845pe max-l mobo, what should dram setting be?

i have ddr333 ram installed, should the dram frequency setting be set to auto or 333 ? does it make any difference?

It (shouldn't) make any difference.

Similar Messages

  • What should I set me screen resolution to in photoshop CC with my late 2009 27" iMac?

    What should I set me screen resolution to in photoshop CC with my late 2009 27" iMac?

    If its native resolution is 2560x1440 then some people do find it marginal with a 27 inch screen, but I'd have thought it workable if you know where everything is.  People are using that screen res on tiny laptops, but to be fair, they are not much liking it with Photoshop.
    I don't know how Retina support works with CC, but I wonder if you could force it on your iMac?
    Any Mac users out there know how Retina support works?

  • MSI 845PE MAX-L mobo no power whatsoever

    Hi,
    Just upgraded my mobo, RAM & processor to the following:
    MSI 845PE MAX-L mainboard
    Intel Pentium 4 2.4 GHz
    DDR-DIMM PC2700 512MB
    Put everything together and worked a treat from Monday. Reinstalled all my software including XP and had everting running smoothly for over 24 hours with the tower boxed up (so no possibility of accidentally touching any componentry).
    This morning I tried to switch on the machine and NOTHING. No response from the mobo no fans no lights no beep - nothing.
    Checked all leads in place.
    Then tried power supply (Eagle ATX 350W Switching Power Supply Pentium 4 compatible) on my old ABIT mobo together with my old 256 Mb SRAM & Hercules 3D Prophet 32MB graphics card. It worked!
    So put same setup back on the new MSI mobo, i.e. just graphics card, 512Mb DRAM, power supply & Intel 2.4 processor. Still nothing. Pretty sure got all my leads from the tower in all the right places on Mobo as they matched the previous configuration and that wouldn't have worked before, right?
    Whats going on, why does my pc work one day and then can't be arsed the next?
    Lloydich

    I had an Eagle 350watt PSU come supplied in my new case but i didnt trust the PSU so i took it out without even trying it.
    What is your complete system build setup?
    Those el-cheapo PSU's are not really upto running the most intense of systems despite what the manufacturers say.
    Unplug a few components from off the PSU and try to boot up again... its not impossible the PSU is dead... honestly if you spend alot of money on a new system it seems criminal not to get a decent PSU, im not criticisng here im just surprised how many people dont consider getting a 'good' PSU to power their new state of the art PC's.
    Try the unplugging of a few components that connect to the PSU if this dont work for you then if possible try a better PSU (350 watt does not neccesarily mean its good, some cheap 350 watt PSU's are less powerful than a good 300 watt PSU)

  • HT on Neo Plat 2 what should I set it to?

    I have a Neo Platinum 2 with a A64 3500+ in it, when I got into the bios HT is set to 4 as default, is that right or should it be set to a different number?  I do not want to overclock just run the chip at its correct speed.
    Thanks for any help in advance

    nVIDIA® nForce3 Ultra Chipset - HyperTransport supporting speed up to 1GHz (2000MT/s)
    If I'm not wrong, the default should be 200(HTT) x 5(HT) =  1000Mhz and it's DDR so 1000 x 2 = 2000MT/s
    If you are overclocking you should set the HT to 4x or 3x depends on what's your HTT. Just remember to keep close to 1000Mhz
    Kindly correct me if I'm wrong 

  • What should I set up in locale.conf to avoid conversion errors?

    When I try to use my Ruby script I always get a "invalid byte sequence in US-ASCII (ArgumentError) exception". I managed to track down that program arguments are passed in US-ASCII encoding. However Ruby scripts are using strings with UTF-8 encoding. Formerly those Ruby scripts worked fine, and I found out they keep working if I explicitly convert program arguments (passed as ARGV[]) to UTF-8 encoding.
    I think I have "locale" problems. Maybe I should set up LC_CTYPE somewhere in the config files.
    When I issue command "locale -a" I see:
    C
    POSIX
    en_US.utf8
    hu_HU.utf8
    /etc/locale.conf
    LANG=en_EN.UTF-8
    LANGUAGE=en_EN.UTF-8
    LC_CTYPE=en_EN.UTF-8
    However I added the last line recently, and I don't know how to "source" this kind of file, to manifest their content.

