845e max could not load driver .. 2 pci.vxd

I am getting an error , Windows could not load the driver for this device because the computer is reporting two PCI.VXD bus types, in the device manager. I have Windows 98SE as my OS. Any ideas on how I correct this?

That did work eventually.....
When I did that I had problems with multimedia devices and ended up having to pull sound cards and reinstall the drivers.
I did download the Intel drivers that were mentioned in another posting.
Everything looks good now. Thanks for the help.

Similar Messages

NTKERN.VXD could not load device driver

I just installed the MSI 6380LE board with an AMD 2100+ CPU. I have the nVIDIAGe2 Ti video card. Two problems. When I restarted the computer after transfering my WD 20Gb HD, Phillips CD-RW, and SMC lan card to my computer it went thru the New Hardware sequence. No problems there. My printer was detected on the USB port in the back. However, when I went to print, got a cannot communicate with printer error from my Lexmark printer program. I went to my device manager and noticed that the following occurred:
VIA VT83C572/VT82C586 PCI to USB Universal Host
---> USB Root Hub!
This is repeated three times in the device manager.
When I click on properties for the USB Root Hub it tells me that the NTKERN.VXD could not load device driver.
Second issue. I have a new case that has front USB ports, however, the pin connectors are all separated and I am not sure how to hook them up to the MB correctly as I did not notice in the manual the pin assignments for those connectors. ANY help is greatly appreciated. And yes, USB is enabled for all in my BIOS setup.
Thanks in advanc!!!

well I did the same thing with my KT3 Ultra ARU, but it works fine other than the low system stability and generally slow behavior of the HDD's since they were not optimized for this board.. but generally everything works fine, but I will need to reload windows in order to have everything moving smoothly again, plus when you do reload windows you will notice a definite speed increase, and if is generally a good idea to back up your important files and do a clean install ever so often, Most IT techs reinstall their OS's every 6-8 months.

Admin tool could not load the essbase driver.Please check the configuration

Hi All,
I have obiee11g installed machine and want to connect that machine with essbase.
For that I have installed Essbase Client [11.1.2.1] by downloading the following files,
*1>Oracle Hyperion Enterprise Performance Management System Installer Fusion Edition Release 11.1.2.0.0 for Microsoft Windows (32-bit)*
*2>Hyperion Enterprise Performance Management System Foundation Services Release 11.1.2.0 for Microsoft Windows (32-bit) Part 1 of 4*
*3>Oracle Essbase Clients Release 11.1.2.0.0 for Microsoft Windows (32-bit)*
After that I manually added the ESSBASEPATH and ARBORPATH as Environment Variables (USER).
And also I manually added the essbasepath in bi-init.cmd file.
Finally I tried to connect essbase with BI through BI Admin Tool, I get the following Error
"*Admin tool could not load the essbase driver.Please check the configuration*."
kindly guide me to overcome this issue.
Thanks and Regards
sai
Edited by: 923924 on Apr 24, 2012 5:20 AM

Until you perform the configuration on the AD server, the following message will appear:
Error: Could not start the SSO service. Please check the configuration.
So configure the AD server so that the error message will not appear again.

Help - Could not load 'oracle.jdbc.driver.OracleDriver ...

