52 x 24 x52 CDRW

I have the same board 845e max and the dbracket has told me that it was the chip and i have a 1.7 celeron so i replaced it and it still deosn;t start and it did gradualy die on me asell like mouse freezes well i sent it back then with an RMA form from msi and they replaced it adn well asoon as i got it back it died on me and told me the chip was dead again so i am really angry and it was about 5 weeks i had it the first time aswell
i think its time to find a differnt mother board either from msi or another company

[Solved] xf86-video-ati driver and [Radeon Mobility 7500] help

I have an thinkpad T42 laptop (video card is ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]) with openbox and slim and I instaled xf86-video-ati. My problem is that minimizing and maximizing are very slow, lxterminal decoration bar disapear..... I also tried to install xf86-video-ati-git without any improuvements.
this is my xorg.conf:
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "SynapticsTouchpad" "SendCoreEvents"
InputDevice "Keyboard0" "CoreKeyboard"
Option "AIGLX" "true
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "False"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
# FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
# FontPath "/usr/share/fonts/cyrillic"
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/share/fonts/Type1"
# FontPath "/usr/share/fonts/ttf/western"
# FontPath "/usr/share/fonts/ttf/decoratives"
# FontPath "/usr/share/fonts/truetype"
# FontPath "/usr/share/fonts/truetype/openoffice"
# FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
# FontPath "/usr/share/fonts/latex-ttf-fonts"
# FontPath "/usr/share/fonts/defoma/CID"
# FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
Load "dbe"
Load "glx"
Load "dri2"
Load "dri"
Load "synaptics"
Load "extmod"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "CorePointer"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "on"
Option "YAxisMapping" "4 5"
Option "XAxisMapping" "6 7"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "SynapticsTouchpad"
Driver "synaptics"
Option "AlwaysCore" "true" # send events to CorePointer
Option "VertEdgeScroll" "true" # enable vertical scroll zone
EndSection
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
EndSection
Section "Device"
Identifier "Card0"
Boardname "ATI Radeon"
Busid "PCI:1:0:0"
Driver "radeon"
Screen 0
Vendorname "ATI"
Option "MergedFB" "off"
Option "AccelMethod" "EXA"
Option "EXANoComposite" "false"
Option "FBTexPercent" "50"
Option "MigrationHeuristic" "greedy"
Option "DRI" "true"
Option "GARTSize" "1536"
Option "AGPMode" "4"
Option "Colortiling" "On"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Last edited by botzoboy (2010-05-29 07:39:30)

