8520 Black Screen then reboot
Ive only recently started to get this problem, basically my blackberry will just reboot it self without no warnings or anything, it will go to a black screen with the LED flashing red twice before resenting itself, ive looked around and found no solution to this problem and i have tried a battery pull and even left it for 5 minutes without the battery but the this problem keeps re-occuring. Also lately i havent been able to recieve calls and call anyone with it sending me straight to answer phone and also with mine i dont know if this is a problem with my supplier (which is t-mobile) But i can still get through after a few attempts. I have had this model since August so its still new.
Any help would be apprciated thanks
Greetings, and welcome to the forums!
Do you have a media card installed? If so, try removing it and rebooting the phone to see if that makes a difference.
You might also try removing the sim card and rebooting to see if your sim card is the problem.
"Cats may taste like chicken, but they have more bones than rabbits."
Blackberry 101
Tips & Tricks
Videos to learn from on youtube
Similar Messages
-
Macbook pro continuously black screening and rebooting-any solutions?
Ever since upgrading OS to Mountain Lion there have been numerous times when waking the Macbook, it goes to black screen and reboots. Several times it has rebooted then immediately shut down and rebooted again. I am also running Paralles 9 which I needed to install after upgrading to the OS 6 operating system. Has anyone else had this problem and is there an easy fix?
You might try this:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
as of today when i plug my 7th generation ipod that i just got for christmas 2012 my pc shuts down to a blue screen with alot of writing then to black screen with alot of writing then to an all black screen then and windows error message my computer is ingood condition no malicious malware and has been clean i need help
thank ycjlet me get back with the answer with what the messages say on the blue screen and the black screen if i can read them fast enough before it shuts down i have windows 7 professional
-
i bought a locked at&t phone....
i sent it to be unlocked... got back a dead iphone 5s...
plugged the charger in the wall, it gives me a black screen then the white screen with the apple logo, then repeat....
i tried the dfu thing and now the phone is saying connect to itunes, when i plug the phone outta the wall, the phone goes dead.....
plugging the phone into the laptop NOTHING!!!!!!!!!!!!!!!!!!!!!
the laptop doe read my phone.....
no ding.....
the phone wont turn on....
NOTHING
can someone plz tell me what the **** is going onmariidb wrote:
i bought a locked at&t phone....
i sent it to be unlocked... got back a dead iphone 5s... {snip}
the phone wont turn on....
NOTHING
can someone plz tell me what the **** is going on
That's the problem. That's what the **** is going on. -
My iphone 5 died so I plugged it back in to charge and it will not turn on. It will turn to the screen with the apple logo and black screen then turn off again. Any suggestions?
I leave it charging until it gets back to full, usually it turns on after a little bit of time after plugging it in, but all its doing is going to the apple logo screen and going blank again.
-
MBP restarting after sometime automatically,initially shows black screen then restarts automatically?
this is happening all of sudden now?Interval Since Last Panic Report: 5 sec
Panics Since Last Report: 1
Anonymous UUID:
Sat Apr 6 03:00:26 2013
panic(cpu 2 caller 0xffffff7f84f957f2): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff8080fc1000 0x0a5480a2, D0, P3/4
Backtrace (CPU 2), Frame : Return Address
0xffffff8080bbaf80 : 0xffffff800481d626
0xffffff8080bbaff0 : 0xffffff7f84f957f2
0xffffff8080bbb0b0 : 0xffffff7f850923b9
0xffffff8080bbb110 : 0xffffff7f8509242e
0xffffff8080bbb180 : 0xffffff7f853b8c82
0xffffff8080bbb2b0 : 0xffffff7f850b8fe8
0xffffff8080bbb2f0 : 0xffffff7f84f9d567
0xffffff8080bbb3a0 : 0xffffff7f84f9b05a
0xffffff8080bbb5a0 : 0xffffff7f84f9c983
0xffffff8080bbb670 : 0xffffff7f8601a790
0xffffff8080bbb730 : 0xffffff7f86045f98
0xffffff8080bbb7b0 : 0xffffff7f8602d308
0xffffff8080bbb810 : 0xffffff7f8602dbe9
0xffffff8080bbb860 : 0xffffff7f8602e09b
0xffffff8080bbb8d0 : 0xffffff7f8602e8d1
0xffffff8080bbb910 : 0xffffff7f85ffa34f
0xffffff8080bbba90 : 0xffffff7f8602ae39
0xffffff8080bbbb50 : 0xffffff7f85ff8de8
0xffffff8080bbbba0 : 0xffffff8004c650c9
0xffffff8080bbbbc0 : 0xffffff8004c66670
