8500 A909a Won't Print Large Documents

My OfficeJet Pro 8500 A909a will not print large documents. Prints fine on websites, 2 or 3 page docs but nothing larger. Trying to print a mail merge of 450 letters - print spooler goes though normal proces but printer never prints - it just beeps when the print spooler is completed. Printer is installed ethernet on XP. HP check software reports OK. Thank you.

Take a look at this HP support page.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Similar Messages

  • Can't print large documents.

    For years, we've been printing large documents to our plotter without issue.  Suddenly last week, nothing large will print.
    I've seen a few different error messages, and have tried different computers, and different versions of Illustrator, but nothing large will print.
    When trying to print, I currently get the following:
    I've also seen an error suggesting not enough memory is available, which is bogus.  And I think another error that was more vague, something to the effect of "can't print"
    I've setup a clean install of illustrator on a clean windows install, same issue.
    I setup an alternate print server with our rip software, same software we've been using for years.  Same error on the alternate server.
    Nothing changed, and it's effecting everything here, and new installs.  I don't know what happened, but this is getting critical, we need the ability to print.

    EFI eXpress v. 4.1
    This all worked fine until a week ago, so I don't think there should be a hardware software compatibility issue.  The software and hardware were all working fine, and then we got blindsided by this stubborn error that came out of nowhere, won't go away, and has no error or log that gives us any useful information.
    It isn't a font issue.  I've created a basic test document that just consists of the word test.  Using this same font, I've had success printing documents that are 37"x79", 39"x75".  But, when I print 39"x79", it fails.  i've not zeroed in on the size that seems to be the cutoff, but I knew that a 37x75 worked, and 40x80 didn't, and 39x79 didn't either.  So, playing around with the numbers I found the above that did work.
    Also, using the general epson driver that you can get on epson's site, any print job can be sent without issue.  It's just that anything beyond 90 inches gets cut off. 
    I suppose this suggests the problem lies with EFI.  But, a clean install of EFI didn't resolve the issue.  What it comes down to for me is, the error is generated from Adobe.  So, at the least, I'd like an explanation from Adobe as to what the error is, since their software is generating it, and giving me no reason why it failed.  Plus, there's no way I can justify to management the cost of bringing in a 3rd party support for the EFI software, unless I have a better reason why the EFI software worked last week, but not this week, so I really need better data out of Adobe as to why it fails.
    I currently have a paid case open with Adobe, but they seem to be having difficulty as well, so far it's been a lot of time on hold, and a little bit of "try this, try that, try this", which is getting nowhere.  I need something more methodical to happen, and some actual following of data, or checking of logs, to get some detailed information, hopefully the case will get escalated to someone with a bit more in depth knowledge on these things.
    I will keep posting the details here as they emerge, because there's nothing I hate more than a forum thread with a problem I'm experiencing, that doesn't end with an answer.  I think forums should do a better job of either posting a resolution, or purging the cases that don't resolve, to get rid of the useless junk that clogs the internet and wastes people's time searching for answers.

  • My HP Photosmart C7280 All-in-One printer won´t print out documents, just pictures ...

    My HP Photosmart C7280 All-in-One printer won´t print out documents, just pictures. I´ve used the printer, since it was new on the marked, and it has worked perfectly until a few weeks back. There is no problem printing out pictures, but only blank pages comes out when I´m printing out documents. Regardless if it is Word, Excel etc.
    I´ve never used anything else than original cartridges, and the printer is used on Mac OS X 10.7.4. I´ve tried to reinstall the printer several times without any success.
    Can anyone help me?

    Hello,
    Please print a Self - Test report.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01448018&cc=us&dlc=en&lc=en&product=3204785&tmp...
    Can you see any of the colors as appear on the report sample?
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP Officejet Pro 8500 A909a won't let computer boot up

    I have an Officejet Pro 8500 A909a series connected to my HP computer running Windows XP Home. It was
    working perfectly. Now it won't let the computer boot while it's connected to the computer. I can unplug the 
    USB cable from the computer and it boots fine. I can then plug the USB back in and the printer prints fine. I 
    ruled out bad USB ports as everything else USB works fine in the same ports. I put a brand new cable on and
    had same results. I rebooted the printer and computer, with same results. I uninstalled the printer and drivers and
    reintsalled with same results. Computer freezes at the screen where it askes you to use the up and down arrows
    to select OS or wait for it to count down to 0. With printer unplugged it boots perfectly. This just started about 
    4 days ago. New printer. HP Support was at a loss when I did the live chat. Can anyone help?
    Message Edited by ComSource on 06-15-2009 07:14 AM

    Hi,
    The problem seems to lie in the installer, which has an unusual bad behaviour.  The installer puts the 8500 a909a in the list of USB  bootable devices.  (Not good!!!)
    When the printer is disconnected it isn't a problem.  When the printer is connected the computer tries to boot from the printer and the computer hangs.
    When I found the printer in the BIOS list of USB bootable devices I DISABLED that item in that list. Then it booted normally.
    But now the BIOS takes an extra 30 seconds or so but boot up seems to be preceeding normally.
    The guys on the CHAT and PHONE lines didn't even imagine the installer might be a problem so their advice was useless. They were blaming the computer.  More importanly, they didn't have a way to escalate the problem. They  had no capacity to respond in a flexible manner. It was like dealing with unhelpful staff in the county clerk's office.

