85% current capacity after 4 cycles in Macbook Pro Retina.
Is it normal that I have only 85% current capacity after just four cycles in Macbook Pro with Retina Screen? A little bit over 7140 mAh compared to 8460 mAH in design capacity?
Should I call Apple Support?
Hey Allan,
Greetings!
Yes you rightly pointed out the changed format
And I have been around for a few years but mostly get active whenever I purchase a new Macbook. you know how the honeymoon period is
Unfortunately I am experiencing two difficulties myself which I haven't been able to figure out.
I have this late 2013 Macbook pro Retina, 13". Purchased it 20 days ago!
Now the two problems are
1. Safari sometimes doesn't load some pages and apple.com being one of them. Again as I read somewhere when opened on the Chrome and then back on safari almost at the same time, safari pulls it up.
I dont prefer other browsers as my battery discharge becomes rather quick on chrome doing the same task.
Do you hav any idea what might be wrong. I tried switching of all extensions and plug ins. Also did a few resets.
Read somewhere that it has to do something with the DNS of the router but then why this erratic behaviour and not a consistent one.
2. My battery is also showing erratic behaviours. The max health varies between 6350 to 6673 (Didn't see the later for last few days). Also the life the system predicts vastly varies doing the same tasks. Sometimes if I am reading a page online it would show 14 hours on 100% and sometimes just 7-8.
The worst part is that the it just doesn't show it that way rather behaves the same way. That means that battery actually drains at the rate the sytme predicts.
Also even in shut down (and not sleep), the system tends to use charge at a rate of 1% per 8 hours.
All this mentioned in the paint 2 started happening when my machine got drained to 1% power remaining once and the other time was shut down as I was travelling and didn't have the charger. Is that to blame?
Any input would be appreciated.
Similar Messages
-
after updating my Macbook Pro retina display to os x yosemite 10.10.2, the mause and track pad locks, and do not respond especially when using the Mac for a long period, please help, how can I solve this, I do not like feel like in windows, so I paid good money for this mack, I feel calm
Hi Buterem,
I'm sorry to hear you are having issues with your MacBook Pro since your recent Yosemite update. I also apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having intermittent but persistent responsiveness issues with your mouse or trackpad, you may want to try using Activity Monitor to see if these incidents correspond to occupied system resources, especially system memory or CPU. You may find the following article helpful:
How to use Activity Monitor - Apple Support
If the entire system hangs or locks up (for example, if the system clock freezes and stops counting up), you may also be experiencing some variety of Kernel Panic. If that is the case, you may also find this article useful:
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
Regards,
- Brenden -
First cycle of MacBook pro retina of battery
During the first charge of he MacBook pro retina, is it best to fully charge it and leave it on the plug?
you can leave your Retina plugged in since once it's fully charged, it will stop charging......
as with any macbook battery, it's best to use it plugged in when you're close to a power outlet and use it once in a while under it's own power and charge it back up once it's down to 75% to keep the battery in optimal condition...
do not use your macbook under it's own power to 0%....it will do more harm than good to your battery...
good luck and have fun with your new Retina.. -
MacBook Pro Retina won't wake after after sleeping!
On most occasions after my 13" MacBook Pro Retina has been put to sleep (by closing lid or pressing Power button) overnight it will not wake up again until I have reset the Systems Management Controller. Opening the lid, or Power button or Space bar still leaves a black screen.
My wife's new 11" MacBook Air suffers similar problems even after our local Apple Store reinstalled Mavericks in an attempt to resolve the problem..
Any thoughts on a solution would be gratefully received - thanks.Mac Pro is not the same as the notebook MacBook Pro
More Like This - from side bar
Re: my 2012 macbook pro takes forever to wake up after sleeping overnight
Re: Retina MacBook Pro hang time on wake.
Re: Retina MacBook Pro wont wake from sleep
Re: Retina Macbook Pro Freezes after sleeping...
Re: Macbook pro retina crash when wake up from longtime sleeping -
Need advice on RAM i need for MacBook Pro Retina? Will 4GB Be Enough?