0xffffff8080bbbc20 : 0xffffff8004c6408f
0xffffff8080bbbd70 : 0xffffff80048984a1
0xffffff8080bbbe80 : 0xffffff8004820aed
0xffffff8080bbbeb0 : 0xffffff8004810448
0xffffff8080bbbf00 : 0xffffff800481961b
0xffffff8080bbbf70 : 0xffffff80048a5dd6
0xffffff8080bbbfb0 : 0xffffff80048cdd43
Kernel Extensions in backtrace:
com.apple.NVDAResman(8.1)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f84f38 000->0xffffff7f85245fff
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f84ea3000
dependency: com.apple.iokit.IONDRVSupport(2.3.7)[38C214C0-83C8-3594-8A4C-DC6AC3FEC163]@0xff ffff7f84f24000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7f84ee1000
com.apple.nvidia.nv50hal(8.1)[5F021999-8B18-3BD5-9B98-90617E638A63]@0xffffff7f8 5253000->0xffffff7f85574fff
dependency: com.apple.NVDAResman(8.1.0)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f84f 38000
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f84ea3000
com.apple.GeForce(8.1)[A15BB65E-3501-340F-87CB-2FD2BAD33E35]@0xffffff7f85fe7000 ->0xffffff7f860b3fff
dependency: com.apple.NVDAResman(8.1.0)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f84f 38000
dependency: com.apple.iokit.IONDRVSupport(2.3.7)[38C214C0-83C8-3594-8A4C-DC6AC3FEC163]@0xff ffff7f84f24000
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f84ea3000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7f84ee1000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12D78
Kernel version:
Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
Kernel UUID: 3EB7D8A7-C2D3-32EC-80F4-AB37D61492C6
Kernel slide: 0x0000000004600000
Kernel text base: 0xffffff8004800000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 2850698695318
last loaded kext at 22285094662: com.apple.driver.AudioAUUC 1.60 (addr 0xffffff7f86293000, size 32768)
last unloaded kext at 230795989184: com.apple.driver.AppleUSBUHCI 5.2.5 (addr 0xffffff7f8582e000, size 65536)
loaded kexts:
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.12.87
com.apple.iokit.IOBluetoothSerialManager 4.1.3f3
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.3.7fc4
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleIntelHDGraphics 8.1.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.1.3f3
com.apple.GeForce 8.1.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMikeyDriver 2.3.7fc4
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleSMCLMU 2.0.3d0
com.apple.driver.ApplePolicyControl 3.3.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleIntelHDGraphicsFB 8.1.0
com.apple.driver.AppleLPC 1.6.0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMuxControl 3.3.0
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.driver.SMCMotionSensor 3.0.3d1
com.apple.driver.AppleUSBTCButtons 237.1
com.apple.driver.AppleUSBCardReader 3.1.7
com.apple.driver.AppleIRController 320.15
com.apple.driver.AppleUSBTCKeyboard 237.1
com.apple.iokit.SCSITaskUserClient 3.5.5
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.3.1
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AirPort.Brcm4331 614.20.16
com.apple.driver.AppleAHCIPort 2.5.1
com.apple.driver.AppleUSBHub 5.5.5
com.apple.iokit.AppleBCM5701Ethernet 3.6.0b1
com.apple.driver.AppleUSBEHCI 5.5.0
com.apple.driver.AppleEFINVRAM 1.7
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleACPIButtons 1.7
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.7
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.driver.DspFuncLib 2.3.7fc4
com.apple.iokit.IOAudioFamily 1.8.9fc11
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOSurface 86.0.4
com.apple.iokit.IOBluetoothFamily 4.1.3f3
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.1.3f3
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.nvidia.nv50hal 8.1.0
com.apple.NVDAResman 8.1.0
com.apple.driver.AppleHDAController 2.3.7fc4
com.apple.iokit.IOHDAFamily 2.3.7fc4
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleSMBusPCI 1.0.11d0
com.apple.driver.IOPlatformPluginFamily 5.3.0d51
com.apple.kext.triggers 1.0
com.apple.driver.AppleGraphicsControl 3.3.0
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.7
com.apple.driver.AppleSMBusController 1.0.11d0
com.apple.iokit.IOGraphicsFamily 2.3.7
com.apple.driver.AppleSMC 3.1.4d2
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.5
com.apple.iokit.IOUSBMassStorageClass 3.5.1
com.apple.driver.AppleUSBMultitouch 237.3
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleUSBMergeNub 5.5.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.5
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.5
