850E and P4C 2.4?!

is it possible (fsb 800)

The E7205 chipset is the only chipset that "unofficially" supports 800FSB.  I doubt it would work.  EVEN if it did, it would likely see the multiplier of the 2.4C, lock it and multiply that by 133 instead of 200, because 850 doesn't handle 800FSB, not to mention the memory bandwidth is not great enough to properly support 800FSB CPU.  Heck, it's barely enough to support full 533 bandwidth considering that Dual-DDR266 is exactly 533, and RDRAM is a tad slower than that.
MR BREEZE
P4 3.0G 800FSB @ 3.45 G/230(924)FSB
MSI 875P Neo FIS2R Bios v1.5
Kingston HyperX3500 1GB Dual DDR433
ATi Radeon 9800 Pro @ 441/371
WD1200JB Primary Drive
Pioneer DVR-105 (unlocked firmware 1.33b)
2xWD2000JB on IDE in RAID-0
Antec TrueControl 550
Sandra MAX3! CPU: 11696
Sandra MAX3! Mem: 5565
3dMark2001SE: 20995
3dMark2003: 6848

Similar Messages

  • Any problems with??

    anyone had any problems with the following set up,
    875P NEO-FIS2R, corsair xms 3700pt ram ( 2 x 256mb ) and p4c 3.2
    many thanks,
    babyface uk

        Hi RPospisil,
    I'm sorry to learn that your phone has a cracked screen. I am a consumer too and I truly understand your discontent, as I would be upset if this happened to me. While dropping a phone is the most common reason for a cracked screen, screens can also break by excessive pressure while in pants pockets and others. I would not venture to guess how your phone's screen cracked, but phones can break even with a case on it. Lamentably, manufacturers' warranty is void once physical damage exists and processing an insurance replacement is the best alternative. Please visit this link http://bit.ly/07CrqPK to process your claim.
    AntonioC_VZW
    Follow us on Twitter at www.twitter.com/VZWSupport

  • P4c and MSI 6566

    Hi,
    I have just one question.
    Is there a posibility to put e.g. P4 2400C (800MHz fsb) on Msi 845e Max2 mainboard?
    If yes.
    - what BIOS changes do i need to make,
    - RAM - Kingmax DDR PC3200
    - Vhich VGA?
    Momentary configuration
    Celeron 1,7
    512 DDR Infineon PC2100,
    VGA ATI 7500 (AGP 4X, 64DDR, DVI)
    IBM 40G + WD40G HDD...
    If P4C does not work with this, then P4 3,066GHZ is the fastest cPU that can be used
    Please eMAi at [email protected]
     :idea:Thank You

    psu combined 3.3 and 5 v is?
    amps 3.3 and 5 v?

  • 850E MAX - Hyperthreading and 1066 RDRAM

    I just bought an 850E MAX to replace my Dell 8200/intel mobo. I know the 850E chipset supports P4 Hyperthreading, but don't see anything in the manual that refers to enabling it.  Also, I read some people have had problems getting 1066RDRAM to work on this MoBo. Has anyone had success using either with this board??
    This is my first MSI board and am anxious to see it perform.

    No one on the forum answered either of my questions, so I went to MSI Taiwan.
    The board WILL support Hyperthreading with a bios upgrade that is not posted on the website. i will not support anything faster than 800RDRAM.

  • MSI 850E Max2 aka MS-6592 and Vcore Settings

    Can anybody in here please tell me, what Vcore settings are possible with this mainboard. (manual said nothing)
    but i'm just interested in vcore settings below default - > menas 1.5V and lower.
    So, if it's possible to undervolt the CPU, then please tell my how low you can get and how you did you do that. (BIOS and/or FuzzyLogic)
    thanks in advance

    you can buy one at this site
    http://www.isaacsystems.com/products/components/view2.asp?offset=10&type=Motherboards&code=Socket%20478%20(Pentium%20IV)
    in usa too

