[848p Neo S]please Help Me

Hi
Please Help Me
My Pc is Very Slowly
                                  *** any person enterd her replay me please***
EXAMPLE:-
TRANSFEAR 4 GB FILMS IN 10 MINUTES
Component
MOTHER BOARD MSI 848P NEO S
PROCESSOR INTEL P4 2.6 CASH 512 PATH 800
RAM 256 DDR PATH 333
VGA 128 ATI RADEON 9200 SE
H.D 80 GB WESTREN DIGITAL 7200 RBM
SOUND CARD 128 DIGITAL CREATIVE
FAX INTEL
PLEASE HELP ME
WHAT CAN I DO ?
THANKS

Hi,
I would say 4.9Mb/s on such a large file is good....
1GB = 1024Mb
1Gb = 2.5 mins to transfer
Therefore 4.9Mb are transferred every second...... If you are looking for the 100MB/s that's PEAK and not actual......
Del

Similar Messages

  • 848p neo problems PLEASE HELP!!!!

    just got a new 848p neo, celeron 2ghz/400, and a stick of 512 2700... put it all in my computer, hooked up the hard drive cd rom etc.... and booted up, boots up but when windows loads it stops halfway thru the windows startup screen and shows a blue screen and says "inaccessible boot device"... any ideas?? a litte background.. got windows 2000 and went from a celeron 400 with generic motherboard to the new stuff... thanx all.......
    Power

    If this hard drive had windows installed with the old motherboard it is not going to boot with the new one. You need to do a fresh install.

  • K8N Neo FSR, Please Help a Newbie

    Hey all,
      I'm new to these forums and was wondering if I could get some help or advice.  I currently own an athlon 64 3200+ newcastle with a K8N Neo FSR motherboard.  I have heard that my mobo is basically a platinum minus the luxury of firewire ports, could I be correct about that?  If so, I went to msi.com.tw website to update my drivers and could not help but notice that K8N Neo Platinum has two more updates that whats offered for my FSR, those being CoreCenter 1.7.0.0 and DigiCell 1.03.00.00.  I find corecenter to be useful and am wondering will these two updated versions of the apps work with my FSR, and why would MSI not post the updates in the FSR section.
    Also, my board came stock with bios 1.2 and I loaded up windows sp2 and all the drivers and such and everything seems to be working fine to my knowledge, cool n quiet on with cpu around 994 to 1004 mhz, temp readings from bios and sandra all report 36-43 degrees C.  Does that sound right to anyone, because I'm not a fan of bios flashing, would flashing to the newest official 1.4 be any benefit to me?
    One last thing, I encountered a problem with a creative usb mouse and do not know the source of the problem or how to solve it, it is the optical mouse lite with a blue scroll wheel and operates fine, but after I shutdown my computer the mouse light is still on, is that normal or is there anything I can do about it besides shutting down my power supply everytime I turn off my computer.
    Sorry for the loads of questions, if anyone actually reads this please provide me some input/insight.  Thanks in advance.
    System specs:
    A64 3200+ Newcastle Year 04 Week 26
    MSI K8N Neo FSR Bios V1.2
    512 MB PQI Turbo Black Memory
    Aspire 500 W psu, 12v = 34 amps
    Maxtor 60 gig IDE hd
    52x32x52 cdrw

    If you look at the prduct page for the K8N Neo FSR, and choose the BIOS link it brings you to page:
    http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=571&kind=1
    Which shows the BIOS' available for the K8N Neo FSR.  Notice that 1.3 and 1.4 are available and that the K8N Neo FSR is considered to be a MS7030 which is the same model number of the K8n Neo Platinum.  From this I surmise that you can use the same BIOS and drivers and all that the Platinum uses and everything should work fine.
    RB

  • Veteran NEO users please help me analyze my current situation: IS my system STABLE?