  • Apple AirPort Express - HP LaserJet M1120 won't print entire document

    Hi,
    My first post.  I've recently purchased Airport Express and installed all necessary programmes (incl. Airport Base Station Agent and Bonjour print service) on my Win 7 Ultimate x64.
    The device is set up as "Join a existing network".
    Airplay works without any issues, but printing does not.
    I've also installed the driver for HP LaserJet M1120 printer.
    When I send something to print (regardless of the file), it won't print the entire document. Usually, it prints smaller documents (up to 10 pages) normally, but when it comes to larger documets it prints only half of the document.
    I send 30 pages document to print and it prints only 15 pages. Then I need to re-send print command and again, it prints only half - 7 or 8. Printer just stops.
    Sometimes i get "Error-printing", but not always.
    This issue happens on all 4 PCs that I have at home all running Win 7 Ultimate x64 or Win Vista Home Premium x32.
    Any ideas?
    HP Print Diagnostic Utility did not find any issues also. Says everything is OK. 

    Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the  AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers. 
    To see if your printer is compatible, take a look at thisiFelix Unofficial AirPort Printer Compatibility link. If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
    Also you can try this Apple Tech Support article to see if it will help: Printer troubleshooting for AirPort Base Stations and Time Capsule
    Finally, check out this IBM support article to see if your printer is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

  • LaserJet 1020 won't print first document after powering up

    My LaserJet 1020 won't print the first document it receives after powering-up. Print manager shows that the document is being sent, the printer makes noise like it's getting ready to print, but the document is never printed and I don't receive an error messages. If I send the document again the document prints as does every document there after.
    I'm using Windows Vista Professional and the printer is connected via USB 2.0.

    Hi jnickelsen,
    I understand the printer won't print multiple copies.
    Thank you for your reply.
    I will be happy to help you with this.
    This printer doesn't have the Mopier settings.
    What drivers are you using?
    Did you download the drivers or are you using the Windows preinstalled drivers?
    If you are using the Windows preinstalled drivers then I would download the latest drivers. Here is the URL for the HP LaserJet Full Feature Software and Driver.
    I would download and run the Print and Scan Doctor since it might resolve the issue automatically.
    Find and Fix Common Printer Problems Using HP Diagnostic Tools for Windows.
    Hope this helps.
    Thank you for posting on the HP Forums. Have a great day!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP Officejet Pro 8500 A909a Series - Not printing Cyan ink

    Hi,
    I am having an issue with my HP Officejet Pro 8500 A909a Series (about 4-5 years old) where it has stopped printing Cyan completely. I have had this issue about 2-3 months ago which was solved by cleaning the cyan and magenta print head. After cleaning the print head this time it has not solved the issue.
    If I dab the print head onto a lint cloth cyan and magenta ink comes out so I don't think it's an issue with the ink getting to the printhead so have ruled dried up pipes out.
    I have done the standard troubleshooting with no luck. According to the print quality diagnostics page all cartridges are at atleast 30% and above and Printhead health claims to be 'Good'.
    This all leads me to believe it must be some kind of technical issue rather than physical, something wrong with the printhead chip not allowing it to dispense Cyan ink?

    Hello @12MattC,
    Welcome to the HP Support Forums! I see you are not able to print in Cyan ink on your HP Officejet 8500 A909a, usually you can clean the printheads and the Cyan will come back, but this time that did not help.
    I would like you to make sure you complete ALL steps listed here: Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Officejet 6500A e-All-in... (Printer listed is the 6500, same steps apply to the 8500)
    Please let me know the outcome, if you are still unable to print in Cyan ink call our technical support at 800-474-6836 to see what options they have available for you. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Printer won't print text documents

    My HP 4300 series all in one printer prints images but won't print text from word processor documents.  If I print a test page it will only print the image part but none of the text will appear.  Blank pages are printed when I attempt to print text from a word processor however images are printed perfectly from web pages etc.  Any help would be greatly appreciated so that I can have full functionality of my printer again. 