theapodan
this is my Xorg.0.log:
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686
Current Operating System: Linux arch 2.6.33-ARCH #1 SMP PREEMPT Thu May 13 12:06:25 CEST 2010 i686
Kernel command line: root=/dev/disk/by-uuid/7e750225-da5a-470f-a024-af37495f11d5 ro
Build Date: 01 April 2010 05:35:33PM
Current version of pixman: 0.18.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat May 29 09:20:42 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "SynapticsTouchpad"
(**) |-->Input Device "Keyboard0"
(**) Option "AIGLX" "true"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(II) Loader magic: 0x81e4c60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:1:0:0) 1002:4c57:1014:0530 ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] rev 0, Mem @ 0xe0000000/134217728, 0xc0100000/65536, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(**) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 6.12.192
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.7.0.901, module version = 1.5.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) LoadModule: "synaptics"
(II) Reloading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.7.0.901, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4290,
CYPRESS, ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5900 Series, ATI Radeon HD 5900 Series,
ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, CEDAR, CEDAR, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, CEDAR, ATI Radeon HD 5450,
CEDAR
(II) Primary Device is: PCI 01@00:00:0
(II) [KMS] Kernel modesetting enabled.
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "ColorTiling" "On"
(**) RADEON(0): Option "AccelMethod" "EXA"
(**) RADEON(0): Option "DRI" "true"
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon Mobility M7 LW (AGP)" (ChipID = 0x4c57)
(II) RADEON(0): AGP card detected
(II) RADEON(0): KMS Color Tiling: enabled
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): Output VGA-0 using monitor section Monitor0
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Using user preference for initial modes
(II) RADEON(0): Output LVDS using initial mode 1024x768
(II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) RADEON(0): mem size init: gart size :fdff000 vram size: s:2000000 visible:1f00000
(II) RADEON(0): EXA: Driver will not allow EXA pixmaps in VRAM
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 2.5.0
ABI class: X.Org Video Driver, version 6.0
(--) Depth 24 pixmap format is 32 bpp
(II) RADEON(0): [DRI2] Setup complete
(II) RADEON(0): Front buffer size: 3072K
(II) RADEON(0): VRAM usage limit set to 25804K
(==) RADEON(0): Backing store disabled
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Render acceleration enabled for R100 type cards.
(II) RADEON(0): Setting EXA maxPitchBytes
(**) RADEON(0): Option "MigrationHeuristic" "greedy"
(**) RADEON(0): Option "EXANoComposite" "false"
(II) EXA(0): Driver allocated offscreen pixmaps
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(II) UploadToScreen
(II) DownloadFromScreen
(II) RADEON(0): Acceleration enabled
(**) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Set up textured video
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(WW) RADEON(0): Option "MergedFB" is not used
(WW) RADEON(0): Option "FBTexPercent" is not used
(WW) RADEON(0): Option "GARTSize" is not used
(WW) RADEON(0): Option "AGPMode" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/radeon_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 270 x 203
(**) Option "Protocol" "ExplorerPS/2"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "on"
(**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 9
(**) Mouse0: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Mouse0: (accel) keeping acceleration scheme 1
(**) Mouse0: (accel) acceleration profile 0
(II) Mouse0: ps2EnableDataReporting: succeeded
(II) Synaptics touchpad driver version 1.2.1
(--) SynapticsTouchpad auto-dev sets device to /dev/input/event7
(**) Option "Device" "/dev/input/event7"
(II) SynapticsTouchpad: x-axis range 1472 - 5472
(II) SynapticsTouchpad: y-axis range 1408 - 4448
(II) SynapticsTouchpad: pressure range 0 - 255
(II) SynapticsTouchpad: finger width range 0 - 0
(II) SynapticsTouchpad: buttons: left right double triple
(**) Option "VertEdgeScroll" "true"
(--) SynapticsTouchpad: touchpad found
(**) Option "AlwaysCore" "true"
(**) Option "SendCoreEvents"
(**) SynapticsTouchpad: always reports core events
(II) XINPUT: Adding extended input device "SynapticsTouchpad" (type: TOUCHPAD)
(**) SynapticsTouchpad: (accel) keeping acceleration scheme 1
(**) SynapticsTouchpad: (accel) acceleration profile 0
(--) SynapticsTouchpad: touchpad found
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "XkbRules" "base"
(**) Keyboard0: XkbRules: "base"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) config/hal: Adding input device TPPS/2 IBM TrackPoint
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device ThinkPad Extra Buttons
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Sleep Button
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Video Bus
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Power Button
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) Mouse0: ps2EnableDataReporting: succeeded
(--) SynapticsTouchpad: touchpad found

K7T266 Pro2 and ATI Radeon 7500?