I'm using oci8 to connect to the Oracle database.
URL: jdbc:oracle:oci8:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(PORT=1527)(HOST=testhost)))(CONNECT_DATA=(SID=fnoe2pa)))
When I tried to start the weblogic server, I got the following errors:
Can you suggest what I should do next (step-wise)??? Thanks, Bobby
<Sleeping in createResource()>
####<15/08/2002 14:09:43> <Error> <JDBC> <qawebmethods> <myserver>
<main> <system> <> <001060> <Cannot startup connection pool
"pool/test_myapp" weblogic.common.ResourceException:
Could not load 'oracle.jdbc.driver.OracleDriver
If this is a type-4 JDBC driver, it could occur if the JDBC
driver is not in the system CLASSPATH.
If this is a type-2 JDBC driver, it may also indicate that
the Driver native layers(DBMS client lib or driver DLL)
have not been installed properly on your system
or in your PATH environment variable.
This is most likely caused by one of the following:
1. The native layer SO, SL, or DLL could not be found.
2. The file permissions on the native layer SO, SL, or DLL
have not been set properly.
3. The native layer SO, SL, or DLL exists, but is either
invalid or corrupted.
For more information, read the installation documentation
for your JDBC Driver, available from:
http://e-docs.bea.com
     at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(ConnectionEnvFactory.java:212)
     at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:134)
     at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator.java:705)
     at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.java:282)
     at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:650)
     at weblogic.jdbc.common.JDBCService.addDeployment(JDBCService.java:107)
     at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:360)
     at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymentTarget.java:285)
     at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(DeploymentTarget.java:239)
     at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeploymentTarget.java:199)
     at java.lang.reflect.Method.invoke(Native Method)
     at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
     at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
     at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:360)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
     at $Proxy31.updateDeployments(Unknown Source)
     at weblogic.management.configuration.ServerMBean_CachingStub.updateDeployments(ServerMBean_CachingStub.java:2977)
     at weblogic.management.mbeans.custom.ApplicationManager.startConfigManager(ApplicationManager.java:372)
     at weblogic.management.mbeans.custom.ApplicationManager.start(ApplicationManager.java:160)
     at java.lang.reflect.Method.invoke(Native Method)
     at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
     at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
     at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:360)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
     at $Proxy42.start(Unknown Source)
     at weblogic.management.configuration.ApplicationManagerMBean_CachingStub.start(ApplicationManagerMBean_CachingStub.java:480)
     at weblogic.management.Admin.startApplicationManager(Admin.java:1234)
     at weblogic.management.Admin.finish(Admin.java:644)
     at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:524)
     at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:207)
     at weblogic.Server.main(Server.java:35)
>
####<15/08/2002 14:09:43> <Info> <JDBC> <qawebmethods> <myserver>
<main> <system> <> <001082> <Creating Data Source named
jdbc/test_myapp for pool pool/test_myapp>
####<15/08/2002 14:09:43> <Info> <JDBC> <qawebmethods> <myserver>
<main> <system> <> <001070> <Checking existence of connection pool
pool/test_myapp requested by user system>
####<15/08/2002 14:09:43> <Error> <JDBC> <qawebmethods> <myserver>
<main> <system> <> <001059> <Error during Data Source creation:
weblogic.common.ResourceException: DataSource(jdbc/test_myapp) can't
be created with non-existent Pool (connection or multi)
(pool/test_myapp)>
####<15/08/2002 14:09:50> <Info> <EJB> <qawebmethods> <myserver>
<main> <system> <> <010008> <EJB Deploying file: myapp-ejb.jar>
####<15/08/2002 14:09:50> <Warning> <J2EE> <qawebmethods> <myserver>
<main> <system> <> <160007> <You are running WebLogic Server with J2EE
1.3 features enabled. The implementation of specific J2EE 1.3 features
(EJB 2.0, JSP 1.2, Servlet 2.3, and J2EE Connector Architecture 1.0)
in BEA WebLogic Server 6.1 is of a non-final version of the
appropriate specification. It is subject to change in future releases
once the specification becomes finalized. This may cause application
code developed for BEA WebLogic Server 6.1 that uses the new features
of J2EE 1.3 to be incompatible with the J2EE 1.3 platform supported in
future releases of BEA WebLogic Server.>
####<15/08/2002 14:09:59> <Error> <J2EE> <qawebmethods> <myserver>
<main> <system> <> <160001> <Error deploying application myapp-ejb:
Unable to deploy EJB: Counter from myapp-ejb.jar:
The DataSource with the JNDI name: jdbc/test_myapp could not be
located. Please ensure that the DataSource has been deployed
successfully and that the JNDI name in your EJB Deployment descriptor
is correct.
>
####<15/08/2002 14:09:59> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101053> <[HTTP myserver] Loading web app: myapp>
####<15/08/2002 14:09:59> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101059> <[myserver] Loading myapp from WAR file:
C:\bea\wlserver6.1\.\config\mydomain\applications\.wlnotdelete\wlap31483\myapp.war>
####<15/08/2002 14:09:59> <Warning> <J2EE> <qawebmethods> <myserver>
<main> <system> <> <160007> <You are running WebLogic Server with J2EE
1.3 features enabled. The implementation of specific J2EE 1.3 features
(EJB 2.0, JSP 1.2, Servlet 2.3, and J2EE Connector Architecture 1.0)
in BEA WebLogic Server 6.1 is of a non-final version of the
appropriate specification. It is subject to change in future releases
once the specification becomes finalized. This may cause application
code developed for BEA WebLogic Server 6.1 that uses the new features
of J2EE 1.3 to be incompatible with the J2EE 1.3 platform supported in
future releases of BEA WebLogic Server.>
####<15/08/2002 14:09:59> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101031>
<[WebAppServletContext(1412030,myapp,/myapp)] extracting classfiles to
C:\bea\wlserver6.1\config\mydomain\applications\.wlnotdelete\wlap31483\WEB-INF\_tmp_war_myapp:>
####<15/08/2002 14:10:04> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101032>
<[WebAppServletContext(1412030,myapp,/myapp)] extracted classfiles
successfully...>
####<15/08/2002 14:10:04> <Info> <HTTP Session> <qawebmethods>
<myserver> <main> <system> <> <100037> <Creating SessionContext of
type: memory for webapp: /myapp>
####<15/08/2002 14:10:04> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101047>
<[WebAppServletContext(1412030,myapp,/myapp)] registering classpath
servlet with initArgs 'null'>
####<15/08/2002 14:10:04> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101047>
<[WebAppServletContext(1412030,myapp,/myapp)] registering getior
servlet with initArgs 'null'>
####<15/08/2002 14:10:04> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101047>
<[WebAppServletContext(1412030,myapp,/myapp)] registering tunneling
servlets with initArgs 'wl-dispatch-policy=direct'>
####<15/08/2002 14:10:04> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101047>
<[WebAppServletContext(1412030,myapp,/myapp)] registering JSPServlet
with initArgs '[JspConfig:
verbose=true,packagePrefix=jsp_servlet,-compiler=javac,compileFlags=,workingDir=C:\bea\wlserver6.1\config\mydomain\applications\.wlnotdelete\wlap31483\WEB-INF\_tmp_war_myapp,pageCheckSeconds=1,superclass=null,keepgenerated=false,precompileContinue=false,compilerSupportsEncoding=true,encoding=null,defaultfilename=index.jsp,compilerclass=null,noTryBlocks=false]'>
####<15/08/2002 14:10:04> <Debug> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101097> <Registering ServletContext:
"myapp:/myapp">
####<15/08/2002 14:10:04> <Info> <J2EE> <qawebmethods> <myserver>
<main> <system> <> <160003> <Deployed : myapp>
####<15/08/2002 14:10:04> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101133> <Initializing WEB server myserver>
####<15/08/2002 14:10:04> <Notice> <Management> <qawebmethods>
<myserver> <main> <system> <> <141052> <Application Poller started for
development server.>
####<15/08/2002 14:10:04> <Notice> <WebLogicServer> <qawebmethods>
<myserver> <ListenThread> <system> <> <000202> <ListenThread listening
on port 7001>
####<15/08/2002 14:10:04> <Info> <NT Performance Pack> <qawebmethods>
<myserver> <ListenThread> <system> <> <000000> <NATIVE: NTSocketMuxer
was built on Nov 1 2001 16:39:28
>
####<15/08/2002 14:10:04> <Notice> <WebLogicServer> <qawebmethods>
<myserver> <SSLListenThread> <system> <> <000202> <SSLListenThread
listening on port 7002>
####<15/08/2002 14:10:05> <Notice> <Management> <qawebmethods>
<myserver> <main> <system> <> <141030> <Starting discovery of Managed
Server... This feature is on by default, you may turn this off by
passing -Dweblogic.management.discover=false>
####<15/08/2002 14:10:05> <Notice> <WebLogicServer> <qawebmethods>
<myserver> <main> <system> <> <000331> <Started WebLogic Admin Server
"myserver" for domain "mydomain" running in Development Mode>
####<15/08/2002 14:10:11> <Info> <NT Performance Pack> <qawebmethods>
<myserver> <ExecuteThread: '14' for queue: 'default'> <> <> <000000>
<Allocating: '2' NT reader threads>
####<15/08/2002 14:10:13> <Info> <HTTP> <qawebmethods> <myserver>
<ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'> <system>
<> <101047> <[WebAppServletContext(5367844,console,/console)] actions:
init>
####<15/08/2002 14:10:18> <Info> <HTTP> <qawebmethods> <myserver>
<ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'> <system>
<> <101047> <[WebAppServletContext(5367844,console,/console)]
FileServlet: init>
####<15/08/2002 14:10:18> <Info> <HTTP> <qawebmethods> <myserver>
<ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'> <system>
<> <101047> <[WebAppServletContext(5367844,console,/console)]
FileServlet: Using standard I/O>