Hi Everyone,
Basically I am currently saving up for my MacBook Pro Retina(13") and I need some advice about RAM. I am a 14 year old student who is starting there GCSE's in September and I have no idea how much RAM i will need; I will be using my new MacBook on video editing(not intensive just in iMovie), GarageBand(occasional), Safari and iLife and I am a little worried that 4GB of RAM is not going to be enough to handle this. I know that I cannot upgrade the RAM after i have purchased the Mac but I don't really want to pay over £200/$300 just for extra storage and RAM when i don't really need it, what do you all think? any ideas?☺️Because memory is not upgradeable, you should get as much as you can afford. 4 GBs is a minimal requirements. I would suggest at least 8 GBs. The same goes of SSD storage space. Get more if you can. At least 256 GBs if you can afford it. Remember it is not what you will do tomorrow, but a couple of years from now that really matters.
-
New Macbook Pro Retina has capacity of 120.47GB??
Hi all,
I got a new Macbook Pro Retina 2 weeks ago and after tirelessly trying to migrate everything from my old MBP, I have just realised the new MBP says I have a capacity of 120.47 GB with 101.31 GB available.
I am in no means tech savvy but this doesn't sound correct when I purchase a 4GB Macbook Pro??
Can anyone assist?
CheersThe 4GB is the RAM operating memory that your computer has. That's for programs that are currently running. The 120GB is storage space. That's where everything is kept until you start using it. You load from the storage space into the RAM memory.
You'd have to look through all your stuff to see what you can delete that's not important to you. You might want to do it the other way, which is to reinstall the applications that you want and just selectively move over documents and stuff.
How long have you had the new Mac? It sounds like maybe you should've gotten one with more storage space. You can return it within 14 days of purchase. -
My MacBook Pro (Retina, Mid 2012) is too slow after installing Yosemite version 10.10.1. All programs take for ever to load especially Safari and even chrome. I regret upgrading to yosemite, it was all fine with Maverick. Any suggestions ? ThankYou
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
MacBook Pro Retina, good enough for a few of After Effects? Or should I go for Windows Laptop?
Hello!
I'm now a college student ! And I'll need to get a new laptop We will be using it for CAD, MathLab etc.,
But I practice on AE, I'm no expert at all (i don't even know some of the controls and keyboard shortcuts), I do like 'opening titles', a bit of 'harry potter effects', etc. I'm really interested in the new Retina Display MacBook Pro (base model), it will be the first time I ever get a Mac if I go for it
But of course, the price is really high, so I have my doubts - the specs of the rMBP is not that superb - i think only the resolution is.
My question is, will the base model rMBP give a decent After Effects CS6 performance, or a significantly worse performance than Windows Laptops at it's price?
Thank your for your time
Please ask me anything so I can help you better to help meI have a decked out MacBook Pro Retina and it works very well for all CS6 apps. It's actually faster by a bunch than I thought a laptop could be. I have several personal reasons for going Mac. They are my personal preferences and experience for reliability, stability, and customer service. I'm not married to OSX. If a better system for me was available I'd be using it. The for me is the critical part of that statement.
The biggest advantage of Mac computers is that there is very little chance that the components have not been fully tested and integrated. The QA/QC in all Mac hardware is some of the best in the world. Every Mac I've ever owned has been virtually trouble free mechanically and outlasted every windows machine I've ever owned. Apple does make mistakes and fouls things up, but the chance that you are going to end up with a machine that just works and runs and runs is much higher than anything built from the variety of components available on Windows machines.
Now my comments on windows machines. There are more manufacturers that I can count. There are more hardware combinations that I can imagine. Some manufactures produce excellent products. Some are just junk. Some last a very long time. Some breakdown all the time. If you were to go Windows make sure you check out the reputation and the warranty of the company building your machine. I've only owned one really high end Windows machine from a high end manufacturer. It ran just fine for about a year and a half before it needed some major component replacements. The warranty was out, there was no extended warranty available from that manufacturer, so the repairs cost me about 1/3 of the purchase price. If I'd gone with a company with a better service policy I would have saved a boatload of cash in the long run. Every other windows box that I've owned has been built from scratch or purchased in a shoe string. It took a fair amount of monthly maintenance to keep them running well.
