850e Max-ABL / 648 Max-BL info required

does anyone have any specs/info on the the new 850e Max-ABL and 648 Max-BL mobo's ???
nothing on the MSI site as yet....

Spent some days trying to solve simmilar problems.
Suddenly the computer hangs, or restarts, in two minutes or in few hours, randomely.
(P4 2,4 533, Nvidia5200/128, PQI512/400,WD40JB, WINXPSP2 new installation)
The most strange thing is that with open case it works much better, crashes maybe twice a week.
Thought that inprooving cooling will solve the problem, I put two 8cm coolers, even Sandra and MBMonitor
shows CPU temperature normal, never above 45C. And again, if open side case, it works(better), when closed
it hangs !!!???
3DMark03, hanged system almost iimediately, so I changed the VGA with another,
and now it hangs on the end of tests.
Tried to change processor (couldn't find the same) with Celeron D 2,4 - It could not start at all, later I found
MB can't support necessary voltages for this CPU. (????!!!??)
Finaly tried to change RAM with two PQI256/400. System could not even start BIOS.
After crearin BIOS it starts, showing 512 MB, CL2. Next boot is impossible. Have to clear BIOS again, and
only first boot is OK. Adding one or two 256MB pieces is impossible, too! It doesn't like it!
Updating BIOS to V 1.5 changed NOTHING !
On the end, I spent a lot of time to find this (very special) model of MB and i could not.
It is 648 MAX, MS-6585 F1 VER 20A
Any ideas ???

Similar Messages

850e MAX withdrawn

Has the 850e MAX been withdrawn?
There was info. on MSI's site, now it's gone and can't find it anywhere.

Lighten-up :D
Yes, it's reposted and there's even a BIOS update for it.
I've been interested for two months now, but still can't find anyone selling them in the states. ?(
Anyone else see them?
I think they're released in the UK - anyone have one - how is it?
:D

850E MAX - Hyperthreading and 1066 RDRAM

I just bought an 850E MAX to replace my Dell 8200/intel mobo. I know the 850E chipset supports P4 Hyperthreading, but don't see anything in the manual that refers to enabling it. Also, I read some people have had problems getting 1066RDRAM to work on this MoBo. Has anyone had success using either with this board??
This is my first MSI board and am anxious to see it perform.

No one on the forum answered either of my questions, so I went to MSI Taiwan.
The board WILL support Hyperthreading with a bios upgrade that is not posted on the website. i will not support anything faster than 800RDRAM.

850E Max VCORE

Ok I am turned my VCORE up .25mv to get my processor speed up reliably and now if I turn my computer off I reboot and everything appears to work correctly except the screen doesnt show anything and the keyboard never gets any power. I then have to manually reset my Power Supply and then reboot. After this things work fine until I turn my system off again. Any ideas?

Hi there!
Is this something you are still interested in? I am OC'ing an 850e max with a p4 2,4 GHz processor. I run it at 3 GHz (FSB @ 168). I have some cold boot problems, and I am worried about my PCI /AGP speeds, although the only problem I have encounterede with that is when burning CD's with Nero. I have to throttle back to get Nero to work.
The cold boots are another story. I get some instances of no posting (same as what you describe).
It would be interesting to exchange some experiences, as this is not the best board for overclocking, but being stuck with it, we may as well make the best of it??!!!
Ciao!

MSI 850e Max - memory test show 480mb?

Greetings all - Forum newbie here
My question is as follows: I have a MSI 6545 850e Max mobo with 2 Kingston 256mb Rambus modules. On boot, memory test shows approx 480mb system memory, not 512. I'm curious as to where the other 32 megs went? I ran 2 SyncMax 128 meg modules with correct memory count....
System specs:
850e Max mobo
Intel 1.6 P4
512mb (2x256) Kingston ECC Rambus
MSI Geforce4 ti 4600 128 mb video
40 gig WD hdd

Well I did some checking and I have one Toshiba Rimm and one Kingston Rimm. Funny thing though - MSInfo ( just how reliable I'm not sure) says I have 512 megs physical ram, DX Diag shows 480 etc. Is there any memory checking program can provide undesputed results? Thanks for all the help so far guys :-)