"thorick" <[email protected]> wrote in message news:<[email protected]>...
Most likely, the OCI libraries could not be loaded.
Before continuing down this path, is there any reason
why you want to use an OCI based Driver as opposed to the
all Java Oracle thin driver ?There is indeed a valid reason for my choice.
I am currently connecting to the Oracle "Rdb" 7.0 database (located on
VMS) - not Oracle Oracle.
The SQL Service software we're currently using is version 7.1. This
version works well with the OCI8 driver (when connecting to the
database from Windows NT). This version of SQL Service however does
NOT work for the THIN driver (unless we upgrade the SQL Service to
version 7.1.5.5 - which we're not prepared to do so because it is not
stable enough from our previous test/trials). SQLSRV Version 7.1.5.5
works for THIN driver but it will result in uncommitted
transactions/unresolved connection/stopping of listener issues and
there is a need to restart the service from time to time. Oracle has
since confirmed that this is a bug that they have yet to resolve...
So we have to stick to OCI8 (THICK) for the time being. I would really
appreciate it very much if you can tell me the various OCI libraries
that I need to load (in terms of WebLogic Server config file settings
etc..).
By the way I have already installed the Oracle 8 client software on
the NT server (where WebLogic Server is) and I have also set up the
relevant SID (using the Net8 Assistant) that points to the Oracle Rdb
database on the VMS. I have also tried using SQL*Plus to connect to
the database and I can connect properly to the database. But WebLogic
simply doesn't seem to load the software.
Help...
Regards,
Bobby Brown, writing from Australia.

Failure when connecting MS SQL SERVER from ODI ! could not load JDBS driver

i have some trouble with connecting MS SQL SERVER from ODI.
I have already downland jdbs driver 3.0 (and 2.0 ) and copy the sqljdbc4.jar to D:\oracle\product\11.1.1\Oracle_ODI_1\oracledi\agent\drivers( where the oracle jdbs driver is already exitst )....but i have this error :
could not load JDBS driver class..
thanks

After more investigation and even more chocolate, we've identified the problem and it's now working. For anyone else who strikes this problem in future, here's something to check/consider/try:
Even though Squirrel SQL Client was connecting and working ok using the MS JDBC driver (v 3.0), it recorded this in its logs:
Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AS" in the INTERSECT operation.
We've found that the open source jTDS driver does not have the same issue as the Microsoft one.
We've installed the current jTDS driver, recorded the driver name (net.sourceforge.jtds.jdbc.Driver) and the JDBC URL (jdbc:jtds:sqlserver://<hostname>:1433/<database>) and the connection is now working fine.
Hope this helps other people...
Thanks to those of you who offered suggestions and things to check...much appreciated.
Robyn

VDS didn't start: Could not load JDBC driver

Hello,
I want to start the VDS Tutorial, but I get an error:
Exception: Data source 'Derby database' failed. Check your CLASSPATH! (in Tools
-> Options) Could not load JDBC driver 'org.apache.derby.jdbc.EmbeddedDriver'
Shutting down...
Data source 'Derby database' failed. Check your CLASSPATH! (in Tools -> Options)
Could not load JDBC driver 'org.apache.derby.jdbc.EmbeddedDriver'
But I add the derby.jar file in the VDS under Tools - Options - Classpath
Have you any ideas...?!

I try to start the server without the tutorial and that works...

The tech that helped me download CC said he could not load it to my D drive, it had to go on C

The tech that helped me download CC said he could not load it to my D drive, it had to go on the C drive. I just bought a new computer with a separate drive for Photoshop. Why can't you load it on a separate drive or did the techie just not understand me or me him?

You can customize the installation location within your preferences for the Adobe Creative Cloud application.
Please be aware if you are installing on a separate drive because your SSD is not large enough you will negate most of the performance gains from the SSD by installing the application on a standard hard drive.

Win2000+weblogic510+oracle8i,Could not load 'oracle.jdbc.driver.OracleDriver'

星期四 三月 23 20:30:17 GMT+08:00 2000:<E> <JDBC Pool>
Failed to create connection pool "ejavaPool"
weblogic.common.ResourceException: Could not load 'oracle.jdbc.driver.OracleDriver'
because
System.loadLibrary threw java.lang.UnsatisfiedLinkError
with the message 'oracle.jdbc.driver.OracleDriver'.
This could occur if the JDBC driver is not in the weblogic.class.path.
If this is a type-2 JDBC driver, it may also indicate that
the Driver native layers(DBMS client lib or driver DLL)
have not been installed properly on your system or in your environment.
This is most likely caused by one of the following:
1. The native layer SO, SL, or DLL could not be found.
2. The file permissions on the native layer SO, SL, or DLL
have not been set properly.
3. The native layer SO, SL, or DLL exists, but is either
invalid or corrupted.
For more information, read the installation documentation
for your JDBC Driver, available from:
http://www.weblogic.com/docs/install/install_jdbc.html
     at weblogic.jdbc.common.internal.ConnectionEnvFactory.loadDriver(ConnectionEnvFactory.java:82)
     at weblogic.jdbc.common.internal.ConnectionEnvFactory.<init>(ConnectionEnvFactory.java:97)
     at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:328)
     at weblogic.jdbc.common.internal.JdbcInfo.initPools(JdbcInfo.java, Compiled Code)
     at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:220)
     at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
     at java.lang.reflect.Method.invoke(Native Method)
     at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
     at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java, Compiled Code)
     at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java:62)
any idea?

If you are trying to use the thin driver you need to make sure you have the
classes12.zip file in the weblogic server classpath. You can download this
driver from Oracle website.
hth
sree
"meijunyong" <[email protected]> wrote in message
news:[email protected]...
>
星期四 三月 23 20:30:17 GMT+08:00 2000:<E><JDBC Pool>
Failed to create connection pool "ejavaPool"
weblogic.common.ResourceException: Could not load'oracle.jdbc.driver.OracleDriver'
because
System.loadLibrary threw java.lang.UnsatisfiedLinkError
with the message 'oracle.jdbc.driver.OracleDriver'.
This could occur if the JDBC driver is not in the weblogic.class.path.
If this is a type-2 JDBC driver, it may also indicate that
the Driver native layers(DBMS client lib or driver DLL)
have not been installed properly on your system or in your environment.
This is most likely caused by one of the following:
1. The native layer SO, SL, or DLL could not be found.
2. The file permissions on the native layer SO, SL, or DLL
have not been set properly.
3. The native layer SO, SL, or DLL exists, but is either
invalid or corrupted.
For more information, read the installation documentation
for your JDBC Driver, available from:
http://www.weblogic.com/docs/install/install_jdbc.html
atweblogic.jdbc.common.internal.ConnectionEnvFactory.loadDriver(ConnectionEnvF
actory.java:82)
atweblogic.jdbc.common.internal.ConnectionEnvFactory.<init>(ConnectionEnvFacto
ry.java:97)
atweblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:328
at weblogic.jdbc.common.internal.JdbcInfo.initPools(JdbcInfo.java,Compiled Code)
at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:220)
at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java, CompiledCode)
atweblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java:62)
any idea?