  • 850E Max and 1066 RIMMs

    I know this was posted once before but the thread hit a dead end.  Has anyone figured out what the heck you're supposed to do about the motherboard not reading the 1066 modules?  Yes, I've switched them around in different configurations, but to no avail.  I have no other way of getting this thing to work and I just spent 1300 dollars in computer parts to get a computer working  so I could work!  I need to know if there is a fix, and if there is what do I do?  If not, I need to return this MSI board and go with someone who actually has a working 1066 board.  This is unreal.  Thanks for any responses.
    Feel free to email me at [email protected] or even to call me at 706-657-3959.  Call collect if you have to.  I don't care...I'm just in a real bind right now. ;(

    PSU is a Thermaltake 420 Watt...VGA is a Chaintech GeForce 440 MX...
    I've tried putting the memory in the different slots to no avail.  Even with all the cards and cables disconnected it won't get past the memory.
    Thanks for your continued help.  )

  • Mac Mini and Philips 32PF9966 LCD

    Hi all, I've posted this on another thread but no one's replied yet,
    hope I will get more attention here!
    I just got a mac mini C2D and hooked it via DVI to my philips 32pf9966 flat tv HDTV ready. The panel has a DVI socket so I used a DVI cable. The mini automatically resolved to 720x1280 50 hz resolution, the TV would recognize the input as 720p but the characters are bloated and the top, bottom,left and right edges bleed off the screen. If I choose from the mac the 768 x 1024 resolution, the top and bottom edges are fine, the characters are perfectly readable, but I have black borders on the right and left sides. The TV recognizes an XGA input.
    From my TV spec, I see that the supported resolutions are:
    Computer
    Res. Refresh rate
    640 x 480 60Hz
    800 x 600 60Hz
    1024 x 768 60Hz
    1280 x 768 60 Hz
    • Video
    Res. Refresh rate
    640 x 480i 1Fh
    640 x 480p 2Fh
    720 x 576i 1Fh
    720 x 576p 2Fh
    1280 x 720p 3Fh
    1920 x 1080i 2Fh
    1920 x 1152i 50 Hz
    The 768x1366 is advertized as WXGA on the leaflet cover.
    The question is: I have DisplayConfigX but I'm afraid of making some blunders playing around with the settings since there are no clear instructions on the site...I tried using "timing" to set it to 768x1366 but the program automatically switched it to 1368. Is this OK? If not how do I adjust it to 1366? After I click "install", will I be able to use the other configurations I already have in the Mac mini display options or will they be cancelled?
    One last question: I'm in Italy, where allegedly the frequency should be 50 not 60Hz...Shall I go with 60 anyway?
    Thanks a lot for your patience.
    Andre

    Hi, thanks for you reply.
    Tonight I'll try the suggested settings and see if it works...
    Re the manual, I don't think I can post any attachments here, anyway here is the link to the technical spec sheet
    http://www.p4c.philips.com/files/3/32pf996610/32pf9966_10_psseng.pdf
    where you can see that is supports PC connection and res. up to 768x1366
    and here is the link to the manual:
    http://www.p4c.philips.com/files/3/32pf996610/32pf9966_10_dfueng.pdf
    on page 22 there's how to connect to a PC via DVI...
    Do you know whether switchresX would support 768x1366?
    Thanks again
    Ciao

  • Compatibility between macbook pro and an external monitor

    hi, i have a macbook pro retina 15'', with intel iris pro graphics 5200 and windows 8.1 .
    i try to install an external monitor (http://www.p4c.philips.com/cgi-bin/dcbint/cpindex.pl?slg=en&scy=pl&ctn=17S4SB/00) with mdp - vga adapter but the resolution it is very bad and it is impossible to calibrate.
    i install the driver of the monitor and the new driver of intel iris, i try every resolution but in the external monitor also 1680x1240 it's too big.
    instead with os x,  also 1280x1024 (recommended resolution), can be seen perfectly.
    help me I'm going crazy. thanks

    Then I would try connecting your display in the off state and then turn it on once your MBP is sleeping. It's possible the MBP, or display in fact, is getting confused.
    Also, always be sure your MBP has actually made into sleep by the pusating sleep indicator light. If it isn't pulsating it isn't sleeping.