P4 - 850e max (6545) overclocking

Hi all,
I am new to the forum. I am overclocking a msi 850e max (6545) with P4 processor @ 2.4 G. I have successfully managed to run it at 168MHz FSB (=>3.024 GHz), rock solid in all testing . I have 512 MB Infineon 600 MHz RDRAM, which I throtled back to 400 MHz in Bios, resulting in an op. speed of 504 MHz. I have adjusted Vcore to 1,55 V. I have adjusted the memory voltage with the jumper to 1,68 V. The system is rocksolid in all testing and has been going like this for more than a month, idle cpu temp is 39 C, and full load with prime 95 is 53 C. I am using stock cooling, but I did remove the heatsink (I was having 60 C and upwards under load), and reseated it with a resulting temp-drop.
I am experiencing some cold boot problems. I have spend days to find solutions for them, but with only some success up to now . I am inclined towards concluding that the cause is the HD or the ram. I get " Windows could not load because the following file is corrupt or missing : NTFS.sys, or isapnp.sys. These files are present, and at the following boot load without problem. So disk or ram what do you guys think?
I would also like to now if anybody has some more OC friendly bios for this board? any beta versions or modded versions???? It's so strange that MSI makes it possible to set the FSB and Vcore, but you cannot set any diveders for PCI and AGP.
I don't even now if perhaps the divider kicks in automatically once you get to 166 FSB instead of the standard 133?? Does anybody know?
Your help is highly appreciated!!!:biggthumbsup:
Ciao!

I don't have any trouble with the Radeon card, the display is perfect in testing and does everything It is asked for, even at FSB 177, when other items are crapping out on me.
My cold boot problems are not that bad btw, it does post most of the time, and rather hangs after loading the kernel driver. I found that instead of just trying a number of times till it boots, I press delete and enter BIOS setup, exit without save, and the PC boots OK!!
Are Rimms still sold & used? Does anybody know what make of new mobos with 850 chipset support Rimm modules right now?
Does anybody have experience in OCing the MSI 850E MAX board?

I only show one iCloud on my IPhone that can do a restore. I synced it with my MacBook Pro and I think that may have messed things up. Prior to that I have several backups. Will a "genius" be able to access the info I need?

I only show one iCloud on my IPhone that can do a restore. I synced it with my MacBook Pro and I think that may have messed things up. Prior to that I have several backups. Will a "genius" be able to access the info I need?

If things seem to be going haywire with your phone, it seems that it MAY be a software issue.
Now, that being said, that does not necessarily mean that it is a virus. Software issues do happen sometimes. It is probably just coincidence.
What you need to do is restore the device using iTunes. This will fix any software issues. After you have done this, you can restore from an iCloud backup.
iCloud does not back up the actual software, so no, the "virus" would not have gotten into the backups.
The link below provides steps on restoring your device using iTunes as well as how to restore from an iCloud backup.
http://support.apple.com/kb/ht1766
Don't worry! Everything should be back to normal if you follow these steps.

I used my bank card to get gold on a game for my boyfriend and now it won't let me download games to my iPod it keeps coming up billing info required what do I do?

I used my bank card to get gold on a game for my boyfriend and now it won't let me download games to my iPod it keeps coming up billing info required what do I do?

You need to add a valid payment method to the account. An iTunes gift card can be added.

Only able to view entered info. on PDF form when I preview it?

I was almost finished completing a 127 page form and when I went to open it today I was unable to view all of the information I have entered. The info. is no doubt there because I can view everything I've entered when I preview it but once I open the document completely I can't view anything, even if I click on the box. Any help would be greatly appreciated!

I don't think that's the problem because I just reloaded the original form and typed in a few entries and was able to view my info. I just submitted another question as I think the problem may be that the file has a lock icon but I have no idea how I locked it. Below is my entry. Any help would be appreciated!
PDF form has lock icon and I'm unable to view my information entered
This question is Not Answered.(Mark as assumed answered)
Nov 10, 2013 5:21 AM
Tags (edit): none (add)
I've been working on a 127 page pdf form for a couple of weeks and have saved all of my information multiple times. I recently opened the document to complete the form(I literally had 2 entries left) and I am unable to view any of the information I've entered. The information is no doubt still there because the original form is 7mb, and my saved form is 7.26mb. I am also able to see all of my information when I preview the document by opening the my documents window and clicking once to preview the form in the same window, however can not see any of my information when I attempt to edit it and open the form completely. I am using a PC, windows 7. I'm assuming I can't view my info. because I somehow locked it but I am not asked for a password when I open it. I recently downloaded the original form again and typed in info. and there is no lock icon when I save it under a different name and I'm able to view the info. entered. I have no idea how I locked the form or if this is the reason I can't view the info. when I open the documetn completely. Any help would be greatly appreciated. Thanks.

HT4597 Someone reset my iPhone and it was not me is there a way to find out how they were able to access my info?

Someone reset my iPhone and it was not me is there a way to find out how they were able to access my info?

