848P Neo-V
Hello, I've just bought a mainboard MSI 848P Neo-v, Intel P4 3.0Ghz Prescott, and a PowerColor Radeon 9800 Pro 128MB. My problem is that all 3D games gets all messed up, and its getting worser the more you play, dots and stuff. I´ve tried everything i think, changed Agp 4x/8x, fastwrite, changed position of power to graphic card, new/old drivers, bios etc. but nothing works. When i istall PCalert4 it gives me a warning that 3.3V is down under 2.8V, and when i istalled corecenter it tells me the same and that vcore is up 1.7 - 1.8. Is there a way to alter does values? Like boost the 3.3V up.. I think it has to do with the graphic problem, does anyone know? Please help!
Pentium 4 3.0GHZ 1MB L2 Cache (800Mhz FSB) Prescott
MSI mainboard 848P Neo-V http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=596
PowerColor Radeon 9800Pro 128MB AGP 8X http://www.power-color.com/R98-PC3F-128BIT.htm
DDR 512 MB (2x256 266Mhz) Memory
2x Harddrives (60 GB/100 GB)
And the PSU 350W +3.3V - 20A
+5V - 30A
+12V - 15A
That might be the problem, do you think
Similar Messages
-
As said - no control of the damn fans (Case/CPU) on my 848P Neo-LS. On the CoreCenter the button lits up on mouseover, but when pressed, nothin' happens (as said in manual, press to toggle user/auto modes for fan control).
Also CoreCenter doesn't show the Case fan's speed, but Northbridge (NB fan) fan's speed, which is obviously 0. Also NB temp is N/A. Also +12V is N/A. Also the FSB stays always at 101 Mhz, not 100. No overclocking done.
Today upgraded the CoreCenter to the most recent vers (1.7.0.0.), and the button doesn't lit up anymore...?
When I installed SpeedFan 4.17, it allows me to control the Case fan's speed from 2300 - 2700, but nothing more. Interesting.
CPU - Celeron 2.0
RAM - 256 MB Kingston
CPU Fan - OEM intel fan A80856-003
Case Fan - MJ 802512
Both fans with speed sensors, of course.
Should I update the bios?
Help somebody!To be sure I opened the case and stopped the fans by hand (I don't use the corecenter prg - piece of crap), to see that i have mistaken both fans (in SpeedFan prg). The one who varies by 400 rpm is the Cpu fan.
Doooh.
The bios health screen doesn't show +12V at all - just aint there...
The MSI tech support sez - flash the bios, and if anything doesnt change, the CoreCell chip has gone (faulty, whatever).
Flashed the bios (1.0 - 1.9 now). No changes. -
Does the 848P Neo-LS support celeron D 315???
Does It???, in the msi page says that celeron D wont work on 848P Neo-LS motherboard, but other motherboards with this chipset works fine with celeron D, someone knows if it works or not?
Well my mobo (KT6V-LSR) doesn't even list the 2600+ barton, but I haven't had any issues, but where the CPU support actually lists it as NO, that usually means they have done testing. So I would say most likely no, but depending on where you buy it from you may get a chance to try it.
Good Luck
Jeremy -
848P Neo-LS RAM-memory ?
Hi someone who ones where i can find witch ram memory i should have for my 848P neo-LS ??
I have Kingston 512 Pc3200 CL3 is that ok ?
thanks
Henke Lhttp://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_trp_detail.php?UID=493
The Memory Modules link on that page will give you the modules the board has been tested with. Others may work as well, but just haven't been tested.
I didn't check to see if the Kingston are in the tests, but they do work with other boards using the ICH5 chipset. -
848P NEO-LS SATA (Native Mode) - Cant Install WinXP
Okay guys -
I have a 848P Neo-LS which seems to be somewhat rare on this site in the support sections.
Its a brand new board and looks very fancy. I have a lot of experience with PC's as I repair them on a daily basis however this is my first adventure into the land of SATA.
To go with my lovely new MSI motherboard I have purchased a 120GB SATA Hard Disk.
In the BIOS for the motherboard under "Intergrated Peripherals -> On-Chip IDE Configuration" I can choose to operate the On-Chip ATA in either legacy or native mode. According to the manual that came with the board for Windows XP, I should use Native mode (which is exactly what I want as it allows for 6 ATA devices, as opposed to only 4 with legacy mode - im using a mix of SATA and P-ATA devices).
When set to Native mode and booting the Windows XP Pro installation CD, it gets so far then I get a blue-screen warning me about a possible harddisk problem?
But if I set it back to legacy mode and boot the Windows XP Pro installation CD, everything goes through okay and I can choose to begin installing XP if I wish.
