850e MAX withdrawn

Has the 850e MAX been withdrawn?
There was info. on MSI's site, now it's gone and can't find it anywhere.

Lighten-up :D
Yes, it's reposted and there's even a BIOS update for it.
I've been interested for two months now, but still can't find anyone selling them in the states. ?(
Anyone else see them?
I think they're released in the UK - anyone have one - how is it?
:D

Similar Messages

850e Max-ABL / 648 Max-BL info required

does anyone have any specs/info on the the new 850e Max-ABL and 648 Max-BL mobo's ???
nothing on the MSI site as yet....

Spent some days trying to solve simmilar problems.
Suddenly the computer hangs, or restarts, in two minutes or in few hours, randomely.
(P4 2,4 533, Nvidia5200/128, PQI512/400,WD40JB, WINXPSP2 new installation)
The most strange thing is that with open case it works much better, crashes maybe twice a week.
Thought that inprooving cooling will solve the problem, I put two 8cm coolers, even Sandra and MBMonitor
shows CPU temperature normal, never above 45C. And again, if open side case, it works(better), when closed
it hangs !!!???
3DMark03, hanged system almost iimediately, so I changed the VGA with another,
and now it hangs on the end of tests.
Tried to change processor (couldn't find the same) with Celeron D 2,4 - It could not start at all, later I found
MB can't support necessary voltages for this CPU. (????!!!??)
Finaly tried to change RAM with two PQI256/400. System could not even start BIOS.
After crearin BIOS it starts, showing 512 MB, CL2. Next boot is impossible. Have to clear BIOS again, and
only first boot is OK. Adding one or two 256MB pieces is impossible, too! It doesn't like it!
Updating BIOS to V 1.5 changed NOTHING !
On the end, I spent a lot of time to find this (very special) model of MB and i could not.
It is 648 MAX, MS-6585 F1 VER 20A
Any ideas ???

850E MAX - Hyperthreading and 1066 RDRAM

I just bought an 850E MAX to replace my Dell 8200/intel mobo. I know the 850E chipset supports P4 Hyperthreading, but don't see anything in the manual that refers to enabling it. Also, I read some people have had problems getting 1066RDRAM to work on this MoBo. Has anyone had success using either with this board??
This is my first MSI board and am anxious to see it perform.

No one on the forum answered either of my questions, so I went to MSI Taiwan.
The board WILL support Hyperthreading with a bios upgrade that is not posted on the website. i will not support anything faster than 800RDRAM.

850E Max VCORE

Ok I am turned my VCORE up .25mv to get my processor speed up reliably and now if I turn my computer off I reboot and everything appears to work correctly except the screen doesnt show anything and the keyboard never gets any power. I then have to manually reset my Power Supply and then reboot. After this things work fine until I turn my system off again. Any ideas?

Hi there!
Is this something you are still interested in? I am OC'ing an 850e max with a p4 2,4 GHz processor. I run it at 3 GHz (FSB @ 168). I have some cold boot problems, and I am worried about my PCI /AGP speeds, although the only problem I have encounterede with that is when burning CD's with Nero. I have to throttle back to get Nero to work.
The cold boots are another story. I get some instances of no posting (same as what you describe).
It would be interesting to exchange some experiences, as this is not the best board for overclocking, but being stuck with it, we may as well make the best of it??!!!
Ciao!

MSI 850e Max - memory test show 480mb?

Greetings all - Forum newbie here
My question is as follows: I have a MSI 6545 850e Max mobo with 2 Kingston 256mb Rambus modules. On boot, memory test shows approx 480mb system memory, not 512. I'm curious as to where the other 32 megs went? I ran 2 SyncMax 128 meg modules with correct memory count....
System specs:
850e Max mobo
Intel 1.6 P4
512mb (2x256) Kingston ECC Rambus
MSI Geforce4 ti 4600 128 mb video
40 gig WD hdd

Well I did some checking and I have one Toshiba Rimm and one Kingston Rimm. Funny thing though - MSInfo ( just how reliable I'm not sure) says I have 512 megs physical ram, DX Diag shows 480 etc. Is there any memory checking program can provide undesputed results? Thanks for all the help so far guys :-)

P4 - 850e max (6545) overclocking

Hi all,
I am new to the forum. I am overclocking a msi 850e max (6545) with P4 processor @ 2.4 G. I have successfully managed to run it at 168MHz FSB (=>3.024 GHz), rock solid in all testing . I have 512 MB Infineon 600 MHz RDRAM, which I throtled back to 400 MHz in Bios, resulting in an op. speed of 504 MHz. I have adjusted Vcore to 1,55 V. I have adjusted the memory voltage with the jumper to 1,68 V. The system is rocksolid in all testing and has been going like this for more than a month, idle cpu temp is 39 C, and full load with prime 95 is 53 C. I am using stock cooling, but I did remove the heatsink (I was having 60 C and upwards under load), and reseated it with a resulting temp-drop.
I am experiencing some cold boot problems. I have spend days to find solutions for them, but with only some success up to now . I am inclined towards concluding that the cause is the HD or the ram. I get " Windows could not load because the following file is corrupt or missing : NTFS.sys, or isapnp.sys. These files are present, and at the following boot load without problem. So disk or ram what do you guys think?
I would also like to now if anybody has some more OC friendly bios for this board? any beta versions or modded versions???? It's so strange that MSI makes it possible to set the FSB and Vcore, but you cannot set any diveders for PCI and AGP.
I don't even now if perhaps the divider kicks in automatically once you get to 166 FSB instead of the standard 133?? Does anybody know?
Your help is highly appreciated!!!:biggthumbsup:
Ciao!