Ok, first off, I have been in the technical field for about 12 years, so there is no need to "dumb down" your responses...
All right. I've got the above board, and it has been working fine up until I bought a new ATI Radeon 7500 vid card. I shut down the computer, disconnected the power supply, and removed my old vid card (which, btw, was working fine, but it was an 8MB old card). Then I installed the new vid card and restarted the computer. At this point, it promptly refused to even post. The monitor light flashed as if it were in standby, and there were no sounds from the board. Everything is still recieving power, so that's not the problem. The "D-bracket" showed 1-Red, 2-Green, 3 and 4-Red. Now this says that there is something wrong with the memory (?). Switched RAM chips, then the d-bracket shows all red = CPU problems? So, I shut it down and waited for a bit. Restarted it again, and the same lighting on the d-bracket, with 1,3,4-Red, and 2-Green. Now the motherboard repeatedly emits 3 fast beeps, then a pause, then 3 fast beeps, etc.. So, I put in the old video card, and the same thing occurred, in a RANDOM order. So, keeping in mind that NOTHING other than the vid card was removed OR touched before the problem occurred. RANDOM errors are NOT the way to run technical items. RANDOM problems are meant for EXPERIMENTAL items...
I would really hate to have to send in my motherboard to MSI to get it fixed (on warranty), because my business RELIES on my ability to access my computer, and 3 months computer-less is unacceptable. If there is not some LOGICAL thing that may be wrong, I will have to simply go out and buy another new motherboard. Unfortunate as it is, I am afraid that it will NOT be an MSI, because all I have ever had is problems with this board, and the lack of technical support is a real problem.
Any ideas will be tried, and I will post results as soon as I see the suggestion. Thanks.

well if you can and I know I would take the ATI card back and get a refund and by a nvidia I got a $250 ATI AIW setting on my file cabnet as a paper wait
one other thing you could try if you have one a old PCI video card remove the ATi card put a PCi video card in and try to boot useing it if that works go into bios setup and under advanced chipset settings make sure all the agp settings are set to auto I know I had this problem before I had the AGP driver setting set manule to a setting that would not work with my video card and clearing cmos would not reset this setting to auto.
I had to use a old pci card to boot so I could reset this to auto.

Please Need Help!!!! (845e max bios setup)

i bought all my computer parts seperataly.
p4 1.7
845e max
radeon 9000 pro
128 ddr
Turning on the power for the first time the whole system worked fine (no operationg system is installed yet). while i was seting up the ami bios, specifically in the PnP&PCI configuration, i came across the PLUG AND PLAY AWARE O/S (manual description: when set to yes bios will only initialize the PnP cards used for booting . the rest of the cards will initialized by the PnP operating system like 98, 2000 or ME. When set to NO, bios will initialize all the PnP cards. Select Yes if the operating system is plug and play aware. all of a sudden the ami bios screen wasn't on my monitor. i rebooted and no ami bios setup.
i have the led D-BRACKETS connected to my motherboard and all of them are in red colour. it says on the manual that it will show informaion regarding the the processor.
anyway my cpu isn't busted i know because i went back to the retailer i bought it from and they did a test for me which cost me $20.00 cdn and it worked fine.
anyhow contact me if u have a suggestion
email:[email protected]

this mother board is jsut crapp there are alot of peopel having this problem i say replace it becsuae i got the same one over again and it died mabe i amjsut doing somethign wrong

Having trouble installing Radeon 7500 into K7T266 Pro

I am having all sorts of problems switching from my nVidia TNT 2 (MaxiGamer Cougar) video card to my new Radeon 7500. I am running an AMD Athlon 1400 with 512 MB DDR RAM.
I have the K7T266 Pro (MS-6380) chipset.
Can anyone think of what I am missing here. I think I have all the updates AGP drivers I need but I am not sure. I get lock ups prior to windows starting everytime. Even in safe mode.
Grrrr.

I ended having to format my c drive. Windows began doing some really funny things and then never started again with old or new video cards. I have re-installed windows but now sometimes my monitor stays blank when I start the computer. It is supposed to wake itself up but when it does, it has no picture. To solve this I shut down and flick the switch on the back and discharge everything. It then works again for another few times. Do you think this may be a problem with my power supply? I have an Enermax 350W. I bought it when I built the computer and figured it would have plenty of juice.
Thanks for you help