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 522.4
com.apple.iokit.IOAHCIFamily 2.3.1
com.apple.iokit.IOUSBUserClient 5.5.5
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOUSBFamily 5.5.5
com.apple.driver.AppleEFIRuntime 1.7
com.apple.iokit.IOHIDFamily 1.8.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220.2
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 345
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.7
com.apple.iokit.IOPCIFamily 2.7.3
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i5, 2.53 GHz, 4 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.16)
Bluetooth: Version 4.1.3f3 11349, 2 service, 11 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: ST9500325ASG, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 5
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0xfa120000 / 4
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 7
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3 -
My iPhone 3GS on iOS 5.1 will randomly stop what I'm doing show a black screen then the spinning icon and then it shows my lockscreen. It takes about a minute to do this and it does it about 30 times a day. How do I fix this? It is EXTREMELY ANNOYING!
No, sounds like when you dropped it an cracked the screen it may have also damaged the logic board or the repair person damaged a cable.
-
Videos stopped playing correctly. Now I get a black screen, then a few seconds of video and it freezes. I downloaded the latest Adobe Flash player
and it did not change anything. Thanks for your help. CPOne of the following steps should help.
1. System Preferences > Other/ Flash Player > Advanced > Delete All
Press the "Delete All" button
Install Adobe Flash Player.
http://get.adobe.com/flashplayer/
Quit Safari.
Restart computer. Relaunch Safari.
2. Enable Plug-ins
Safari > Preferences > Security
Web Content: > "Enable Plug-ins".
or
Internet Plug-ins > "Allow all other plug-ins
3. Check whether you are currently in YouTube HTML 5 trial.
http://www.youtube.com/html5
At the bottom left of the page uncheck the box beside
"You are currently in the HTML5 trial".
4. Reset Safari.
Click Safari in the menu bar.
From the drop down select "Reset Safari".
Uncheck the boxes beside all items.
Check the box beside "Remove all website data".
Click "Reset".
5. Turn off Extensions, if any.
Safari > Preferences > Extensions
Now try YouTube.
Best. -
New ram installed and now have black screen then it shutsdown
ive installed an extra 2gb of ram on hp630 notebook and when i turn on it has a black screen then shuts down after 1 minute. i think maybe one of the slots dont work as the original 2gb ram that in it works in one slot but not the other . so when i put the 2gb ram in i get black screen then shut down but its the same it works in the bottom slot but not the top. any help would be a massive help.
Hi
Seems to be an issue with the Memory slot which need to replaced. In case if you unit is still cover by the warranty i would request you to call HP Technical support and get the System Board replaced.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath -
New ram installed and have black screen then it shutsdown after 45 seconds
ive installed an extra 2gb of ram on hp630 notebook and when i turn on it has a black screen then shuts down after 1 minute. i think maybe one of the slots dont work as the original 2gb ram that in it works in one slot but not the other . so when i put the 2gb ram in i get black screen then shut down but its the same it works in the bottom slot but not the top. any help would be a massive help. the slot i am trying to use hasn't ever been used.
Hi
Sorry meant to add , have you tried re-setting your BIOS to Default just to make sure 100% that your BIOS setting is not causing an issue .
Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem**** -
I opened my MacBook Pro to a dark gray/black screen. Rebooted several times with no success. Pressed the "sunrise" key several times with no success. Any suggestions to fix this?
Do you have AppleCare? Even if you don't, take to the Apple store and tell them what happened. They should help even though it's a few months out of warranty. You might have to talk to a manager or different higher up.
-
iMac keep shutting down black screen then have to hold power button down then turn it on again i did this 4 times in all of a period of 15 minutes what to do ??
Hmm. The problem still may be the RAM - Apple buys the RAM it puts in its machines from third-party vendors (usually Hynix) so it could be a RAM problem.