You mentioned CAD... Audocad on the Mac side is really crippled. My associate has the full Autocad Civil Engineering package running on his MacBook Pro Retina under Parallels. It's working fine. It's one of the largest and most complex CAD packages available. It actually works better on the Mac than it does on his HP laptop and the Mac batteries last a lot longer. The HP laptop cost about half what the MBPro did. It's about 6 months older. It's not as loaded. If you were to replace the HD in the HP laptop with the same capacity SSD that is in the MBPro and bump the memory up to 16GB the HP would still be less expensive than the MBPro by about 18%. The HP is plastic and aluminum with a display screen that's very sensitive to scratches and damage by pressure. The HP is not compatible with CS6's ray traced rendering or Mercury playback for PPro. There is an HP model that is though.
You be the judge. Balance your budget and the software requirements with the expectations of reliability, service, customer service, and resale value and make your choice. -
Did anyone buy a MacBook Pro Retina 13" from Best Buy this Black Friday?
I'm having an issue where the WiFi disconnects after the MacBook wakes from sleep but only after a couple of minutes.
Once the WiFi disconnects, I can't reconnect to the same network and sometimes it won't find nearby networks.
I have to turn off the WiFi and wait for at least 5 seconds before turning it back on for it to auto-reconnect to my home network.
If I wait less than 5 seconds, it will continue to attempt connection to the home network but won't connect.
I've tried reformatting and deleting my network configurations as well as resetting my modem, power cycling it, etc.
I am using 2Wire Gateway modem/router from AT&T on b/g network.
I've tried connecting to a friend's network under Time Warner Cable and the same issue occurs.
I exchanged the MacBook at a Best Buy for a brand unopened one (I hope) and the same exact thing happens with this new one.
Really, I can't be the only one with this issue. Unless in a 0.00001% chance I received two defective units in a row?
Please.. does anyone have a clue why this is happening?You're definitely not the only one. I have the same issue. I spent 6 hours over multiple days on the phone with Apple support trying a variety of things (some of which are mentioned above), and none of them worked. They finally sent me a replacement laptop. I made sure to try it periodicaly as I was moving files and installing applications to see if I ran into it again and things seemed okay at first but now I am running into the same issue and it is terribly annoying. I've got 5 other devices that connect to the same router and I've never had this issue with any of them.
My router is a Linksys E2000. I haven't tried changing the router channel but I have tried to cnnecting to other networks in the building I live in and I have run into the same issue there. -
Macbook Pro Retina display says "No batteries available" after legitimate system software update
Issue Description
On July 26, 2012 I placed an order with Apple store for the 15-inch MacBook Pro with Retina display with the following configuration (Order # W269108641 Serial# C02J52S9DKQ5):
Processor 2.6GHz Quad-core Intel Core i7, Memory 16GB 1600MHz DDR3L SDRAM, Flash Storage 512GB Flash Storage
It was delivered August 8, 2012. It cost me $3,265.16
I have since equipped it with accessories like a wireless apple keyboard ($69), wireless mouse ($69), USB super drive ($79), VGA display adapter ($29), Ethernet Adapter ($29) and the excellent sleeve/pouch from Pack & Smooch GmbH (GBP60))
It's so heavily configured because it’s my main workstation. I additionally bought and installed Parallels 8 so I can run Windows 8 in a Virtual Machine because I have a few things on Windows that I need to be productive. This setup has been a dream machine until a little over a week ago.