    Alright, after some woes with my CDROM, I believe my system is running at 100%.
    Below are the final specs that will not be changed:
    AMD 64 3400+ 1MB L2 Cache CG
    MSI K8N NEO Mobo (1.1Bios 2 X 512 DDR PC4000 Crucial Ballistix
    RAM Setting in Bios is all Auto w/o aggresive timing (2.5.4.4.6) 2T
    CnQ off, DOT off
    Storage:
    15.3K 73GB Cheetah U320 SCSI
    80GB Maxtor 7.2K RPM IDE
    HP dvd400i
    PCI card:
    Audigy 2 ZS
    LSI 21320 SCSI Controller
    Adaptec USB2.0 PCI Card
    Video:
    ATI AIW 9700pro CAT 4.7
    Cooling:
    2 80MM Outake
    2 80MM Intake
    Alpha PAL 8150T for CPU Cooler
    1 80MM for NB
    Power:
    Enermax 450W PSU (removed the 80mm fan and replaced the 92MM fan with Nexus Quiet Fans)
    Here are my reports:
    The bios reports reports my CPU temp to be 65-69C and the mobo temp to be 45. Do you pple think its a bug? My HS feel slightly warm to the touch most of the time.
    I installed AquaMark and ran it at the highest setting for 4 loops w/o any crashes, errors or BSOD
    I ran Prime95 Torture Test for 12 hours without a single error.
    My Questions: Are those a good indicator that my system is @ 100% stability? Under heavy stress? I left my system on for the past 2 days w/o a single crash or BSOD, reboot etc.
    I've seen pple here with lockups during 3D gaming(Other than the PB issue) and general lockups now and then. Before I proceed to OCing and Imaging the drive, i want the re-assurance that my current setting 100% stable and no hardware is defective.
    Please share your opinions..thanks alot!!

    Quote
    Originally posted by Finfloyd
    This freeze will occur every 4-6 minutes unless you change the pb_sleep variable from the default 60 to 500. If you do this the freezing will happen every 20-25 minutes.
    I tried the sleep thing with RTCW and it didn't seem to make much difference, maybe slightly longer between freezes, but not really noticable.
    I used another gart driver (4.36 I think) and the freezes only last about half the normal time (normally the screen would freeze and the sound would loop 4 times, with this driver it only loops twice). It was part of a driver pack, I got it from here:
    http://www.station-drivers.com/page/nvidia%20nforce.htm

  • Pny verto 6800 and neo platinum =( please help

    Hi,
      I have the following:
    k8n neo plat
    a64 3200+ newcastle
    pny verto geforce 6800 128 mb w/ 66.93 drivers
    512 mb pqi turbo memory
    aspire 500w psu w/ 34A on 12V
    maxtor 60 gb hd
    microadvantage 5232 cdrw
    microadvantage 8x dvdrw
    floppy
    I just got the 6800 and put it in today.  Everything set up fine and the first game I ran was NBA LIVE 2005 which had jagged edges so I turned on the AA/AF to 4x and 16x, that solved the jagged problem but the team logos now appear blurry.  The second game I tried was DOOM 3 and boy oh boy was it a disappointment, it was extremely laggy even on 1024 setting!!  The third game was NFSU 2 which was smooth but I'm not quite sure that the sky and concrete are supposed to be blocky squares, any ideas?  I am having lots of trouble.
    I tried AGP fast writes off and auto in the bios, no difference.
    Any solutions or suggestions?  Thanks in advance.

    may find some clues here 6800 cards-a no-no with nforce boards
    hope this helps

  • Hi, After I installed Mac Lion, I have problem with the tamil font while typing in Neo Office. Especially with the letters "e-Ex: தெ" and "ai-Ex:தை". Please help me I know its not bug from Apple It shd be some problem in neo.

    Hi, After I installed Mac Lion, I have problem with the tamil font while typing in Neo Office. Especially with the letters "e-Ex: தெ" and "ai-Ex:தை". Please help me I know its not bug from Apple It shd be some problem in neo.

    Is your problem due to the keyboard or to NeoOffice Characters? You have to change probably the font. Not all fonts are supporting all Unicode sets. Which font you have in your NeoOffice set to write Tamil? Try with Arial Unicode MS for example.
    Are the letter e-Ex and ai-Ex right in your posting? If they are right, how you inserted these letters in your posting? By copy and paste or by typing? If by typing, your question is related to NeoOffice. Probably you should reinstall or update NeoOffice? Or switch to OpenOffice?
    marek

  • Neo-FIS2R Front USB Problem! Please Help!

