845PE Max2 RAID with 2 80 GB Harddisk from different Manufacturer
sorry for my bad english first
i have a 845PE Max2 and i want to create a RAID 1 System with my 2 Harddisks. I have a Western Digital 80 GB (7200, 8MB Cache, UDMA/100) and a Seagate 80 GB (7200, 8MB Cache, SATA/150).
can i create a RAID with these 2 harddisks or do they have to be absolut identical?
I have two drives from different manufactures in a raid configuration and it works ok as long as they are the same size.
However it is not a RAID 1 configuration it is a RAID 0.
RAID 0 - combines 2 drives as 1. in my case 2 x 30Gb drives became 1 x 58 Gb drive.
RAID 1 - needs 4 drives the same it would combine 2 drives as above with the other 2 doing the same. The second pair of drives would hold a copy of the first pair so if there was any loss of drive integrity (i.e. failure) the second pair may be used to correct the problem.
As far as I know that is the way it works but please do check around the net for the definitions of RAID configurations
try
http://www.iomega.com/support/documents/11242.html
for definition of RAID 0 and RAID 1.
Similar Messages
-
845pe-max2 raid(ms6704)
Hello all,
I just brought a 845pe-max2 raid(ms6704). I do not want to use the raid-want to use IDE3 & IDE4 as regular IDE's. Is there a jumper on this board to set it to normal or raid? Any help would be so good.
ThanksI was on the forum searching for some tips or tricks for the 845PE Max2 and stumbled into this thread. What a FIND!
I had reservations about setting up a raid configuration, I thought it looked too complicated.
BUT thanks to the great link provided above, it went SUPER!
Zip drives just tend to be bucky on some motherboards, but now I can set the Zip on its own cable, so it can't bother anything else!
Thank you!
Nice work experts! -
845PE MAX2 , RAID and SCSI
Hi, (sorry for my english but i'm french)
I have a serious problem with my 845PE MAX2 BFIR. When i connect my Adaptec 29160 SCSI card, i can't use the raid controler. It seems to be identical with 2940 card. I tried all the PCI connectors, but same problem.
It seems that Promise fastrack133lite is a Promise fastrackTX2000 controler, and at Promise website, they post a new bios :
FastTrakTX2000 BIOS 60.96KB 2.00.0.28 Windows
2002/11/13
Description Fixes EDBA problem on some motherboards. Symptoms include not being able to boot to the boot device (floppy, CD, etc.). This symptom may be more prevalent if there is also another controller, such as a SCSI adapter, in the system.
but it's impossible to flash it, MSI has to integrate it in the mobo's bios.
Please help !
Thanks.http://www.msi.com.tw/html/support/testreport/6704/scsi.pdf
appears it was tested with version b
any idea what differences are as scsi is not a topic im up on -
CK11n with activity prices from different plan versions
Hello,
We are looking for a simple & practical way to calculate a standard cost estimate for a material using activity prices from different CO plan version.
In the valuation variant of the costing variant the CO plan version is determined from where the activity prices are taken, eg version 0
So, we want to cost the same material using the activity prices of a different plan version, eg 90, or 91 ... but without using a different costing variant per CO plan version(so without having to create/customize a separate costing variant per CO plan version)
Is this possible?
Can we use costing versions in this respect?
Many thanks
AlainHi,
Thanks for quick feedback ... but how do you assign this valuation variant in the costing version... ?
Can you enter is in CK11n? or what transaction needs to be customized?
Thanks, Alain -
Need help with master detail from different datasets
I have xml data from three different datasets that I want to use in a master detail region.
So initially, a list of model codes is displayed. When the user clicks on a specific model, the model inputs appear in the detail region. One of these inputs is a list of map units. I also want a real name description of the map unit to be displayed. It's working for one map code, but not for all of them.
My question is: "How do I get the description to disply for each of the map codes?"