However I want to run in Native mode as this will allow me the mix of SATA and P-ATA Harddisks that I want to run. The manual provided with the MSI board also instructs me that this should be possible.
Its not working - what is wrong???? From my knowledge of NT based operating systems im guessing I need to press F6 during the installation CD boot sequence and insert a driver disk for the SATA controller? Although it seems strange that this works in legacy mode - perhaps I have answered my own question here and that isnt the problem?
Or maybe I need a BIOS update, or maybe something entirely different????
Can someone please answer my question as I would love to get using this wonderful new PC.
Thanks in advance for any advice.
Delirum SkyYou don't need to install any SATA drivers for your board. I suspect a compatibility issue with the HDD or on of the other SATA/IDE devices you have connected. I would do the following:
Search the Maxtor site for common issues with your model#
Install XP in legacy mode and then switch to native mode as suggested above. I have switched back and forth between modes with no trouble.
If you still get problems,
1. Update to latest BIOS if one is available. Most new Bios'es on the newer boards include fixes to compatibility issues with SATA devices and memory.
2. Try installing XP with only the HDD and a generic CDROM or CDRW attached. If this works, install the other devices back one at a time and test to rule them out as the culprit.
With a recent Bios and your setup I would set On-Chip Config:
Native mode
SATA Only
Keep PATA active-Yes
Both channels
Leave rest at default.
Hope you get it working. -
[848p Neo S]please Help Me
Hi
Please Help Me
My Pc is Very Slowly
*** any person enterd her replay me please***
EXAMPLE:-
TRANSFEAR 4 GB FILMS IN 10 MINUTES
Component
MOTHER BOARD MSI 848P NEO S
PROCESSOR INTEL P4 2.6 CASH 512 PATH 800
RAM 256 DDR PATH 333
VGA 128 ATI RADEON 9200 SE
H.D 80 GB WESTREN DIGITAL 7200 RBM
SOUND CARD 128 DIGITAL CREATIVE
FAX INTEL
PLEASE HELP ME
WHAT CAN I DO ?
THANKSHi,
I would say 4.9Mb/s on such a large file is good....
1GB = 1024Mb
1Gb = 2.5 mins to transfer
Therefore 4.9Mb are transferred every second...... If you are looking for the 100MB/s that's PEAK and not actual......
Del -
Problems with adding 1Gb memory to 848P Neo
I have had an 848P Neo since February now, with only 512Mb, but seeming as some games and applications I have been running are now taking 512Mb as a minimum, I decided to buy another stick of 512Mb PC2700 333Mhz DDR to take me up to 1Gb. But I struck a problem.....
With both sticks of memory in the machine, the computer fails the memory 'POST' test on reboots (not boots from power off, but when something makes it reboot. ie: BIOS or WinXP). When I do get into Windows, the Core Centre utility acts weird too. It locks up the whole machine, whether you are trying to 'restore' it, or adjust the FSB. It won't even shut down or Ctrl-Alt-Del with it (this is surprising as I have never had to turn off or reset it via the case, as all lock ups have been recoverable).
With either of the sticks in on their own, it works fine. eg: Stick 1 in DIMM 1 or 2/Stick 2 in DIMM 1 or 2. But when they both go in at the same time I get problems. Both sticks are of the same CL according to the Everest System utility.
I have been getting help from my magazines forum, but they seem to have hit a dead-end too. Thread is here.
I would also like to add that I don't think it can be because one stick is Kingston (I think) and the other PNY, as I took the Kingston out of my second comp (same memory) and it still wouldn't work.
I hope I can get this fixed soon.How do you up the 'VDIMM'? lol.
I don't think it is a mixing prob, as I took the other stick from my other computer (all the numbers on the memory chips are exactly the same, except it is a green stick instead of blue), and the problem still existed. -
848P Neo-V Bios on chip IDE Configuration
Can someone advise me on the proper setting for the 848P Neo-V IDE configuration when using only IDE devices. I am not using any SATA devices. Should I be using the Legacy Mode or the Native Mode for the On-Chip ATA Operate Mode ?
I am aware when using any SATA devices that Native Mode is the correct setting. When just using IDE hardrives and IDE DVD-Roms should I set this to Legacy ? There is no real clear rule to this as I have searched all over the Internet and can't seem to get a definitive answer. Any advise is appreciated.You should find alot of answers in this forum. It is similar to the 865PE and 875P Neo setup.