There are a couple of things that you can do yourself before taking your machine into an Apple Store or an AASP... download and run an application named Rember that will run a RAM test for you - let it run for a couple of hours or even overnight. If it turns out that your RAM is faulty, Rember will let you know. If it is faulty, then you have a couple of options - replace the RAM yourself or (particularly if you're under warranty still) take the machine to an Apple Store or AASP and have them replace the RAM.
If Rember finds no fault with the RAM, then you'll need to take it into an Apple Store/AASP and get a free diagnosis on the machine. Three beeps do usually indicate faulty RAM, but if it tests good with Rember you likely have another problem - it could be something as simple as the RAM, somehow, not seated correctly or signs of another hardware problem.
Run Rember first... call back with results.
Good luck,
Clinton -
Computer, black Screen and reboot problem
I have problems with my computer black screening and rebooting randomly recently. Tried a few things like downgrading the nvidia drivers and only using one monitorscreen.
I was using version 347.52 but downgraded to 344.11 but still got the problem
The times this happens can be anytime but happens most often while i'm playing games and at the moment i'm only playing on normal graphics while my graphics card should be well good enough to handle ultra graphics.
I used this program "WhoCrashed" and got this crash report:
On Sat 2015-02-21 18:29:08 GMT your computer crashed
crash dump file: C:\Windows\Minidump\022115-10420-01.dmp
This was probably caused by the following module: nvlddmkm.sys (nvlddmkm+0x91951C)
Bugcheck code: 0x116 (0xFFFFFA8010DD3010, 0xFFFFF8800FE0151C, 0xFFFFFFFFC000009A, 0x4)
Error: VIDEO_TDR_ERROR
file path: C:\Windows\system32\drivers\nvlddmkm.sys
product: NVIDIA Windows Kernel Mode Driver, Version 344.11
company: NVIDIA Corporation
description: NVIDIA Windows Kernel Mode Driver, Version 344.11
Bug check description: This indicates that an attempt to reset the display driver and recover from a timeout failed.
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: nvlddmkm.sys (NVIDIA Windows Kernel Mode Driver, Version 344.11 , NVIDIA Corporation).
Google query: NVIDIA Corporation VIDEO_TDR_ERROR
SPECS
Board: MSI Z97 Gaming 5
Bios: Version 1.0
VGA: MSI GeForce GTX 970 GAMING 4G
PSU: Chieftec "CFT-650-14CS" (18a 12v rail)
Intel Core i5-4690k Haswell 3.5GHz LGA 1150 88W
MEM: Crucial Ballistix Sport 2x8GB 1600MHz!
HDD: Samsung 256gb SSD
COOLER: NH-U12P SE2 CPU Cooler
OC: No overclock
OS: Windows 7 64bit ProfessionalI'm getting the same issue. Only in games.
On Sun 2/22/2015 1:32:14 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\022115-7160-01.dmp
This was probably caused by the following module: nvlddmkm.sys (nvlddmkm+0x7A3F38)
Bugcheck code: 0x116 (0xFFFFFA800DBEE010, 0xFFFFF880053E2F38, 0xFFFFFFFFC000009A, 0x4)
Error: VIDEO_TDR_ERROR
file path: C:\Windows\system32\drivers\nvlddmkm.sys
product: NVIDIA Windows Kernel Mode Driver, Version 344.16
company: NVIDIA Corporation
description: NVIDIA Windows Kernel Mode Driver, Version 344.16
Bug check description: This indicates that an attempt to reset the display driver and recover from a timeout failed.
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: nvlddmkm.sys (NVIDIA Windows Kernel Mode Driver, Version 344.16 , NVIDIA Corporation).
Google query: NVIDIA Corporation VIDEO_TDR_ERROR
Board: MSI Z97 Gaming 7 LGA 1150
Bios: Version 1.8
VGA: MSI 970GTX TWIN FROZRV
PSU: Seasonic ATX12V/EPS12V 750 Power Supply (SSR-750RT)
Intel Core i5-4690K Processor 3.5 GHz LGA 1150
MEM: G.SKILL Ripsjaws X Series 8GB (2x4GB)
HDD: Samsung 250G Evo Series SATA III Internal SSD
COOLER: Corsair H100I Liquid Cooler
OS: Windows 7 64bit Home Premium -
Black screen on reboot from windows to mac?