Here is my code:
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<script src="/SpryAssets/xpath.js" type="text/javascript"></script>
<script src="/SpryAssets/SpryData.js" type="text/javascript"></script>
<link href="/SpryAssets/SprySpotlightColumn.css" rel="stylesheet" type="text/css" />
<script type="text/javascript">
var DSpresence = new Spry.Data.XMLDataSet("/SpeciesReview/Copy of tblSppMapUnitPres.xml", "dataroot/Copy_x0020_of_x0020_tblSppMapUnitPres");
var DSancillary = new Spry.Data.XMLDataSet("/SpeciesReview/ModelingAncillarywname.xml", "dataroot/Sheet1", {sortOnLoad: "CommonName", sortOrderOnLoad: "ascending"});
var DSpresence2 = new Spry.Data.XMLDataSet("/SpeciesReview/Copy of tblSppMapUnitPres.xml", "dataroot/Copy_x0020_of_x0020_tblSppMapUnitPres[strSpeciesModelCode='DSancillary::strSpec iesModelCode']");
var dsMUDescription = new Spry.Data.XMLDataSet("/SpeciesReview/tblMapUnitDesc.xml", "dataroot/tblMapUnitDesc");
var dsMUDescription2= new Spry.Data.XMLDataSet("/SpeciesReview/tblMapUnitDesc.xml", "dataroot/tblMapUnitDesc[intLSGapMapCode='{DSpresence2::intLSGapMapCode}']");
</script>
</head>
<body>
<div style="width: 100%">
<div id="Species_DIV" spry:region="DSancillary DSpresence dsMUDescription" width="50%" style="float:left">
<table id="DSancillary">
<tr>
<th>Species Code</th>
</tr>
<tr spry:repeat="DSancillary" "DSpresence" "dsMUDescription" spry:setrow="DSancillary" >
<td>{strSpeciesModelCode}</td>
</tr>
</table>
</div>
<div id="Species_Detail_DIV" spry:detailregion="DSancillary DSpresence dsMUDescription" style="float:right; margin-top:20px; width: 40%">
<table id="Species_Detail_Table" >
<tr width="100%">
<th style="font-family:Verdana, Geneva, sans-serif; font-size:14px; background-color:#CCCCCC; font-weight:bold">Modeling variables used for {strSpeciesModelCode}</th>
</tr>
<tr>
<td spry:if="'{memModelNotes}' != ''">Hand Model Notes: {DSancillary::memModelNotes}</td></tr>
<tr>
<td spry:if="'{DSancillary::ysnHydroFW}' == 1">HydroFW: {DSancillary::ysnHydroFW}<br />Buffer from flowing water: {DSancillary::intFromBuffFW}<br />
Buffer into flowing water: {DSancillary::intIntoBuffFW}
</td></tr>
<tr>
<td spry:if="'{DSancillary::ysnHydroOW}' == 1"> Buffer from open water: {DSancillary::intFromBuffFW}<br />Buffer into open water: {DSancillary::intIntoBuffOW}</td></tr>
<tr><td><br /></td></tr>
<tr><th>Mapcode:</th></tr>
<tr spry:repeat="DSpresence">
<td spry:if="'{DSpresence::ysnPres}' == '1'">{DSpresence::intLSGapMapCode}</td><td spry:if= "'{DSpresence::intLSGapMapCode}'=='{dsMUDescription::intLSGapMapCode}'">{dsMUDescription: :strLSGapName}</td>
</tr>
<tr><td><ul>
<li spry:repeat="DSpresence" spry:if="'{DSpresence::ysnPres}' == '1'">{DSpresence::intLSGapMapCode}{dsMUDescription::intLSGapMapCode}</li>
</ul></td></tr>
</table>
</div>
</div>
</body>The best way to do this is to use xPath filtering. This http://labs.adobe.com/technologies/spry/samples/data_region/FilterXPath_with_params.html example will give you the general idea.
The example uses a URL variable but there is no need for that if you use a procedure similar to
function newXPath(cat){
DSpresence.setXPath("dataroot/Copy_x0020_of_x0020_tblSppMapUnitPres[strSpeciesModelCode=' {DSpresence::strSpeciesModelCode}']");
DSpresence.loadData();
The function can be triggered with an onclick event placed on {strSpeciesModelCode}
Gramps -
Concatenate tables with same name from different servers - CR2013
Hello,
I need some help. I need data from 2 tables with the same name on different SQL servers thru an ODBC connection. When I try to get the data by adding both to my datasource I get data from one or the other. I have considered creating a view, but not sure how to handle this. Thanks.Hi,
Linked Servers are pretty simple and straightforward, just do a search for the procedure.
I do have an additional comment, though. Depending on what tables you're gathering, I've found noticeable differences in performance when I use a connector to a DB on Server Instance "A" linked to "B" versus Server Instance B linked to A. I haven't determined the circumstances affecting one over the other.
If I'm not happy with speed using a connector A, I try switching to B. I like to use as much SQL code as possible, but you can't get around the connector still being a factor.
