848P Neo-LS [help configuring ...]

I just set up a 848P Neo-LS
support for:
800mhz FSB
400mhz DDR
I installed a P4 2.8c which should be able to run at 800mhz
I don't feel the mainboard manual give enough detail to explain how to set up the bios and when i view "CORECENTER" it shows my pc running at 200mhz FSB. and when i click where it shows this on the right pannel, what's with the 200mhz x 14.0=2807 mhz?
I just want to make sure my pc is running at 800mhz FSB and my 400mhz pc3200 ram i have is running optimally as well.
ALSO, in the bios it shows the DRAM, PSB 400MHZ, PSB533 MHZ AND PSB800MHZ.
IF PSB is stands for another bus what bus is it and y do the equivalants to 400, 533 and 800 only = 100-344mhz, 133-500mhz and 200-500mhz respectively?
ANY help would be appreciated, i know from viewing this forum that there are MANY of u out there that are EXPERTS with MSI boards and setting them up.
thanks for any help
IRISHHUNK
(St.PAtricks day's commin up, have fun

And PSB (Processor Speed on BUS) is Basically the same as FSB (Front side Bus) only it is a different Name, So set your PSB to 800 and you should set your Memory to 400MHZ or "Auto" if you have this Choice.You may also come across something called PBS (Processor Bus Speed) which is Actually the FSB Divided by 4 so it is PBS X 4 = FSB in your Case PBS=200 X 4 = 800MHZ FSB or PSB.....But we tend to use FSB in this Forum so as Everybody does NOT get Confused .........Sean REILLY875

Similar Messages

Overclocking p42.66 (c1) on 848P Neo-LS help!!!

hi i am looking to overclock my p4 it but i dont know what settings i should have in the bios.
here is my system:-
INTEL P4 2.66GHz (C1 STEPPING)
AKASA P4 BLUE LED HSF (UPTO 3.6GHZ)
MSI 848P Neo-LS
1GB SAMSUNG DDR333 PC2700 CL 2.5
ABIT SILURO GF FX5600 ULTRA OTES 128MB DDR 400/800 (FLIP CHIP)
80GB SAMSUNG HD 7200RPM
550W QTEC PSU.
i have updated the bios rev. to 1.2 (latest).
also i have 7 80mm blue led akasa fans installed in clear case for controlled air flow.
any help in this matter would be great.
if you need any more info i would be glad to help.
cheers

read this guide:
https://forum-en.msi.com/index.php?threadid=40413&sid=

848p neo problem HELP!

i recently bought a 848p nero mother board updated all the drivers for everthing on my cpu and iam haveing problems useing my usb lazer mouse's, when i insert the mouse into the usb port the mouse doesnt move but the lazer is flashing.. a buddy of mine used his usb port harddrive and it worked but the mouse went crazy a few times and went scroling all over the screen. so if anyone knows why my optical mouse's arent working can you please tell me why.

i went into bios and enabled them.. but that hasnt helped... and another thing.. i use ventrilo to communicate over the net with my clan and for some reason they cant hear me but they can hear the music iam listening to...

848P Neo-V Bios on chip IDE Configuration

Can someone advise me on the proper setting for the 848P Neo-V IDE configuration when using only IDE devices. I am not using any SATA devices. Should I be using the Legacy Mode or the Native Mode for the On-Chip ATA Operate Mode ?
I am aware when using any SATA devices that Native Mode is the correct setting. When just using IDE hardrives and IDE DVD-Roms should I set this to Legacy ? There is no real clear rule to this as I have searched all over the Internet and can't seem to get a definitive answer. Any advise is appreciated.

You should find alot of answers in this forum. It is similar to the 865PE and 875P Neo setup.
Native Mode
SATA Only
PATA Keep Enabled
PATA Channel Selection (Both)
Set SATA as RAID (No)
The rest as defaults.

[848p Neo S]please Help Me

Hi
Please Help Me
My Pc is Very Slowly
*** any person enterd her replay me please***
EXAMPLE:-
TRANSFEAR 4 GB FILMS IN 10 MINUTES
Component
MOTHER BOARD MSI 848P NEO S
PROCESSOR INTEL P4 2.6 CASH 512 PATH 800
RAM 256 DDR PATH 333
VGA 128 ATI RADEON 9200 SE
H.D 80 GB WESTREN DIGITAL 7200 RBM
SOUND CARD 128 DIGITAL CREATIVE
FAX INTEL
PLEASE HELP ME
WHAT CAN I DO ?
THANKS

Hi,
I would say 4.9Mb/s on such a large file is good....
1GB = 1024Mb
1Gb = 2.5 mins to transfer
Therefore 4.9Mb are transferred every second...... If you are looking for the 100MB/s that's PEAK and not actual......
Del

CL3 Memory wont work on Intel 848P Neo Mainboard? any help?