Could not load the Bigger Tiles Modules

I use Photoshop CS5 on iMac 3.06GHz IC2D with Lion 10.7.2. When I start Photoshop a Popup says : Could not load the Bigger Tiles Modules because it does not work with this version of Photoshop. Pity, but how to disable this Popup at every start ?

Sure... I hope this helps and this is what you mean. It is the case that I installed it fresh on a new machine, but maybe I checked a wrong box along the way. I certainly have no reason to deny installing it any other way. Regardless, it was only a slight annoyance and such an easy fix.
Adobe Photoshop Version: 14.1.1 (14.1.1 20130910.r.414 2013/09/10:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:13, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 6
Logical processor count: 12
Processor speed: 4374 MHz
Built-in memory: 32710 MB
Free memory: 28757 MB
Memory available to Photoshop: 29685 MB
Memory used by Photoshop: 60 %
Image tile size: 1024K
Image cache levels: 4
Display: 1
Display Bounds: top=0, left=0, bottom=1200, right=1920
Display: 2
Display Bounds: top=0, left=1920, bottom=1200, right=3840
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
NumGPUs=1
gpu[0].OGLVersion="3.0"
gpu[0].MemoryMB=3072
gpu[0].RectTextureSize=16384
gpu[0].Renderer="Quadro K4000/PCIe/SSE2"
gpu[0].RendererID=4602
gpu[0].Vendor="NVIDIA Corporation"
gpu[0].VendorID=4318
gpu[0].HasNPOTSupport=1
gpu[0].DriverVersion="9.18.13.2049"
gpu[0].Driver="nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um"
gpu[0].DriverDate="20130621000000.000000-000"
gpu[0].CompileProgramGLSL=1
gpu[0].TestFrameBuffer=1
gpu[0].OCLSupported=1
gpu[0].OCLVersion="1.1"
gpu[0].CUDASupported=1
gpu[0].CUDAVersion="4.2.1"
gpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="1.30 NVIDIA via Cg compiler"
gpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[65536]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[4]
gpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[192]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[32]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[32]
gpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[4096]
gpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[2048]
gpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[124]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
gpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
gpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=1
Serial number: 90970468542907043447
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\
Temporary file path: C:\Users\Amighty\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 223.2G, 140.5G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Plug-ins\
Installed components:
   ACE.dll   ACE 2013/07/14-12:09:50   79.543790   79.543790
   adbeape.dll   Adobe APE 2013/02/04-09:52:32   0.1160850   0.1160850
   AdobeLinguistic.dll   Adobe Linguisitc Library   7.0.0
   AdobeOwl.dll   Adobe Owl 2013/03/03-12:10:08   5.0.13   79.533484
   AdobePDFL.dll   PDFL 2013/03/13-12:09:15   79.499517   79.499517
   AdobePIP.dll   Adobe Product Improvement Program   7.0.0.1786
   AdobeXMP.dll   Adobe XMP Core 2013/03/13-12:09:15   79.151481   79.151481
   AdobeXMPFiles.dll   Adobe XMP Files 2013/03/13-12:09:15   79.151481   79.151481
   AdobeXMPScript.dll   Adobe XMP Script 2013/03/13-12:09:15   79.151481   79.151481
   adobe_caps.dll   Adobe CAPS   7,0,0,21
   AGM.dll   AGM 2013/07/14-12:09:50   79.543790   79.543790
   ahclient.dll    AdobeHelp Dynamic Link Library   1,8,0,31
   aif_core.dll   AIF   5.0   79.534508
   aif_ocl.dll   AIF   5.0   79.534508
   aif_ogl.dll   AIF   5.0   79.534508
   amtlib.dll   AMTLib (64 Bit)   7.0.0.169 BuildVersion: 7.0; BuildDate: Mon Apr 8 2013 2:31:50)   1.000000
   ARE.dll   ARE 2013/07/14-12:09:50   79.543790   79.543790
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2013/07/14-12:09:50   79.543790   79.543790
   BIBUtils.dll   BIBUtils 2013/07/14-12:09:50   79.543790   79.543790
   boost_date_time.dll   DVA Product   7.0.0
   boost_signals.dll   DVA Product   7.0.0
   boost_system.dll   DVA Product   7.0.0
   boost_threads.dll   DVA Product   7.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.1.6.30929   2.1.6.30929
   CITThreading.dll   Adobe CITThreading   2.1.6.30929   2.1.6.30929
   CoolType.dll   CoolType 2013/07/14-12:09:50   79.543790   79.543790
   dvaaudiodevice.dll   DVA Product   7.0.0
   dvacore.dll   DVA Product   7.0.0
   dvamarshal.dll   DVA Product   7.0.0
   dvamediatypes.dll   DVA Product   7.0.0
   dvaplayer.dll   DVA Product   7.0.0
   dvatransport.dll   DVA Product   7.0.0
   dvaunittesting.dll   DVA Product   7.0.0
   dynamiclink.dll   DVA Product   7.0.0
   ExtendScript.dll   ExtendScript 2013/03/21-12:10:31   79.535742   79.535742
   FileInfo.dll   Adobe XMP FileInfo 2013/03/19-12:09:02   79.151561   79.151561
   filter_graph.dll   AIF   5.0   79.534508
   icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   imslib.dll   IMSLib DLL   7.0.0.116
   JP2KLib.dll   JP2KLib 2013/02/19-12:28:44   79.248139   79.248139
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libiomp5md.dll   Intel(R) OMP Runtime Library   5.0
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0