Matt -
Matrix with Info Columns from different Table
Hi, how can i manage to have a column in a matrix that doesn't represent a value of the table the other columns are using?
For example, i have a matrix and this matrix has values of the UDT (@Table) and one column contains the projectcode. now i want one column in my matrix to show the project name of the OPRJ. how can i manage that, so that the value of this column in the matrix changes when i change the value of the other column with the project code?
best regards
PhilippHi
1) You can fill the matrix from Recordset.
For example: UDT is [@O01_USERTABLE].
PrjCode foreign key to the Projects table (OPRJ - not exposed through the DI API).
So, if you type correctly PrjCode, you can fetch description using method below.
Dim sSql As String = ""
sSql = " SELECT U.PrjCode AS PrjCode, S.PrjName As PrjName" & _
" FROM [@O01_USERTABLE] AS U, OPRJ AS S" & _
" WHERE U.PrjCode = S.PrjCode"
oRS = SBO_Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
oRS.DoQuery(sSql)
If oRS.RecordCount > 0 Then
Dim i As Integer = 0
oRS.MoveFirst()
While oRS.EoF = False
i = i + 1
oForm.DataSources.UserDataSources.Item("uNr").Value = i ' 1" matrix column for row number
oForm.DataSources.UserDataSources.Item("uPrjCode").Value = oRS.Fields.Item("PrjCode").Value
oForm.DataSources.UserDataSources.Item("uPrjName").Value = oRS.Fields.Item("PrjName").Value
oMatrix.AddRow()
oRS.MoveNext()
End While
End If
2) On ManageDataEvent, call Matrix_FetchDescriptions(...)
Public Sub ManageDataEvent(ByRef BusinessObjectInfo As SAPbouiCOM.BusinessObjectInfo, ByRef BubbleEvent As Boolean)
Dim oForm As SAPbouiCOM.Form = SBO_Application.Forms.Item(BusinessObjectInfo.FormUID)
If BusinessObjectInfo.EventType = SAPbouiCOM.BoEventTypes.et_FORM_DATA_LOAD Then
If Not BusinessObjectInfo.BeforeAction Then
Try
oForm.Freeze(True)
Dim oMatrix As SAPbouiCOM.Matrix
oMatrix = oForm.Items.Item("mtx00").Specific
If oMatrix.RowCount > 0 Then
Call Matrix_FetchDescriptions(oForm, -1)
End If
Catch ex As Exception
Finally
oForm.Freeze(False)
oForm.Update()
End Try
End If
End If
oForm = Nothing
End Sub
' Update column Name
Private Sub Matrix_FetchDescriptions(ByRef oForm As SAPbouiCOM.Form, ByVal iRow As Integer)
Dim oMatrix As SAPbouiCOM.Matrix
Dim oColumn As SAPbouiCOM.Column
Dim oCell As SAPbouiCOM.Cell
Dim oEdit As SAPbouiCOM.EditText
Try
If SBO_Company.Connect Then
oMatrix = oForm.Items.Item("mtx00").Specific
If oMatrix Is Nothing Then Throw New Exception("ERROR: matrix object is nothing")
Dim iNrRows As Integer = oMatrix.RowCount ' iRow
If iNrRows > 0 Then
Dim i As Integer = 1
For i = 1 To iNrRows
Dim sCode As String = ""
Dim sName As String = ""
Try
' Matrix column PrjCode
oColumn = oMatrix.Columns.Item("ePrjCode")
oCell = oColumn.Cells.Item(i)
oEdit = oCell.Specific
sCode = oEdit.Value
sName = GetNameByCode(sCode)
If Not sName.Equals("") Then
' Matrix column PrjName
oColumn = oMatrix.Columns.Item("ePrjName")
oCell = oColumn.Cells.Item(i)
oEdit = oCell.Specific
oEdit.Value = sName
End If
If iRow = i Then Exit Sub
Catch ex As Exception
Finally
End Try
Next
oForm.Refresh()
End If
End If
Catch ex As Exception
' log exception
Finally
oMatrix = Nothing
oColumn = Nothing
oCell = Nothing
oEdit = Nothing
System.GC.Collect() 'Release the handle to the table
End Try
End Sub
To get Name using Code...