    As far as I know, the locale / LANG setting en_EN.* does not exist, at least it does not appear in my /etc/locale.gen.
    You probably want en_{US,GB}.UTF-8 (or anything else from /etc/locale.gen)
    Though, I am not sure whether this is related to your problem, since 'locale -a' gives correct output.
    Last edited by respiranto (2015-06-02 20:18:07)

  • What should compatability setting be for 32 bit windows 7

    Recently my computer guy switched me from Internet Explorer to Firefox. Since then I have been having problems with computer overheating. I believe it relates to Flash Player used for playing games on facebook. I have researched and found others have had problems with this also. In my researching I looked at Firefox properties and found that the Compatibilities settings show Windows xpService Pack 3 and am wondering why the setting is not Windows 7.
    I have done further research and found the CPU is much higher percentage and my computer definitely overheats when I use the flash player playing the games. Could the properties setting be wrong and could it be the problem. If not any suggestion would be appreciated . Thank You

    I'm sorry but I reset as advised and no difference ... NOTE HOWEVER... I did not get a 'finish' button to click after doing reset.. a pop up re signing up for newsletter with video came up instead... ??
    Re the problem however... I went to facebook and started a game which uses flash player... AND my computer started heating up right away and within a span of 2-3 minutes the CPU shot up to 70% I played for 1/2 hr and cpu stayed up .. When I came off the game (and flash player) it went back down to 1% CPU. Note again this overheating of my computer only started when I came to firefox browser...from Internet Explorer.
    question...Should the properties of firefox be changed from compatability xp service pack 3 TO Windows 7 ?? Thanks
    I'd appreciate any further help.. to stop this overheating

  • What should i set the quicktime speaker setup for itunes?

    I have 4 speakers and a sub........altec lansing's.....Is that considered a 4.1 setup....and if so can i also consider 4.1 and quadrophonic setup?....and also im assuming if i had that center speaker it would be considered a 5.1 setup...

    No, you cannot create a QT reference movie using QT Conversion. The reason I'm asking you all these (seemingly unrelated) questions is that I get the sense that you are resizing in your export out of FCP 5, and resizing in not the optimal fashion.
    Detail your sequence settings in FCP - including frame size - and how exactly are you exporting to Compressor.

  • In iLife08 what is best setting to convert avi 720 and digital video 1080i

    What is the bottom line for best quality for 720 p TV.
    1.) My import is digital video 1080i to i Movie 08 (full quality)
    What should I use for sharing on AppleTV
    - the preset Large (which is 960x 540)
    - or some custom setting 25 fps at 1220x 720? ( H.264 display dimensions at 24/25 fps is 720p (1280x720) ) - or what should the setting be??
    2.) Have Windows avi older 720 *480 video, what is best setting to convert this for Apple TV? The 640 setting on QuickTime premium is not very good
    Thank you so much. Peter

    Your best option if you are using NTSC footage in imovie is the export to/movie large (960 x 540) at 30 fps, the resolution won't go any higher and still work on the tv. Don't even think about changing the framerate to 24/25 fps, even though you'll be able to export to 720p (1280 x720) changing the framerate will make your video jerky.
    If you are using PAL then yes you could export to 720p (even though the specs say 24 fps, 25 fps does in fact work as well), you could try a few tests yourself but I've already done them and IMHO there is so little difference between 960 x 540 and 1280 x 720 that it isn't worth messing about setting up and trying several manual exports to get the best results when you can click one button and be done.
    So far a AVI conversion is concerned, I'd try mpegstreamclip, but saying that I can't really be sure. AVI is a container not a codec and I would need to know what codec is actually used inside the container to answer your question properly (Quicktime may tell you though). The problem with AVI is that it is simply so old (even microsoft abandoned it over 10 years ago), unfortunately in a small number of cases some of the codecs that were used in AVI are simply no longer able to be converted. Probably not so likely but at least you are warned.