    Hello
    See if the link will help you with the printing issues. 
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c00613428&cc=uk&lc=en&dlc=en&product=1138342&tmp​...
    Thanks
    Laura
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Can't print large document in landscape orientation

    I have a large document (16x32") that I am trying to print on a single legal sized page.
    I have landscape mode selected in Page Setup, yet when I select Print and tell it to print to a single Legal page (under Paper Handling I select Scale To Fit Paper Size and then select US Legal), it ends up printing in portrait orientation--even though the preview in the Print dialog box has it in landscape.
    I have printed this document before (a month or two ago) and it worked fine.  There have been I think 2 updates in the intervening weeks, has one of the updates changed something about printing?
    Is there anything I can do to fix this?
    Details: Pages 5.1, OS X Mavericks 10.9.1, MacBook Pro (late 2008)

    OK, guys, try this:
    Open Pages.
    Creat a new file.  --I picked the template "Blank" (which starts in portrait mode, mind you) in the "Basic" group.
    Go to File->Page Setup.
    Select Paper Size->Manage Custom Sizes.
    Click the "+" and create a new custom paper size.  Title it "Really Big Paper" or whatever.
    Make the paper size 34 wide by 56 high.  (Again, portrait orientation).  Click “OK”.
    Make the paper landscape orientation and click “OK”.
    Put something in the file—like a big light gray box (make its Opacity <50% so you don’t waste ink) that fills up the whole page.
    Select File->Print
    Click the popup menu that says “Layout” and select “Paper Handling”
    Click the box for “Scale to fit paper size” and select “US Legal” as the Destination Paper Size.
    Click the “Print” button.
    What do you get?  I get a gray box horizontally across the middle third of a portrait oriented page.  What I want is a page almost entirely filled with gray, which is what would happen if it really printed in landscape mode.
    You can fool around with the custom paper size and start with it shorter on width or shorter on height, but if you want to print a document that is large and is wider than it is tall, when you print it on a single page, it will always print **across the middle of a portrait oriented page** and not in landscape mode.
    I can repeat this on both my HP and Canon printers.  Same result.  So it isn’t the print driver, unless you think HP and Canon have the same bug in their print drivers (fairly unlikely, I would guess).  You can print to PDF and you get the same result, too.
    Again: printing worked fine for me a few weeks (and one or two Pages updates) ago!

  • Pages won't print Word documents

    All of a sudden I can't seem to get Pages to print Word documents. Pages documents print fine, but if I send a Word document to the printer, the printer seems to start, but then never prints. I have an Epson Stylus C86. This problem only happens in Pages and only with Word documents.
    Any ideas?

    Since it only happens with Word docs, I'm wondering if it's a font issue. For the sake experimentation, try highlighting the entire doc, and change fonts, then try printing again.
    -Dennis

  • Epson Stylus Photo R2400 won't print large pages?

    I recently upgraded to Mac OS X Leopard. I immediately had problems with printing to my Epson Stylus Photo R2400 as a print driver gutenprint had suddenly replace my Epson driver when going thu dialog to print. Called and Epson and they got me thru process of getting rid of the newly replaced gutenprint to an Epson driver. Problem is I can't print anything larger than an 8.5x11 page. The printer set up says and shows me that what I have set as an 11x17 or 13x19 is going to print. But all that prints on this large expensive paper is an area 8.5x8.5. No matter what I change in set up. Epson says they have done all they can do. (And I just found out last week they have replaced this printer with another printer). I have hundreds of dollars in newly purchased inks and I am wasting expensive paper.
    Also I had to remove the patch for OS leopard to get the printer to work in this diminished capacity.
    And my email signature disappeared. Can't get that back either.
    But printer is my biggest problem. Any suggestions how to get this printer to work with this new OS leopard and print large sizes? I have deadlines and hate to outsource the printing when I could easily do it in house.

    Well, you picked the very hardest way to do it, and as time goes on, you will probably discover many other things wrong with your system as well. You CANNOT go back to Tiger from Leopard via an archive and install; you have to wipe the drive and start over from scratch, and then transfer all your data over from a backup and reinstall most, if not all, of your applications so the right elements are in the right places. Even so you'll never get your system exactly back to where it was, unless you had a perfect bootable Tiger backup (via SuperDuper) and merely restored from that. Obviously whatever Leopard element that killed your printing capability is still on your frankenstein system of BOTH Tiger and Leopard parts.
    There are hundreds of posts on the issue of reverting to Tiger from Leopard, many quite detailed. So many things are changed from upgrading from one to the other that what you attempted (unless you completely wiped the drive and all your data) has always proven disastrous, which is why I highly recommended against it after reading hundreds of horror stories here.
    I suggest doing a search at downgrading from Leopard to Tiger, following those instructions if you can, and making the best of it. You'll find that springing the $200 for an external drive would have been a much better and easier solution, because it can come in very handy if you ever need to do any maintenance on your internal hard drive, or if some update or problems kill your internal drive and you can't even boot the system. Not to mention sooner or later always needing more storage capability, and even a drive for reliable backups.
    I would never dream of attempting a downgrade or needing to do it in the first place (having taken precautions as to never have to), so I can't give you any further advice than that.