Native Mode
SATA Only
PATA Keep Enabled
PATA Channel Selection (Both)
Set SATA as RAID (No)
The rest as defaults. -
848p neo problems PLEASE HELP!!!!
just got a new 848p neo, celeron 2ghz/400, and a stick of 512 2700... put it all in my computer, hooked up the hard drive cd rom etc.... and booted up, boots up but when windows loads it stops halfway thru the windows startup screen and shows a blue screen and says "inaccessible boot device"... any ideas?? a litte background.. got windows 2000 and went from a celeron 400 with generic motherboard to the new stuff... thanx all.......
PowerIf this hard drive had windows installed with the old motherboard it is not going to boot with the new one. You need to do a fresh install.
-
Problem with 848p NEO V and GeForce FX 5600 point of View
Hello there,
I have bought a mobo yesterday (848p NEO V) then when I tried to plug the graphic card (Ge Force FX 5600 point of view) the computer reboots just before entering Win XP PRO.
So I tried another graphic card (ATI 9200), all worked fine.
In the same way, I tried my GeForce in another mobo (ECS P4VXAS) and of course all worked fine.
Each time I tried the MSI mobo with the GeForce card (using diffrents drivers), it doesn't work.
Does someone know where could this problem come from?
Thank you very much
PS: Sorry for my ugly english.MOBO: MSI 848p NEO V
CPU: Intel P4 2.4 A
Ram: 512 M DDRSDRAM PC3200 (noname) two 256 modules
DD: 40Go (MAXTOR), 40Go (MAXTOR)
Display: Point Of View GeForce FX 5600 128mb
Sound: Sound Blaster Live! 5.1
Controler Card: Sillicon Image 0680A ULTRA ATA 133
DVDROM: LG
CDROM: Samsung
DVDRW: Liteon
OS: Win XP Pro SP2 FR (all critical updates installed)
all cddrive on motherboard IDE controler
hard drives on controler card
PSU: 350w noname
Tell me if you need anything else.
Thanks -
Can any one help me I have just bought MSI 848p Neo motherboard and keep getting
Pci fast ethernet controller v2.11 (001205)
PXE-E61: Media test failure, check cable
PXE-MOF: Exiting PXE Rom
Cant get my head around the problem. Thanks KeithDisable "boot from network" or similar in the BIOS.
Moan Guide -
Hi, I've both a mother board 848p Neo-S , I've install al correctly but I've lost the drivers cd-rom, so i haven't sound !
In MSI Homepage http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=493 i have downloaded the win xp service pack (as they indiques) but the sound is not here yet.
Anyone can help me?
ThanksPlease read and provide information requested in Moan Guide
-
Overclocking p42.66 (c1) on 848P Neo-LS help!!!
hi i am looking to overclock my p4 it but i dont know what settings i should have in the bios.
here is my system:-
INTEL P4 2.66GHz (C1 STEPPING)
AKASA P4 BLUE LED HSF (UPTO 3.6GHZ)
MSI 848P Neo-LS
1GB SAMSUNG DDR333 PC2700 CL 2.5
ABIT SILURO GF FX5600 ULTRA OTES 128MB DDR 400/800 (FLIP CHIP)
80GB SAMSUNG HD 7200RPM
550W QTEC PSU.
i have updated the bios rev. to 1.2 (latest).
also i have 7 80mm blue led akasa fans installed in clear case for controlled air flow.
any help in this matter would be great.
if you need any more info i would be glad to help.
cheersread this guide:
https://forum-en.msi.com/index.php?threadid=40413&sid= -
my love:
MSI 848P NEO-V
CPU celeron 2,4Gh bus 533
Ram 512Mb
HDD seagate sata 80Gb
AGP Asus V9400 X
today, i make a ghost file with nortonghost ver 7.0, there's strange. Ghost speed just about 100Mb/Min ( same specification with ASROCK is 400Mb/min) . I don't know why, i think it maybe come from Cmos setting. Mod and ACE please help me.thanks in advancethank you, i've just enable it, i will check later, there is another problem, i just bough a CDRW, i install into my computer, but my computer doesn't analize, it looks like nothing install,my computer only analize my old CD, if i take out my old CD then my computer "see" my new CDRW and i use normally. Please help me, i need to use both CDs.thanks
note: i set master for my old CD and slave for new CDRW.
one more thing, onchip controller ATA(s) have two selections, one is lagacy mode,one is native mode, please explain what different between them?? -
MSI 848P-Neo - Mobo don't start at all
Hi,
I have a MSI 848P-Neo mobo with a P4 Ht 3.0 Ghz on it. New PSU 360W Enermax (12V 26A, 5V 32A, 3.3V 32A). No HDD or CD Drive are plugged. No card in PCI slot, except VGA in AGP Slot. 1 RAM stick in slot.