  • Apple Digital AV Adapter mirror is pink and dull.

    Using the Apple Digital AV Adapter. iPad 2 - HDMI on a Samsung LN-T2642H and the picture is pink and dull. Both screen mirroring and video out is pink and dull. If I connect my iPhone 4 or my iPod Touch and use the adapter for video out the picture is fine however. Mmm, I'm stumped. Any ideas?

    Problem may have been fixed for me by flashing to the August 2010 firmware for my TV.  Originally had firmware from 2009 - the year I bought the TV.
    Philips LCD TV 32PFL7404H 81 cm (32") Full HD 1080p digital TV with Pixel Precise HD
    32PFL7404H/12
    Been watching NetFlix via the HDMI connector for over 30 minutes now without colours going pink or inverting.  Earlier today it was inverting within 5 to 10 minutes.
    http://www.p4c.philips.com/cgi-bin/dcbint/cpindex.pl?scy=GB&mid=Link_FAQs&view=a a12_view_partial.html&session=20110725172834_90.204.222.99&list=aa12_list_partia l.html&slg=ENG&ctn=32PFL7404H/12&dct=FAQ&refnr=0074838&faqview=1

  • Can I use the Speakers AirPlay Philips DS3880W with the new iPod and the new iPad?

    First, I´m Spanish so I can be bad writing in English!!
    I want to buy the Speaker AirPlay Philips DS3880W and I have got the new iPad and the new iPod, in the compatibility, in the information of the speaker, I can´t see them. Why? Althrought the software is the same, Can I use the speaker with them?
    Here is the link: http://store.apple.com/es/product/H6906ZM/A/philips-ds3880w-airplay-speaker?fnod e=77&fs=s%3DpriceLH&p=1

    I say yes. this page says:
    See all FAQs
    Does the product support iPad2 and the New iPad?
    Yes. The product supports iPad2 and the New iPad.
    http://www.p4c.philips.com/cgi-bin/cpindex.pl?ctn=DS3880W%2F10&dct=FAQ&faqview=1 &new_tmpl=1&refdisplay=C36_IPAD2_NEWIPAD_FULLSUPPORT&refnr=0085930&scy=HU&slg=AE N

  • My Firefox seems to be crashing every time I try to open multiple windows that seem to load slowly, overwhelm Firefox and make the whole thing crash.

    For example, it seems to happen a lot while on the Entertainment Weekly website, (though it happens often on others as well). If I am reading a page and try to pre-load several other articles into new tabs to read as well, it sometimes seems that opening more than a couple of tabs will cause my browser to crash completely while they are trying to load.
    Here are my last five crash reports, if that helps:
    <br />
    <pre><nowiki>bp-b2588361-76e7-40e9-850e-d50082121226 12/26/20124:12 PM
    bp-b6678d3b-ff9e-452e-8dd4-1b8b12121226 12/25/20128:34 PM
    bp-91a7b2d0-464a-48e0-9568-7dc5e2121225 12/24/20128:01 PM
    bp-56cf8129-fb89-4569-995e-096152121222 12/22/20125:02 AM
    bp-c6b332f0-2e8e-4f94-aa7b-4569b2121220 12/20/20123:15 AM</nowiki></pre>

    Unfortunately the linked crash report wasn't send or is empty (@ EMPTY: no crashing thread identified; corrupt dump) and doesn't include any data, so it is not possible to find the cause of the crash.
    Try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *https://hacks.mozilla.org/2010/09/hardware-acceleration/
    See also:
    *http://kb.mozillazine.org/Firefox_crashes
    *https://support.mozilla.org/kb/Firefox+crashes

  • 850e MAX withdrawn

    Has the 850e MAX been withdrawn?
    There was info. on MSI's site, now it's gone and can't find it anywhere.