Hi,
I purchased Kingston DDR Ram recently and put it into my computer. It worked fine but sometimes I start computer up and it comes up with a message saying something is wrong with the memory timings. I dont think it is configured properly.
In the BIOS there was an option to "CONFIGURE DRAM TIMING BY SPD" and i set that on ENABLED. If i set it to DISABLED then there are other options that I have to set.
These options are as follows:
1. CAS# Latency [Options 2 or 2.5 Clocks];
2. RAS# Precharge [Options 2, 3 or 4 Clocks];
3. RAS# to CAS# Delay [Options 2, 3 or 4 Clocks];
4. Precharge Delay [Options 5, 6, 7 or 8 Clocks];
5. Burst Length [Options 4 or 8 Clocks].
These are the 5 settings i can modify and in the "[]" brackets are the options i can select from for each one. Could you please tell me how I am to configure this in order for the memory to work. The Ram voltage is set at 2.6v. The CAS# Latency only allows 2 or 2.5 clocks so im not sure if thats the problem or not.
The specifications of my computer as as follows:
RAM - Kingston KVR400X64C3A/1G 1GB PC3200 CL3 184
Motherboard - MSI 848P Neo (MS-6788 v1.0)
Motherboard BIOS - A67991MS v1.0081203
Motherboard firmware - V1.0 initial release
CPU - Pentium 4 2.53Ghz
Regardless of the settings I have done so far, if it works past POST and loads windows...after sometime it randomly resets. Any idea why this is the case? I suspect its the CAS Latency. The manual says you can select 3 Clocks but i dont see that option, just 2 or 2.5

The Kingston Site is not always correct or to be more precise: it does not state the operating conditions under which DDR-400 is possible on this mainboard. In this cases the problem is not the modules as such (they are able to run @DDR-400) if they are put into a system that supports that.
In your case the problem is the mainboard's chipset which can only make the memory run @DDR-400 when an FSB-200-MHz processor is installed. You are currently using an FSB-133-MHz processor. With such a processor, the maximum memory clock speed that the system can run at is DDR-333. I just checked the Intel Datasheet for the 848P Chipset. That is also the reason why all DDR-400 modules mentioned in the official MSI Memory Test List for this mainboard were tested with an FSB-200-MHz-CPU installed.
The only thing you can do to get aroung this "problem" is to install a supported FSB-200-MHz-processor.
Quote
Also, when i look at my motherboard manual, it shows option for 3 as CAS latency but in reality when i check the bios its not there (which im assumin is reason y it wont work).
It would probably be there once a processor is installed that will enable higher memory clock speeds than DDR-333. However, the actual CAS latency is only of secondary importance here. The main question is why DDR-400 is not possible (which would automatically yield a CAS Latency of 3 by settings the values in the corresponding SPD Profile). And as I said: DDR-400 is only possible with an FSB-200-MHz-Processor.
With your current configuration, the highest possible memory speed is DDR-333 @2.5-3-3-7. In case that runs fine & stable everything is working as it should.

848p neo problems PLEASE HELP!!!!

just got a new 848p neo, celeron 2ghz/400, and a stick of 512 2700... put it all in my computer, hooked up the hard drive cd rom etc.... and booted up, boots up but when windows loads it stops halfway thru the windows startup screen and shows a blue screen and says "inaccessible boot device"... any ideas?? a litte background.. got windows 2000 and went from a celeron 400 with generic motherboard to the new stuff... thanx all.......
Power

If this hard drive had windows installed with the old motherboard it is not going to boot with the new one. You need to do a fresh install.