15" Studio Flat ADC Display PowerMac G4 400 MHz Radeon 7500 no video

Purchased a video card - Radeon 7500
ATI Radeon 7500 32MB ADC VGA MAC Edition video card
Computer is PowerMac G4 AGP Graphics (CPU type 2.7) 1 MB Level 2 cache
VGA works fine.
ADC is not operational. 15 inch (clear case) display not getting a signal, Profiler not showing any display connected to the ATY,Bluestone_B
SYSTEM REQUIREMENTS (VIDEO CARD)
Power Mac™ G4 with AGP 2X or AGP 2X/4X universal slot
DVD playback requires DVD drive
!!!!!!!!! WHATS WRONG?
PowerMac G4 400 MHz Mac OS X (10.3.9)

Hi Gary,
The G4 AGP graphics model is pre-ADC and its motherboard will not support a video card with a native ADC port. The ADC ports on such cards draw their power and USB feed via an extra leg on the card that fits into an extra slot at one end of the AGP slot on the computer motherboard. Your computer does not have this extra slot.
To run an ADC display off your computer, you can run a video card with a DVI output, then use a DVI to ADC adaptor such as this one:
http://www.drbott.com/prod/db.lasso?code=0111-DVAD
You can use VGA to ADC adaptors, but they are much more expensive (than a DVI to ADC adaptor plus another video card), and don't give as good a result.
Cheers!
Karl

Radeon 7500 Normal AGP card Without ADC (Used before on Windows Vista PC)

Dear ...
i read in some articals on internet that you can use this kind of Cards "Radeon 7500 Normal AGP card Without ADC (Used before on Windows Vista PC)" with Mac G4 Quicksliver 733Mhz ... just u have to install it and leave Machine on for sometimes till dedicated it is thatture ?
Message was edited by: waldhin

A Radeon 7500 (as well as any other AGP graphics card) that was removed from a PC must have its EEPROM chip re-programmed to function in an Apple computer. This is usually done while the card is installed in a PC, using a compatible flash utility program and the correct ROM code taken from the Mac version of the same card.

Radeon 7500 vs onboard Geforce2MX

I'm considering getting a ATI All-In-Wonder Radeon 7500 for my nForce1. Does anyone know whether this card is faster or slower than the onboard Geforce2MX? I really hate to take a hit in performance playing Counter Strike or Medal of Honor.
I found some performance scores on extremetech.com and tomshardware.com, but they were comparing to the AIW Radeon 8500 and the Geforce Personal Cinema which had a worse score than the AIW7500. AIW8500 is a bit pricey for my budget and the $400 AIW9700Pro is way out of my league.
BTW, would BIOS auto disable onboard Geforce2MX and free up 32Meg RAM when AGP board is installed?

Hello!
I had a radeon 7500 64mb ddr in my nforce.
Counter strike runs a bit better using the onboard gfx gf2.
With the radeon 7500 player and gun model details is a bit blurred, this is due to cs not the card. And fps drops slightly more buts it isnt that bad. CS has always been with ATi.
For games like sof2 the, using high detail 1024x768 in 32bit colour the radeon 7500 really is quite good, a million times better than the onbaord.
Its far better than the onboard video. I would use it.
But i sold it to my bro for £15 eheh!
Yes the onboard gfx will automatically disable its self and free the 32 mb its uses.
Also set you agp aperature size to 64MB, anything lower on the radeon 7500 and it will run slow.
I benchmarked my 7500 on default settings on the nforce around about 5200.
Tango

Is old 845E Max the same as 845E Max (HT ready)?

Hi:)
I've got MSI 6566 845E Max mainboard. But the only mainboard i found on http://www.msi.com.tw is 845E Max (HT ready). Can i use driver, firmware etc updates if they r for 845E Max (HT ready) to my mainboard? And finally, can i mount a Intel HT processor?
Thx for answer in advance.