   LogSession.dll   LogSession   2.1.2.1785
   mediacoreif.dll   DVA Product   7.0.0
   MPS.dll   MPS 2013/03/15-13:25:52   79.535029   79.535029
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   PatchMatch.dll   PatchMatch 2013/06/11-12:08:08   79.542390   79.542390
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CC   CC
   Plugin.dll   Adobe Photoshop CC   CC
   PlugPlugOwl.dll   Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit)   4.0.1.34
   PSArt.dll   Adobe Photoshop CC   CC
   PSViews.dll   Adobe Photoshop CC   CC
   SCCore.dll   ScCore 2013/03/21-12:10:31   79.535742   79.535742
   ScriptUIFlex.dll   ScriptUIFlex 2013/03/21-12:10:31   79.535742   79.535742
   svml_dispmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0
   tbb.dll   Intel(R) Threading Building Blocks for Windows   4, 1, 2012, 1003
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   4, 1, 2012, 1003
   updaternotifications.dll   Adobe Updater Notifications Library   7.0.1.102 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   7.0.1.102
   WRServices.dll   WRServices Mon Feb 25 2013 16:09:10   Build 0.19078   0.19078
Required plug-ins:
   3D Studio 14.1.1 (14.1.1 x001)
   Accented Edges 14.1.1
   Adaptive Wide Angle 14.1.1
   Angled Strokes 14.1.1
   Average 14.1.1 (14.1.1 x001)
   Bas Relief 14.1.1
   BMP 14.1.1
   Camera Raw 8.2
   Camera Raw Filter 8.2
   Chalk & Charcoal 14.1.1
   Charcoal 14.1.1
   Chrome 14.1.1
   Cineon 14.1.1 (14.1.1 x001)
   Clouds 14.1.1 (14.1.1 x001)
   Collada 14.1.1 (14.1.1 x001)
   Color Halftone 14.1.1
   Colored Pencil 14.1.1
   CompuServe GIF 14.1.1
   Conté Crayon 14.1.1
   Craquelure 14.1.1
   Crop and Straighten Photos 14.1.1 (14.1.1 x001)
   Crop and Straighten Photos Filter 14.1.1
   Crosshatch 14.1.1
   Crystallize 14.1.1
   Cutout 14.1.1
   Dark Strokes 14.1.1
   De-Interlace 14.1.1
   Dicom 14.1.1
   Difference Clouds 14.1.1 (14.1.1 x001)
   Diffuse Glow 14.1.1
   Displace 14.1.1
   Dry Brush 14.1.1
   Eazel Acquire 14.1.1 (14.1.1 x001)
   Embed Watermark 4.0
   Entropy 14.1.1 (14.1.1 x001)
   Extrude 14.1.1
   FastCore Routines 14.1.1 (14.1.1 x001)
   Fibers 14.1.1
   Film Grain 14.1.1
   Filter Gallery 14.1.1
   Flash 3D 14.1.1 (14.1.1 x001)
   Fresco 14.1.1
   Glass 14.1.1
   Glowing Edges 14.1.1
   Google Earth 4 14.1.1 (14.1.1 x001)
   Grain 14.1.1
   Graphic Pen 14.1.1
   Halftone Pattern 14.1.1
   HDRMergeUI 14.1.1
   IFF Format 14.1.1
   Ink Outlines 14.1.1
   JPEG 2000 14.1.1
   Kurtosis 14.1.1 (14.1.1 x001)
   Lens Blur 14.1.1
   Lens Correction 14.1.1
   Lens Flare 14.1.1
   Liquify 14.1.1
   Matlab Operation 14.1.1 (14.1.1 x001)
   Maximum 14.1.1 (14.1.1 x001)
   Mean 14.1.1 (14.1.1 x001)
   Measurement Core 14.1.1 (14.1.1 x001)
   Median 14.1.1 (14.1.1 x001)
   Mezzotint 14.1.1
   Minimum 14.1.1 (14.1.1 x001)
   MMXCore Routines 14.1.1 (14.1.1 x001)
   Mosaic Tiles 14.1.1
   Multiprocessor Support 14.1.1 (14.1.1 x001)
   Neon Glow 14.1.1
   Note Paper 14.1.1
   NTSC Colors 14.1.1 (14.1.1 x001)
   Ocean Ripple 14.1.1
   Oil Paint 14.1.1
   OpenEXR 14.1.1
   Paint Daubs 14.1.1
   Palette Knife 14.1.1
   Patchwork 14.1.1
   Paths to Illustrator 14.1.1
   PCX 14.1.1 (14.1.1 x001)
   Photocopy 14.1.1
   Photoshop 3D Engine 14.1.1 (14.1.1 x001)
   Photoshop Touch 14.0
   Picture Package Filter 14.1.1 (14.1.1 x001)
   Pinch 14.1.1
   Pixar 14.1.1 (14.1.1 x001)
   Plaster 14.1.1
   Plastic Wrap 14.1.1
   PNG 14.1.1
   Pointillize 14.1.1
   Polar Coordinates 14.1.1
   Portable Bit Map 14.1.1 (14.1.1 x001)
   Poster Edges 14.1.1
   Radial Blur 14.1.1
   Radiance 14.1.1 (14.1.1 x001)
   Range 14.1.1 (14.1.1 x001)
   Read Watermark 4.0
   Reticulation 14.1.1
   Ripple 14.1.1
   Rough Pastels 14.1.1
   Save for Web 14.1.1
   ScriptingSupport 14.1.1
   Shake Reduction 14.1.1
   Shear 14.1.1
   Skewness 14.1.1 (14.1.1 x001)
   Smart Blur 14.1.1
   Smudge Stick 14.1.1
   Solarize 14.1.1 (14.1.1 x001)
   Spatter 14.1.1
   Spherize 14.1.1
   Sponge 14.1.1
   Sprayed Strokes 14.1.1
   Stained Glass 14.1.1
   Stamp 14.1.1
   Standard Deviation 14.1.1 (14.1.1 x001)
   STL 14.1.1 (14.1.1 x001)
   Sumi-e 14.1.1
   Summation 14.1.1 (14.1.1 x001)
   Targa 14.1.1
   Texturizer 14.1.1
   Tiles 14.1.1
   Torn Edges 14.1.1
   Twirl 14.1.1
   Underpainting 14.1.1
   Vanishing Point 14.1.1
   Variance 14.1.1 (14.1.1 x001)
   Variations 14.1.1 (14.1.1 x001)
   Water Paper 14.1.1
   Watercolor 14.1.1
   Wave 14.1.1
   Wavefront|OBJ 14.1.1 (14.1.1 x001)
   WIA Support 14.1.1 (14.1.1 x001)
   Wind 14.1.1
   Wireless Bitmap 14.1.1 (14.1.1 x001)
   ZigZag 14.1.1
Optional and third party plug-ins:
   Alias PIX 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
   ElectricImage 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
   HSB/HSL 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
   JPEG 2000 2.0
   SGI RGB 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
   SoftImage 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
   Texture Fill 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
   Wavefront RLA 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Plug-ins that failed to load: NONE
Flash:
   Extensis
   Adobe Exchange
   Kuler
Installed TWAIN devices: NONE