848P Neo-LS Fan Control

As said - no control of the damn fans (Case/CPU) on my 848P Neo-LS. On the CoreCenter the button lits up on mouseover, but when pressed, nothin' happens (as said in manual, press to toggle user/auto modes for fan control).
Also CoreCenter doesn't show the Case fan's speed, but Northbridge (NB fan) fan's speed, which is obviously 0. Also NB temp is N/A. Also +12V is N/A. Also the FSB stays always at 101 Mhz, not 100. No overclocking done.
Today upgraded the CoreCenter to the most recent vers (1.7.0.0.), and the button doesn't lit up anymore...?
When I installed SpeedFan 4.17, it allows me to control the Case fan's speed from 2300 - 2700, but nothing more. Interesting.
CPU - Celeron 2.0
RAM - 256 MB Kingston
CPU Fan - OEM intel fan A80856-003
Case Fan - MJ 802512
Both fans with speed sensors, of course.
Should I update the bios?
Help somebody!

To be sure I opened the case and stopped the fans by hand (I don't use the corecenter prg - piece of crap), to see that i have mistaken both fans (in SpeedFan prg). The one who varies by 400 rpm is the Cpu fan.
Doooh.
The bios health screen doesn't show +12V at all - just aint there...
The MSI tech support sez - flash the bios, and if anything doesnt change, the CoreCell chip has gone (faulty, whatever).
Flashed the bios (1.0 - 1.9 now). No changes.

848P NEO-LS SATA (Native Mode) - Cant Install WinXP

Okay guys -
I have a 848P Neo-LS which seems to be somewhat rare on this site in the support sections.
Its a brand new board and looks very fancy. I have a lot of experience with PC's as I repair them on a daily basis however this is my first adventure into the land of SATA.
To go with my lovely new MSI motherboard I have purchased a 120GB SATA Hard Disk.
In the BIOS for the motherboard under "Intergrated Peripherals -> On-Chip IDE Configuration" I can choose to operate the On-Chip ATA in either legacy or native mode. According to the manual that came with the board for Windows XP, I should use Native mode (which is exactly what I want as it allows for 6 ATA devices, as opposed to only 4 with legacy mode - im using a mix of SATA and P-ATA devices).
When set to Native mode and booting the Windows XP Pro installation CD, it gets so far then I get a blue-screen warning me about a possible harddisk problem?
But if I set it back to legacy mode and boot the Windows XP Pro installation CD, everything goes through okay and I can choose to begin installing XP if I wish.
However I want to run in Native mode as this will allow me the mix of SATA and P-ATA Harddisks that I want to run. The manual provided with the MSI board also instructs me that this should be possible.
Its not working - what is wrong???? From my knowledge of NT based operating systems im guessing I need to press F6 during the installation CD boot sequence and insert a driver disk for the SATA controller? Although it seems strange that this works in legacy mode - perhaps I have answered my own question here and that isnt the problem?
Or maybe I need a BIOS update, or maybe something entirely different????
Can someone please answer my question as I would love to get using this wonderful new PC.
Thanks in advance for any advice.
Delirum Sky

You don't need to install any SATA drivers for your board. I suspect a compatibility issue with the HDD or on of the other SATA/IDE devices you have connected. I would do the following:
Search the Maxtor site for common issues with your model#
Install XP in legacy mode and then switch to native mode as suggested above. I have switched back and forth between modes with no trouble.
If you still get problems,
1. Update to latest BIOS if one is available. Most new Bios'es on the newer boards include fixes to compatibility issues with SATA devices and memory.
2. Try installing XP with only the HDD and a generic CDROM or CDRW attached. If this works, install the other devices back one at a time and test to rule them out as the culprit.
With a recent Bios and your setup I would set On-Chip Config:
Native mode
SATA Only
Keep PATA active-Yes
Both channels
Leave rest at default.
Hope you get it working.

Problems with adding 1Gb memory to 848P Neo

I have had an 848P Neo since February now, with only 512Mb, but seeming as some games and applications I have been running are now taking 512Mb as a minimum, I decided to buy another stick of 512Mb PC2700 333Mhz DDR to take me up to 1Gb. But I struck a problem.....
With both sticks of memory in the machine, the computer fails the memory 'POST' test on reboots (not boots from power off, but when something makes it reboot. ie: BIOS or WinXP). When I do get into Windows, the Core Centre utility acts weird too. It locks up the whole machine, whether you are trying to 'restore' it, or adjust the FSB. It won't even shut down or Ctrl-Alt-Del with it (this is surprising as I have never had to turn off or reset it via the case, as all lock ups have been recoverable).
With either of the sticks in on their own, it works fine. eg: Stick 1 in DIMM 1 or 2/Stick 2 in DIMM 1 or 2. But when they both go in at the same time I get problems. Both sticks are of the same CL according to the Everest System utility.
I have been getting help from my magazines forum, but they seem to have hit a dead-end too. Thread is here.
I would also like to add that I don't think it can be because one stick is Kingston (I think) and the other PNY, as I took the Kingston out of my second comp (same memory) and it still wouldn't work.
I hope I can get this fixed soon.