  • MS-6580 (845PE Max VER 2.0) not POSTING with 2GB of DRAM -- POST with only 1GB

    Ok I am currently fixing a client's PC, he wanted a RAM upgrade from 1GB to 2GB. I purchased a Komputerbay 2GB (2 X 1GB) DDR DIMM (184 PIN) 333Mhz DDR333 PC2700 kit, it was the cheapest I could find. The problem is, the system will not POST with the two 2GB modules installed, only with 1GB on either DIMM slot. I've tested them both RAM modules, and they work. Before, the PC had 2x 512MB DRAM installed, and it was working, so I don't think there is anything wrong with the DIMM slots.
    When I start the system, I get two paused beeps, and some weird noise, not sure what is.
    I've read the motherboard manual, and it says the maximum support is 2GB DDR 333mhz.
    Any help would be appreciated, thanks!
    PC Specs:
    [ALL SETTINGS ARE STOCK -- NOT OVERCLOCKED]
    CPU: Intel Pentium 4
    MOTHERBOARD: MS-6580 (845PE Max) ver.2
    PSU: Q-Max 350W ATX
    GPU: nVidia e-Geforce2 NV11-A1 MX400 64MB

    Quote from: Mike on 22-October-11, 03:36:53
    Does it post with only one 2GB dimm installed?
    I don't believe the board/chipset will support 4GB(2x2GB).
    http://eu.msi.com/product/mb/845PE-Max2.html#/?div=Detail
    I don't know where you're getting 4GB, I never said anything about 4GB - I must have made a type but what I mean was: The motherboard wouldn't post with two 1GB modules (2GB) as specified to be the maximum according to the manual. It would only post with 1GB(1x1GB or 2x512MB) or 1.5GB(1x1GB + 1x512MB) of RAM.
    No worries, the problem is resolved now.

  • What key fields should i set in DSO extracting data from 2LIS_02_ITM

    hi experts
    i extract data from 2LIS_02_ITM into a DSO, i know the DSO isn't a must, becoz the 2LIS_02_ITM delta type is ABR, but i want to keep the info in change log.
    so, what the key fields should i set in the dso? just ebeln and ebelp is enough?
    hunger for ur advice and thanks a lot!

    If you extract ITM toa DSO you cannot maintain a log of every change....the data will come ....but when the data must be activated the reference of the ebelp ebeln will remain only a single record....if you want to maintain all the data you must create another field in extractor with you can difference all the changes for one single ebelp ebeln...
    Regards

  • HT4847 I am unable to delete the last backup from icloud, i checked my all device setting but it still say "cannot delete icloud this time because it is in use,"Please tell me what should i do.

    I am unable to delete the last backup from icloud, i checked my all device setting but it still say "cannot delete icloud this time because it is in use,"Please tell me what should i do                             

    It still didn't work...
    Within this commonfiles\apple folder, there is only one folder, labeled "Internet Services." Within this folder, there are 6 folders, labeled:
    APLZOD.resources
    BookmarkDAV_client.resources
    CoreDAV.resources
    iCloud.resources
    iCloudServices.resources
    ShellStreams.resources
    Within all but CoreDAV and BookmarkDAV_client, there are multiple different folders, all labeled starting with a two letter (acronym I believe, for different languages) then .lproj (for example, a folder is labeled "ar.lproj".
    In each of the folders of APLZOD.resources, there is a file labeled "APLZODlocalized.dll."
    In all of the folders containing the multiple .lproj folders, there are likewise "name"localized.dll files contained.
    In the BookmarkDAV_client and Core DAV folders, they each contain only one file, "Info.plist"
    I attempted to delete all of these files, and still, the FileAssassin could not delete them. I unlocked one of them for instance, and I tried to delete the file myself (thru windows explorer and just clicking delete), and I still had the same issue of coming eventually to the window requesting me to "try again" to have permission.
    What can I do?? I'd like to avoid Unlocker, but if it really is a reliable and SAFE program, and someone knows a SAFE place to download it from, I'd appreciate it very much so!!
    thanks!!