Suddenly getting UserNotFoundException: User Not Found: Could not load profile data from the database

Starting yesterday (I believe) we are suddenly receiving a "User not found" error when trying to view a user's profile page when clicking on their name (in search or elsewhere) via the url
https://www.contoso.org/Person.aspx?accountname=contoso%255Cmyuserlogin
This is happening for all users. (but profiles exist and seem ok, and sync with AD is running fine) When looking in the logs I see the error (full ULS log is later below)
Exception in LoadRequestedUserProfile: (Microsoft.Office.Server.UserProfiles.UserNotFoundException: User Not Found: Could not load profile data from the database.
The only clue of what MAY be going on is just before that I see the following two lines which came up after I changed the Database logging to Verbose:
ConnectionString: 'Data Source=INSTANCE;Initial Catalog=UPAPROFILEDB;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][UPAPROFILEDB]' Partition:
NULL ConnectionState: Closed ConnectionTimeout: 15
SQL connection time: 0.0456 for Data Source=INSTANCE;Initial Catalog=UPAPROFILEDB;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][HNet3_Svc_Prod_UPA_Profile]
If I am reading that correctly, does it mean the connection to the database is timing out instantly? I am able to use powershell to pull up profiles and print them to the screen while on the webservers. And it's only the one specific page that is not
working.
What sort of tests or further debugging can I do for the error above?
We are on premise, SharePoint 2013 sp1, sql2012, server 2012, claims using the full SharePoint Profiile Sychronization against AD. Farm has been running since last august. Last week the admin team did run windows update on all servers, I can't be sure
if it was broken for 5 days and no one noticed or if it broke yesterday.
I already did the following:
Verified the profiles do exist in central admin.
I can still access their personal sites directly via
https://www.contoso.org/personal/myuserlogin
I checked the ProfileDB database and made sure the service accounts for the UPA has dbowner, so does the farm account, and the web application pool has SPDataAccess.
Verified the AD sync account has proper rights in AD.
I reran a full synchronization which ran with no errors.
File systems on the webservers and appserver have plenty of free space.
Rebooted every server in farm
I even checked the bin directory of the mysite webapplication, (since once I had a weird problem where access to bin was removed.) WSS_ADMIN_WPG, WSS_RESTRICTED_WPG_W4 have full control and WSS_WPG,IIS_IUSRS all have read and execute.
I opened powershell on the webserver I can indeed load profiles and print their values.
Timestamp Area Category EventID Level Message Correlation
07/25/2014 14:11:08.43 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz)). Parent No
07/25/2014 14:11:08.43 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz) be11a89c-fbe8-a08d-57d2-afa6a4948743
07/25/2014 14:11:08.43 SharePoint Foundation Micro Trace uls4 Medium Micro Trace Tags: 0 nasq be11a89c-fbe8-a08d-57d2-afa6a4948743
07/25/2014 14:11:08.43 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz)). Execution Time=1.3859 be11a89c-fbe8-a08d-57d2-afa6a4948743
07/25/2014 14:11:08.47 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz)). Parent No
07/25/2014 14:11:08.47 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz) be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.49 SharePoint Foundation General ajji6 High Unable to write SPDistributedCache call usage entry. be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50 SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|fa\cbuchholz, ClaimsCount=167 be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50 SharePoint Foundation Files ak8dj High UserAgent not available, file operations may not be optimized. at Microsoft.SharePoint.SPFileStreamManager.CreateCobaltStreamContainer(SPFileStreamStore spfs, ILockBytes ilb, Boolean copyOnFirstWrite, Boolean disposeIlb) at Microsoft.SharePoint.SPFileStreamManager.SetInputLockBytes(SPFileInfo& fileInfo, SqlSession session, PrefetchResult prefetchResult) at Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedStreamBufferFactory.CreateFromDocumentRowset(Guid databaseId, SqlSession session, SPFileStreamManager spfstm, Object[] metadataRow, SPRowset contentRowset, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres) at Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow(Int32 rowOrd, Object ospFileStmMgr, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...) at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, ... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbst... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...rRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion,... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ... String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.SPWeb.GetWebPartPageContent(Uri pageUrl, Int32 pageVersion, PageView requestedView, HttpContext context, Boolean forRender, Boolean includeHidden, Boolean mainFileRequest, Boolean fetchDependencyInformation, Boolean& ghostedPage, String& siteRoot, Guid& siteId, Int64& bytes, ... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...Guid& docId, UInt32& docVersion, String& timeLastModified, Byte& level, Object& buildDependencySetData, UInt32& dependencyCount, Object& buildDependencies, SPWebPartCollectionInitialState& initialState, Object& oMultipleMeetingDoclibRootFolders, String& redirectUrl, Boolean& ObjectIsList, Guid& listId) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.FetchWebPartPageInformationForInit(HttpContext context, SPWeb spweb, Boolean mainFileRequest, String path, Boolean impersonate, Boolean& isAppWeb, Boolean& fGhostedPage, Guid& docId, UInt32& docVersion, String& timeLastModified, SPFileLevel& spLevel, String& masterPageUrl, String& customMasterPageUrl, String& webUrl, String& siteUrl, Guid& siteId, Object& buildDependencySetData, SPWebPartCollectionInitialState& initialState, ... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...String& siteRoot, String& redirectUrl, Object& oMultipleMeetingDoclibRootFolders, Boolean& objectIsList, Guid& listId, Int64& bytes) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.GetFileForRequest(HttpContext context, SPWeb web, Boolean exclusion, String virtualPath) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.InitContextWeb(HttpContext context, SPWeb web) at Microsoft.SharePoint.WebControls.SPControl.SPWebEnsureSPControl(HttpContext context) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.GetContextWeb(HttpContext context) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea) at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IEx... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...ecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error) at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb) at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompl... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...etion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50 SharePoint Foundation Files aiv4w Medium Spent 0 ms to bind 4224 byte file stream be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=11.7341 be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.52 SharePoint Portal Server User Profiles aj2aw Verbose GetPartitionPropertiesCache :: ApplicationId = c604ddac-b9f9-4661-b31f-44cdcf2b78dc be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.52 SharePoint Portal Server User Profiles aj2ax Verbose GetPartitionPropertiesCache :: Trying to find existing cache be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.52 SharePoint Portal Server User Profiles aj2az Verbose GetPartitionPropertiesCache :: Getting Cached object be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Portal Server User Profiles aj2aw Verbose GetPartitionPropertiesCache :: ApplicationId = c604ddac-b9f9-4661-b31f-44cdcf2b78dc be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Portal Server User Profiles aj2ax Verbose GetPartitionPropertiesCache :: Trying to find existing cache be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Portal Server User Profiles aj2ay Verbose GetPartitionPropertiesCache :: Found existing cache in httpcontext be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Server Database tzku Verbose ConnectionString: 'Data Source=HungerNet3;Initial Catalog=HNet3_Svc_Prod_UPA_Profile;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][HNet3_Svc_Prod_UPA_Profile]' Partition: NULL ConnectionState: Closed ConnectionTimeout: 15 be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Server Database ahjqp Verbose SQL connection time: 0.0583 for Data Source=HungerNet3;Initial Catalog=HNet3_Svc_Prod_UPA_Profile;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][HNet3_Svc_Prod_UPA_Profile] be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Foundation General adyrv High Cannot find site lookup info for request Uri http://www.hungernet.org/. be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Foundation General adyrv High Cannot find site lookup info for request Uri http://www.hungernet.org/. be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Foundation General adyrv High Cannot find site lookup info for request Uri http://lnkd.in/bb6rsHj. be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Server Database tzku Verbose ConnectionString: 'Data Source=HungerNet3;Initial Catalog=HNet3_Svc_Prod_UPA_Profile;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][HNet3_Svc_Prod_UPA_Profile]' Partition: NULL ConnectionState: Closed ConnectionTimeout: 15 be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Server Database ahjqp Verbose SQL connection time: 0.0456 for Data Source=HungerNet3;Initial Catalog=HNet3_Svc_Prod_UPA_Profile;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][HNet3_Svc_Prod_UPA_Profile] be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Portal Server User Profiles ajw8l High Exception in LoadRequestedUserProfile: (Microsoft.Office.Server.UserProfiles.UserNotFoundException: User Not Found: Could not load profile data from the database. at Microsoft.Office.Server.UserProfiles.UserProfile.Load(SqlDataReader myReader, Boolean bFirstRead, Boolean firstReaderIsViewerRights, Boolean includeColleagueRecords, Boolean includeLanguageAndRegionalSettings, Boolean shouldCloseReader) at Microsoft.Office.Server.UserProfiles.UserProfile.RetrieveUser(String strAcct, Guid gAcct, Byte[] bSid, Nullable`1 recordId, Boolean doNotResolveToMasterAccount, Boolean loadFullProfile, Boolean loadColleagueRecordIds, String strEmail) at Microsoft.Office.Server.UserProfiles.UserProfile..ctor(UserProfileManager objManager, String strAcct, Boolean doNotResolveToMasterAccount, Boole... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55* SharePoint Portal Server User Profiles ajw8l High ...an forceUserIsSelf, Boolean loadFullProfile, Boolean loadColleagueRecordIds, String strEmail) at Microsoft.Office.Server.UserProfiles.UserProfileManager.GetUserProfile(String strAccountName, Boolean doNotResolveToMasterAccount, Boolean loadFullProfile, Boolean loadColleagueRecordIds) at Microsoft.SharePoint.Portal.WebControls.ProfilePropertyLoader.LoadRequestedUserProfile(String& redirectionUrl)) be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Foundation General aat87 Monitorable be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Foundation General ajji6 High Unable to write SPDistributedCache call usage entry. be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Foundation Micro Trace uls4 Medium Micro Trace Tags: 0 nasq,20 ajji6,3 agb9s,10 ak8dj,1 b4ly,25 adyrv,1 adyrv,4 adyrv,3 ajw8l,1 aat87,3 ajji6 be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz)). Execution Time=78.9958 be11a89c-ebeb-a08d-57d2-a513d117e184