I am NOT trying to be a WISE-GUY fellas! But I will BET you guy's the house that if he DOWNLOADS the BIOS (5.7) that his MO-BO WILL INDEED BE ABLE TO RUN IN H-T MODE, (as long as he gets a H-T PROC.)!. I say this because this has been done with other MO-BO companies! ie VIA, ASUS, AOPEN. I CAN VERIFY THIS STATEMENT FOR THE FACT THAT MY OTHER PC, A VIA P4BP-400-FL REV 2.0. WAS BUILT BEFORE (HT) CAME OUT, And on the VIA FORUM THESE SAME QUESTIONS WHERE ASKED! BECAUSE THE SAME BOARD WHITH REV.3.0 WAS (H-T) READY. BUT THE NEW BIOS REV. WAS FOR BOTH BOARDS!! I FLASHED BIOS (Thinking my BOARD would be a mess) BUT NO!! MY BOARD WAS NOW (H-T) READY!. SO I MUST SAY THAT I HAVE MORE FAITH IN MSI THEN I DO IN VIA, HENCE THE REASON I SAY THAT (IF THE NEW BIOS IS FOR BOTH BOARDS "REV 1.0 AND LATER) THEN Gotrec WILL INDEED HAVE A (H-T) BOARD AFTER HE FLASHES AND GETS A NEW PROC.!! PS. IF IT DOES NOT WORK FOR HIM I WILL BE IN HIDING ...Sean REILLY875

845E Max-L does not see 5 1/4 in. floppy drive

My first 845E Max-L mb had no problems with my Teac FD-505 combo (3 1/2 in. + 5 1/4 in.) floppy drive. I was able to boot to DOS on the 3 1/2 in. drive and access the 5 1/4 in. drive normally. However, the first board developed a serious problem and was replaced by the vendor.
The new board is unable to view the 5 1/4 in. drive when booted to DOS on the 3 1/2 in. drive. Both drives are correctly configured in the BIOS and both are visible on the CMOS summary page.
When I boot into any O/S, both drives are visible in My Computer and both are accessible. However, if the PC is put into S3 standby (suspend-to-RAM) and then resumed, the 5 1/4 in. drive can no longer be accessed and Windows reports an I/O error.
I removed the Teac combo drive, installed an individual 5 1/4 in. drive, configured it in the BIOS and it was duly identified on the CMOS screen. With a system disk in the drive, the system was booted. It went through a floppy seek, the floppy drive access light turned on, and then the floppy was ignored as the boot continued off the hard drive.
I tried downgrading the MSI BIOS from ver. 5.7 to ver. 5.5, but that didn't eliminate the problem. (The BIOS was, of course, reset using the JBAT1 jumper.) I tried different floppy cables, to no avail.
The Teac combo floppy and the single 5 1/4 in. drive work normally on another non-MSI mb.
How can I get the 5 1/4 in. drive to work correctly and, once in Windows, after resuming from standby? Is use of 5 1/4 in. drives a known problem with this mb? If not, could the problem be due to a bad fd controller?

Hi, Assaf.
Thanks for your response.
FOA, I no longer have the first board, so I don't know its PCB revision.
As for the new board, how do I see its PCB revision? Is it on the board somewhere? If so, where?
regards, Andy

No Video Card Works - 845E-Max

I purchase a new 845E-Max several years ago, and could not find a video card to work on this board. I gave up and put the board in storage until recently (hate to discard a new board). when I place a video card in the board it will not start. when the card is partly removed from the agp slot the board powers up, place card into board it shuts down.
I have tried MSI G4 Ti4200, MSI Ti4400, MSI FX5200, Jaton 3DForce TNT2 4x AGP card. I can remember trying some ATI cards too. I was hoping to put this board together for the holidays and here i am with the age old problem of "no video card works" I know this is a AGP 4X board - Any suggestions ? ? ?
Thanks - Hap

hi I suggest you take the board out of your chassis, assemble it on your desk, then try to slot in your display card. It could be due to your chassis and the motherboard doesn't fit well so whenever you fully slot in your display card, it just couldn't fit in well.

845e max and radeon 7500

Similar Messages

Maybe you are looking for