    I have a Neo-FIS2R and a Chieftec/Chenming style case with 2 front USB 2 ports, and one firewire. I have the firewire working fine, and I have hooked up the USB 2 correctly. But it still doesn't work right. I left off pin # 10 that is an extra ground. I can plug in my usb mouse to the front usb and it starts working immediately. I can use either of the ports. But if i change it too many times, it doesn't come on via the front usb anymore, I have to go to the back usb. Now that proves the USB on the front works, but when I try to plug in my  usb memory stick or my memory card reader via the front usb, they never work, the lights on them come on, but then go off.  But they work fine on the back. Please help.

    Dear Bret
    1) What will enabling Legacy Support do? What is it? (sorry i know a n00b question but please answer)
    2) With reference to my original post at the beginning of this threat regarding BlueSoleil - yes its always been like that.  I didnt notice it was seriously wrong until I tested it on my brothers laptop and realised what it REALLY should run like!
    3) Yes the mass storage device was plugged in (i was trying to up the need-for-usb-power in the hope that it would show that when many things are plugged in, the power may be the problem.  But i take it that it wasnt eh?
    4) All the USB Hub's Power Management Properties have under the power management tab check "allow to turn off" clicked already on all of them.  How will your advice in your last post help now.
    5) I should have mentioned this earlier, but regarding my USB Dongle (which as you will know this whole problem is about) sometimes when i stick it into the USB port i get a 'USB Device Not Recognised' Error from windows, however if i take it out and put it in it seems to recognise fine

  • Overclocking p42.66 (c1) on 848P Neo-LS help!!!

    hi i am looking to overclock my p4 it but i dont know what settings i should have in the bios.
    here is my system:-
    INTEL P4 2.66GHz (C1 STEPPING)
    AKASA P4 BLUE LED HSF (UPTO 3.6GHZ)
    MSI 848P Neo-LS
    1GB SAMSUNG DDR333 PC2700 CL 2.5
    ABIT SILURO GF FX5600 ULTRA OTES 128MB DDR 400/800 (FLIP CHIP)
    80GB SAMSUNG HD 7200RPM
    550W QTEC PSU.
    i have updated the bios rev. to 1.2 (latest).
    also i have 7 80mm blue led akasa fans installed in clear case for controlled air flow.
    any help in this matter would be great.
    if you need any more info i would be glad to help.
    cheers

    read this guide:
    https://forum-en.msi.com/index.php?threadid=40413&sid=

  • Please help! K8N Neo 2 Platinum instability problems

    Hi!
    At the fall of last year I bought new computer parts for a new system, the heart of it being a MSI K8N Neo 2 Platinum. Ever since then I have had some instability problems. I tried for a while to fix them, but after a while lost the energy and have just accepted them. Now, however, I want to give this forum a try for help. The instability is irritating and I've been thinking of returning the motherboard.
    The system consists of:
    MSI K8N Neo 2 Platinum
    2 x 512 MB Kingston Hyper X PC3200
    AMD Athlon 64 3200+
    Gainward Geforce 6600GT AGP
    Trust 514DX 5.1 Sound Expert Optical
    120 GB Seagate SATA HD
    NEC DVD-RW ND 2510A
    Zalman ZM400A-APF PSU
    Nothing is overclocked. I also have a Terratec TV-card that I never use.
    I'm running Windows 2000. I have the latest BIOS, 1.C.  I have tried many different Nforce drivers, right now I'm running MEI's nWare Release 06.05a.
    The driver for the GPU is 91.28. Every other driver should be the latest there is.
    The problem I have is that the system freezes up in Windows now and then. The "funny" thing is that I can run Memtest 86 for a whole day, Windows memory diagnostic all the way trough and I can play games (most of the time) for hours. I have also had the computer doing video compression for days and days, so I would say that it seems kind of rock solid. The freezes seems to happen (I'm guessing) when there is lots of communication going on over the southbridge. It often happens when the HD is working and the CPU perhaps get loaded at the same time, or for example if I'm ripping data from a DVD and starts doing something CPU heavy at the same time. That is an almost guaranteed recipe for freezing. Sometimes it freezes when I'm doing "nothing", but I guess it might also be when Windows is swapping, or something.
    I remember reading about problems like this before, with other motherboards. I'm thinking that perhaps some BIOS latency thing could fix it. Perhaps a hacked/tweaked BIOS? Or is the motherboard in fact busted and needs to be returned?
    Any thoughts, ideas or tips are welcome. Please help!
    Thanks in advance!