In the one year since I bought it, I have had only 2 issues;
• A case of display flickering that resulted after a system software update on August 28, 2013
(Case ID 498560320 - not much help came from Apple Support but fortunately the problem went away a week later after another system software update)
• A case of battery failure that resulted after a system software update on October 11, 2013
(Case ID 516534003 - I have gone through all recommendations from Apple support as I will detail below)
Symptoms after system software update
• Battery Icon on status bar disabled with a message "No batteries available"
• Battery not charging
• LED on the Magsafe power adapter no longer show
• Keyboard backlights no longer show
• Notebook fan loud/noisy and permanently at high speed
• Date and time reset to a date in the past at each restart
• Notebook starts up the moment the Magsafe adapter is connected without waiting for power button to be pressed
• An update for "MacBook Pro Retina Display SMC Update 1.2" keeps appearing in Software Update
Recommendations from Apple Support
• Perform SMC Reset (http://support.apple.com/kb/HT3964)
(Done - no change in status)
• Run Disk Utility
(Done - no errors found)
• Run Apple Hardware test (http://support.apple.com/kb/HT1509)
(Done - no errors found, no change in status)
• Visit Apple Store
(Done - they confirmed no issue with Magsafe adapter. For a fee they are happy to change the battery if confirmed faulty and re-install the OS if the battery is not the issue but am uncertain that the OS re-install will resolve the issue because I have read online about a similar case where a re-install did not resolve the issue)
• Check System Report/Hardware/Power
(Done - Health Information/Cycle count:0, Battery installed: No)
• Perform NVRAM Reset (http://support.apple.com/kb/HT1379?viewlocale=en_US)
(Done - no change in status)
Comments and additional Observations
Please note the following;
• All of the symptoms above appeared after a system software update on October 11, 2013
• This update first appeared on October 10, 2013 but I was too busy to apply it especially because it required a system restart
• The battery was fully charged when I decided to apply the update on October 11 morning after I got to work
• Normally on full charge, the battery will typically deliver 3 - 4 hours depending on usage and up to 6 hours when idle
• The said update was not interrupted or anything of the sort
• On the day the symptoms were first observed when I first logged the case with apple, the system ran on battery while it performed the Apple Hardware Test while I was driving to the Apple support store on my way home even though the status bar was indicating "No battery available"
I make the following deductions solely based on my observations
• An apple authorized system software update broke the system
• The nature of the failure is communication related - the battery charging circuit and related systems are not getting the necessary instructions to function as they should (It's a known fact that rechargeable batteries do NOT die instantaneously, the total hours they run on full charge will gradually reduce over time as they degrade on use)
• It’s possible the update is not being applied correctly because the item “MacBook Pro Retina Display SMC Update 1.2” is still in Software update after subsequent attempts to apply it
• The high fan speed is nothing to do with high temperature or high processor load, according to the Activity Monitor utility the highest CPU utilization 1.9 – 4.7% is by kernel_task (PID 0) followed by activitymonitord at 1.8 – 2.2% (PID 481)
• The symptoms match what an SMC reset should resolve according to Apple documentation
• This is a known problem within Apple based on the documentation provided and the numerous similar cases reported online
Summary;
The system is running OS X 10.8.5
I have provided this detailed documentation in the hope that someone who understands this system can say exactly what is going on. It's meant to be a dream machine but now you can hear the fan from across a large room, the battery doesn't charge and is in fact not recognized so I lose data if the Magsafe adapter gets unplugged, and I have to reset the system date each time I restart the notebook.
I've used this notebook with utmost care for a little more than a year, this investment of over $3,500 could have bought 3 high end notebooks from DELL or HP but I chose Apple.
I have suffered untold loss in productivity in the last 10 days since this issue occurred, I respectfully request Apple to fix my notebook.Issue Description
On July 26, 2012 I placed an order with Apple store for the 15-inch MacBook Pro with Retina display with the following configuration (Order # W269108641 Serial# C02J52S9DKQ5):
Processor 2.6GHz Quad-core Intel Core i7, Memory 16GB 1600MHz DDR3L SDRAM, Flash Storage 512GB Flash Storage
It was delivered August 8, 2012. It cost me $3,265.16
I have since equipped it with accessories like a wireless apple keyboard ($69), wireless mouse ($69), USB super drive ($79), VGA display adapter ($29), Ethernet Adapter ($29) and the excellent sleeve/pouch from Pack & Smooch GmbH (GBP60))
It's so heavily configured because it’s my main workstation. I additionally bought and installed Parallels 8 so I can run Windows 8 in a Virtual Machine because I have a few things on Windows that I need to be productive. This setup has been a dream machine until a little over a week ago.