Private Function GetNameByCode(ByVal sCode As String) As String
If sCode.Trim.Equals("") Then Return ""
Dim sName As String = ""
Dim oRS As SAPbobsCOM.Recordset
Try
oRS = SBO_Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
Dim sSql As String = "SELECT PrjName FROM OPRJ WHERE PrjCode = '" & sCode.Trim & "'"
oRS.DoQuery(sSql)
oRS.MoveFirst()
While oRS.EoF = False
sName = oRS.Fields.Item("PrjName").Value()
Exit While
End While
Catch ex As Exception
Finally
If Not oRS Is Nothing Then
System.Runtime.InteropServices.Marshal.ReleaseComObject(oRS)
oRS = Nothing
End If
End Try
Return sName
End Function
Note: Matrix_FetchDescriptions() have second argument (iRow As Integer) what may be used to indicate in what row you need to update PrjName column.
May be ItemManagment event when item pressed can be used... Try
HTH
BR
Sierdna S. -
Build a slide show with various photos from different events?
Is it possible to select various photos from a few different events, and then select "Create slideshow"?
How do I select just the specific photos I want for the slideshow, and not load the entire event(s).
Thanks!You can also select one or more photos, then create a new slideshow (Add to->Slideshow->New Slideshow), then open any other Event or album and drag selected photos onto the slideshow's icon in the left panel. You can reorder the slides in the horizontal strip at the top of the main panel when viewing the slideshow.
-
Autosync - Sync Detection Problem with Video/Audio from different sources
Hi,
i've got the following problem:
I'm editing a feature film, where video comes from tape and audio from harddisc-recorder. The clips are combined/linked manually via in-point (slate).
If I cut this video/audio combined clip in the timeline, and move only the audio 3 frames to the right, sync detection informs me correct about the out of sync problem (3 frames). BUT: If I split the audio file in two pieces, the left clip still has the "out of sync" info in the timeline and remains "linked" to the video, but the right clip doesn't show his relation to the video anymore !!!
Is this a bug ?
Because, if I use video and audio from one "media-source", ex dv, the sync detection in the timeline is working correct with the above example ?
I'm lookin' for a similar way to sync clips like autosync with media-composer and thought combine audio and video clip to a new combined clip should do this....
Thanks for help !I have my waveforms back! Thank you SO MUCH! I looked everywhere and just couldn't find a setting for this.
As for the sync, I guess that's OK - it's no worse than what I had before (and with the waveforms back, less of an issue to do manually). Would be nice if they'd add the ability to offset the audio track in the Modify Clip screen at some point (and it would open up the multi-cam sync feature to more users), but I can cope without for now.
Thanks again for your help. -
845pe-max2 raid(ms6704) RAID!!!!
Anyone can help me? ;(
I have a a ms6704 - and i want to use IDE3 & IDE4 as normal IDEs Drive.
Please it's urgent.
Thanks
Johnhttp://www.msi.com.tw/program/service/forum/index.php?threadid=292&boardid=16&styleid=1
principals in there should work for any raid card -
How do I use Aggregate formulas with multiple measures from different tables?
I have three measures:
Cash - this sums the £ column in my 'Cash' table.
Online - this sums the £ column in my 'Online'
table
Phone - this sums the £ column in my 'Phone'
table
How do I now do aggregate formulas that combine this three measures, for example:
Find the MIN or MAX of the three measures
Average the three measures
I have worked out how to use simple aggregation like add, subtract etc through the CALCULATION formula, but doing the average or MIN/MAX does not work.
Thanks.Hi, thanks for the suggestions.
Re: Julian
I had thought about this method, unfortunately it is not always three measures so this doesn't work.
Re: Tim
I was not aware of the APPEND formula however I will definitely give it a try and report back - I can see this one working.
Re: Michael
Apologies, I have never found a an easy way of simulating some of my issues since it would mean creating a new power model and establishing quite a number of relationships. I definitely see the benefit when posting on the forum since it makes my issue far more
accessible, unfortunately when I've posted before I've generally been racing against time and not had time to prepare this anonymised data. Is there a quick way of doing it? -
Mixing RAM from different manufacturer's?
Hi
i currently have 2.5 gig of ram that was installed by apple, and i am looking to add matched pair of 1 GB to give me 2 more gig of ram, and 4.5 total
can i mix my standard ram with samsung ram? i dont want to buy and have it not work, also there is same ram on the site with slightly different specs for less, a, i better off going with that?
thanks in advance!
http://eshop.macsales.com/item/Samsung/3200DDRSAM2P/Hi, and a Warm Welcome to the Power Mac G5 Forum!
Well - the G5 RAM specs are here
http://docs.info.apple.com/article.html?artnum=86414
Some of the Apple Original G5 RAM was Samsung, apparently.