     
    . . . I'd half to agree 100% on what BAS is pointing out . . .  . . . . . 
    ........also, for kakarocht's reply for the matter as well....
    .....{ my opinion = 450w at least of a PSU, and, >>> what BAS is stating about's the 12v line, YES,  BIG  requirement  for your  system's _ component's of } .......
    mr. Charles
    .

  • K8n neo platinum dead? please help urgent

    Hello everyone... Yesterdey I was working with my computer, transfering normal stuff from my mobile to the computer and suddently my monitor went black, then I restarted my computer, but my monitor was still black and my d-bracket was all red lights, so I shutted down my computer to change my grafics card an see what the problem was, but it would never turn on again... it startind turning on and off every half second non stopping.. so I went to borrow other power supply but when I try again to turn it on, it was simply dead and with my old one was still dead. Is my mobo or processor fried??? :( please help...
    Msi k8n neo platinum socket 754
    revoltec power supply 450 watts 25 amps in 12v rail
    2 gb kingston pc400 ram
    80 gb sata hd
    120 ide hd
    ati radeon 9600 xt grafics card
    athlon64 2800 processor
    pinnacle pci tv card
    hp dvd
    philips dvd

    Quote from: rubengomes on 14-January-07, 22:00:09
    thanks for the reply... butt it still does not work...
    take CPU out and find a way to test it somewhere else. if CPU is fine, then must be failure mainboard if we dismiss PSU factor(you have already tested with 2 PSU's good ones)

  • CL3 Memory wont work on Intel 848P Neo Mainboard? any help?

    Hi,
    I purchased Kingston DDR Ram recently and put it into my computer. It worked fine but sometimes I start computer up and it comes up with a message saying something is wrong with the memory timings. I dont think it is configured properly.
    In the BIOS there was an option to "CONFIGURE DRAM TIMING BY SPD" and i set that on ENABLED. If i set it to DISABLED then there are other options that I have to set.
    These options are as follows:
    1. CAS# Latency [Options 2 or 2.5 Clocks];
    2. RAS# Precharge [Options 2, 3 or 4 Clocks];
    3. RAS# to CAS# Delay [Options 2, 3 or 4 Clocks];
    4. Precharge Delay [Options 5, 6, 7 or 8 Clocks];
    5. Burst Length [Options 4 or 8 Clocks].
    These are the 5 settings i can modify and in the "[]" brackets are the options i can select from for each one. Could you please tell me how I am to configure this in order for the memory to work. The Ram voltage is set at 2.6v. The CAS# Latency only allows 2 or 2.5 clocks so im not sure if thats the problem or not.
    The specifications of my computer as as follows:
    RAM - Kingston KVR400X64C3A/1G 1GB PC3200 CL3 184
    Motherboard - MSI 848P Neo (MS-6788 v1.0)
    Motherboard BIOS - A67991MS v1.0081203
    Motherboard firmware - V1.0 initial release
    CPU - Pentium 4 2.53Ghz
    Regardless of the settings I have done so far, if it works past POST and loads windows...after sometime it randomly resets. Any idea why this is the case? I suspect its the CAS Latency. The manual says you can select 3 Clocks but i dont see that option, just 2 or 2.5

    The Kingston Site is not always correct or to be more precise:  it does not state the operating conditions under which DDR-400 is possible on this mainboard.  In this cases the problem is not the modules as such (they are able to run @DDR-400) if they are put into a system that supports that.
    In your case the problem is the mainboard's chipset which can only make the memory run @DDR-400 when an FSB-200-MHz processor is installed.  You are currently using an FSB-133-MHz processor.  With such a processor, the maximum memory clock speed that the system can run at is DDR-333.  I just checked the Intel Datasheet for the 848P Chipset.  That is also the reason why all DDR-400 modules mentioned in the official MSI Memory Test List for this mainboard were tested with an FSB-200-MHz-CPU installed. 
    The only thing you can do to get aroung this "problem" is to install a supported FSB-200-MHz-processor.
    Quote
    Also, when i look at my motherboard manual, it shows option for 3 as CAS latency but in reality when i check the bios its not there (which im assumin is reason y it wont work).
    It would probably be there once a processor is installed that will enable higher memory clock speeds than DDR-333.  However, the actual CAS latency is only of secondary importance here.  The main question is why DDR-400 is not possible (which would automatically yield a CAS Latency of 3 by settings the values in the corresponding SPD Profile).  And as I said:  DDR-400 is only possible with an FSB-200-MHz-Processor.
    With your current configuration, the highest possible memory speed is DDR-333 @2.5-3-3-7.  In case that runs fine & stable everything is working as it should.