    Lighten-up :D
    Yes, it's reposted and there's even a BIOS update for it.
    I've been interested for two months now, but still can't find anyone selling them in the states. ?(
    Anyone else see them?
    I think they're released in the UK - anyone have one - how is it?
     :D

  • Problems with X-wing Alliance and FX5600-VTDR128

    I recently switched video cards from a GeForce 2 to a FX5600-VTDR128.  After the change, I've found that the in-mission text in LucasArts' X-Wing Alliance game has become all garbled.  Has anyone else run into this, and if so, have you found a solution to it?  Thanks!

    Hi All.
    I have the same problem here and there are other people complaining about it here in Brazil
    http://pub32.ezboard.com/fcimffrm8.showMessage?topicID=200.topic
    (brazilian forum, please try to translate it using google language tools)
    I bought this card together with a new P4 system and was happy to play XWA again with it. The game runs perfectly except for those unreadable in-game text messages. My english is not to good so I need the text to perfectly understand the mission objectives and hints.
    Well, the game worked 100%  with my old P3 with a Geforce 2 MX for three years. It seems like the problem is known by "professional XWA Players"  but nobody has a fix or a workaround to this problem.
    I tried all patches (v.2.01 and v.2.02) for XWA  and the following drivers from NVIDIA:
    Detonator 45.33
    Forceware 52.16
    Forceware 56.72
    I hope someone from MSI or NVIDIA read this thread  to help verify where the problem resides, and why just FX 5200 and FX 5600 customers are affected.
    In time...X-Wing Racer  and Unreal tournament 2004 Demo works great here!
    My system
    2.4Ghz P4C
    Asus P4P800 BIOS REV. 1016
    MSI FX5200-T128 video card
    350W Power Supply (Seventeam ST-350BKP)
    Windows XP SP1
    Thanks!

  • 850e Max-ABL / 648 Max-BL info required

    does anyone have any specs/info on the the new 850e Max-ABL and 648 Max-BL mobo's ???
    nothing on the MSI site as yet....

    Spent some days trying to solve simmilar problems.
    Suddenly the computer hangs, or restarts, in two minutes or in few hours, randomely.
    (P4 2,4 533, Nvidia5200/128, PQI512/400,WD40JB, WINXPSP2 new installation)
    The most strange thing is that with open case it works much better, crashes maybe twice a week.
    Thought that inprooving cooling will solve the problem, I put two 8cm coolers, even Sandra and MBMonitor
    shows CPU temperature normal, never above 45C. And again, if open side case, it works(better), when closed
    it hangs !!!???
    3DMark03, hanged system almost iimediately, so I changed the VGA with another,
    and now it hangs on the end of tests.
    Tried to change processor (couldn't find the same) with Celeron D 2,4 - It could not start at all, later I found
    MB can't support necessary voltages for this CPU. (????!!!??)
    Finaly tried to change RAM with two PQI256/400. System could not even start BIOS.
    After crearin BIOS it starts, showing 512 MB, CL2. Next boot is impossible. Have to clear BIOS again, and
    only first boot is OK. Adding one or two 256MB pieces is impossible, too! It doesn't like it!
    Updating BIOS to V 1.5 changed NOTHING !
    On the end, I spent a lot of time to find this (very special) model of MB and i could not.
    It is 648 MAX, MS-6585 F1 VER 20A
    Any ideas ???

  • MSI blutooth key and USB 2

    Dear everybody
    I have a p4 with the desktop board d850EMV2, each time i plugged my usb bluetooth key , the system freez and i get a message at the right corner : power surge !
    or something like that: Power exceed the maximum ....
    i can not use my usb key on usb2 port , i check the bios , the usb is enable .
    please reply to me on my email address
    [email protected]
                                                 Thanks for your Help

    I have MSI 850E Max and happy about the board itself. Recently purcased a bluetooth device and wondering what does exactly means that this board support bluetooth ? Do I have to buy an USB/Bluetooth adapter or MSI migth have a bracket that will take bluetooth connection (I do see a jacket on MB).
    I have purchase msi mb with 2 optional brackets (2 ports USB, 1 USB + machine stauts). Have I missed something ?

Maybe you are looking for