Have Windows Updates been applied? See my note about this
https://twitter.com/imorrish/status/491020435039854592
Look at the URL in the search results. It may have invalid character in which case you can use this fix
http://blogs.msdn.com/b/spses/archive/2014/06/30/sharepoint-2013-the-search-results-with-5c-the-character-will-become-double-encoded-and-causes-broken-links.aspx
Regards,
Ian
http://sps.cloudapp.net
Regards, Ian Internet Sites running on SharePoint 2013 http://j.mp/sp2013sites

WAMPSERVER 'PDOException' with message 'could not find driver'

Hi All,
I'm running wampserver 64 bit version with:
Apache : 2.4.4 MySQL : 5.6.12 PHP : 5.4.12 PHPMyAdmin : 4.0.4 SqlBuddy : 1.3.3 XDebug : 2.2.3
I have downloaded the Microsoft Drivers 3.0 for PHP for SQL Server.
I have put the drivers in my ext folder C:\wamp\bin\php\php5.4.12\ext
php_pdo_sqlsrv_54_ts.dll
php_sqlsrv_54_ts.dll
I have changed my php.ini file to included:
extension=php_sqlsrv_54_ts.dll
extension=php_pdo_sqlsrv_54_ts.dll
I have restarted my PC.
When I run the following php code:
<?php
$database = "master";
$conn = new PDO( "sqlsrv:server=(local) ; Database = $database", "", "");
?>
I still get the following error message:
Fatal error: Uncaught exception 'PDOException' with message 'could not find driver' in W:\wamp\www\sqlservertestV02.php on line 4
I have tried everything I can think of but the driver does not seem to load correctly.
Any help would be greatly appreciated.
Kind regards,
Ernst.