  • 848P Neo-LS [help configuring ...]

    I just set up a 848P Neo-LS
    support for:
    800mhz FSB
    400mhz DDR
    I installed a P4 2.8c which should be able to run at 800mhz
    I don't feel the mainboard manual give enough detail to explain how to set up the bios and when i view "CORECENTER" it shows my pc running at 200mhz FSB. and when i click where it shows this on the right pannel, what's with the 200mhz x 14.0=2807 mhz?
    I just want to make sure my pc is running at 800mhz FSB and my 400mhz pc3200 ram i have is running optimally as well.
    ALSO, in the bios it shows the DRAM, PSB 400MHZ, PSB533 MHZ AND PSB800MHZ.
    IF PSB is stands for another bus what bus is it and y do the equivalants to 400, 533 and 800 only = 100-344mhz, 133-500mhz and 200-500mhz respectively?
    ANY help would be appreciated, i know from viewing this forum that there are MANY of u out there that are EXPERTS with MSI boards and setting them up.
    thanks for any help
    IRISHHUNK
    (St.PAtricks day's commin up, have fun

    And PSB (Processor Speed on BUS) is Basically the same as FSB (Front side Bus) only it is a different Name, So set your PSB to 800 and  you should set your Memory to 400MHZ or "Auto" if you have this Choice.You may also come across something called PBS (Processor Bus Speed) which is Actually the FSB Divided by 4 so it is PBS X 4 = FSB in your Case PBS=200 X 4 = 800MHZ FSB or PSB.....But we tend to use FSB in this Forum so as Everybody does NOT get Confused .........Sean REILLY875

  • K8 Neo takes 5 minutes or more to start. Please help.

    Please can anyone help. When I switch on  I get the opening platinum screen and it remains there for 5 - 10 minutes or more before starting up . Please help. I'm desperate.

    Welcome to forum.
    read Moan Guide 1st.

  • MSI 848P neo-V

    my love:
    MSI 848P NEO-V
    CPU celeron 2,4Gh bus 533
    Ram 512Mb
    HDD seagate sata 80Gb
    AGP Asus V9400 X
    today, i make a ghost file with nortonghost ver 7.0, there's strange. Ghost speed just about 100Mb/Min ( same specification with ASROCK is 400Mb/min)  . I don't know why, i think it maybe come from Cmos setting. Mod and ACE please help me.thanks in advance

    thank you, i've just enable it, i will check later, there is another problem, i just bough a CDRW, i install into my computer, but my computer doesn't analize, it looks like nothing install,my computer only analize my old CD, if i take out my old CD then my computer "see" my new CDRW and i use normally. Please help me, i need to use both CDs.thanks
    note: i set master for my old CD and slave for new CDRW.
    one more thing, onchip controller ATA(s) have two selections, one is lagacy mode,one is native mode, please explain what different between them??

  • MSI 848P Neo Series MS-6788 Model

    Hi,
    I'm new to building PCs and I have just built a P4 2.8GHz 800FSB Machine with an 848P Neo Series motherboard.
    I have a few issues:
    I cannot use a PS2 mouse it simply will not work.
    With my PS2 keyboard, turning on num lock or caps lock causes the PC to lock up.
    Is there some sort setting in the BIOS I need to change or is the board faulty?
    Another issue I had which has now magically fixed itself - when I turned the pc on, I had to turn num lock on and then off to get the monitor to come off standby and to get the pc to start booting - any ideas?
    Could you please help with with these problems as I don't have long to return the motherboard if it is faulty.
    Thanks in advance

    Hi Maggioni,
    Look on side on PSU.....somewhere the will be the different "Rails".... list 12V,3.3V,5V, in AMPS. IE- 12V+ = 20A etc.
    Hmmm, as for Keyboard.....is it a standard 105 or 102? Maybe, it is an enhanced with extra keys? Wireless or Corded. (If wireless....try changing the batteries)
    Also try changing keyboard....borrow or buy a budget one.  
    Del

Maybe you are looking for