I don't have any trouble with the Radeon card, the display is perfect in testing and does everything It is asked for, even at FSB 177, when other items are crapping out on me.
My cold boot problems are not that bad btw, it does post most of the time, and rather hangs after loading the kernel driver. I found that instead of just trying a number of times till it boots, I press delete and enter BIOS setup, exit without save, and the PC boots OK!!
Are Rimms still sold & used? Does anybody know what make of new mobos with 850 chipset support Rimm modules right now?
Does anybody have experience in OCing the MSI 850E MAX board?

Does msi 850e max can work with 533 mhz Prescott cpu?

Hi
I am using msi 850emax mainboard with 533 mhz p4 2.8 cpu without ht.
I want to buy a 533 mhz Prescott cpu with ht.
Can it work on msi 850 e max mainboard?
Thanks
Magicboy

http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=345
nope

850E Max & ATA 100 DVD

I recently swapped my motherboard from the 850 Pro to the 850E, on the old board I had a Asus x16 DVD running at ata 100, now on the new board the DVD is running at ata 33, really wierd ??
Any idea's ??

Is it possible you placed the CDRW and the DVD on the same IDE cable? If you have 2 drives of different ATA speeds on the same IDE port, you'll only get the lower of the two on BOTH drives.
It's possible you may have bus mastering disabled in the BIOS or may not have the bus mastering drivers installed in Windows.

MOVED: MSI 850E Max Pentium 4 Motherboard FSB memory

This topic has been moved to Intel P4/Celeron boards.
https://forum-en.msi.com/index.php?topic=130931.0

That stuff sure is expensive.
http://www.memoryc.com/computermemory/rambusrdram/512mbelpidaeccpc800.html
Delivery cost page from there (to Norway): http://www.memoryc.com/pages/shipping_detail.html?countryc=NO

850E Max and 1066 RIMMs

I know this was posted once before but the thread hit a dead end. Has anyone figured out what the heck you're supposed to do about the motherboard not reading the 1066 modules? Yes, I've switched them around in different configurations, but to no avail. I have no other way of getting this thing to work and I just spent 1300 dollars in computer parts to get a computer working so I could work! I need to know if there is a fix, and if there is what do I do? If not, I need to return this MSI board and go with someone who actually has a working 1066 board. This is unreal. Thanks for any responses.
Feel free to email me at [email protected] or even to call me at 706-657-3959. Call collect if you have to. I don't care...I'm just in a real bind right now. ;(

PSU is a Thermaltake 420 Watt...VGA is a Chaintech GeForce 440 MX...
I've tried putting the memory in the different slots to no avail. Even with all the cards and cables disconnected it won't get past the memory.
Thanks for your continued help. )

850e MAX

Ok, I can't read the news story about this board for some reason. Could someone post the stats on it. And also, does anybody know what the expected release date on it is?
Thank you

I'm curious too. Before they re-did the site, it said "NEW". Do they announce it as new before it's released? Can't find it or info on it anywhere. ?( :P

MSI blutooth key and USB 2

Dear everybody
I have a p4 with the desktop board d850EMV2, each time i plugged my usb bluetooth key , the system freez and i get a message at the right corner : power surge !
or something like that: Power exceed the maximum ....
i can not use my usb key on usb2 port , i check the bios , the usb is enable .
please reply to me on my email address
[email protected]
Thanks for your Help

I have MSI 850E Max and happy about the board itself. Recently purcased a bluetooth device and wondering what does exactly means that this board support bluetooth ? Do I have to buy an USB/Bluetooth adapter or MSI migth have a bracket that will take bluetooth connection (I do see a jacket on MB).
I have purchase msi mb with 2 optional brackets (2 ports USB, 1 USB + machine stauts). Have I missed something ?

MSI 850EMax vs. HT

Dear All,
I have above mentiond MB and i would like to know,if there is any way to support HT there. In CPU compatible list there is 3,06 HT not mentioned to work. It requires PCB rev. 2.0 with 32 bit RIMMS. Is there even unofiicial way, how to enable there HT? I am using another MB, but i would like to sell it and custommer i have requires HT suppoort.
Thank you for any idea.

Hi,
It was the website mistake. 850E Max CAN support HT.

Cooling problem??? heeelp me

I have just bought a MSI 850E max 2 mainboard and I like it BUT I have a temperature from my processor I have 50° when I do nothing, I think that's too high no?
it's a P4 2.53GHz with originel intel cooler in a well ventilated case, 2 80mm case fans in front ( intake)
2 80 mm case fans in the left door for intake and one for outtake
and 2 80 mm fans in the back for outtake
and the fan of my prossesor is installed correctly.
but I saw something odd on the form of the mainboard, it didn't fit well into my case and it was caused by the form of the mainboard.
where the processor is in stalled the mainboard is a bit like this : -------- ----------
the middle place where the processor is is a bit lower is it a fault in the board or is it normal?
What temperatures do you have?

i dont get your question about the mounting.
what HSF are u using? if its stock intel your temps are about right

WHEN TRYING TO OPEN FIREFOX, GET MESSAGE PATFORM VERSON 8.0 NOT COMPATBABLE WITH MIN VERSION 7.D MAX VERSION 7.D

I AM TRYING TO OPEN FIREFOX, AND GET A URL MESSAGE: PLATFORM VERSION 8.0 NOT COPATABLE WITH MIN VERSION 7.D MAX VERSI 7.D

If you use ZoneAlarm Extreme Security then disable Virtualization and reinstall Firefox.
*http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
See also:
*[[/questions/880050]]

850e MAX withdrawn

Similar Messages

Maybe you are looking for