You will not go far wrong purchasing RAM from OWC with their "Lifetime Advance Replacement Warranty"...
Personally I have never had a problem with Crucial
http://crucial.com/store/mpartspecs.aspx?mtbpoid=1D1DFB01A5CA7304
who have a similar guarantee. And the parent company of Crucial - Micron - were also suppliers of Apple Original G5 RAM, apparently. Good Luck. -
Hi,
I´m going to install an extra Harddisk in my computer with
a 845PE Max2 MoBo.
Is there any differances concering perfomance, depending on various configurations - Master/Slave/IDE1/IDE2 ?
I will connect 2 HD and 1 CD and 1 CD/RW.put it slave to main hard drive
-
Oracle Portal Development from different geographic locations
Hello,
Have anyone done the development with Oracle Portal from different geographic locations, our customer want to know is there a way we can develop Oracle portal application from different geographic locations and merge it one place.
One reason is because the portal is in the database. If you have two separate groups work to build a single portal, it reason that each team would have their own installation. When these two groups are done (or periodically), the development efforts must be merged into the final complete portal. Is this possible using Oracle Portal (merging portal installations)?
Second reason is that typically other systems owned by the customer are exposed or accessed by portlets. Access to these portlets would probably be required for development. If nothing else then for unit testing.
How do you typically see off-shoring done with Oracle Portal, if at all? Or am I incorrect in my thinkings. How does the Portal meta-data stores the portal configurations is it possible to merge different portal schema into one and make it the main portal environment.
Please let me know if anyone successfully done this. Your comments would be greatly appreciated.
Thanks,
KathirAlready replied in Oracle Portal Development from different geographic locations
Cheers,
Pedro. -
My Pc doesn't wake up from standby (845PE Max2)
Hi,
I have Windows Xp Pro installed and when I stand by my computer I can't get it to wake up successfuly. The PC is powered up when I press the power button, but I don't get any video signal or USB power (both my keyboard and mouse are connected to USB ports, and they don't get power after waking up).
Any clue on this? What should I do to make it work?
And could it have something to do with installed software? Besides the drivers for the hardware on the end of this message, I have Norton Internet Security 2003 (antivirus + firewall), Nero ImageDrive and Daemon Tools (these are tools similar to VirtualCD, thus making new cd/dvd drives available on my system).
Best regards,
Norberto Henriques
hardware:
Intel Pentium 4 2.4B C1
MSI 845PE Max2 FIR / 1x512 Mb DDR333 Kingston
HDD 2x WD 80 Gb 800JB/ WD 120Gb 1200BB
MSI GeForce Ti4200 G4Ti4200-VTP 128Mb
DVD Toshiba SD-M1712 / CDRW TEAC W540E
Creative Sound Blaster Audigy 2
Pinnacle Studio DC10+Hi,
I own a Chieftec full tower black case that came with a 360W power supply from Chieftec (with PFC). I know this isn't a "top of the line" power supply, but I think it is enough to handle my system.
Besides the power issue, what could influence this? I know that my PC handled well the standby feature, but this was before I made some changes (moved a CD burner to the Intel IDE bus and placed a hard drive on the Promise controller, replacing the CD burner).
Best regards,
Norberto Henriques
Maybe you are looking for
-
How to import custom stationery into choices
I'm not sure if I'm doing this correctly. We've created a html stationery template and it's on Safari (for convenience I put it on my top sites) When I want to write an email using the custom stationery, I have to open it in Safari, press command I,
-
How to give two spaces after new order in alv
hi my issue is after every new order number they need two blank spaces, i know the procedure of giving new page for every new order but they need only two blank lines. (This is in ALV List format). second thing is how to give footer thanks
-
Could someone explain to me in a basic way .How to rename the merged channel names in the attched VI. By default they read Untitled , Untitled_1 , and so on. I want to give them logic names like Coil Temp, Battery Temp etc... Thanks ---------------"L
-
Can't do a cloud download after purchasing book on iPhone
Have downloaded book to iPhone want to put on iPad as well, when attempted get mssg that I've already purchased book and just need to download which when I click download button nothing happened at first after several attempts it now shows it as pau
-
InfoCube 0PM_C04 is not available
Hi All, I am trying to install 0PM & 0QM business content & when I try to install 0PM_C04 it gives a mesage that "InfoCube 0PM_C04 is not available". We are on BI 7.0, BI_CONT 703. Any idea/comment on what could be the reason? PK