Hello,
The Microsoft Drivers 3.0 for PHP for SQL Server is used to read and write SQL Server data from within PHP scripts. Since you use MySQL, you should install PDO Driver for MySQL and use pdo_mysql module.
Reference: http://cn2.php.net/pdo_mysql
Regards,
Fanny Liu
If you have any feedback on our support, please click
here.
Fanny Liu
TechNet Community Support

Could not load file or assembly "Oracle.DataAccess" or one of its dependencies

Hi All,
I am trying to run this web application. I keep getting this error
"Could not load file or assembly "Oracle.DataAccess" or one of its dependencies. An attempt was made to load a program with an incorrect format."
Exception details: System.BadImageFormatException. "Could not load file or assembly "Oracle.DataAccess" or one of its dependencies. An attempt was made to load a program with an incorrect format."
Below are the things that I already tried.
1) replaced all the oracle dll's with 32 bit oracle dll i.e 2.112.3.0
I have 32 bit client installed on 64 bit machine. The operating system is windows 7.
2) compile each individual project individually. Deleted all the oracle dependent files dll and then added the 2.112.3.0 dll's individually and then compiled each project
3) Register the 32 bit dll on GAC using this statement
gacutil /i %ORA_HOME4%\odp.net\bin\4\Oracle.DataAccess.dll
gacutil /i %ORA_HOME4%\asp.net\bin\4\oracle.web.dll
for the above two statements, I copied the gacutil.exe from c:\Program Files(x86)\Microsoft sdk\windows\v7.0A\Bin\NETFX4.0 Tools\X64
to C:\ drive and then
I executed the above two statement:
gacutil /i %ORA_HOME4%\odp.net\bin\4\Oracle.DataAccess.dll
gacutil /i %ORA_HOME4%\asp.net\bin\4\oracle.web.dll
when I excecuted the above two statements, I didn't get any message, I exceuted them in Dos windows under administrator privilege.
4) I also deleted all the Temporary ASP.net files from this location
c:\windows\Microsoft.Net\V4.0.30319\temporary ASP.net files
I also changed the web application build Platform target to X86, Originally, it was at "ANy CPU". out of frustration, I also tried changing the platform target to X64 and then I got the error message saying
" Cold not load file or assemble . webapp" or one of its dependencies. An attempt was made to load a program with an incorrect format.
I don't have IIS installed on my computer, I am running this application in visual studio 2010 so I think it will be using the inbuild IIS that comes with visual studio.
I spend lot of hours resolving this issue, but still getting the same error again and again.
any help or hint will be highly appreciated.

You have a 32/64bit mismatch going on.
Possibly the bit where you said you replaced the .dll's with 32 bit Oracle dll's is the source of the problem.
You needs that Oracle.DataAccess managed wrapper to be able to locate the underlying oci client dlls of the appropriate version.
The ODP .net install guide is very very good and thorough and straight forward to read and use and understand and explains how to achieve this.
Also what is the target compile type of your VS project? That'll have to be 32 bit, or any as well.

PE 5.0.2 - Could not load the FastCore Routines module because the file could not be found.

The "view and organize photos" mode seems to work just fine, but when I attempt to open the "edit and enhance photos" mode, I get an error box with this message: "Could not load the FastCore Routines module because the file could not be found", and then it shuts down after I click ok. I have installed the 5.0.2 patch and have uninstalled and reinstalled the program, to no avail. I had no firewall running when installing the program, nor do I own the program "Clean Sweep". What can I do?
Thanks for any help
OS = Windows Vista.

CANNOT LOAD FASTCORE ROUTINES, MMX CORE ROUTINES,
           MULTIPROCESSOR SUPPORT NOT FOUND
          SUCCESSFULLY REPAIRED - STEP BY STEP
I made the repair for Elements 5 on an XP version Operating System PC by doing this:
I went to....
Start / All Programs / Accessories / Windows Explorer
and selected.....
My Computer / C:
which is my drive with its operating system where Photoshop is installed.
I then clicked....
Documents and Settings
Then - in each - of the three icons I found.....
All Users, Default User, and Owner
I went into....
Application Data / Adobe / Photoshop Elements
In that last file I removed ALL the contents.... IN EACH !
After rebooting, my Photoshop Elements 5 started to work.
I think with research and all I invested five hours. May this save you 4 1/2.
I was paranoid and put the contents of each file into a new file I identified
clearly in case it I have to replace one of the parts out in the future.
I hope this is of help to some future reader.
Other comments here seem to indicate that this solution has
worked in version 4 and up and fixed early versions of Vista.
This appears to be a common problem after a drive repair or partitioning.
Why they can't just tell us this is a mystery to me.
-- Bon Courage! --
                                  Ken

Can't export 'Could not load image' in new photos app

Since upgrading to the new photos app I'm having trouble exporting photos within folders where it gives me the error 'could not load image' have tried running a repair on the library but no luck. In iTunes when I go to sync the folder it comes up with 0 which makes me think they could be corrupted somehow. Please help

For me this problem was caused because I moved my iPhoto library to a different hard drive before converting it to Photos. I solved this by doing the following:
1) Opened the original iPhoto library with iPhoto in the original location, and made sure the Photos/Movies that did not work were working.
2) In iPhoto, I chose File->Switch Library and chose the original iPhoto Library
3) I moved the library to the new hard drive
4) I held down the Option key while launching iPhoto
5) I chose "Other Library" and selected the original iPhoto library in the NEW location
6) Quit iPhoto
7) Open the Original library in the NEW location with Photos
After it converted the iPhoto library to a Photos library, everything seemed to work.
Steps 1 through 6 came from this article:
http://appleinsider.com/articles/15/01/25/how-to-safely-move-your-macs-iphoto-li brary-onto-an-external-drive
Hope this helps. If you don't have your original Library, I am not sure what to do.

"Could not load scene into memory. Your document may be damaged." Lost whole timeline.

Please help me - I have been working on a Flash CS6 file for a while now, and just got the message "Could not load scene into memory. Your document may be damaged." The file is not big, all it contains is 3 layers - one embedded video FLV file and 2 layers on top that only contain brushstrokes. The file is on my external hard-drive and now I get the message when I open it on either of my computers. I read feedback that I should re-link or re-import my assets, so I re-made the FLV file and imported it to replace the old one that it said couldn't be found. The problem is the timeline is completely empty. Even once I import the new video, the timline only has one "layer 1" with only one blank keyframe. Where is the rest of my work? I am good with backing up but was just away for a week and got a lot of work done so I couldn't back it up until I was back home... and obviously that isn't happening now.
Please help if you have any idea where my work has disappeared to.

Hi GregirArt,
Can you please check your PublishSettings.xml file whether is there any duplicate profile entries?
You can check the same by renaming your .fla to .zip and extract the zip file to open the PublishSettings.xml
If you find multiple duplicate profile entries then please remove all the duplicate entries from the file and rename the file back to .fla and see if that helps.
Thanks!
Mohan

845e max could not load driver .. 2 pci.vxd

Similar Messages

Maybe you are looking for