In the one year since I bought it, I have had only 2 issues;
• A case of display flickering that resulted after a system software update on August 28, 2013
(Case ID 498560320 - not much help came from Apple Support but fortunately the problem went away a week later after another system software update)
• A case of battery failure that resulted after a system software update on October 11, 2013
(Case ID 516534003 - I have gone through all recommendations from Apple support as I will detail below)
Symptoms after system software update
• Battery Icon on status bar disabled with a message "No batteries available"
• Battery not charging
• LED on the Magsafe power adapter no longer show
• Keyboard backlights no longer show
• Notebook fan loud/noisy and permanently at high speed
• Date and time reset to a date in the past at each restart
• Notebook starts up the moment the Magsafe adapter is connected without waiting for power button to be pressed
• An update for "MacBook Pro Retina Display SMC Update 1.2" keeps appearing in Software Update
Recommendations from Apple Support
• Perform SMC Reset (http://support.apple.com/kb/HT3964)
(Done - no change in status)
• Run Disk Utility
(Done - no errors found)
• Run Apple Hardware test (http://support.apple.com/kb/HT1509)
(Done - no errors found, no change in status)
• Visit Apple Store
(Done - they confirmed no issue with Magsafe adapter. For a fee they are happy to change the battery if confirmed faulty and re-install the OS if the battery is not the issue but am uncertain that the OS re-install will resolve the issue because I have read online about a similar case where a re-install did not resolve the issue)
• Check System Report/Hardware/Power
(Done - Health Information/Cycle count:0, Battery installed: No)
• Perform NVRAM Reset (http://support.apple.com/kb/HT1379?viewlocale=en_US)
(Done - no change in status)
Comments and additional Observations
Please note the following;
• All of the symptoms above appeared after a system software update on October 11, 2013
• This update first appeared on October 10, 2013 but I was too busy to apply it especially because it required a system restart
• The battery was fully charged when I decided to apply the update on October 11 morning after I got to work
• Normally on full charge, the battery will typically deliver 3 - 4 hours depending on usage and up to 6 hours when idle
• The said update was not interrupted or anything of the sort
• On the day the symptoms were first observed when I first logged the case with apple, the system ran on battery while it performed the Apple Hardware Test while I was driving to the Apple support store on my way home even though the status bar was indicating "No battery available"
I make the following deductions solely based on my observations
• An apple authorized system software update broke the system
• The nature of the failure is communication related - the battery charging circuit and related systems are not getting the necessary instructions to function as they should (It's a known fact that rechargeable batteries do NOT die instantaneously, the total hours they run on full charge will gradually reduce over time as they degrade on use)
• It’s possible the update is not being applied correctly because the item “MacBook Pro Retina Display SMC Update 1.2” is still in Software update after subsequent attempts to apply it
• The high fan speed is nothing to do with high temperature or high processor load, according to the Activity Monitor utility the highest CPU utilization 1.9 – 4.7% is by kernel_task (PID 0) followed by activitymonitord at 1.8 – 2.2% (PID 481)
• The symptoms match what an SMC reset should resolve according to Apple documentation
• This is a known problem within Apple based on the documentation provided and the numerous similar cases reported online
Summary;
The system is running OS X 10.8.5
I have provided this detailed documentation in the hope that someone who understands this system can say exactly what is going on. It's meant to be a dream machine but now you can hear the fan from across a large room, the battery doesn't charge and is in fact not recognized so I lose data if the Magsafe adapter gets unplugged, and I have to reset the system date each time I restart the notebook.