  • My 6  is not allowing me access to icloud nor to any of my email addresses.  I've tried to reset it but it is asking me for my 'restrictions' passcode and I never set one up. What should I do?

    My 6+ iphone is not allowing me to access icloud nor any of my email accounts.  I've tried to reset it but it asks for my 'restrictions' passcode which I
    did not set up.  I can't reset it via itunes either because it says I have to turn 'find my iphone' off but it is off.  What should I do please?

    Hi nadzpad,
    I'm sorry to hear you are having issues with your iPhone 6 Plus. I also apologize, I'm a bit unclear on exactly what you are seeing or describing. If you are being asked for a Restrictions password, you may find the following article helpful:
    About Restrictions (parental controls) on iPhone, iPad, and iPod touch - Apple Support
    If you are getting a message that you must turn off Find My iPhone before restoring from iTunes, then these articles may be more useful:
    iCloud: Remove your device from Find My iPhone
    Find My iPhone Activation Lock - Apple Support
    Regards,
    - Brenden

  • I am trying to set an open DNS using the MacAir. But when I tried to flush the existing one at utilities/terminal, it will not work.  I am using Yosemite.  May I know what should be the command line so that I can shift to an open DNS?  Thanks

    I am trying to set an open DNS using the MacAir. But when I tried to flush the existing one at utilities/terminal, it will not work.  I am using Yosemite.  May I know what should be the command line so that I can shift to an open DNS?  Thanks

    >SystemPreferences>Network>DNS

  • HT204053 We have apple computer and set up 1 apple id and for music on iPods.  Now we have 3 apple phones and want to share the music but keep our contacts separate. what should we do.

    We started with an apple computer and set up 1 apple id and for music on iPods.  Now we have 3 apple phones and want to share the music but keep our contacts separate. what should we do? Right now we have the same apple id on the PC, ipodtouch, ipod, and 3 phones.  They said make seperate clouds?

    Hello there MizzouTrojan,
    If I understand correctly you want all 6 devices to have access to a single calendar that each device gets notifications for and can edit. You can do that with an private iCloud shared calendar. First sign into www.icloud.com and use these steps from the following article to share a calendar:
    iCloud: Share a calendar with others
    Share a calendar privately
    Click the Share button to the right of the calendar name in the sidebar, then select Private Calendar.
    Note:    You can also share the same calendar publicly. For instructions, see the next task, “Share a calendar publicly.” 
    Type the invitee’s email address in the Add Person field and press Return.
    Click the pop-up menu with the invitee’s name and choose access privileges (View & Edit or View Only). 
    For each person you want to share the calendar with, repeat steps 2 and 3.
    When you’ve invited everyone and set their privileges, click OK.
    Invitation emails are sent from your iCloud email address to the participants you specified.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • My iphone 4s is saying NO SERVICE.I tried to put it on airplane mode,tried to reset the network setting and also tried to restore my phone but none of the above things worked.Do you guys have any idea what should i do now?

    My iphone 4s is saying NO SERVICE.I tried to put it on airplane mode,tried to reset the network setting and also tried to restore my phone but none of the above things worked.Do you guys have any idea what should i do now?

    Hi sunnylordz,
    Thanks for using Apple Support Communities. Based on what you stated, it sounds like you have no service on the iPhone. It looks like you have already done some troubleshooting. There is one step you did not mention trying that i think is worth trying. 
    If you see No Service in the status bar of your iPhone or iPad - Apple Support
    Remove the SIM card. If the SIM card is damaged, worn, or bent, or if it's too big or small for the SIM tray, contact your carrier for a new one. Then reinsert the SIM card.
    Cheers,
    Mario

Maybe you are looking for