Hello,
A black screen is stalking me... I'd be much obliged if anyone can help.
The problem:
I have Windows 7 installed with Bootcamp. Every time I shut down / restart from Windows to get to the Mac side, the chime rings, but the screen stays black. I can tell the Mac is running though, because of the sound I hear when I press the volume up/down keys on the keyboard. Then, at some point (5 - 30 - 60 mins later) the computer decides out of nowhere it's time to unveil the desktop... This never happens when I reboot from the Mac side (unless I force shutdown while the black screen is still there).
Things I tried that didn't work:
- Command-Option-P-R to reset NVRAM (worked once but didn't fix it, and now when I try the screen stays black)
- Resetting SMC
- Apple Diagnostics came back with no issues found (when I restarted after the diagnostics, I got hit with the black screen again...)
- Erasing the Windows partition and reinstalling it.
Things I should probably mention:
The mac is a late 2013 iMac, Intel Core i5 with NVIDIA GeForce GT 750M, running OSX 10.9.1
I apologize if this has an obvious solution I somehow missed, or if it was answered in another post.
Thanks for your time.One way is to wipe the iPod clean and use it as a hard drive to carry the files over to the new comptuer. You must format the iPod in what's called Fat32, the older formatting for DOS. If you do this on a Mac, you use the Disk Utility to Erase the disk, and you choose MS-DOS for the format.
Then you plug in the iPod to the Mac, drag the iTunes Music folder to the iPod disk. Then you plug it into the Windows machine and drag the files to your iTunes folder there. See some instructions here:
http://docs.info.apple.com/article.html?artnum=300173
On the other hand, you might try using a 3rd party program that takes songs off the iPod. But Windows doesn't read the Mac files, I bet they won't help you move the music cross-platform.
Hope this helps... -
Fglrx install = black screen on reboot, cannot access any gui or cli.
Lenovo T60
ATI X1400
Core2Duo 2.0Ghz
i installed fglrx, and selected it in the xorg.conf, then rebooted, and didnt even get to GDM, all black, so i reboot, go into the failsafe option in grub, and still get a black screen, no text nothing.
What should I do? I really don't want to reinstall i just spent a while doing arch Linux for the first time, and like it so far.Borat wrote:
Thanks, but i get a kernel panic
kinit: Mounted root (ext2 filesystem) readonly
kinit: init not found!
Kernel panic - not syncing: Attempted to kill init!
btw, im using Reiserfs
if u got a kernel panic then U need to change the device to the one your arch partition is installed on. change the /dev/sdxx line. kernel panic means that it can't find the root file system to sync too. Or at least that is my understanding. If its not sda1 then what else is it? Its your pc u tell us, where did u install the arch partition to?
I'd say from the sounds of it, whatever is on sda1 partition is a ext2 FS, u need to find the reiserFS, but I may be wrong. Maybe u can't boot like that. Someone with some more experience will need to offer more help. But, if u can't then that's one reason why I don't use resierFS.
I have read before about some reason's why u would wanna keep the /boot partition ext3 for a reason, this was one of them.
Last edited by jacko (2008-01-06 15:32:52)
Maybe you are looking for
-
Reversal document type for cancelation of goods movement
Hi I have one queries, my client requirement is for every reversal document - document type should be YY. I created document type YY and maintain in every document type in FI for reversal document type. The document which is posted through FI and if
-
Volume button not working with Vista Business
Anybody knows what Toshiba Software should i install to be able to use the volume button in Vista Business? I have a Qosmio G20-102. Thank you.
-
MB pro has trouble seeing my new Brother MF****0CW on Wi-Fi
I just bought a new lazer printer, a Brother MF****0CW. My problem is that my MacBook Pro won't connect to i t via Wi-Fi. All drivers are installed and the printer is on my Wi-Fi. When I try to add the printer in preferences it can't find it. Any sug
-
Does anyone have suggestions for connecting my (non-Airport) iMac to my Hi-Fi system so that I can play music from iTunes, other than using Airport Express. Has anyone used Xitel products with their iMac?
-
hi , is there any way we can determine the size of objects in java ,like we have sizeof() in C. because till now I have only found functions in runtime class to determie the mem. as total OR max. OR free