I've used this notebook with utmost care for a little more than a year, this investment of over $3,500 could have bought 3 high end notebooks from DELL or HP but I chose Apple.
I have suffered untold loss in productivity in the last 10 days since this issue occurred, I respectfully request Apple to fix my notebook. -
Can I upgrade hard disk storage of Macbook pro retina 15inch 2013 late after purchasing?
Can I upgrade hard disk storage of Macbook pro retina 15inch 2013 late after purchasing?
I currently have 256GB.Actually you can:
http://eshop.macsales.com/item/OWC/SSDAP12R480/
But installing this will void your warranty!
Ciao. -
After updating my MacBook Pro to yeosemite I want my old desktop picture back. I did a full back up before the install. I found the "Settings" folder in Time machine but when I try to open it I get an error message saying "You can not open this folder. It is in TimeMachine".
Can you browse the Time Machine drive from Finder?
If you can and you know where the picture was stored ie on your desktop you can browse through the folder structure to the picture copy it and paste it somewhere on your new install before right clicking it and 'set as desktop background' -
My left shift key on Macbook Pro Retina (15") is behaving like the F11 key (show/hide open windows).
The left shift key behaves the same on the laptop keyboard and on an external Apple keyboard.
This just started in last week after 6 months of use. The right shift key and other keys on the keyboard all appear to work correctly.
Suggestions greatly appreciated.I have a solution to this issue now after a discussion with Apple Support. Some where in the last few weeks, there was a change in the key that would do a Show Desktop under the Mission Control settings in the System Preferences. Even though the key sequence that was shown for the Show Desktop setting did not include the Left SHift key, by changing this first to having no key sequence and applying that and then changing it back to the F11 key, the Left SHift key issue that I was having has cleared up.
A second issue that was uncovered was that the SSD had some issues (uncovered when I ran Disk Utility using the Repair Disk key). I had to restart and use the Disk Utility through the Command R sequence to get to the stand alone Disk Utility. The SSD appears to be running better as a result as well.
Hope that this is of use to someone else in the future. -
Please, help!
After upgrading to Yosemite, my dock has disappeared, along with the dashboard and the wallpaper! Can anyone help? I'm using a MacBook Pro, retina, bought it last year.
ThanksHave you been trying to download from the app store? Did you get a message?
As a suggestion, you might go to an Apple store (genius bar appointment) for help. As far as I know, there should be no charge.
Barry -
Hi, I already finish download osx maountain lion after 2 attempts for my macbook pro retina. and when I want to sign out from my account at app store, it crash and some crash report show up. and if I sign in it happen also, but the app store still can be run after got the crash report, and I already sent the report to apple. do anyone got this problems ? and for apple : please fix this problems !
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
the Security button and set the Zero Data option to one-pass. Click on
the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
Maybe you are looking for
-
HT2330 How to transfer itunes on my dual G4 OS 10.4.11 to new iPad.
I want to transfer my itunes on my dual G4 OS 10.4.11 to my new iPad any suggestions please. iTunes is old version without "devices" listing on left column. Thanks very much.
-
Can't open FTP ports in Airport Extreme router
Hi, I have three computers networked at home with an Airport Extreme serving as a router to the internet. A couple days ago I set up an FTP server on one computer (Ubuntu Linux). It is running properly and I CAN get into the FTP server via the local
-
hi, does anybody knows how i can add userfields to documents by DI ? Some code snipets would be nice. thanks Markus
-
How to set the focus on the new added line in ALV list (OO)
Dear Friends, I have an ALV list based on OO(using alv_grid->set_table_for_first_display), when I click the 'new' button to add a new line, the mouse arrow is always pointing to the first line - not the new created line for user to input!!. So how to
-
ATGDustCase - Unable to load the components when the nuclues is starting up
Hi, Below is the ATGDust Case code to unit test existing DropletInvoker. But when we invoke the code it is unable to start the nucleus and throwing error like:- Unable to resolve component /atg/dynamo/service/groupconfig/Configuration java.lang.NoSuc