How do you up the 'VDIMM'? lol.
I don't think it is a mixing prob, as I took the other stick from my other computer (all the numbers on the memory chips are exactly the same, except it is a green stick instead of blue), and the problem still existed.

848p Neo

Can any one help me I have just bought MSI 848p Neo motherboard and keep getting
Pci fast ethernet controller v2.11 (001205)
PXE-E61: Media test failure, check cable
PXE-MOF: Exiting PXE Rom
Cant get my head around the problem. Thanks Keith

Disable "boot from network" or similar in the BIOS.
Moan Guide

848P Neo-S Drivers

Hi, I've both a mother board 848p Neo-S , I've install al correctly but I've lost the drivers cd-rom, so i haven't sound !
In MSI Homepage http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=493 i have downloaded the win xp service pack (as they indiques) but the sound is not here yet.
Anyone can help me?
Thanks

Please read and provide information requested in Moan Guide

MSI 848P neo-V

my love:
MSI 848P NEO-V
CPU celeron 2,4Gh bus 533
Ram 512Mb
HDD seagate sata 80Gb
AGP Asus V9400 X
today, i make a ghost file with nortonghost ver 7.0, there's strange. Ghost speed just about 100Mb/Min ( same specification with ASROCK is 400Mb/min) . I don't know why, i think it maybe come from Cmos setting. Mod and ACE please help me.thanks in advance

thank you, i've just enable it, i will check later, there is another problem, i just bough a CDRW, i install into my computer, but my computer doesn't analize, it looks like nothing install,my computer only analize my old CD, if i take out my old CD then my computer "see" my new CDRW and i use normally. Please help me, i need to use both CDs.thanks
note: i set master for my old CD and slave for new CDRW.
one more thing, onchip controller ATA(s) have two selections, one is lagacy mode,one is native mode, please explain what different between them??

MSI 848P Neo Series MS-6788 Model

Hi,
I'm new to building PCs and I have just built a P4 2.8GHz 800FSB Machine with an 848P Neo Series motherboard.
I have a few issues:
I cannot use a PS2 mouse it simply will not work.
With my PS2 keyboard, turning on num lock or caps lock causes the PC to lock up.
Is there some sort setting in the BIOS I need to change or is the board faulty?
Another issue I had which has now magically fixed itself - when I turned the pc on, I had to turn num lock on and then off to get the monitor to come off standby and to get the pc to start booting - any ideas?
Could you please help with with these problems as I don't have long to return the motherboard if it is faulty.
Thanks in advance

Hi Maggioni,
Look on side on PSU.....somewhere the will be the different "Rails".... list 12V,3.3V,5V, in AMPS. IE- 12V+ = 20A etc.
Hmmm, as for Keyboard.....is it a standard 105 or 102? Maybe, it is an enhanced with extra keys? Wireless or Corded. (If wireless....try changing the batteries)
Also try changing keyboard....borrow or buy a budget one.
Del

848P Neo-V

Hello, I've just bought a mainboard MSI 848P Neo-v, Intel P4 3.0Ghz Prescott, and a PowerColor Radeon 9800 Pro 128MB. My problem is that all 3D games gets all messed up, and its getting worser the more you play, dots and stuff. I´ve tried everything i think, changed Agp 4x/8x, fastwrite, changed position of power to graphic card, new/old drivers, bios etc. but nothing works. When i istall PCalert4 it gives me a warning that 3.3V is down under 2.8V, and when i istalled corecenter it tells me the same and that vcore is up 1.7 - 1.8. Is there a way to alter does values? Like boost the 3.3V up.. I think it has to do with the graphic problem, does anyone know? Please help!

Pentium 4 3.0GHZ 1MB L2 Cache (800Mhz FSB) Prescott
MSI mainboard 848P Neo-V http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=596
PowerColor Radeon 9800Pro 128MB AGP 8X http://www.power-color.com/R98-PC3F-128BIT.htm
DDR 512 MB (2x256 266Mhz) Memory
2x Harddrives (60 GB/100 GB)
And the PSU 350W +3.3V - 20A
+5V - 30A
+12V - 15A
That might be the problem, do you think

848P Neo-LS [help configuring ...]

Similar Messages

Maybe you are looking for