  • Officejet Pro 8500 Premier won't print (Mac OSX 10.6)

    The printer is detected by my computer and is able to interact with it, but it refuses to print.  I restored factory settings with no luck.  I downloaded the HP software/drivers for my laptop, ran setup, everything worked...still won't print.  Any ideas please!?!
    Thanks!
    -Shawn

    Hi Stonesp85,
    Is there any error message pops out on printer front panel or on the PC?  
    Are you able to print out any self-test page like Product Status Report or Network configuration page ( in Setup -> Reports)?
    this is just a quick test for your printer hardware.
    to fully validate you printer hardware, I suggest you download "HP Hardware diagnostic Utility" in below link and run it:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/h...
    if there is no problem found on printer hardware, please make sure that you installed the right driver, below is the link for the printer driver on Mac OSX 10.6:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-85024-2&cc=us&dlc=en&lc=en&...=
    Hope it helps you.

  • HP Officejet pro 8500 A910 won't print wirelessly

    "An error has occurred. (devInfoPage-503)".
    I've had my Officejet pro 8500 A910 for less than 6 months.  It was an easy set up and printed and scanned perfectly for at least 2 months.  I use a wireless connection from my laptop which is running Windows 7.  Then a few months ago I started having problems scanning wirelessly from the printer pad, it would tell me that there was no computer connected. If I went to my laptop and went into the HP Document Manager it would scan the document and save it to my laptop just fine.  And I could still print - the laptop had no problem finding the printer.
    About a month ago I had a really big print job for work.  But I figured this was a sturdy printer and could handle it.  Towards the end though the printer would stop printing for no apparent reasoning with the keypad just showing the spooling circle and saying "printing".  The only way to get it to actually print was to unplug the computer, delete the print job and start again.
    Then for a while I had to do that every time I wanted to print, even after the "big print job" was long over, and still no scanning from the printer (will scan from the laptop).
    I've tried several times uninstalling and reinstalling the software.  I've checked to make sure the printer is included in the "home network".
    Today I reinstalled the software at the Control Panel on my laptop I get the green checkmark meaning the printer is set up and ready to go, but when I try to print a self  test page I get this message "An error has occurred. (devInfoPage-503)".  Any help in solving this problem would be much appreciated.  Thank you so much for your time.

    My Office jet has printed fine wirelessly for 6 months but started to not recognise the computer.  re starting worked for while but now it will not recognise the computer at all.  The computer says  Scanner communication cannot be established and the printer says it sees the computer.
    Why did it work but now won't?
    Thanks,
    Billy

  • Printer won't print word documents

    I have a photosmart all in one 58200 printer. My os is windows vista(unfortunately). Up until recently I had no problem printing my word 97 documents and all of a sudden either the pc or the printer decided not to print them. It will print anything else in Microsof office. The message I get is "The exception unknown software except (0x0000005) occurred in the application at location 0x76072266.
    I am out of work and need to print my resume'. HELP!!!!
    Thanks,
    Keala 
    This question was solved.
    View Solution.

    Hi,
    KEALA wrote:
    Do I download the free version of Open Office or the paid version.
    Thanks,
    Ke'ala 
    Open Office is free.  Don't pay for it. Download it from OpenOffice.org 
    regards,
    erico 
    Message Edited by erico on 10-03-2009 10:08 PM
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Printing settings - printing large document

    Sorry if this is a simple question.
    I have converted a word document which contains diagrams (enhanced metafiles converted from MS Visio),  It is a 76 page document, which I converted to PDF using PDF995 (only have Adobe reader).
    I tried to print the pdf but when it gets to the first page with a diagram on it, the printing gets stuck.
    The printer setting 'Page Scaling' was 'Shrink to Printable Area', I changed that to 'Fit to Printable Area', and although very slow the printing did work.
    My main point is, I need to send this pdf to senior managment, will they have the same issues when they try to print the pdf if their default setting is 'Shrink rather than Fit.
    Or is there something I can do to the images in the orginal document to avoid this issue in the first place.
    Sorry if this is an obvious question , but I would appreciate any help.
    Regards

    See *Printing 2 sided (duplexing) if your printer does not have the feature* :
    http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=181&mforum=iworktips ntrick
    Peter

Maybe you are looking for