When I power on the system, the D-Bracket with Diag led light as follow:
1 and 3 are red
2 and 4 are green
I check in manual for signification but this case isn't in the manual.
I don't hear beep from speaker.
Can you confirm me that is the mobo the problem ?Have you Clear CMOS Guide yet with power cord removed from the PSU 1st?
-
CL3 Memory wont work on Intel 848P Neo Mainboard? any help?
Hi,
I purchased Kingston DDR Ram recently and put it into my computer. It worked fine but sometimes I start computer up and it comes up with a message saying something is wrong with the memory timings. I dont think it is configured properly.
In the BIOS there was an option to "CONFIGURE DRAM TIMING BY SPD" and i set that on ENABLED. If i set it to DISABLED then there are other options that I have to set.
These options are as follows:
1. CAS# Latency [Options 2 or 2.5 Clocks];
2. RAS# Precharge [Options 2, 3 or 4 Clocks];
3. RAS# to CAS# Delay [Options 2, 3 or 4 Clocks];
4. Precharge Delay [Options 5, 6, 7 or 8 Clocks];
5. Burst Length [Options 4 or 8 Clocks].
These are the 5 settings i can modify and in the "[]" brackets are the options i can select from for each one. Could you please tell me how I am to configure this in order for the memory to work. The Ram voltage is set at 2.6v. The CAS# Latency only allows 2 or 2.5 clocks so im not sure if thats the problem or not.
The specifications of my computer as as follows:
RAM - Kingston KVR400X64C3A/1G 1GB PC3200 CL3 184
Motherboard - MSI 848P Neo (MS-6788 v1.0)
Motherboard BIOS - A67991MS v1.0081203
Motherboard firmware - V1.0 initial release
CPU - Pentium 4 2.53Ghz
Regardless of the settings I have done so far, if it works past POST and loads windows...after sometime it randomly resets. Any idea why this is the case? I suspect its the CAS Latency. The manual says you can select 3 Clocks but i dont see that option, just 2 or 2.5The Kingston Site is not always correct or to be more precise: it does not state the operating conditions under which DDR-400 is possible on this mainboard. In this cases the problem is not the modules as such (they are able to run @DDR-400) if they are put into a system that supports that.
In your case the problem is the mainboard's chipset which can only make the memory run @DDR-400 when an FSB-200-MHz processor is installed. You are currently using an FSB-133-MHz processor. With such a processor, the maximum memory clock speed that the system can run at is DDR-333. I just checked the Intel Datasheet for the 848P Chipset. That is also the reason why all DDR-400 modules mentioned in the official MSI Memory Test List for this mainboard were tested with an FSB-200-MHz-CPU installed.
The only thing you can do to get aroung this "problem" is to install a supported FSB-200-MHz-processor.
Quote
Also, when i look at my motherboard manual, it shows option for 3 as CAS latency but in reality when i check the bios its not there (which im assumin is reason y it wont work).
It would probably be there once a processor is installed that will enable higher memory clock speeds than DDR-333. However, the actual CAS latency is only of secondary importance here. The main question is why DDR-400 is not possible (which would automatically yield a CAS Latency of 3 by settings the values in the corresponding SPD Profile). And as I said: DDR-400 is only possible with an FSB-200-MHz-Processor.
With your current configuration, the highest possible memory speed is DDR-333 @2.5-3-3-7. In case that runs fine & stable everything is working as it should.
Maybe you are looking for
-
My ipod touch is a 2nd generation (i think). has deleted all my songs and videos
hi i have a i pod touch (2nd generation i think). last night i was setting the alarm clock on it and once i had done that i tryed to go to the home page but it wouldnt let me do it so i figured out it had frozzen an once it had stopped being frozzen
-
Kernel Panics when waking from sleep? 2012 MBA Base Model
I've been having some trouble with my 2012 MacBook Air. It was running perfectly until about 2 weeks ago. Now, when waking from sleep, I am getting Kernel Panics that force the restart of my Mac. I was wondering if anyone could provide insight on the
-
Can I make an entry in widows Registry through an applet?
Hi, Can i make an entry in the windows registry using applets? actually i want to make an entry on a remote machine. is it possible? if yes, then how? thnx kapilChhabra
-
HT1343 where to find the downloaded ios firmware located
please tell me how to find my downloaded ios firmwares on my imac
-
Opening Illustrator 5.5 files on Macintosh 7.5.1
Hi, I'm seeking advice on how to open Ilustrator 5.5 files on an old Macintosh Performa 580CD (7.5.1). These files were given to me on double density disks and I can only access their content on this specific computer. Unfortunately the computer does