There are two ways to reset an iPhone, 1) the user actually using the iphone can perform a reset from Settings, and 2) a user to knows the iphone's iCloud ID and password and do a remote reset.
I'm assuming you didn't personally reset it while on the iPhone, so my question is ... does anyone else know your iCloud ID and password? Have you set up multiple devices (perhaps belonging to other members of your family - something you generally shouldn't do, if you don't want to sync the same data to all devices in the family) and used the same iCloud ID on all of them? Perhaps a family member or a "friend" of a member used Find My iPhone to locate yours and remote wiped it.

Not able to find the source requirement of MRP RUN-(for planned order)

Dear All,
Actullay In MRP run system is generating 10000 qty in planned order but in MD61 there is only 3000 qty and no sales order requirement also exists for the same. And when i rerun the MRP by choosing option 3 in planning mode, then also it is generating the planned order for 10000 qty only but Iam not able find out the base requirement for that. Kindly suggest me the solutions.
Regards,
Krishna

Hi
In MD04 at bottom, you can see a button for pegged requirement, click there you will come to know the list of requirement. It is not only because of Planned independent requirement you maintain in Md61, it could be due to lot size in Material master, or if you have fixed vendor in sourcelist then it could be because of Minimum order quantity with the vendor, or it could be safty stock or reorder point maintained in Material master
Regards
Antony

Not able to find the source requirement of MRP RUN-(planned order)

Dear All,
Actullay In MRP run system is generating 10000 qty in planned order but in MD61 there is only 3000 qty and no sales order requirement also exists for the same. And when i rerun the MRP by choosing option 3 in planning mode, then also it is generating the planned order for 10000 qty only but Iam not able find out the base requirement for that. Kindly suggest me the solutions.
Regards,
Krishna

Dear balu
Check assembly scrap in MRP 1 view
and also check which lot size u r using
is it HB - replanishment up to maximum stock level
or FX - fixed order size
Kindly check
Regards
Sachin

ITunes needs to be able to find media info.

Like Windows Media Player iTunes should be able to find media info, update track info (id tags) and auto download album art.

What sort of Media Info do you mean? As far as I'm aware iTunes has always found tracknames, composers, year of release etc. for me when I rip CDs to put on my iPod through using Gracenote CDDB that is built in. If this doesn't happen, when you insert a CD just go Advanced>Get CD Track Names.
The only thing that it doesn't do is find the album art but you can just import it yourself. If you don't have the time to then there's a number of 3rd party apps that will do this for you - just look on google.

I have an iPhone4s. When I install apps, I have to give my Apple password first. That's okay. The last few apps I tried to download have opened another security window before they will install. The window says, "Security info Required. To help insure

I have an iPhone4s. When I install apps, I have to give my Apple password first. That’s okay. The last few apps I tried to download have opened another security window before they will install. The window says, “Security info Required. To help insure the security of your Apple ID we require additional information” When I select okay, the Apple ID Password window opens and asks for my Apple password a second time.
It doesn't happen with every app and I’m concerned that these apps may be trying to collent my password. Is Apple really doing a double check on my password?

See http://news.cnet.com/8301-13579_3-57413072-37/apple-ratchets-up-app-store-securi ty/ and http://www.macrumors.com/2012/04/12/apple-enhancing-apple-id-safety-by-enforcing -security-question-requirements/.

I get an error message saying "system overload, the audio engine was not able to process all the required data in time (10011)

i get an error message saying "system overload, the audio engine was not able to process all the required data in time (10011)

The thing is, that error message has been appearing when playing/recording a track that was running perfectly a few minutes ago and nothing has changed!
That can mean, that your project is too ambitious for your Mac. Are you using many complicated automations on that track?
4GB memory is not much, when doing audio processing. GarageBand will need all memory it can get, or will be forced to continually swap pages to your disk, to free RAM, and that can cause this error.
When this error occurs, it is best to restart the computer. This will free your RAM. Close all other applications that are competing for memory, i.e. other multimedia applications, and Safari.
Also, make sure, that you have plenty of free disk space. Don't let the free disk space drop below 20G.
Where is your project located? On an external drive or your internal drive? If it is on an external drive, connect this drive directly, not daisy-chained, or move the project to your internal drive.
I got up to eat, came back and tried to continue but GarageBand shuts down and displays that message every time I try to run the song. I've also recently run songs with several more tracks than this one and they worked perfectly. Any tips?
Are your other projects, that worked perfectly, still working?

850e Max-ABL / 648 Max-BL info required

Similar Messages

Maybe you are looking for